5 Reasons Why a Keyless Remote Does Not Work

[@marty68wt248]

Last year nearly all car fobs in a local carpark near me would not work . After intense investigations it turned out the issue was a local ham radio operator transmitting on 433 mhz using many watts which blocked 99% of fobs when he was transmitting to most car remote frequencies of European , Japanese + Korean cars which is reason fobs only worked temporary. Worth trying spare fob , Not sure if this is the same in the united states .

[@andywoodbridge6350]

I would never of thought of checking a brand new battery, must of been on the shelf for sometime, changed to another dealer and worked instantly, thank you so much, this really was a headache 👍

[@4DIYers]

No problem, happy I could help!

[@nicholastrudeau7581]

How exactly do you know whether a battery you are looking at is new or not? What is the lifespan of a key fob? I'm thinking it may have just died on my 06 CRV.

[@abudujana13]

Thanks for the video and knowledge, 4DIYES

[@4DIYers]

My pleasure!

[@Nagrone]

Figured I would add my 2 cents, as I'm sure like many of you I came here because I was experiencing this issue. Last week I bought a Bluetooth transmitter for FM radio… I discovered that when it is plugged in, it interferes with my remote in some way and jams the signal. I have been doing research all night trying to figure out why my key fob only works sometimes and it dawned on me that it was plugged in right now charging A couple of Electronics overnight... I've only been having trouble with my remotes (I have 3) For about a week, which is about when I bought this transmitter. It's super clear and my radio sounds great, But I have a hard time getting my truck to lock when I run into a store or a gas station or my house if I leave the darn thing plugged in . Ran outside after buying a 2 pack and replacing batteries, just now, and pulled the thing put of the cigarette lighter... remote worked first try. And continues to work as I circle my house. Hope this helps somebody!

[@bedriprekazi9482]

Ash o the same thing as well, you may not know the truth is. If you're interested, let us help me with any questions you might have a

[@bedriprekazi9482]

Bon, the more likely

[@catzmarsh4714]

6th reason: FM transmitter or Bluetooth audio device blocks keyless entry fob. No issue locking the car with the fob but the unlock frequency is blocked. The FM/Bluetooth device only blocks the unlock frequency when it's turned on, unfortunately the power remains on to the device even when the car is turned off and the key removed etc. The device has to be manually turned off when exiting the car or the fob simply won't unlock the car. Luckily this car can be manually unlocked with the key... :^) Of course this could be a one off experience, eg this particular car (2004 VW Beetle) and or this particular FM/Bluetooth device (Response AR3142) which was purchased from Jaycar in New Zealand.

[@markdouglas5839]

My k9 remote light up.. but doesn't work..

[@jwfitz93]

I just bought a jeep a few weeks ago that didn’t come with a key fob. I ordered a new OEM fob and took it to a local lock smith to get it cut and programmed. New fob was transmitting, coded correctly to my jeep, and appeared to be completely functional. However, after it was programmed the locks did not respond. The locksmith even cut a new fob from his own stock and again, did not respond. $145 and no luck. I just got home to troubleshoot, and saw this comment. Sure enough, I had just put an FM transmitter in the cigarette lighter 3 days ago. I ran outside, pulled it out, and BOOM, fob worked on the first try. Thanks for commenting this!!! #6 solution for sure!!!

[@olapelumidestiny7332]

Qq+

[@AkuamiaLifestyle]

This just solved my problem. I appreciate

[@EmberHarrington]

Keyless remote is BS and worse part is if you have to get it replaced it can cost $300...and in some cases $500. INSANE!!! In the older days you could go to a hardware store and pay $5 to get a new key. WTF???? Only thing different is the Auto Industry gets now to suck a huge amount of money into Their Pockets for some %×!# peace of plastc. Are you kidding me???? Like I said B. S. !!!!!

[@4DIYers]

They're not all bad, when keyless remotes first came out they were a great feature. Now they're just becoming too complicated and the quality of parts isn't that good.

