M110K1 GBB What is up with this gun? | The Honest

#vfcm110k1 #gbbdmr #4UADthehonest
Note: The Valve knocker issue is fixed for the current production models (or just add some grease it)
if you run into some problems VFC Pentagon Service Center is there for you!
► profile.php?...
If you like these videos, using【🤍Super Thanks】help and support more creations
如果喜歡這類的影片，請大大的用【🤍超級感謝】支持我們繼續創作👍🏻👍🏻
Click here for subscribing our awesome stuff► / @4uadsmartairsoft
Go check out our new arrival【4UAD最新商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
For each of the test, here are the short cuts!
0:00 The Heat Remake/ Heat 複刻
0:50 Inside the Box / 箱子裡的東西
2:22 The Functioning Side /操做的部分
3:35 The Internals/內部零件
4:50 Hop up system/hop up 系統
5:18 Target Range /射擊測試
8:10 The Problems /本槍問題
9:12 Overall Feedback/本槍回饋
11:32 B Rolls /有趣畫面
12:18 The Conclusion/測試心得
13:19 Silent Dry/ 安靜乾防潮石
If You Don't Wanna Miss Any important informations, Follow Us On :
Facebook ► / 4uadsmartairsoft
Instagram ► / 4uadsmartairsoft
Airsoft Service Center ► 4uadsmartairsoft.com

[@4UADSmartAirsoft]

👇Sponsor & Any Good Stuff👇 👇影片裡的好東西在下方連結👇 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒 Special Thanks: ➤ VFC Airosft: They got a whole lot of trademarked guns 🛒Goods : www.vegaforce.com/site/index?lang=zh ➤ 普拉絲水彈運動場: 感謝貴場贊助拍攝地點,想烤肉玩水彈務必找他們! 🛒Goods : facebook.com/profile.php?id=100063918788979 ➤ Silent Dryt: The quiet way to keep your guns dry 🛒Goods : www.silent-dry.com/ ➤ACETECH: you guys do make some amazing tracers and chrono 🛒Goods : www.acetk.com/ 🛒 Amazon Goods : amzn.to/3sr5I2n ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! 🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html

[@BadaBingPictures]

Cats = Insta-like 👍 😸

[@4UADSmartAirsoft]

hahaha Cats are the best! and Great job on the WE G3A3 I enjoyed it too!

[@BadaBingPictures]

@@4UADSmartAirsoft Excellent honest review. Just the thing we need to see. And cats. Hah. Thanks, bro!

[@stewbacca117]

MORE CATS. More guns. 🎉

[@simonstokes369]

I love your videos. You have such nice energy and production value is brilliant.

[@4UADSmartAirsoft]

Thanks for the love buddy! Really appreciate it!

[@jehoshaphatbudiharjo5947]

Nice review as always guys! Keep it up!!

[@4UADSmartAirsoft]

Thanks man glad you like it

[@wasabiromo]

Great video as always!! Love from Spain

[@4UADSmartAirsoft]

Love from Taiwan!

[@markhitosis7964]

love your content man!

[@4UADSmartAirsoft]

Thanks buddy really appreciate the love that means a whole lot to us

[@dca224]

9:19 撞針的問題，VFC的AR系列V2版本都會有這樣的問題，還好5.56系列已經改成V3版就不會這樣了，但7.62系列就...........還沒改所以是V2版本，還有對了VFC的槍托裡的那根緩衝桿真心建議換掉，因為緩衝桿後面是鐵塊，每次射擊就等於是一把鐵鎚一直不停敲拖桿底部，已經看過好幾個案例把槍托桿打歪打爆的

[@4UADSmartAirsoft]

哎呦喂～～感謝我來換一下

[@carlosyu7874]

請問把緩衝桿換成Angry Gun的那個帶彈簧的版本會好些嗎？

[@DEAirsoftJerry]

一如既往地优质视频，期待你们更多的好活儿

[@4UADSmartAirsoft]

哥喜歡這影片真是太好了~我們繼續努力

[@tomconnolly6560]

never had a channel that just makes me giddy asf like a kid from the start it’s spectacular

[@4UADSmartAirsoft]

Thanks buddy really appreciate that! And glad you like it!

