This couldn't sound any more badass, awesome truck man.
@wthiebert8 жыл бұрын
thanks, it's a lot of fun to drive.
@wthiebert Жыл бұрын
Hello all, I apologize for being so quiet for so long, I see a lot of people interested in the setup, we where renovating and building our house for the last 2 years and it left zero time to do anything else, last summer 2021 I didn't drive the truck at all, now in the last month of September and October I did drive it again, still running strong, now going in to winter again so I have to park it, but I will do a video on the setup to help you all out. Thanks for all the comments.
@supertrunks5194 Жыл бұрын
Dígame, qué motor es? Y que le cambió?
@NikkHorse-kx7yi8 ай бұрын
Looking forward to that
@Undertaker_Bass_Ride7 ай бұрын
Everything alright? It's been a year or more since you said this, I just got my 89 F150 running again and I know I've got to do a rebuild, but I think I want to add a turbo as well, not 100% sure yet but just commenting to see if you are good though, hoping to see a video this year of your setup
@Acaidia Жыл бұрын
That blow off noise is insane. This is one badass truck.
@that_blobeye_sti4 ай бұрын
turbo flutter is actually the result of not running a bov
@torque3952 жыл бұрын
1600 likes and zero dislikes. That says something right there. Thats awesome. I wanted a 5.0 turbo in my 87 but I ended up selling it. I miss it
@wthiebert8 жыл бұрын
I built my own headers I wasn't able to find a kit that would fit my truck so I bought a bunch of mustang stuff and made it fit,it works very good, that megasquirt is worth every penny.
@christianerickson44008 жыл бұрын
Did you have to convert to mass air flow?
@wthiebert8 жыл бұрын
+Christian Erickson no maf, speed density .
@christianerickson44008 жыл бұрын
+willy hiebert how does it run with SD? I'm reading forums and everyone says the SD will cut the fuel and lean it out with boost. Your truck is amazing by the way
@christianerickson44008 жыл бұрын
+willy hiebert any advice would be greatly appreciated
@wthiebert8 жыл бұрын
sorry for long wait for my reply! I'm using a megasquirtpnp
@Crabbeshack4 жыл бұрын
I will never get tired of watching this
@MrTheHillfolk5 жыл бұрын
4:30 I'll just stomp it, and see if it breaks loose. Haha like the 39 other "tests" didnt confirm that. I know man, you need to be sure so it requires alotta testing....and retesting...and tires!! Haha that things a hoot man keep rockin!!!
@mikecorleone67977 жыл бұрын
Ok this looks like it's more fun to drive than a mustang
@wthiebert7 жыл бұрын
Mike CorLeoné never had a Mustang so I don't know it is a lot of fun to drive.
@BIOHJB3 жыл бұрын
Its basically a mustang with a bed if you think about it
@nascar3fan1083 жыл бұрын
Not even close a mustang has a completely different frame same engine yes different platform smh
@wholelottamiata69763 жыл бұрын
@@nascar3fan108 mustangs handle like pickup trucks 😂
@ayeaye-yg1or2 жыл бұрын
@@wholelottamiata6976 or does this pick up truck handle like a mustang😯
@shakyjake21337 күн бұрын
I don't know if it's just the microphone on your camera, my headphones and speakers...or maybe it's just that that idle is a version of automotive perfection that's quickly becoming lost to time...beautiful beautiful sound. Thank you for posting. Instant subscriber.
@seanryan24017 жыл бұрын
gotta love that sinister sound of a turboed 302! gotta 96 GT40 Explorer I'm getting ready to boost can't wait
@bdd_dbe7 жыл бұрын
That's one way to make a 86 f150 a BADASS ride!!!! Haha I can only imagine how many people that truck surprises, nice build man, you should be proud of that thing!!!!!
@benjaminmcghan13462 жыл бұрын
That's a badass F-150 with a turbo on it I have a old 87 Ford f150 with a 5.0 boss in it with 500,000 miles on it and it runs good yet
@benjaminmcghan13462 жыл бұрын
By
@Biggchad7 жыл бұрын
Basically how I drive to Walmart..
@MowerModdin5 жыл бұрын
Basically how I work at Walmart
@bstal263 жыл бұрын
They are going to say I shouldn't, but I will. Edit: I also love how the automatic shifter is kept instead of cutting a hole in the floor. Super clean setup!
