5” Rear Drop Step by Step🦍 00-06 Tahoe/Yukon DJM Suspension

Finally started Lowering the Tahoe!! Check out how to lower the rear of your 00-06 Tahoe/Yukon and some tips and tricks to help the installation process go smoother.
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
I used Djm Suspension parts, you can check out their website for all of the lowering components according to your truck or suv.
Rear shocks 1800 model
Rear links/relocation bracket with hardware rk2000
5 drop springs CS2000R-5
Alternate Brand Short end links with lower control arm relocation brackets #ad amzn.to/4iskVIu
Individual Belltech Street Performance shocks for rear #ad amzn.to/49AknMM
Adjustable Panhard bar #ad amzn.to/3Bs3sz6
Save 15% off Auxito Leds code Migo713
www.auxito.com...
Disclaimer: The information provided in this KZbin channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised.

[@clinthernandez9393]

Been following your videos for a while man, you’re the reason I dropped my Tahoe. I ended up getting the NorCal SS springs from your other Tahoe and haven’t had any issues yet with them 💪

[@MiGo713]

Awesome good to hear it!! 💯💯💯 Yes those springs I had there sat low and rode good, and Thanks for watching!

[@JoseRamirez-re2gg]

Can’t wait for that font end drop your a real one migo😎👍🏽

[@MiGo713]

Yes she needs that! And Thanks!!💯💯💯

[@navarroltx2580]

Can we see a full video on the yukon rear drop bro cuz I did the same things to my tahoe and urs seens lower

[@MiGo713]

This the video in my Yukon drop parts 00-06 Yukon 5/7 drop parts kzbin.info/www/bejne/fGSyh62HhJairtE

[@navarroltx2580]

@@MiGo713 I have everything besides the shock extenders and the panhard bar

[@nbsaddiction1522]

Same for a 4x4 lt? wanna go 2/4 🤔

[@MiGo713]

Yes it the same in the rear, except in the front if your lowering it you have the extra part for the axle to remove on the install

[@magdaleno3823]

How you added leds to the door handles bro & good video 🫡

[@MiGo713]

Thanks!! Here check out the full video on the door handles Led door handles on my 01 Tahoe Tutorial🤩🔥 kzbin.info/www/bejne/iHzIaoegdtp1fLs

[@stevenlxpez]

I’m on a 4-6 drop what size shocks you recommend the rear from DJM or Belltech?

[@nicholasbourgeois6131]

Can u fit 26s on ur tahoe with this drop

[@MiGo713]

Yes they fit

[@makepeace2850]

Nice 👍

[@MiGo713]

Thanks!!💯

[@obsangel2695]

A friend of mine gave me some 5 inch drop springs… can I put them then on my Yukon just like that or do I mandatory need the other supporting mods like shock extenders and etc..

[@obsangel2695]

Right now I only have 2 inch drop springs in the rear but I have stock end links and shocks.. I was wondering if I can just swap the 2 inch springs to the 5 inch springs and then buy the other mods later.. can I just swap them out no problem?

[@MiGo713]

You can swap them out but you risk damaging something, the lower control arms will be at a bad angle and that moves the pinion angle on the differential/driveshaft into your transmission, also the springs can pop out of place

[@obsangel2695]

@ thanks pa I’ll just wait till I get all the parts

[@MiGo713]

@@obsangel2695No problem!

[@johnnywhite238]

Look Badazz 🔥🔥🔥🔥

[@MiGo713]

Appreciate it!!💯💯💯

[@NBS_bo-deen]

U r tha goat 🐐

[@MiGo713]

@@NBS_bo-deen No lol But Thanks!!💯

[@TheOxidizer2k]

Nice! Are you planning on replacing body mounts?

[@MiGo713]

@@TheOxidizer2k Thanks!! Not at the moment maybe in the future if they need replacing

[@veecemx]

Damn your the first person that mentioned you didn’t need the adjustable upper control arms to reduce the wheel well gap if I knew I wouldn’t have bought them especially because the APOC ones would hit my caliper and caused my brakes to not work properly so then I had to buy the Spohn ones and that solved that issue, but if I knew I didn’t need them I would’ve just put the stock uppers back on and just bought the lower ones from the start lol, I have a 03 suburban with 6 inch drop springs but it honestly looks like it sits way lower than that even without the spare, tow hitch and third row lol so I def need to cut out the top of the frame cuz the panhard bar easily smacks like crazy, do you only need to cut alittle where the bar actually hits or should I cut abit more towards the passenger side?

[@MiGo713]

Yes I see what you mean, and Yeah the upper control arms are not needed for this drop unless you want to swap them as maintenance on your suspension with all new bushings, or maybe going lower bagged, they help adjust the pinion angle on your differential and driveshaft. On the bottom it’s about 4”to 5” that you cut out where the corner of the Panhard hits. Awesome the video helps out and Thanks!!

[@kingtony234]

Question. I lowered the rear on my 03 tahoe 3in. Should I have replace the end links?

[@MiGo713]

No it’s ok With the 3” rear drop👍🏽 after a 4” or more rear drop is when all the extra parts and labor needed

[@kingtony234]

@ thanks bro!

[@MiGo713]

@ No problem!💯

[@ChrisChoz]

Yo bro question can I adjust sphon control arms while they put on or I have to remove them and adjust them and also for the Panhard bar thanks and advance

[@MiGo713]

@@ChrisChoz Yes they can be adjusted after they are installed, you don’t have to remove them👍🏽

[@ChrisChoz]

@@MiGo713 one other thing bro I noticed today my rear end is uneven my driver side is lower and my passenger side is higher I’m running a 4/6 drop wondering if you know what’s causing that

[@coconf2099]

My 02 Denali has some spacer in between the sway bar bushing clamp. Looks like yours didn’t have it . Will that be an issue when installing this lit

[@MiGo713]

That’s a good idea to have it there, I’ve never put it on my trucks and they’ve been good. But yeah a washer will let it sit more flush for sure, I may add a washer later on but it’s Ok without it

[@Esxmar]

Do you have any video about electric window conversion I have a 99 with crank windows

[@MiGo713]

Not at the moment but I did order the wires to make the video one day soon when I get a chance

[@Esxmar]

@ I saw that video you have for the bagged truck I like how the buttons are on the center near the radio

[@bluestripsmaney8322]

Why does mine sway left to right when I get on 50mph

[@MiGo713]

Something could be loose or damaged from your rear suspension depending on the age or items you might have upgraded, a good place to start is checking your rear shocks or sway bar.

[@jacobDDonyoutube]

Never seen that kimd of notch

[@MiGo713]

Ah ok, yeah this is how it looks on the Tahoes!

[@Sacalabolsita_pwoeudh]

💯

[@MiGo713]

💯