Custom Ford F-150 Sleeper Truck Review: Bill has never seen anything like this...

Want installs, giveaways and more exciting automotive videos? Subscribe now and you'll never miss out:
kzbin.info_c...
Bill has driven a lot of vehicles, but he's never been behind the wheel of anything quite like this custom 1988 Ford F-150...
What's the craziest builds you've seen? Just post in the comments below, we look forward to hearing from you!
Check out F-150 parts from CJ's here:
www.cjponyparts.com/ford-f150...
Music Provided By:
www.epidemicsound.com/

[@cjponyparts]

Subscribe to CJ Pony Parts so you never miss out on our giveaways and the latest options for your vehicle: kzbin.info Want to mod your own truck? Check out CJ's selection of F-150 parts here: www.cjponyparts.com/ford-f150-parts/c/4098/?.com&

[@williamrheawe958]

where can i get that rick sticker

[@thefiascogarage3215]

Love somewhat ratty builds like this. I bought a clutch off of you guys for my '97 Cobra back in early 2011 and you had a Shelby drag car with bullet holes sitting in the showroom. I always wondered what ever happened with that car and what was the backstory? It looked like it was pulled out of a field and you guys were really busy at the time, so I didn't get a chance to ask.

[@carterlyons4026]

CJ Pony Parts please don’t put the impact sounds nobody cares if u cuss

[@bayouninja]

With 4-5 hundred hp you drove that thing like Mrs. Daisy was your passenger

[@devinfladung8965]

If you're going to test drive a twin turbo vehicle, then drive it. A little cruise down the road is not entertaining or informative.

[@colescarstuff7102]

Finally a proper sleeper. No loud exhaust or bigass tires.

[@cjponyparts]

Yup! Thanks for watching, make sure you subscribe!

[@86hyperstang]

Thank you

[@Legend-lc9bv]

@@86hyperstang why not tune it and fix that got dang shifter nob lol

[@86hyperstang]

@@Legend-lc9bv changing engine setup and trans

[@Legend-lc9bv]

@@86hyperstang try to dyno tune it

[@virginiaman1304]

makes me want one, that old truck takes me back to my high school days, bench seats, stick. Sitting in the middle was a ball buster

[@jefferylemase6090]

I have an 89 f350 crew cab dually with the original 460 and trans in it only thing I've had to replace is the alternator at 300,000 it has 481,450 miles on it hasn't had a tune up in 10 years, still keeps trucking it's our work horse and we love it

[@gracia141ify]

sir positive post if you loved it you would at least give it a tune up

[@ricochetey]

@@gracia141ify if it runs good what for dont fix it if it aint broke

[@JellyDoesZombies]

Just because it’s running doesn’t mean it’s running good lol

[@texasismyhome5710]

I got a 2004 2500 Chevy it's my work horse I always say you treat her right she'll treat you even better. I don't mind spending money on her I have my own tree trimming, junk hauling, privacy fence, furniture moving, material hauling, and other services business she will bring me thousands on thousands eventually millions with only 170,000 I seen a truck like mine with the 6.0 V8 vortec same engine with 390,000 and still kicking strong!!!

[@JellyDoesZombies]

Texas is My Home I have a 2004 8.1 3500 single rear wheel with 240k miles runs great, but my 89 d250 cummins runs hell of a lot better

[@jackiejtheg]

Man just watching you drive this old Ford makes me realize I want another one. I've had about 6 or 7 old fords and I think it's time for another one

[@86hyperstang]

I 💯 agree

[@brandonruhl4525]

Thank god. a ford engine in a ford. i was waiting for the “ Ls SwAp “

[@suavehouse5150]

Brandon Ruhl Keep that shitty ford engine in it

[@nonyabusiness3200]

Yep no Loser Swap

[@greenwaytruckinginc6134]

@@suavehouse5150 what do you have? Calling somebody's engine "shi++y"? Y'all KZbin cats are funny.