[@CS_Heavy_D]

You just saved me $100, thanks dude

[@4DIYers]

Awesome to hear don't forget to subscribe :)

[@cynthiajohnson8733]

Hey there. So I've tried all of the basic reprogramming and ect. The key fob works it makes a chirp when I hit the lock button but it wont unlock or lock my car

[@likedmusic5408]

Wow CHECK THE FUSE BOX! Very good 👍

[@4DIYers]

Thank you!

[@78_gordo48]

What do you look for in fuse box?

[@SWFCite]

@@78_gordo48 fuses

[@user-ql4ve5wf8q]

Hello! A year ago, my Toyota Camry 2014 key fob had stopped working. I've replaced the key battery a few times and after many troubleshooting, I've dug out my spare key, and the same problem with my spare as well. I'm thinking it may be a fuse issue at this point because I've tried replacing batteries on both keys and trying reprogramming, but I don't actually have a function key at this point. Any ideas about what it could be?

[@tanyaj]

I have a 2014 Camry as well and I'm experiencing this problem. It started last month where it didn't work for a day or so. It began working so I thought it was just a fluke. Now I'm experiencing it again . I don't believe it's the battery because I have a spare key fob and it's doing the same thing.

[@kkooloo5781]

How do you check the fuse if you cannot get in ?

[@graphicartdude]

You can also try cleaning the contacts with rubbing alcohol. While this didn't work for me, it works for a lot of faulty key fobs.

[@4DIYers]

Great tip, thank you for sharing!

[@graphicartdude]

@@4DIYers Apparently 99% isopropyl alcohol is what’s suggested. I ordered some to see if that will work better than 70%.

[@thetaj4278]

Where are contacts ?

[@user-tb2jy9lu3d]

Every once in a while, I've noticed that using the key fob on our aftermarket car alarm doesn't disable it and the alarm goes off. The alarm light on the dash will still be blinking armed even after unlock was pressed on the aftermarket key fob to disable the alarm. The car didn't have a factory alarm system on it at all beforehand and the aftermarket alarm system was installed at a professional place. It rarely has this issue. Other times, in a certain large parking lot of a specific business up the street, it doesn't respond to unlock/disarm commands at all for a while and finally does. Just some kind of interference?

[@hlq2action310]

Hi, my remote key does unlock the car but not locks it, but the remote light is on when i push on lock, i got 2 keys with a remote in both and it's all the same problem. It is about programming or the remote module is defect?

[@robertkajita1531]

Grateful you created this video.

[@4DIYers]

I appreciate that, thank you!

[@p.g.8138]

Not sure if I'll get an answer because this is an old thread. I had a weird problem with keyless entry. Walked up to my car and the key fob didn't work. I got inside the car and it worked. I got the other fob and it did the same thing. I bought duracell batteries and replaced both. It still was doing same thing and did it the rest of the day into the evening. I woke up and it started working and has been working ever since. I think that there is a number one and two fob when programmed. I'm thinking if the number one battery went completely dead it affected the number 2 fob. Maybe letting it go completely dead it may have lost its program and overnight it picked up the signal again.

[@smokestrong1000]

I replaced my key fob, tested the 12v battery, but the alarm goes off when I hit the unlock button with my old and new fob and has trouble recognizing the key. Not sure what's wrong with my car

[@albok7942]

..also check if battery wires are not disconnected.. mine was..

[@4DIYers]

Excellent tip, thank you for sharing!

[@marvinzwerneman2220]

4DIYers

[@08mraskew]

Bokhari Abdullah no, it works, just no sound,locks & unlocks

[@spectator3349]

@@08mraskew so what was the issue

[@caseycarnes2629]

This worked great!! Took me all of 2 minutes to do and saved me the money and hassle of getting a new one.

[@4DIYers]

Awesome to hear and thank you for the feedback :)

[@silver92simo]

thank you very much, i had the second problem and i solved it, and i saved money and time, thanks again.

[@4DIYers]

Excellent to hear, thank you for the feedback :)

[@msweet8356]

Just bought a 2013 Sienna came already with one remote. I have tried the programming steps for additional remote multiple times and it's not working. Is it because I already have a working remote? In your video I beleive you may have mentioned such a problem and wasn't sure. Please advise.