@ifronnin7 жыл бұрын
It acts like a 7.3 Powerstroke on a race tune. You just gave me an idea on how to waste a lot of money.
@wthiebert7 жыл бұрын
MtnDewAddict you got that right! we live in a world where the desires of happiness exceeds our needs, then we do stupid stuff like this.
@user-dn6qy1ou1f5 жыл бұрын
@@wthiebert I completely agree! My friend is building a turbo 2.3 ranger
@MrTheHillfolk5 жыл бұрын
@@user-dn6qy1ou1f Jesus. A turbo coupe in a pickup. A buddys dad had a turbo coupe back in the day, and he got to borrow it.... 5500 in top gear was hauling ass!! After 15 minutes of that, slowing down to 60 was so boring you wanted to get out and walk.
@DentedDiesel5 жыл бұрын
That sound hits the soul😍
@adamkarczewski77944 жыл бұрын
I'm aware this is an old post but it's the best I've read in a long time.
@metalfoxssmallenginerepair31812 жыл бұрын
When he drops it in low. You know she’s ready to party 🎉
@conradtillman66787 жыл бұрын
hella of driver sir. *hats off to you
@marioaguilar95594 жыл бұрын
Badass truck
@noscopesallowed81284 жыл бұрын
Wow what a sound! I only have one complaint with my old 300; the darn thing doesn't make any noise. You can't even hear it over the sound of the fan blowing. Maybe I need to turbo it one day and do this.
@shaegse5 жыл бұрын
The only thing more badass than this truck is that your driving it with both feet lmao
@joshwilliams69104 жыл бұрын
I bought a turbo kit for a mustang for my 85 bronco with a 351 and c6 but I’m gonna put a Holley sniper efi system on it instead of the carb before I start putting it all together.
@joeykimball57053 жыл бұрын
Sounds like what I wanna do lol how's it coming along?
@joshwilliams69102 жыл бұрын
@@joeykimball5705 I did away with that idea and just went with a Ls swap.
@zackwelch566 жыл бұрын
I got a 93 F 150 5.0 302 big block stock and a 83 F350 6.9L international harvester with bulldog 4 speed my 83 has same interior love that look
@user-dn6qy1ou1f5 жыл бұрын
302 is a small block
@joshualandojeanotte45675 жыл бұрын
Bad ass i like it I have a 1982 with a 302 with only 80000 miles one it originally
@hurricane36265 жыл бұрын
That's one badass truck 🤘
@Byrnzy3 жыл бұрын
"feels pretty good" 😂 mate that's a beast!
@TheOnlyCrackrr4 жыл бұрын
I've a 86' F150 XLT Lariat, red with a grey stripe and I've built a 302 from the 90's and dropped it in but now I want to slap a wootang war whistle on this bad boy.
@garcjr7 жыл бұрын
The cool part is it looks like it was done mostly under 5000 RPM, Bad Ass!
@wthiebert7 жыл бұрын
Jose Garcia yeah I try to keep the RPM low.
@southerndiy18 ай бұрын
Holy shiiiitttt this is wild. That sound is insane
@kts3x7386 жыл бұрын
The flutters tho 🖤 I almost jezzed my pants
@jonah.c.strickland84007 жыл бұрын
BRAVO !!! MY BLOWN 5.8 LIGHTNING DOESNT SOUND THIS GOOD !!!
@michaelmiller75077 жыл бұрын
This thing is sick man. Love that sound
@jorgeborjas65534 жыл бұрын
Todo chingón nomás la palanca que parece que valió madres la troca
@robertazure80336 жыл бұрын
Sounds beatiful
@thatblackz18505 жыл бұрын
I've got a motor out of an LX in my 93, I plan on boosting it, rn I've got a cam headers and a chip
@wthiebert Жыл бұрын
keith black high ringland pistons 9.5 to 1 tfs style valve reliefs trick flow twisted wedge heads 2.02 valve, professional products polished efi lower/upper intakes-port matched ford f-cam .512 full roller vavetrain ( rockers / lifters 60 lb injectors 75 mm throttle body adj fuel regulator 380 lph aem fuel pump mega squirt 2 pnp computer 72 mm turbo Automatic 6c 373 gears and a lot off time spent on learning how to tune, this was my first time and it works perfect Use as a daily driver and drag racing.