[@shawnmiller9381]

LS = Lazy Shit lol

[@RobertDickens2002]

I could be wrong but don't think cjs would do that to us

[@dLikesDDs]

dont need a tach, just listen to the pitch of the p/s whine.

[@criscooper3760]

“I don’t feel safe but this is a lot of fun!” That’s what life is about. I got a 95 and I hope to get it to that level of disarray!

[@FrigginCroutons]

This makes me miss my old truck. I had a '89 single cab short bed with a 5.0 and an AOD. It wasn't fast and leaked a little oil, but it was a great truck. Shouldn't have sold it.

[@supersnot4]

I have an '89 single cab long bed F-250 with 5.0 and AOD. It has at least 250K, maybe 350K or 450K miles on it. I've personally seen the ODO roll over twice in 10 years. I daily it, tow with it, haul a Lance camper with it, you name it. And it still passes smog in CA. You shouldn't have sold yours, I'll definitely never sell mine.

[@jamesharvey286]

Heck yea! I got a 87 single cab, short hed. 5.0 with a true 4 speed. No overdrive. Slow as a slug but reliable as hell!

[@ClawRyder]

I have a 89 single cab long bed with the 4.9l and the 5 speed Mazda tranny. Same color in and out like the video. Love it and it's strong still

[@danielfrederick306]

ClawRyder my old man has a 89 bronco 5.0 AOD with at least 170k maybe 270, or 370k miles on it, he then bought me a 05 Jeep and all my friends think the jeep is cooler, I still know what I want and it’s either an old pickup or that old bronco and he’s fine with that

[@jakeedgell591]

Got my hands on a '91 with the 5.0 and the mazda stick shift transmission. It's got a 4.10 final drive and factory limited slip rear end. With some fresh bilstein shocks and a set of 31x10.50 all terrain tires on it now, it'll crawl anywhere up in the mountains. I fully plan to keep this truck forever.

[@Beandiptheredneck]

That 5 speed is NOT going to handle the power that truck makes. It’s sweet, totally my style, ratty old truck with a bunch of broken stuff that goes really fast

[@muliechaser1618]

How do you know? Could be a built t5 for all you know ....

[@cjponyparts]

correct after the 2nd video of the truck the trans died in it

[@My45ToYourThroat]

The EFI badge on the front is false advertisement lol

[@Zerogivengarage]

My45ToYourThroat lol. He actually had a FiTech system on it for awhile but likes the carb better

[@dannymartin6193]

Its a sleeper

[@UFOGHOSTHUNTER]

adds 5hp

[@killawhale8726]

Well it technically has electronic fuel injection

[@reaperasylum2163]

@@killawhale8726 ain't nothin on that say efi that bish screamin carb

[@genesmith9238]

I cant hear you the fuel pump is to loud

[@AB-80X]

Sounds like that fuel pump will boil half a tank of gas in 20 minutes.

[@isaachousley325]

That aint the fuel pump, thats the hvac fan lol.

[@NeilLB7]

Guess you've never rode in the bed of a 87-91 F150 with a camper shell. Cause the OEM fuel pump is NOT quiet.

[@Beandiptheredneck]

The fuel pumps on all these trucks are loud. I don’t know why they just are

[@Beandiptheredneck]

Jeremy Bowers not really that I’m aware of but I think the mustangs had a different firing order.. I could be wrong on that. It’s now hard to pull the engine out. I just pulled one out of a 96 recently. Just dont waste your time, and pull the front clip off. The only real issue I can think of is body control computers and the high pressure fuel pump versus the old in tank pick up/mechanical pump

[@AVGJoesGarage]

I love it. So unsuspecting. Makes me want to buy up an old Ford truck and do some magic in the drive line.

[@TheChiefJudgeDredd]

I'd outrun it, "Opens hood" Nevermind

[@AB-80X]

While it's fun and it's a sleeper, fact is that this truck is probably not that fast.

[@Rook_Layne_Reno]

ABOlsen69X that’s what they say about some sleeper civics, but then they make Lamborghini’s look slower than a ricer

[@jeffambrosia5678]

@@AB-80X ,not that fast?it's a fucking thirty year old work truck.