[@TheMrBennito]

And what if the car locks and opens with the remote control/key yet the trunk doesn't? I have to turn the key without starting and then turn the headlights on. I get an alarm beep, walk to the trunk and now can open it manually. Very weird!

[@Volvo_kay]

This video was a life saver! Thank you

[@who_ssamarah]

Hi I can unlock the car, open trunk , but lock is not working from Honda Accord 2006 keyless entry fob. both of the foob is doing the same. please suggest

[@williamrandolphjr6807]

I have a 1994 Oldsmobile Cutlass Supreme S and both of my key fobs aren't working.I've ordered over 5-6 key fobs and they will not stay programmed except for one it stayed programmed for 1-2 hours and it stopped working. Replaced the batteries, fuses have been replaced and still NOT working

[@Native722]

What do you do if the battery was dead on the keyless entry but if you open the door manually than the stinking alarm goes off?

[@quinones355]

It happen on my 200 chrysler open the door but cant seem to shut it down to be able to pe9gram rwmote

[@Dexter-mb8op]

SAme problem

[@andrewdarbyshire9108]

Put the key in the ignition and cycle the switch. This usually shuts the alarm off.

[@Dibi1821]

I recently changed my battery with in the last 6 months, and my light on my fob won't light up when I press unlock. Is it normal that these batteries die with in 6 months? Do you suggest new batteries?

[@floydherrera8898]

Thank you,I have a 2004 Nissan frontier that when I try to program keyless entry won't connect. I think every step connects but the last one and thats to see if remote works.any suggestions.

[@donnaschimek]

Now the plastic back won’t snap completely closed. Very frustrating. Everything lines up correctly.

[@cyuper]

Does the signal receiver ever go bad?

[@QuartetmanIA]

My keyfob will unlock but will not lock. Could this be an issue with a poor retaining clip tension?

[@אסףמוזגו]

Hey, first tnx. I have civic 2011 and my key remote open the truck and close the doors (sometimes after 5 clicks ) and sometimes open the car, ( after lot click), the battery is fine. What can be the problem? And how can I solved this? Tnx.

[@4DIYers]

Disassemble and clean the button contacts.

[@72Junopup]

I have a question. Both of my wireless key remotes worked just fine until the day my garage door repair man came and replaced my garage door wall mount and he reprogrammed the garage door car remotes. Then they sometimes work and sometimes do not work. Changed both batteries and they are both still acting weird. Could the reprogramming the wireless garage door remotes mess with the key fobs?

[@totaltwit]

What about these Sealey VS921 that check for a signal? Are these any good? They seem quite inexpensive.

[@sergiodario58able]

Hello On my 2008 Audi A5 Sport, the functions on my remote key fob have stopped, meaning i cannot lock and unlock doors anymore, nor the boot door, nor the fuel cap, not the retracting door mirrors. I can open the door with the metal key which is inside the fob, both main and spare key (the alarm will go off though) and the car does start when inserting the jey into the ignition hole. It's just the remote functions no longer work. It's not the battery inside, because i tried some new ones already, and the LED light on the fob does come on when pressing any button. So what in your appreciated opinion, can be done about it? Best regards, Sergio UK

[@prettybaby80]

I just came from the mechanic. They purchased a new key fob . I just purchased this car last month. They purchased and tried to program. Wouldn’t work. I now have to go back to dx the issue

[@tree0000-n8x]

Were you able to find out what was causing this?

[@lindauernheim664]

I have a 2010 Honda element when I try to lock the car the alarm goes off .i changed the battery still sets the alarm off when i try to lock .please help

[@bwj999]

#6 The "key" button under steering wheel is depressed. Push button.

[@mobileasaurus]

My aftermarket, clifford, fob has a spring antenna inside. It has come loose. I'm not sure what it needs to be connected to. Do you have a video to reccomend for this issue? Thanks.

[@jamescc2010]

2005 toyota prius only fob stop working to unlock and lock. The fob has to be inserted into slot in order to start a car. Any advise?