[@HuibvanderHart]

Realy like your content!! Its awesome. Go go go!

[@4UADSmartAirsoft]

Sounds good yo!! will make more!!

[@user-vx3vq9sr6j]

終於有人詳細介紹M110了

[@michaelfeldman9739]

I really enjoy your videos thank you keep them coming 🫡

[@4UADSmartAirsoft]

Will do sir!

[@jjsgame7683]

我愛這誠實系列~讚 這把感覺體質也很不錯....

[@4UADSmartAirsoft]

小小問題調教一下會蠻不錯的

[@aaronsilvia79]

Thanks for doing vids in english. Thats greatly appreciated.

[@4UADSmartAirsoft]

Sweet! Glad you like it man!

[@longbowsiu6806]

才一天已經過半數囉 希望可以看到升級影片 我必需承認 不愧是小賴 推廣產品很有一手 兩個廣告我都是完整看完的 很厲害！

[@4UADSmartAirsoft]

下面我們有溫馨的提供跳過廣告的空虛按鈕方案 XDDDD 感謝哥的支持啊!

[@Gelloadventure3808]

I'm excited for upgrade video 😊😊😊

[@4UADSmartAirsoft]

Lets see if this one hits that 20000 mark :D

[@jhzfn]

Am holding out hope the quad team can develop or collaborate with an OEM to build its own brand of products one day. Pen and clothing are great (have both already) but even some video game themed weapon would sell I bet.

[@4UADSmartAirsoft]

Will do man! We are working our way there!

[@user-gt8bv5zi9g]

@@4UADSmartAirsoft破兩萬觀看人數了，我現在真的很期待你拍改裝影片，同樣的我也因為你開箱，我也真的跑去買了這把❤

[@TheAntlu]

KEEP GOING !! nice job!

[@4UADSmartAirsoft]

Will do!

[@crumpet12345]

Great video as always, but Still waiting on that upgrade video guys!

[@4UADSmartAirsoft]

yah man we got the script ready after we finish M249 we will begin working on this one

[@BIGBACKGBBR]

Still one of the best Airsoft channels on yt, when are you boys coming for a game in the UK 😂

[@4UADSmartAirsoft]

Haha wish we can make it sometime in the future

[@lewisday3906]

I love your edits bro 😂

[@4UADSmartAirsoft]

Haha thanks man! Glad you like it!

[@lewisday3906]

@4UAD SmartAirsoft Absolutely no problem mate, I've never played airsoft or even owned an airsoft gun but I love your content and watching you build the weapons!🫶

[@ordinarylampshade4624]

Great video as always. Will probably get the lube pen in about a week.

[@4UADSmartAirsoft]

Sweeeet~ thanks for the support man!

[@Someone-ic5no]

Great video mate. May I suggest you some idea for the upcoming video, have you consider about doing a series revolve around this M110K1, such as upgrade, maintenance, in game performance, durability of the gun, and see how this gun perform under regular usage and maintenance in a long period of time.

[@4UADSmartAirsoft]

Yes! and especially the upgrade part! and thanks for the feedback man! Really appreciate that!

[@Someone-ic5no]

@@4UADSmartAirsoft looking forward to see more video, keep up the great work man 👍🏻

[@556nato_negev]

支持新系列

[@4UADSmartAirsoft]

感謝大大每次的飲料錢～喝的開心

[@Baktunmaya]

Thanks for the update. I will think 5 times before buy this rifle..

[@4UADSmartAirsoft]

It's not a terrible gun the small problems are fixable. For the stiker issue just add some lube :D

[@user-jz6rj2sh2c]

影片拍攝內容感覺很幽默風趣👍 誠實系列很有幫助，看到那些損壞的照片蠻嚇人也讓人難過，希望自己的槍不會這樣😂

[@4UADSmartAirsoft]

老實說VFC真的進步了不少，很多以前的問題都改掉了

[@chayze3009]

That's a good looking DMR. Not sure if I missed it in the video, but for others who are wondering: mag capacity is 20 rds 😃

[@4UADSmartAirsoft]

haha no you didn't miss anything, and we forgot to put that in

[@NanardPC]

Eh, you just granted another follower :D ! Road to the 20 000 views :p... (good rythm, good music, good humour and, afterall, a good review

[@4UADSmartAirsoft]

Thanks for the love yo! We got more on the way!