[@AB-80X]

@@jeffambrosia5678 Wrong angle. It started life as a such, but it is far from what it is now. It's a hotrod.

[@luckypotato6973]

450HP? 2 turbos and thats all its cranking out. $ wasted. My Stock dodge is 395hp with no turbo lol

[@stevehall6539]

Bar none this is the best CJ's video ever , I know we all love our Mustang , I have a couple myself , but this was a really great video , amazing job as always Bill

[@Wowzers2006]

The sound quality is really good on this video. One half reminds me of riding in a friends Supra; the other half reminds me of riding in my dad's old truck.

[@52stevedo4]

Those old fords have vertical splines to hold the shift knob on . After a few years it started coming off . I poured a whole tube of super glue in the knob . Now it only comes off when I want it to .

[@zemmy1985]

I cut the splines off mine and grounded the stick down to a smaller diameter to thread it out with a die and screw in a Hurst shifter

[@jeremiahanderson7803]

Sick truck that needs to be the next project for the channel

[@forterierocks]

I had an 81 square body Chevy with a 350/350 one 76mm Ebay turbo and it was such a fun truck, I regret selling it everyday but had a kid and needed a family vehicle. 2001 4.3L Jimmy life for now lol

[@mattbundy4900]

The custom badge is correct....anyone laughing saying oh pos hey make a better truck. Hats off to the man who made it gotta a lot to learn but all the best. Your heart and ideas will make a beast

[@86hyperstang]

Thank you very much @matt Bundy this truck is awesome

[@juliansilva2442]

Homemade Lightning, pretty awesome! I help my dad overhaul & now maintain his 85 F150 XLT Lariat single cab with a long bed that was originally my grandads, I'm surprised that the cruise control still works.

[@Catboy.]

Back when a truck was a truck

[@signlsirchir2156]

1st one this guy drove? seems like he didn't know to start out in 2nd.

[@ford300rippergarage]

@@signlsirchir2156 the transmissions in 87-96 f150s had very high gearing. You have to start in first. A 250 or 350 had HD granny low transmissions

[@signlsirchir2156]

3.90 to 1, while it's no 5.72 to 1 of the Zee F 5 you can hear How fast it winds up, Any time I wanted mine to move out of its own way I grabbed second and gave more throttle.

[@ford300rippergarage]

@@signlsirchir2156 I bought a truck with 3.08s and 31 inch tires, can barley get it to move from a stop.

[@signlsirchir2156]

Maybe you left the parking brake on?

[@americansmark]

In the future, mount your phone on the dash and open the Waze app. It shows your real time speed, even if you don’t have a route going.

[@F150fx2sporT]

Praise Kek that or just a Speedo app

[@tprldaryl2161]

And police location

[@FdtTmOJHKPXQFMMkhIE]

my old phone is the speedometer in my Ranger. There are GPS speed apps so you don't need waze, or an internet connection.

[@patrickhadden324]

And the Po Po 😃😅

[@iSwagzable]

EJECTO SEATO CUZ

[@gomerpyle2301]

i love this button

[@joshua4620]

Cuh*

[@vasquez3769]

@@joshua4620 Its cuz not cuh.

[@soppingwetburgers6493]

@@joshua4620 Both Cuh and cuz are acceptable and said in the movie. Tyrese says cuz in the scene,but if you have shitty audio you'll hear cuh.

[@angry3055]

I do not usually like too work on trucks as projects, but the video has been a good inspiration👍

[@zach7459]

Who else seen the intercooler before 1 minute in lol.

[@reaperasylum2163]

Sneaky little fucker

[@FXFBS540]

Awesome build. Love that body style. Defiently one of the toughest trucks Ford built.

[@cjponyparts]

Yes indeed! Please subscribe and check out some of our other videos :)

[@brent440]

read up on 1980 ford frame, they were an exception

[@rogermcnutt5057]

Love to see more stuff like this. Not every body has money for the great stuff

[@chargermaster586]

My dad has one of those 88 F150s he has had in the garage since 1991 but uses his 1992 F150.