@salbadorruizalvarez8 жыл бұрын
Finally something to make our lazy rigs go quicker ..I've been wanting to turbo charge mine for about 6 years ..I'd like to see your build !
@wthiebert8 жыл бұрын
Salbador Ruiz check out my other videos let me know if you have any questions.
@tyb407 жыл бұрын
willy hiebert
@samuelaular8836 жыл бұрын
your truck its amazing, i love boost on 302
@wthiebert6 жыл бұрын
Samuel Aular thanks, fun to drive....
@thommygun999 Жыл бұрын
can't wait to put one on mine
@mjamesplays6 жыл бұрын
Needs a 5spd swap!
@annam5014 жыл бұрын
Great build
@perryrivenburgh73975 жыл бұрын
Step on itttttty love in it
@TylerDuysen3 жыл бұрын
i got an 89 f150 4x4 5.0(been bored .30 over has upgraded pistons rods etc i plan on on supercharging it and doing my own intake here soon
@TylerDuysen3 жыл бұрын
mines got a t10 4speed and 4:10 gears with lockers not really building mine for speed its a mud/trail rig
@MRHUBQc7 жыл бұрын
ok this is way too cool! nice truck man!
@codyradler43018 жыл бұрын
That truck is bad ass good job
@wthiebert8 жыл бұрын
Cody Radler thanks man.
@johnreed98647 жыл бұрын
and sick truck man i love it
@wthiebert7 жыл бұрын
John Reed thanks.
@matthewgriffith20785 жыл бұрын
Decent! But let’s talk about that cool shift knob. What is that and how do I get one??? That looks like a lot of fun! Thank you for sharing.
@prosource796 жыл бұрын
WOW nice!😱👏👏👏
@briannagomez39574 жыл бұрын
Badass
@mustangmadd31724 жыл бұрын
Thats nice :)
@redetroitwing7 жыл бұрын
AWESOME looks like it's done right by the way it runs! I just swapped a351W in my 80 Bronco and this or belt driven supercharger like vortec or pro charger, are those Mustang manifolds for the turbo mount?
@matthewcolson76673 жыл бұрын
You just told me to waste the next years worth of paychecks i get into my truck I’ve got a 95 f-150 xlt with a 5.0 in it lol
@WARD5KUSTOMZ10 күн бұрын
DAAAAAAMN
@MowerModdin5 жыл бұрын
I was already eyeing up a few 5.0s from the junkyard cladded out with GT40 parts...this makes me want to dump more money away
@noahgaray79236 жыл бұрын
Slaps on a turbo and doesn’t even get an alignment. Of course
@wthiebert6 жыл бұрын
Noah Garay don't really need it anymore, I got steering in the back now, well sort of 🤔
@Michaelwelb4185 жыл бұрын
Not much aligning to be done on a twin ibeam anyways
@chrish50963 жыл бұрын
Noah Garay since when does an alignment make a truck fun to drive?😂
@perryrivenburgh73975 жыл бұрын
Prettttty good dammmmm gina
@styga19695 жыл бұрын
Sounds and runs great. Time to do this to me 93 flareside... What turbo set up are you using. Also have a 2000 explorer i may play with also.
@caroyomilkleche99717 жыл бұрын
beautiful
@carsncabins13497 жыл бұрын
DAAAAAAAAAMN!!! Hells yeah man!
@fat_cat84574 жыл бұрын
Is this the stock 302? because I have the exact same truck and engine but in a light blue paint :) is there any way you could get me a link to the turbo you used?
@TOM.RANGER7 жыл бұрын
thats sounds f@#king awesome dude
@100MPHCHASES5 жыл бұрын
My son and I are building a 1994 5.0 reg cab shortbed xlt we went with a 66mm turbo kit we fab most of it ourselves it should be done in a month
@wthiebert5 жыл бұрын
Nice project,I am interested to see it!
@austinpetemo4 жыл бұрын
Did you beef up the auto trans any? That sound is siiick.
@wthiebert3 жыл бұрын
A little bit, stage 2 kit
@devenbo81287 жыл бұрын
This is hilarious and so bad ass
@TRX450RVlogger7 жыл бұрын
Oh man!!! I wanna do this someday with my 1990 Bronco! What Transmission are you running an AOD or Just a C6?
@wthiebert7 жыл бұрын
Just a c6.
@Thecowboy699977 жыл бұрын
TRX VLOGGER you'd probably have to have a c6 to withstand the extra torque and power.