[@ArmandD]

Would love to see a honest episode for the RA-TECH WE M14 😄

[@4UADSmartAirsoft]

Its on the list!

[@BaconSlayer69]

I agree ☝️

[@user-cj3bx5df6y]

拍的精彩漂亮，貓貓出場鏡頭明顯增多，吸貓吸起來

[@4UADSmartAirsoft]

吸好吸滿

[@user-gd7pv3lc8d]

很快了.!😜

[@ZigzwagProps]

I went through a bit of a 'research' period when I was looking for a GBBR DMR platform, and this definitely was one of the ones that was on the list. However I found that from all of the reviews I've seen the gas capacity and the structural issues were really playing a strong negative against this rifle. I ended up selecting the Mk12mod0 from GHK just due to me already having magazines for that gun. This definitely would have been a sweet gun to play with for sure.

[@4UADSmartAirsoft]

That is also a good pick. The new Vfc did improve quite a bit, it’s just some small minor fixable issues.

[@javelinx1330]

Yeah VFC hasn’t really been doing to good lately, they really need to get there sh** together

[@ZigzwagProps]

I've heard with a lot of their gbbrs that they are quite nice quality wise, (I guess pending structural issues) but from what I've heard the stock hop up units have issues with tension on the rubber. That being said, the GHK mk12 I ended up going with, was unable to lift 0.3 BB's. So I ended up switching to the Maple leaf unit.

[@gundam8473]

我自己的SR25 ECC也有氣閥問題，觀察下來就是灌飽氣體的彈匣氣閥凸出來之後，插上彈匣會把頂針往上頂，導致上膛後縮不回去 另外初速不太穩，我是把切氣片拆除，出素會落在125附近但穩定很多(後座力會變小)

[@4UADSmartAirsoft]

這個可以來研究一下哈哈哈

[@ipyonl]

I enjoyed watching the video. I enjoy Airsoft in Korea and use the VFC HK416D GEN2 GBB costed almost 1750$. I'm very satisfied with using this product, but most VFC GBB products consider knocker springs to be quite problematic parts. I can't replace it Improved knocker unit in HK416 GEN3, MCMR, and XM177. But I hate that springs using GEN2. In any case, VFC GBB gives a fairly strong recoil with AR class and a very strong and satisfying recoil with stronger springs and option buffers. However, in order to use this optional part, you must first replace it with an original CMMR buffer retainer or a long buffer retainer such as DNA parts to prevent damage to the receiver pin break. In Korea, only 0.2g BB is available, The VFC HK416 basically has a narrow hop-up stick working, so I'm using it replaced with a TNT option chamber. In general, VFC hop-up rubber requires 0.25g BB or more, so unicorn or maple-leaf hop-up rubber is used when using 0.2g such as Korea or Japan. I am using TNT hop up rubber because I am using TNT. It is also good for 0.2g BB. More information is too long to explain for the Korean Airsoft community. If you have any questions, please ask us. Also to 4UAD, I've been thinking of content to review your subscriber's guns, do you have any thoughts to try? If there is I am thinking of lending you my VFC 416 GBB when I am ready.

[@4UADSmartAirsoft]

Dude thank you so much man, this is some really good feedback and some really good info to know! Really appreciate the time spend on this comment. And for gun reviews I think we can do users guns, it's just that receiving guns out of Taiwan is extremely troublesome, We don't want to risk losing your gun because of the import policy

[@ipyonl]

@@4UADSmartAirsoft Taiwan has strict laws like Korea. In Korea, we have to prove that it is a toy gun with a small base collar part such as an orange tip and a photo or evidence (which you rarely use) that proves it is a toy. In Korea, there is the worst pellet gun law in history that gas power should not exceed 0.2J under the law, so it is not a problem to send it, but it is very difficult to receive it.