[@demondrespratley6497]

Last generation of the steel body f series pickup she is most definitely solid

[@dickysgarage7120]

Love this build. Kudos for doing it yourself and your way!

[@86hyperstang]

Thank you

[@johnblegen1150]

I smashed the like button before a minute in and screamed HELL YEAH now I'll watch the rest of the video

[@cjponyparts]

Haha hell yeah! Please subscribe and check out some of our other videos :)

[@xXBoo56Xx]

Dammit. I was going to build the first sleeper bricknose but you guys beat me to it. Congratulations!

[@86hyperstang]

Lol thank you

[@davidkucher5.0Coy]

Hi Bill! You look like you were having to much fun. Keep up the good work.

[@christopherparamdeo815]

Man you can't beat a square body Ford.. doesn't matter where what when how these things run I got my old 97 7.3 and today I pulled out an 18 wheeler with it at work (reason cause he had our duct work on the back [HVAC guy]) Keep a look out for how many of these things you see driving a day next time you go out

[@jeronunkoffunk9437]

Cool, truck I like the whole concept and its quiet. Definitely raw build

[@steffinmezger5301]

I have 93 f150 2wd extended cab ...it had a 302 originally with a massive 5 speed auto ...now it has a 351 windsor that came out of a boat... I added a mild cam , edelbrock intake and edelbrock 650 carb .... Its hooked up to a c4 trans... the truck exhaust wise is running stainless tri y headers and glasspacks ...the truck runs ok im guessing it has around 300 hp...fun to drive and a cool daily driver

[@dylanrice6707]

Heck yes bricknose ford 😍 and I have the same year f150 but short bed 4wd inline 6

[@oldmillennial6872]

Turbo that inline 6. You can't kill it anyway🤘🤘🤘

[@dylanrice6707]

I am. Fully built as I can get, stand alone efi and 76mm turbo. Truck is being built for mud and street driving. Getting 22 inches of lift and 48 in tall tires

[@Trebuer22]

@@dylanrice6707 thats a joke right?

[@gabebarnett3529]

I think bullnose looks better the

[@dylanrice6707]

Trebuer22 nope it's not a joke it will be getting 22 inches of lift and 48s. Starting off with 10in lift and 40s after college then getting the 22in lift and 48s when the 40s get boring

[@SurlyMechanicTX]

"No special instructions" LOL, my old sleeper had a checklist on the visor. LOL

[@ryansolarguy3424]

Cool, I’m a tree guy who desperately needed a truck for the recent storms here in Illinois. I was reluctantly putting my 90 d350 Cummins back together earlier than I wanted to when I realized that the replacement 14cm hot side I had bought over a month ago was a 16. So I pushed off that project and today bought a extremely clean patina’d Blue (faded to baby blue) 86 302 4 speed f250 4x4 w 10.25 rear and steel flatbed. The long block was swapped out 4K miles ago. Original owner 89,000 miles from Montana. Dumped some Au at the pawn and scooped for $3700 and I will be installing twins to assist with towing the goose neck dump trailer.

[@Apethgrader]

I like that truck. Reminds me of an 82 f150 i had. I have a 99 5.0 explorer 2wd now and It's surprisingly quick and a great sleeper cuz nobody sees it coming from a plain white explorer.

[@thegreatkodateme7424]

"Ejecto-seato cuz!" Lol wasnt expecting that and I died

[@waynehardy6186]

I have the same truck but mine is a 91 XLT with a 351 w and a C6 transmission, love my truck.

[@jeremiahhenderson5569]

Wayne Hardy i got a 91 straight 6 5 speed. 4x4 same color. Its a blast to drive.

[@ricochetey]

Ive got a 91 shortbed I6 black no rust it is a 2wheeler

[@1982MCI]

Wayne Hardy well I’ve got a 94 with a 351 and she’s not feeling real happy at the moment. I just bought her last month and if you step on the gas too hard she falls flat on her nose and is running super rich. I drove her about 18 miles last week in one trip and she used a quarter tank of gas, ouch!!!!!