@mkylnthny7 жыл бұрын
lol "just" a C6
@pedroespinoza81607 жыл бұрын
Awesome!
@perryrivenburgh73975 жыл бұрын
Helllllll fucking yeaaaaasss
@sher0desrtuction5352 жыл бұрын
Hey getting to do just that exactly any pointer help can pay
@domopockv86484 жыл бұрын
can you broke your transmition doing that ? nice truck man
@BraydenSB3 жыл бұрын
C6 are made to withstand quite a bit of power.
@Boaters_hub6 жыл бұрын
Wow man that's impressive. Sounds better than them ricers. Holy shit tho 6psi and breaks loose no problem!
@rosensteelgarage13073 жыл бұрын
Where did you mount your intercooler?
@wthiebert3 жыл бұрын
Hi there, right I. Front of the rad,
@tonyincs5 жыл бұрын
Looking to twin turbo my 88 150 4x4. Looks like you have a steering issue. Is it related to torque steer or did you just not replace the steering/torsion/suspension components at this point? Great vid. Thanks for that!
@wthiebert5 жыл бұрын
Thanks, I need to pull off the steering wheel and put it on straight.
@perryrivenburgh73975 жыл бұрын
Godddddammmm I can’t wait
@NikkHorse-kx7yi8 ай бұрын
I have a 86 f150 5.0 that im going to turbo i would love to see what and how to save me from some headaches mainly want to know the exhaust side pipes in or welded a flange hmm
@adanreyes77907 жыл бұрын
holy crap dude. I want to do this to my 92 f150 it has the 302 5.0 v8, im looking to buy a universal turbo kit from amazon, but was wondering where you got your stuff from? the kits on amazon are universal, they dont come with a manifold but im going to end up making my own. what would you suggest i do? how much did your set up cost you?
@022367986 жыл бұрын
Adan Reyes yo buddy, end up doing your truck?
@lumpyzx26453 жыл бұрын
If you're gonna cheap out at least use an eBay turbo and not Amazon, but for cheap you'd be better off getting a decent used turbo from a 7.3 powerstroke for like 100 bucks, Amazon turbo will turn your block into Swiss cheese, and don't cheap out on the wastegate or blowoff valve
@BroncoBillyGarage7 жыл бұрын
damn i love ur truck man, i have an 84 f150 im working on modding it idk if im gonna do turbos though cause idk how to do all that turbo and boost guru work
@javiermuniz16732 жыл бұрын
I want to build my F150 5.0 too and I want to ask you what transmission did you use your stock one or a big one from where or you did it yourself
@craigoliveira77275 жыл бұрын
How much did this setup run you? I have a 96 f150 with a 5.0 jasper crate motor in it with 50k mi. im trying too turbo it while spending as little money as possible whilst not cutting corners as far as reliability goes, I dont wanna be blowing rods out of my oil pan.
@craigoliveira77275 жыл бұрын
Not talking about the fuel system obviously mine would be different but as far as the internal upgrades and the turbo kit itself, I see below you said you had too make custom headers too
@wthiebert5 жыл бұрын
Hey Craig, it's been a while since I did all this, I spent about 5k to 6k on the turbo setup including fuel, ECU, I did all work myself wish same alot, the truck still runs very good but I do keep RPM and boost low for the street, Yes I did build my own headers I couldn't find a kit for my truck at the time, but turbos are so popular these days it wouldn't surprise me if there is a kit available for these trucks, the 96 is pretty much the same.
@vincepalubiski4706 жыл бұрын
I'm planning on twins for a 460 in my '86....
@annam5013 жыл бұрын
Same here
@NoHandleNameScrewTube3 жыл бұрын
This is what I wanna do with my 67 f100. Only 6 lbs. what the heck wow.
@MainelyCannabis5 жыл бұрын
Is this twin turbo? Or what size turbo/what car did it come from? did you need bigger fuel lines/fuel pump/injectors? Is your truck EFI? Love the truck man! Cheers!