[@lumabi25]

There is a sixth reason: your car cannot "hear" your keyfob's transmission. This happened to me. I was mystified because I knew the battery was fine, but a guy from the local electricity authority approached me and said they were using a piece of equipment nearby that creates a lot of electrical noise over a wide chunk of the spectrum and that was why I couldn't open my car. He said they'd be finished in five minutes, after which time my car unlocked.

[@4DIYers]

Great tip, thank you for sharing!

[@mandelaturner2287]

I am thinking the same thing

[@Alfsp1]

My has only worked properly if I take the green board and button s out of the case and press my finger directly on the exposed button hahahaaha

[@shyleeswaim7388]

Both of my remotes stopped working in the same night.. HELP???

[@justinfarnsworth4628]

shylee swaim mine too!

[@casperparker9000]

Same

[@Glowy292]

Same did u fix it?

[@ivansuarez5179]

2:53 mine too

[@TonyYIsOn]

Did you fix it? How did u fix it?

[@VertticalSZN]

i have a 2005 altima and new key fob, the programming process was a success but when i try to test the fob, the car wont respond. i use a spare key fob on my 03 altima and it worked perfectly. help?

[@saintsamaritan]

I have two remotes with correct FCC #s (and all codes I got from the Dealership) for my 2007 PT Cruiser, one with the key cut that fits, but they don't work (the one with the matching key cut starts it only momentarily). How do I re-program these to work for my Cruiser without paying a locksmith big money? Thank you!

[@zeez9053]

Good question the situation is designed this way so the punter is made flustrated because he cannot get info and the dealer gets richer

[@Topczes]

4th reason what is this? I cant find it and dony understand u

[@richardmcconnon5092]

I've changed battery to fob and still no response

[@ramesherrabolu1590]

I recently replace Toyota Avalon remote battery. Since then the unlock button does not work all the time. The lock button works quite well. This happened on two avalons, 1998 and 1999. This suggests an issue outside of the battery being bad or the two remotes going bad same time. Anyone has suggestions.

[@cloudrehzii]

I have a 1996 v6 mustang . I bought 2 key fobs to reprogram. There is a clip in the trunk to short out when key is on to go into train mode but when I short the clip out nothing happens. Do you have any ideas ? I have yet to check the fuse but will here soon

[@brooklyn7941]

This sucks as this is my only way in the car as the driver door got hit and got replaced with a diffrent door

[@adtynkr]

My Pontiac G5 2008 remote word only to open the trunk and the alarm but not for locking, unlocking or remote start. I have checked the fuse and it’s good and also changed the remote battery. What could be the problem?? This problem is eating me alive. Please help!!!

[@harryb5573]

Hello my remote is not working. I checked the fuse and they are fine. The key is sending a signal so the battery must be fine. Any ideas? I am lost

[@plushpossum]

Mine works, but it doesn't automatically unlock or release the trunk if the fob is in my pocket. It should! I have to actually USE the fob to unlock the doors and the trunk. I know this sounds petty, but when you have groceries and your purse and a couple kids in tow, it is a pain in the butt...when it's supposed to work!

[@nasoninerjit8893]

Hi my BMW e36 1997 318is dolphin shape windows and central locking is not working wat could be the problem???

[@jldude84]

My Kia's fob did this after 8 years. No response from fob. Replaced the battery, still nothing. Took it to the dealer, they replaced the battery yet again (and gave me the new one free), still nothing. Now I guess I gotta find the fuse and hope it's just blown.

[@bilicbuilt]

My isuzu 2007 NKR remote control stopped working locksmith changed battery-noting went to isuzu dealer they sold me for $130.00 new key with chip instructed to go to locksmith to cut and to come back to reprogram it after few trys they could not do it, they say it could be receiver that was it they weren't sure that's way they could not help can you please suggest

[@orlandojohnson5742]

Some great info! Now if I can find all this stuff in my Chrysler LHS.... remotes good but won't lock doors or arm alarm... chkg fuses next... thanks!!!