[@johnjs1509]

ive got a 2wd 91 xlt with 302 ...no rust 95,000 miles

[@John3_16Q]

Did u do a c6 swap instead of the e4od? Or did u put a carburetor engine as well

[@mountainbikelife2526]

My uncle had a 84 Ford pickup truck with a six cylinder automatic transmission I used to drive it in the hayfield loading square bales when I was 11 years old red exterior red interior. That is a awesome build very quiet running and nicely put together under the hood

[@cjponyparts]

Thats awesome! Thanks for watching make sure you subscribe!

[@707king]

This is awesome. I just got an 85 F250 and I love the damn thing. 92k miles on her. Love driving it.

[@86hyperstang]

awesome dude are you going to do anything to your engine

[@707king]

Brendan Dougherty no probably not to be honest. I’m a simplistic guy I just love having a badass truck as it was intended. The straight 6 in her will run for a while I hear haha

[@86hyperstang]

@@707king well I do have the 302 twin turbo engine for sale

[@jakefuller79]

Love the older body style trucks....I have a 97 7.3 f250 I love it!

[@davoid96]

jims garage same, it looks way better than the ugly 98 redesign

[@DUNEATV]

That truck is awesome

[@pinky1933]

Miss my 88. I had a straight 6 in it 5 speed. Top speed was a shaky 75 mph but holy shit it would bolt off the line and beat a lot of cars in a 100 foot race lol after that it was toast. With the doors closed, a soda on the passenger floor may, or may not fall under the door and out of the truck due to rust holes. Lost a few floor mats that way. The liner on the ceiling was missing and my daughter learned the hard way not to wipe it with fingers and let it fall into eyes. Cried for like an hour. Never looked up while driving after that. Dual gas tank, but don't know what was sloshing in the front so only had rear use. Good times. Now have a 2016 and hate the payments, love the upgrade.

[@roadwarrior1450]

I love it when people think outside the box, or in this case outside the bed lol. Nice ride👍👍👍

[@cjponyparts]

We do too! Thank you!

[@NoizTheDj]

Great video! Keep these coming:)

[@chrisdavis21915]

i love it id totally rock that thing

[@waytostoned]

94 f150xl with a 351w here... Absolutely love it!

[@cjponyparts]

Awesome thanks for watching! Make sure you subscribe!

[@mikepoint4983]

I like the fact it’s a long bed and it was made from spare parts . Great vid

[@JeremyAirLift]

Great video Bill!

[@yaboykris2118]

I love this truck. I’m trying to get my dad’s old 93 F150 that I grew up in so I can turn it into something like this.

[@conquerorhowie]

That thing is sweeeet! I ❤ it. Wish i could do that to my '88 150.

[@jamesguidry3995]

I have a 1991 F-150 XLT Lariat extended cab short bed with a fuel injected 5.0 that has well over 500,000 miles on it . Engine has never been out of the truck , the auto overdrive was replaced at 200,00 miles . Has never smoked & uses no oil to speak of due to the factory installed forged pistons . Shorty headers with true duals and Cherry Bomb glass pacs , an MSD ignition . I must admit , I beat on this ole truck every time someone challenges me . Fords little 302 5.0 is a MARVELOUS ENGINE !!

[@ozarkoutlaw7593]

Gotta love classic Ford's built ford tough

[@cjponyparts]

Yessss. Please subscribe and check out some of our other videos :)

[@4literfandaniel373]

That is freaking sweet! I hate the syncros on those older five speeds though😕.

[@nedaCFilms]

Back in the ‘90s there were a few 5.0 engines that had ported and polished E7 heads with bigger valves that made 300hp to the wheels. You can make E7 heads flow.

[@TheEhlek23]

I'm right down the road from you guys, I'mma have to keep an eye out for this thing.