[@ipyonl]

@@4UADSmartAirsoft Additionally, M110K1 is said to have receiver reinforcement, but SR25 has not yet been reinforced. Risk of breakage, VFC 7.62mm gun handguard upper finish issue. It seems to be a casting machine problem. In addition, the VFC NPAS nozzle has a significant variation in the elastic speed There are quite a few VFC nozzle internal breakage incidents. A terrible accident in which the inside of the cylinder split in half... Of course, even considering that, I think VFC is the second best to use for games after Marui... Maybe.. WE is too weak in durability Since GHK has a lot of QC deviation VIPER-TECH is too expensive.

[@LEsconz]

Just had my third game with it (the ECC version). It's very accurate with .36g bbs, even more with .40g. Shoots straight, stock hop up rubber is ok (60degres i think). 2 mags with one charge of gas is enough to go through 2 mags very easy. Only bad sides for me is that you have to locktite EVERYTHING, even screws on the mags. You need a Sr25 ecc/acc specific key to take out the outer barrel, wich wobbles after few hundred shots. The part on the bolt that catches the bolt stop is a screw that gets rounded at the bottom... so that part is a consumable. The screw that is holding the nozzle has a small o-ring, a bigger one will improve the seal. I had the issue with the valve knocker on the sr25 mod0 using Scar H mags, but never since i changed, and never on the ECC. Recoil is massive at around 150 psi, my whole field approved. The receiver is holding for the moment... With a bit of love and gbbr knowledge, i'm sure you can make this an accurate beast at 60-70m.

[@4UADSmartAirsoft]

Dude nice info buddy and yah I always do little bits of locktie to lock everything in place.

[@LEsconz]

@@4UADSmartAirsoft it’s a must on this one ! Very good video guys, keep making quality content 🔥💪

[@leoin103421]

謝謝!!請繼續衍伸此系列~非常有趣 順便也讓我知道原來我家這麼近的附近就有一個水彈場，不知道我能不能也去那邊打BB就是了 還有就是那個很潮的石頭，可以當作一般的除溼棒丟衣櫃之類的用途嗎~?

[@4UADSmartAirsoft]

那邊基本上是做水彈的活動,我們有時候拍片會去那邊(有先連絡老闆) XD 有要辦水彈活動可以聯絡普拉斯,他們蠻不錯的

[@user-uw2ul3br8n]

改裝能馬上再測試做比較嗎 很期待改裝後的效果🥰

[@4UADSmartAirsoft]

這片要來製作啦!

[@wick5888]

love this new concept ! can't wait to see the M 249 GBBR ! I was afraid that the grading system was over I am glad it will continue cheers from France ! (the French accent is present even written)

[@4UADSmartAirsoft]

hahaha thanks Wick! we will try our best to pump the grading system, and for M249? pelase stay tuned!

[@user-zn7ko9sv5m]

之前新手時期就直接買了VFC的槍下場玩了一天，隔天直接鐵手。

[@4UADSmartAirsoft]

我研究了很久最後得出~最好減輕裝備的方法是健身XDD

[@kylelincoln360]

Man seeing full length guns makes me want a vfc m16a1

[@4UADSmartAirsoft]

I bet is a hot one too!

[@williamchan1462]

I solved the problem u mention about the knocking pin. there is installation error in the hammer set.

[@4UADSmartAirsoft]

喔喔喔喔！ Damn bro! Would love to hear what the error is!