[@cynthiajohnson8733]

Did you ever find out why. Mines doing the same thing

[@DavyDave1313]

Mine wouldn’t detect the key fob in a 2017 Mustang GT. Replaced the batteries still nothing. Placed key in the little slot in the cup holder and it only detected it one time and after that no more. Had to tow it to the shop. Had to spend $1300 to get the problem “fixed”, and it still doesn’t work right. They told me they rewired the custom radio, removed the rest of a shoddy alarm install done by another shop, reprogrammed the keys, reprogrammed the car computer, replaced old modules that the other shop used with up to date modules and placed a cup holder sensor that was missing and would now detect the key fob in the cup holder. Still ended up with the car not responding to the key fob anymore, but now I can place the key fob in the cup holder slot and it brings the car on and allows me to lock/unlock the car with the key fob for a few hours before becoming completely unresponsive to key fob. I feel like I got ripped off, but they are still troubleshooting and we are going to put the stock radio back and see if that fixes the issue. So I’ll just hope the new shop can get to the problem without it becoming more expensive.

[@liminal.lizzie]

So suddenly my remote key stopped working, but when I insert the key into the ignition and press the buttons it does. Could this be a problem with my car?? (I have a Crysler Sebring 2002)

[@Mickeystyles1]

It worked for me when i removed the battery terminals for a few mintes and then put the terminals back.

[@jomami3704]

everything works but it wont START my car. locks and unlocks fine but it wont turn on- the car is fine i know it has to do something with the key cause i just replaced the key cover as it was falling apart

[@henryperez6486]

Where I can find antenna module for Chevrolet triablazer 2005 I try to find what the problem with the key fob and back door don’t lock 😭

[@freddiewhite1403]

Hi maybe you can help me my 2006 Jeep commander remote key stop working all of a sudden and I’m getting a message on the dashboard check tire pressure system. My inside door locks works fine. I’ve changed the batteries and the remote still not working. Someone please help!!!!

[@johnhlockwood]

I'm stumped. I have a 2004 Explorer - keypad works, FOB doesn't. R&R battery in the FOB, no change. I eliminated it being the FOB by being able to program the FOB to my Ranger... FOB stopped working a couple days ago but worked fine until then. Does one fuse control both? Does whatever the controller is have a FOB side and a Keypad side?

[@debragonzalez9800]

I have a 2005 Honda accord. And as a new widow I’ve got to figure this out on my own . I’m having a couple of problems. A viper alarm has been installed and the fob stopped working. Changed the batteries and it lights up but still doesn’t work. I’m assuming it has to be reset. That’s where the issue comes in. I cannot get my key in the drivers side door due to someone putting something in the key hole. I can’t get the key inserted. Is there anyway to reset the fob???? Thank u for any advice u can give me.

[@4DIYers]

If you know the model number of your alarm system, you can usually find a user manual for it through Google. The procedure will vary, some have a reset button on the side of the module. To get the model number, you’ll need to find the module box in your car. If I had to guess, it’s probably under the steering column. That was a very common location.

[@hymen1847]

Also try holding the unlock and lock buttons down for about 10 seconds while you are sitting in the car and re synchronizing. My manual told me to do it and it work out for me. My unlock and lock buttons were not working but the gas door was. Hopefully this helps someone.

[@4DIYers]

Excellent, thank you for sharing!

[@samndoci3121]

Tony Danza you mean both buttons to hold them down for 10 sec in the same time?

[@Robjohnnetwork]

I replaced new batteries 2 times should I just get a brand new fob maybe the circuit blew out ?

[@the40yogamer]

so my battery died in mine I think got a new one online programed it worked the first day then stopped got the battery for the og one and the car won't accept them either when i do the whole open door close door thing can auto zone reset it for free or do i9 need to go to the dealership?

[@billmadison5610]

On key remote will start 1999 ford extended. Truck but will not unlock doors or relock doorss.theres 5 switch as on remote.

[@ASO7467]

My fob never opened everything, there was always an issue. First the passenger side stopped opening, then the trunk, then the drivers side. The only thing that opens is the driver side sliding door, and sometimes the passenger side sliding door, and the locks inside the car, same. My issue is that it stopped beeping about a year ago, changed the car battery and it started working again, now it stopped again. The theft light is still on in the car, and you can hear the back door locking, but no beeps.