[@86hyperstang]

lol

[@therobb5738]

Used to have a 95 f150, 302, 4x4, 4 speed auto w/ OD, and I drove it to death. Not an easy feat, but neither is surviving being a teens first vehicle. Now have an 85 F150, 300 I6, 3 speed auto, 2wd, fire engine red and build like a tank, and (with enough weight in the rear) would pull one, too. Love these old trucks.

[@cjponyparts]

They are great trucks! Thanks for watching, please subscribe :)

[@brianrocco4301]

Awesome build!!

[@86hyperstang]

Thank you

[@mattkrumal239]

I love that the only visual cues to this being anything other than a crappy beater is the wide rear tires. Amazingly quiet too!

[@TheFogLakeshore]

Thank you for showing an actual sleeper. That PN with the Grenada qualifies too, and both are 8.2 Windsor builds. This one on iron heads, that's crazy really. On a carb. With no tach. Great sleeper.

[@Robert8455]

I like these kind of vids and build your own affordable hot sleeper hot rods - especially trucks. I'd probably fix those little things like gauges and shift knob... and oh yeah what was with that grinding noise...? At first I thought that was some kind of special effect but maybe not. LOL

[@cjponyparts]

Stock trans not meant for anything like this lol

[@SuperCJification]

Sound effect sounds like an air impact wrench

[@rileydaniell4554]

Syncronizer

[@briancollins1757]

Robert DeMilo I'm working on my next sleeper. A Volkswagen "Thing " Complete with an old school 426 Hemi and possibly a nitros system and of course a weiand 6-71 blower 😜😜😜

[@Brycereigle2000]

Love the damn thing the bricknose fords are my favorite never seen one like this lol good job on it

[@86hyperstang]

Thank you so much

[@loganboyer8816]

Love the overspray on the tires from the rattle canned wheels.

[@86hyperstang]

Tires are not painted rims were purchased brand new powder coated black

[@ezeqkro]

I have a F 150 as well 94' 5 speed inline6 with only about 128k miles, truck is a beast

[@hectorburquez4560]

I got a 92 f150 5.8 that shit books it

[@hollymack1008]

That truck would be sick all done up the right way

[@86hyperstang]

Holly it is done the right way FUN . It's just simple truck that I enjoy having fun with.

[@bearium91]

Can confirm after having a '91 Flareside that if you can keep a shifter knob on, you've probably sold you soul to the Devil or something like that... 😂

[@looniethemoonie5353]

My dad had a 89 xlt when i was a kid. It was grey with blue 2 tone, single cab, long bed, and had a camper shell that matched the 2 tone. I loved it but my parents traded it in in late 99 for a (then new) gmc sierra. Nowadays he has a 2010 f250 that he calls his "retirement truck" lol.

[@superduty4556]

The fact it's using an M5OD is the most incredible aspect.

[@86hyperstang]

It drives great with it

[@ford300rippergarage]

It will blow Its guts out soon enough. Then C6 swap and no worries. M5 was only good for i6 and stock 302 and even then you could break them with abuse.

[@austinnipper6460]

All I can say is if it makes you smile and want to drive it, that's what matters. Nobody has to drive it but you, so screw any haters! It's no gt500 or suby WRX or Godzilla, but you can thrash it, and not worry about it.

[@86hyperstang]

Exactly I love my truck

[@mlane1986]

I had a pickup that looked just like that. It was a shit box but always got me where I was going.

[@elmostong1865]

BadAss build! The fact that its a stick is even better!!

[@reclaimer429fishing]

Always wanted to build and older F150 like that. Been my dream for a long time!! I love it!!!

[@cjponyparts]

Thanks!

[@marco5ohh525]

Now this is sickkkkk

[@Dr.Westside]

This reminds me of my 03 Silverado . Straight up looks like Grandpa's truck but with a 76 mm turbo .

[@bestusernameevahhh5802]

Makes me miss my 85, It was flat black, wide black wheels, side outlet glass pack exhaust. It wasnt pretty but was tough as nails. We were coming down the highway with that EFI 5.0 wound tight, the speedo stopped at 85, but managed to bury it all the way back down to the D on the dash. 😂 still no clue how fast we were going, but it wasnt a smart move in a truck that old.