[@DavidBall717]

I have to say i do find your 4uad grading system much more informative on what guns to buy. Maybe this segment is something you could add on to the end, the "out on the field test" so your likes dislikes about the gun

[@4UADSmartAirsoft]

Yah it’s just that we need to find something to put in between each GS videos, as you know it takes quite sometime to complete each test. But still thanks for the input though

[@DavidBall717]

@@4UADSmartAirsoft what about gameplay with the guns your grading? 2 birds with one stone, then you have a new video and some footage for the GS video

[@Jerv165]

I have the 416a5 gen 3 which has almost the same FCG as that. Ive found that if you ride the trigger very slowly into the reset, sometimes it drops the hammer. I took it apart and lubed the FCG which made the problem occur less. If you let the trigger push your finger to the reset/wall it doesnt drop the hammer. But if you ride it, meaning you dont let the trigger push your trigger finger but instead slowly letting off pressure and riding it until the reset point, it drops the hammer about 5% of the time. There are no wear marks in the FCG whatsoever and i dont know how to fully eliminate the problem aside from not riding the trigger.

[@4UADSmartAirsoft]

That is some good info man, thanks for sharing

[@Live1509]

A thing to mention: performance during the cycle are also affected by the gas you will be using. On gbbrs it's preferable to use gas with very little or better without oil and lube the replica yourself. For example if you use Nuprol gas it will perform bad beacuse it's crap.

[@4UADSmartAirsoft]

Haha good point indeed

[@chichiboypumpi]

I fancy putting canted sights

[@4UADSmartAirsoft]

Lol

[@chimken1456]

Will you guys make a review of the TTI TP22?

[@4UADSmartAirsoft]

Will put it to our super long list

[@zacharychu2598]

柴可夫跟我家的貓根本兄弟!長得一模一樣 超萌 V家真的一直有在進步，小毛病解決了真的表現都很不錯 這隻跟GHK MK12比重量會差很多嗎?

[@4UADSmartAirsoft]

真的進步不少而且槍型也越來越多! 話說重量差不多真的就是選槍型了

[@sogerc1]

Quick question about the lubrication pen: when I press the back of the pen do I need to partially stick out my tongue like you did in the video?

[@4UADSmartAirsoft]

Yes it’s a must otherwise the pen wouldn’t perform as good. The longer your tongue is the smoother the lube gets lol

[@marcoescolin8981]

Any DNA GBB pls

[@andersonbofete9670]

Dude! What amazing video, just got mine (but in Brazil is such a pain in the ass to import it) but it will take sometime to put hand on it. Please upgrade it :))

[@4UADSmartAirsoft]

Dude thanks man and good luck on getting yours! I bet it cost a fortune!

[@andersonbofete9670]

Thanks for getting back with your videos, In my opinion is the best airsoft channel in KZbin. I really like the build you do in your ggbrs, like the way you guys produce the videos, the editing, even the “humor touch” such as the way you clap your hands asking for some helping haha. Just keep doing it … sure is on the right way! BTW, had inner barrel would I take? No sure about the bucking window. PDI for WMS wold works fine?

[@deevidwolf]

when will you do a review of the 417 vfc gbbr?

[@4UADSmartAirsoft]

Let me put that to my list

[@Walkingtarget205]

Great video, thanks for taking the time to make it. I recently bought one (M110) and I don't have the hand guard tool (ordered it but shipping to me is like forever!) Do you have any suggestions on how to remove the handguard (besides hammering the S$#T out of it!) Thanks again for sharing have a good one!

[@4UADSmartAirsoft]

I used a pin punch and lightly hammered the barrel nut, eventually I got it out hope this helps

[@Walkingtarget205]

@@4UADSmartAirsoft Thanks! I'll give it a shot. Looking forwards to future videos! Stay safe.

[@rejion1877]

This is a very interesting video. Can I add automatic subtitles? I wrote it through a translator

[@4UADSmartAirsoft]

Sure! Please do!

[@rejion1877]

@@4UADSmartAirsoft Thanks!

[@boddize]

之前有一把SR-25ECC 後定超快失效 槍機又非常重 某些材質較軟的金屬部件真的是缺點.............. 我許願RAtech能做出他專用槍機 就完美了

[@4UADSmartAirsoft]

對啊要是有一系列剛剛好的套件 （安裝後變五公斤哈哈哈

[@MargiAirsoft]

Tech AMSR video wit this beauty please 🙏🏻

[@4UADSmartAirsoft]

Haha will put it onto the list!