[@27314112]

I need help....so, I have a bunch of key fobs that I found on the street in a leather case. I Inspected the bag that they were in but found no address, phone number or any info that I could have used to return it to the rightful owner so I kept them all. This was 2 years ago. Today, ingot curious after finding them in a closet I was cleaning out. The fobs are of many different car types. There's Mercedes Benz, Dodge, Fiat, Ford, Mustang, and so on and so on. My question to you is, could there be a possibility that I could sell these key fobs? I mean, granted, they are probably programmed to cars I will probably never see, but can these fobs be reprogrammed to match a certain car type? I would appreciate if you could help me out here. Hey, times are rough financially for me and well, if this could alleviate my problem, I'm all in to try and sell them. Thanks!

[@lspr215]

I have a back up fob and both fobs will not work. Only when I open the car door then the fobs will work. The car sits in my garage for the winter idk if that has anything to do with it or not. And idea what it might be?

[@leonahauf1290]

Thank you.

[@4DIYers]

You're welcome!

[@BryanG830]

The lock button and unlock button and trunks release button doesn't work anymore but the panic button does and the red light still blink when I pushed all buttons just doesn't work except the panic button.

[@vickiebazer4522]

I have a 2008 Suzuki XL7 . Driver side an back Driver side does not unlock when put into park or locks with key fob.. any idea what it could be? I also have remote start an never had a problem with any of this..

[@4DIYers]

Sounds like you either have a faulty actuator or an issue with the wiring going to the actuator.

[@krishkapadia8790]

Unfortunately my keyless remote was in car n car was locked n i have also second keyless remote but keyless remote is at my home so from my home to my car remote will be word using cell phone?

[@donotwantahandle1111]

With my key fob I put a new 3v battery in it but after trying to unlock/lock the car, it went down to 0.3v! Do I need a new keyfob?

[@4DIYers]

Sounds like it was a bad battery. Some batteries sit on a store shelf for long periods of time and eventually they'll deplete on their own.

[@kellyrabe5180]

I have a 2001 Jeep Grand Cherokee how do I get the anitthft lock light off see I can yes my Jeep please help

[@lawrenceasem-deituamukelle2783]

How do I solve the keyless access system problem which makes it impossible to open the car just by holding the handle

[@rp17rionda]

Do you really need a working remote to program another??

[@4DIYers]

With most manufacturers yes.

[@joed8016]

2003 mustang. Worked good since I bought with great range. Now range is down to next to door. Replaced batteries and the same poor distance. Bought new fobs. Same poor distance after programming them. What could it be? Y do I have to stand next to door now when month ago was 50 ft? New batteries n new fobs and same poor range. What could have changed ? Don't say better antenna on fob because it has done 50 ft or so no problem. Just would like to have more than 2 ft again. Ty

[@4DIYers]

Batteries can be an issue as some are stocked for a long period of time, eventually losing their charge. I just had that issue myself and the batteries ended up being worse than the ones I removed. Another issue can also be an antenna but not relating to the remotes. The car's antenna has either failed, issue with the wiring, or corrosion.

[@rolandoclarabal6418]

Sir please help me my car won't lock both in the key or in the door but the unlock is working..thanks

[@drsudz]

Or... You're my mother-in-law and the CAR battery is dead.

[@debrasantos1769]

My car was recently hit from the back and now my keyless remote will not open or close my car?

[@mandelaturner2287]

Just changed my battery, it wouldnt work at all. Put the old ones back in, and my fob works when it wants to

[@4DIYers]

Sounds like the new battery isn't fully charged and most likely old stock.

[@harrycasto3104]

I had 2 keyfobs that stopped working my door locks. The batteries on both were 3.2V so they were great. While the batteries were out I took some electronic cleaner and sprayed it on a cotton swab to clean the contacts, reinserted the battery and voila! Keyfob #1 was working again - just needed the contacts cleaned. Keyfob #2 I had to take a pocket knife and GENTLY scrape the crud off the keyfob battery contacts to make them shiny again, cleaned them with the electronics cleaner sprayed on the cotton swab, reinserted the battery and voila - keyfob #2 working again like new! Dirty contacts was the problem with both my keyfobs.