@wthiebert5 жыл бұрын
Thanks, 1986 f150 short bed 302. keith black high ringland pistons 9.5 to 1 tfs style valve reliefs -trick flow twisted wedge heads 2.02 valve, -professional products polished efi lower upper intakes--port matched -f 303cam -full roller vavetrain ( rockers / lifters balanced / blueprinted 60 lb injectors -75 mm throttle body -adj fuel regulator upgraded fuel lines -380 lph aem fuel pump mega squirt 2 pnp computer 72 mm turboneticts single turbo 3 inch air to air intercooler Automatic 6c 373 gears
@JohnnyAnderson18 жыл бұрын
I got a 1982 Im wanting to turbo the stock 302 with a blow through, its a reman engine but im sure it has some cheap cast pistons in it... What turbo headers are you using?
@quisetilly59636 жыл бұрын
Quick question can I buy an on3 Foxbody kit and get an Foxbody upper and lower intake and throttle body and put it on??? I really want to be boosted
@wthiebert6 жыл бұрын
Marquise Tillmon I assume you're talking about the same truck as mine! The on3 kit would have to be modified to make it fit, and if you can weld, it's not that hard to do.
@hayzeproductions70937 жыл бұрын
sounds more like 30 pounds of boost to me. haha
@wthiebert7 жыл бұрын
Fab Social haha yeah I wish!!
@hayzeproductions70937 жыл бұрын
willy hiebert after taxes im leaning towards fabricating an intake manifold and getting a turbo for my jeep. it also has an i6. but its a 4.0l idk what your size motor is. from the looks and my plans on the 2 projects, should be pretty easy. but for starters thr max psi that I could own would be 8 pounds before it starts to run too lean. that would be a whole nother line of work.
@wthiebert7 жыл бұрын
Fab Social I would start with low boost 5lbs then go to 8lbs, my motor is a 5.0l .
@hayzeproductions70937 жыл бұрын
Thanks for the tip on it! by the way i think you scared the crap out of the small ford hatchback car on 4:38 into the video. haha
@user-dn6qy1ou1f5 жыл бұрын
My 7.3 powerstroke makes 33 pounds. It sounds damn near identical lol
@jeremyl89896 жыл бұрын
Nice I got something similar 97 tho
@2cool4spool165 жыл бұрын
Holy FUCK this things rowdy!!! I’m gonna end up ruining the 87 f150 I just bought with 128k on it cause of you 😂 engine is smooth as a sowing machine so maybe it’ll be a good candidate for boost
@ericmel09302 жыл бұрын
Awesome truck man! If I may ask what do you have in it? I have a 1991 f150 efi 4wd 5.0.
@DallasCowboysTalkDCT Жыл бұрын
Where you get the setup? I’m doing a full rebuild of a 96 and was jus tryin to find what would work best
@jadezeidler17973 ай бұрын
What exact turbo kit is this ? I have questions as im building a 351w for my 96. Ported and bigger valves i the gt40 heads, 30 over but stock pistons and bottom end.
@shark111754 жыл бұрын
That is badass man, pulls hard can we get fuel/ecu specs
@jonathanduncan96843 жыл бұрын
How much hp I have a 1993 Ford F-150 5.0 and would like to make 400 to 450 hp
@wthiebert3 жыл бұрын
Depending on your set up, on 10 you should easily reach your goal.
@domesticdisturbance52738 жыл бұрын
Awesome video man! Did you do anything internally?
I’m a little late for this video but nice job man sound like it runs like a champ but what turbo and boost you running because I have a 69 bronco 302 and I’m going to turbo it and 14psi seems safe because it would only double stock hp and that would be at 550hp but people run 10psi even tho anything under 600hp won’t make the block crack in half
@tsiyyon56015 жыл бұрын
How much would it cost for me to do this?
@wthiebert5 жыл бұрын
Hard to say, 5 to 6k
@HeintzBoyGarage7 жыл бұрын
Is this a ball bearing turbo? I need that sound on my 302 drift truck lol
@wthiebert7 жыл бұрын
Heintz Boy Garage yes it's a ball bearing.
@dylanarbaugh61165 жыл бұрын
What size turbo is that
@perryrivenburgh73975 жыл бұрын
I have a 63 351 I’m gona turbo fuck yea baby tear it up
@saviwayne12054 жыл бұрын
I would really love to know the build on this. I have a 94 that has MAF and I'm looking to do the same thing with it
@benweber86232 жыл бұрын
Nice sounding, what manifolds did you use for the build?
@2012mchammer6 жыл бұрын
I was hoping it was a 3 on the tree but I guess the c6 isn't bad.
@travischooter4 жыл бұрын
Lmfao. She dont sound have bad. Have fun stay safe