[@colincraig5575]

I've had my 85 f250 with 460 so fast I stripped the speedo gears 😂

[@jackperry9369]

Love stuff like this shows anyone can do it if they want to with what they have

[@rednecksdoitthebestyeeyeey209]

A 1994 f150 with a 300/6 was my first truck I'm a ford truck man

[@ImDirtyDan73]

I have a 95 same color lol

[@jammbigoat9393]

Mango wishes I got a S10 and it still runs

[@stevenderonge8511]

That's cool man, I still have my 1992 f150 300/6 with 220k miles and runs great. No drive-train problems ever.

[@MilesPrower69420]

your cuss word sensor is so damn annoying that i coulnt enjoy this vid, kinda bs too cause its 200% louder then anything elce

[@CJColvin]

Man this is one badass sleeper.

[@abbeynormal252]

I own a 88 f150 4x4 short bed. I have been on the fence about selling it. Came with no motor I put in a carbed 302 but never plumbed it. I do have a efi 351 and a 300 inline six that sets in a 82 bronco with a four speed (it beat up and rusted all to hell). Maybe one day I'll get off my ass and get it running.

[@Pikertime]

I would have liked the video a lot better, if you wouldn’t have ragged on his truck the whole time.

[@86hyperstang]

He didn't rag on my truck that much just being honest and having fun with the truck

[@86hyperstang]

He really didn't rag on my truck he's just being honest and just having fun with the truck

[@soppingwetburgers6493]

@@86hyperstang Nice truck bro.

[@86hyperstang]

@@soppingwetburgers6493 thank you

[@cjponyparts]

We are good friends and Brendan knows I love his truck.

[@jnhnauo6212]

got to love ford

[@BOSSArcticCat]

Even sounds like an "old man" truck haha. It would take anybody by surprise.

[@SGTredman545]

I put some loctite/thread sealant on my “spline” shift knob (97 ranger) and it has been flawless the past 5+ years.

[@jarheadss9253]

I love when they really do look like sleepers :)

[@86hyperstang]

It's perfect lol

[@jarheadss9253]

@@86hyperstang it is perfect 🔥

[@davoid96]

It’s pretty in its own way

[@hunterowens7247]

I had a 1994 f150, shift knob came off all the time on that one too.

[@chandlerrobinson2452]

love it I own a 91 f150 doing a restomod to her one of my fav old fords

[@chandlerrobinson2452]

Well its the new year plans to have my truck on the road in the spring. When you have a family it takes time to fix old trucks. i named mine after one of my dads favorite songs and it soot's the truck " One piece at a time " by Johnny Cash

[@roninkraut6873]

I have a soft spot for those old ‘bug eye’ Fords

[@vineryoulks7774]

That fuel pump should have just been attached rite 2 the imputshaft of the trans sounds more powerful then the 306

[@dipstiksubaru3246]

A fuel pump mounted on the input shaft of the trans....?

[@psalmonefortysixdottwo9512]

Engine sounded real nice.

[@cjponyparts]

It runs good!

[@PreacherDan]

This is the kinda stuff I LOVE!!!!

[@ragintaurusmusclemercury7023]

I love how you look down to the gauges but none work. Reminds me of my old '70 El Camino with a 455 olds big block with 4 speed I used to have back in the 90s. Should have never sold it. 😒

[@tinyman520]

Hey Brendon I just picked up a 91 with the 302. I want to do something similar. Did you run into many problems switching to a carb? Also what wheels and tires where you running in this video?

[@86hyperstang]

Tinyman520 I did not run into to many issues i have to run my own fuel lines and new pump to support the carb fuel pressure. I am selling the 302 twin turbo engine without the carb. i am running US wheels 15x10 and 15x8 bfg tires

[@graphene1487]

When that shifter knob fell off I lost my shit 🤣