[@MargiAirsoft]

@@4UADSmartAirsoft Thank you. Also (sorry but this is totally unrelated to this video) do you plan on reviewing/teching WE products like the SVD or SVU ? Would love to see your take on that.

[@specterairsoftteam]

Its funny I just got one of these last week. But mine chronos 330fps with a .25g bb. 100% playing cqb with it lol. But the friction from the mag issue is a consistent problem. I have the exact same problem. With one specific mag its actually so tight the bolt cant move at all.

[@4UADSmartAirsoft]

haha for that case that is a production issue

[@GhostStalkerActual]

GHK needs to make one of these

[@4UADSmartAirsoft]

They should make a mp5 too

[@isaaciu5112]

這支跟GHK 14.5 inch RIS Ver2 M4 GBB 該選哪一支好...

[@4UADSmartAirsoft]

選喜歡的哈哈哈～

[@prinz_potatoe3639]

I know it´s 3 times the price but the gbls gdr 15 is everything good from GBB and AEG in one gun. I know i am annoying but pls get one and test it! I waited 3 month for the import to Germany and it was worth all the trouble. It´s super pricey and super worth it. Trust me O_O

[@4UADSmartAirsoft]

I wish I can test GBLS out too!

[@pigpigpigbig]

是不是也能開箱ghk的mk12做個比較呢？

[@4UADSmartAirsoft]

呼叫Ghk xDDD

[@luke_hong]

想知道小賴在射擊測試那段的背包是哪種

[@4UADSmartAirsoft]

Tmc 買的便宜水袋包

[@johnchrystfrancissandoval6247]

Hey boss pls review the ics peleador sss.iii. with the mastermod preupgraded. With suggestions for upgrade. Pls and ty😊

[@4UADSmartAirsoft]

Let me put that to my list

[@user-qp2nx6ey9f]

Hey, what’s the plate carrier you worn ? Is it easy to against your shoulder?

[@4UADSmartAirsoft]

這件『STG』TwinFalcons FCSK3.0 輕量化戰術背心 RG遊騎兵綠【現貨】 www.ruten.com.tw/item/show?22210140834018 蠻好穿的不會卡

[@user-qp2nx6ey9f]

感謝🙏

[@user-xf1oq8lh8w]

不好意思~請問護目鏡是什麼品牌的呢 好帥rrrr

[@4UADSmartAirsoft]

傳送門👉「藍貓戰術 - ARG」PYRAMEX I-FORCE 抗彈 抗起霧 雙層鏡片 真品護目鏡 香港SDU現役公發護目鏡 www.ruten.com.tw/item/show?22110093845207

[@cbbug1010]

氣閥連動桿的問題不是個案，但也不是每一把都會發生，我的三把SR25，一把ECC只有一把會頻率高的發生這個問題，並不是沒有其他問題，只是這個問題算是裡面最小的XD

[@4UADSmartAirsoft]

唉呦喂～～～～慘烈

[@KrITIK4L]

I'm a simple man... I see a cat (and a GBBR) and I press the like button :D

[@4UADSmartAirsoft]

you are the best

[@thewonderer3978]

What optics are you using here?

[@4UADSmartAirsoft]

Vortex crossfire 2 1x4

[@billmaragos2812]

Wouldn't the kick increase if you were to drill the bolt and reduce its weight ?

[@4UADSmartAirsoft]

I wonder if that would work

[@nelsonchang4881]

Silentdry, you gotta try! lol

[@4UADSmartAirsoft]

hahah thats a nice one too!

[@nemo1988]

1:36 触目惊心😂

[@4UADSmartAirsoft]

XDDD

[@yininjabackflip6713]

這片超棒

[@4UADSmartAirsoft]

看來此系列過關了哈哈哈

[@LosLos-Sensei]

猫奴，讚！

[@4UADSmartAirsoft]

眾卿平身

[@user-st3yf8ch7p]

希望以後有多一點類似這樣有說話的影片，開箱改裝升級都好，只有組裝聲音的"ASMR"觀看時實在太乾了

[@4UADSmartAirsoft]

哈哈哈好喔~放心未來這系列會越來越多

[@leequocanh5139]

Can you make a clip all your collection gun, gear, loadout 🤔🤔🤔

[@4UADSmartAirsoft]

Let me put that to my idea list thanks for the suggestion buddy!