[@rehanakhter4345]

What if remote is able to open the door but unable to lock the doors?

[@gordonhodo7200]

I have 2006 ram the key with chip and lock and unlock buttons. it will start car but not lock or unlock doors. BUT!!!!!! I have plan key with no chip or buttons if I put in ignition and turn forward then take out other key will now lock and unlock BUT when use key to start the car the lock and unlock buttons no longer work??????

[@ciusesnal4335]

Where is located the module entry system?

[@zeez9053]

Seen video where one was located at side pillar on back seat

[@mermaidmonroe1947]

Thank you in 2022

[@4DIYers]

You are very welcome!

[@MiOEvO]

I can't find the alarm fuse for my 2006 Mitsubishi Evo iX MR. 😫

[@gabbymijares5728]

My key fob will only unlock sometimes on my Ford Fusion 2013 and sometimes I have to open it with the actual key that comes with it and once I open it the buttons on the car to lock/unlock won’t work unless I turn on the car and i went to the dealership and they wanna charge me $130 just to check what’s wrong with it.. know anything I can do?

[@Mill835]

I have purchased 4 key remotes for my Kia 2012, they have new batteries, they used to work then completely stopped working, I purchased from the dealer at $99.00 for the remote and $99.00 to program, thats over $200.00 with tax!! Remember I said I have had to replace 3 and the 4th wont even program. I took it to an reliable auto remote dealer Who tested my remotes and and they were not able to program it themselves and told me my only other option is to take it to the Dealer!! I am told it is $150.00 just to look at it and tell me why my remote wont program, and this does not apply to the cost if I would agree for KIA to do the repairs because then the remote program is another $99.00, this is high way robbery, any suggestions?

[@4DIYers]

This may help www.hendrickkia.com/manufacturer-information/kia-key-fob-tips-and-tricks/ Some vehicles now are dealer only programming, but that's something which happened in the last few years. It's becoming harder and harder to do things like this without needing special equipment. If that option above doesn't work, a Kia forum or Facebook group may know another way around for avoiding the dealer.

[@CMRinehart]

What about faulty actuators? My remote doors work using the fob but trunk stopped opening. Even the remote button inside car doesn't open trunk.

Sixth cause, which I experienced recently. I have keyless entry and my trunk buttons stopped working on the fob and the dash. Turns out, there is a button that disables the trunk remote opening, located in the glove box, which had accidentally been pushed. This is so that when you valet park you can secure the contents of the trunk. Took it to a garage and they were stumped also for awhile, then figured it out, no charge to me.

[@kevingomez6652]

I own a 03 Hyundai Tiburon and my key remote won't lock or unlock but the alarm won't sound it will flash the light and the car doesn't turn on neither what could it be ??

[@vicana8821]

Just wanted to share this for anyone who struggling to program a z3 two button keyless entry key. Have read and watched a lot of KZbin videos but just today came across an additional step that just fixed it. Steps Ensure all doors boot and bonnet are closed Turn key to 1 and back within 2 sec pull the key out Press down on the back button(rectangular one) while holding it down press the round button 3 times. Now release the rectangular button- the led light should start flashing. Move the key close to the rear view mirror about 15 cm and push either of the buttons and the locks should work. Get out of the car and rest locking and unlocking of the car. My car is a 2012 2.2i model ..good luck

[@4DIYers]

Excellent tip, thank you for sharing!

[@michaeleffinger2220]

The Lock to my convertible top will not lock it will not engage is just live about 3" open could someone please help me 2007 Corvette convertible...

[@davidnaugler73]

Hi, I own a 2004 Chrysler PT with wireless remote; it can unlock the doors or sound the alarm. I don't use it, rather I keep in a drawer if I need it. Lately as I drive around the door locks are activated at random. I think this is because wireless remotes have become popular and the airwaves have become filled with remote key codes. How can I deactivate this feature? Thanks.

[@jz_146jammer4]

one remote still works and I replaced the battery on the one thats not working same thing it doesn't work. My guess is the remote is bad. I only used this one all the time the other was never used so it still works fine.