[@misterhao1111]

希望会有we ak的评测

[@4UADSmartAirsoft]

We 真的得來測測看

[@misterhao1111]

@@4UADSmartAirsoft we 的ak应该是we的产品里面算是相当优秀的产品了吧

[@peedless4844]

no sounds exactly the same :D

[@jolexyam8251]

I Hope vfc make modern m4s with their new system instead of just re releasing the 416 or making retro rifles. Do y’all know if they’re working on anything?

[@4UADSmartAirsoft]

They didn’t speak a word haha

[@yuuuuuuu____40]

我的HK417 GBB HOP跳到最緊吃.45還是會飄，Hop倒是夠用🤔

[@4UADSmartAirsoft]

那這樣下壓很夠～～棒棒的

[@chiba3859]

4UAD make a gameplay video on WE m14 and VFC M110k1 😁🤩

[@4UADSmartAirsoft]

Will do!

[@yusheng386]

近期的733跟FAL打起來是很棒拉，但是就像影片提到的，小問題特多😬

[@4UADSmartAirsoft]

我其實超喜歡FAL的

[@user-pv8wp8zl2x]

請問733有什麼小問題，最近有考慮入手

[@yusheng386]

@@user-pv8wp8zl2x HOP調整打久了還是會鬆動 原廠外管打久會晃，可以換鋼外管解決 已換成十字軍鋼外管 護木箍很緊，可以將下護木稍微磨短一些 原廠槍機框開裂(這個問題不知道其他人有沒有，反正我是遇到了) 已換成VFC N4的鋼槍機 FAL打了7000多發，733應該也差不多(而且我733還是收二手的) 對了，buffer我換成警星的(需要將後面的半透明緩衝修短，否則無法後定)，並將原廠復進簧剪短到彈力剛好夠能夠使槍機回膛

[@hkairsoftsam7342]

想看開箱貓咪😊

[@4UADSmartAirsoft]

內構不能拆喔.....拆了就掛了

[@puretoxicityknuckles658]

i had the same problem with my bcm mcmr, cant believe vfc makes the same mistake on this platform.

[@4UADSmartAirsoft]

The valve knocker problem is solved by adding some grease to the valve knocker

[@elijahindoraptor9249]

Prefer the SCAR-SR or the PSG1 over this but they are much more expensive

[@4UADSmartAirsoft]

I need to get one tested

[@frankrogers9231]

Time for an upgrade video lol 😂

[@4UADSmartAirsoft]

We are working on it hahaha

[@xie2829]

vfc的m110和m110k1在性能上有什麼不同嗎，還是說看外觀喜歡哪個買哪個就可以了？

[@4UADSmartAirsoft]

另外一把沒有買所以我也不是很確定

[@xie2829]

@@4UADSmartAirsoft 謝謝回覆

[@TheStontslsr]

想看跟SSR MK20 MOD0有什麼差異?一樣VFC,一樣7.62,一樣很重

[@4UADSmartAirsoft]

看看能否弄到MK20了~

[@dungnguyenviet6921]

Hi everyone, let’s push it to 100,000 views 😊

[@4UADSmartAirsoft]

Thanks buddy! Hahaha let’s hope it makes it!

[@markola2870]

Irmao o que voce acha da mk18 da bolt ? Considera uma arma muito boa e de qualidade ?

[@4UADSmartAirsoft]

I’m not a huge fan of it haha

[@556nato_negev]

2.7萬了 敲碗

[@4UADSmartAirsoft]

準備中～～～～

[@Ray-gm2uk]

22k view, so upgrade video soon?

[@4UADSmartAirsoft]

Hahaha damn ok I will work on it!

[@eric20269]

我這人很簡單 有貓就有讚

[@4UADSmartAirsoft]

最喜歡簡單的人哈哈哈

[@user-th9ni2hr6x]

Blow up this video 😃

[@4UADSmartAirsoft]

改起來

[@blackkait]

希望改造會有加重buffer😂😂

[@4UADSmartAirsoft]

哈哈哈哈我來看看

[@GaosenKinetics]

To be frank and a bit harsh here: I think it's quite odd to talk about QC failures or strength issues with older guns, diff models, AEGs etc. instead of the actual gun at hand, which is done several times in the vid. In particular with AEGs since they're entirely different dimensions and product lines compared to their GBB guns. For potential issues with the specific gun at hand, like at 4:20, I honestly wish instead of saying "who knows" and making a face for the camera, you could have asked VFC what the changes made were (material change? dimension change? casting method or QC change?) - not many youtubers have as easy a time communicating directly with the companies in Taiwan as you guys, and being able to ask in detail some of those things is a place you could really add value that no other English-speaking youtubers can, so it's a little bit disappointing to see places like that where you just make vague statements and funny faces. The overall impression I got of this video was *extremely* negative towards VFC but without specificity, and it talked about issues from years past, which is unfortunate since VFC is frankly doing a great job right now improving their product lines (VFC V3 ARs are overall very good), and bringing out new and highly desired replicas (FAL, M249). I think that discussing past issues - with again the above caveat that mixing up AEG and GBB lines isn't good in my mind - is fine as well, but I think if you're going to talk broadly about a companies' reputation then the recent reputation and offerings are also important context. I'm also interested to see if you are similarly harsh towards other companies in the future; for example in the foreign (non-Taiwan) airsoft community, there's a lot of talk about how GHK has shipped entire loads of products with poor QC to the point of sometimes being almost non-functional out of the box.

[@TehPh1L]

100% agree. You can always critique a company for their other lines of product but letting that criticism bleed into another separate product review feels kinda dishonest and very far away from an unbiased/honest review concept. Like VFC is really not known for QC problems in their AR Gbbrs lineup compared to for example GHK AKs.

[@4UADSmartAirsoft]

Thanks for the input man, VFC is a tricky one because there are quite some haters and also quite some lovers. If I only talk about the goods the haters will hate and if I only talk about the bad stuff, lovers would hate too. So in conclusion I just decided I will talk about the good and bad without bias. Also this video was proven by VFC. But still thanks for taking the time to put in the comments, I will see what I can do to make this series better!

[@Conscript_Isaac]

Did you remember to quantum lube the insides of the valve knocker?😂

[@4UADSmartAirsoft]

Now I remember lol

[@male_walk]

求VFC的彈道細調教學🙏🙏

[@4UADSmartAirsoft]

幫忙分享~一禮拜20000view 我就教XD

[@BrianC_0225]

@@4UADSmartAirsoft 雖然知道沒用 但還是刷了幾次F5試試 有機會 會有耐用度的企劃嗎? 玩到後來都覺得 耐用度才是最重要的 玩具的性能再強 也就是那樣而已

[@male_walk]

@@4UADSmartAirsoft 這樣還有教學嗎😭差一點點

[@4UADSmartAirsoft]

@@male_walk 哈哈哈我看看排成應該有機會XD

[@carlosyu7874]

Ay, 21K views already. Time for an upgrade tutorial XD

[@4UADSmartAirsoft]

Hahaha damn it lol I will work on it!

[@billythesawlee7097]

Bruh, where's that field at, I want to visit those BMWs lol

[@4UADSmartAirsoft]

its a small field located at Taichung, you can find it thought the link we provided on the pinned comment

[@colin9254]

Hi, Is this semi only or can it be easily locked to semi?

[@4UADSmartAirsoft]

Its semi only :D

[@colin9254]

@@4UADSmartAirsoft Awesome, UK friendly DMR :)

[@dustwind]

Ecc我打八百多發就斷上槍結合耳了，修好之後立刻賣...

[@4UADSmartAirsoft]

還好這把打快2000發還沒出事⋯⋯雖然我蠻想拍到槍身斷掉的畫面哈哈哈哈