I’m gonna be honest; as a lifelong Transformers fan, I don’t mind any of these mods aside from one: completely gutting his “belt” area. I’m sorry but the removal of so much bulk there looks atrocious to me and it looks like an unfinished figure. G1 cartoon Optimus always had a distinct and wide “belt”, and in terms of his silhouette, G1 Prime’s body started out wide at the top, narrowed slightly in the middle, and widened out at the belt again, effectively creating an hourglass figure, albeit very slightly. With your modification Prime’s body has more of a triangular figure, starting wide at the top and continuously narrowing until you get to his crotch. I apologize for my harsh language, but I frankly cannot see how that modification looks better to anyone.
@kenjianimates2 жыл бұрын
iaifj
@Bugles_McGee2 жыл бұрын
Agreed
@BakaReviews2 жыл бұрын
agreed the removal of the "bulk" of the belt just looks worse and doesn't add anything from what i can see
@luigifaniac13122 жыл бұрын
I honestly think these mods are almost completely pointless cause it defeats the whole point of the figure, it is CLEARLY a homage to the toy, with only a bit of animation model thrown in. Though the articulation mods are nice.
@MaximusZayd2 жыл бұрын
I know that Tommy says that he has a problem with the "silhouette" with the 'belt' attached, but as Transformers fans we easily recognise that the 'belt' is just as necessary in the silhouette as the chest windows or the smoke stacks of Optimus, because it's what makes Optimus as a whole (with a few exceptions of course). (Unless you're the kind of person who prefers the TLK Optimus design, then I could see why you wouldn't like the 'belt')
@ZernektinAnimations2 жыл бұрын
I understand removing the wheels because it’s not animation accurate and is more a fault of the transformation but removing his whole battle skirt doesn’t work, it makes his legs and body seem to skinny and gets rid of a major design part of g1 Optimus prime which this set is trying to capture
@chrishart82512 жыл бұрын
I hope they keep going with TF Lego. Want to see Soundwave with all his cassettes.
@daysbeforerodeo2 жыл бұрын
YESSSS, soundwave is such a badass
@shamanaseem71652 жыл бұрын
They could make screamy and release skywarp and whoever those were who looked similar to screamy as recolors like they do with cars
@Extremezotako Жыл бұрын
fr
@Christopher-mj6eo Жыл бұрын
@@shamanaseem7165 Blitzwing and Thundercracker are Starscream’s lookalikes. Skywarp is the Decepticon triple changer.
@timothy.2401 Жыл бұрын
@@Christopher-mj6eo you got it the wrong way around, it's Blitzwing that is the triple changer
@snakeeater67382 жыл бұрын
While I agree that a dedicated robot mode would’ve been better, the amount of outcry LEGO would’ve gotten for finally making a Lego transformer that doesn’t transform would’ve been bigger than the outcry we have now
@MrCranebay2 жыл бұрын
Yeah, the whole point is to have a Lego transformer that actually transforms.
@superxavxii4212 жыл бұрын
Very true
@ryanmachdan64412 жыл бұрын
It's easier to mod the transform robot to the untranform dedicated robot.
@luismarin35002 жыл бұрын
Mfs would complain over anything
@spencerandmainzwithcoffee2 жыл бұрын
At least we got a figure instead of them doing something like a bust of Optimus Prime's head or a brickheadz of him. Then we would have definitely gotten an outcry.
@cripnite2 жыл бұрын
FYI, you can remove the two 1x3 plates from the fingers and use them instead of a 2x3 on the butt. Solves two things at once.
@teksu00822 жыл бұрын
3 million iq move
@spaecii2 жыл бұрын
Literally what I did I just got mine yesterday lok
@spaecii2 жыл бұрын
*lol
@autism_giver7002 жыл бұрын
thanks cause theres like a 99percent chance i don't have that piece
@inflewence2 жыл бұрын
Nice thanks
@atlaspax112 жыл бұрын
The first thing I did with my Optimus was swapping out the grey windows with blue ones
@GOWONSKIE2 жыл бұрын
I should do that
@naveedLbisram2 жыл бұрын
Oooooh nice
@LeopoldLitchenstein2 жыл бұрын
Tempted to do the same. First thing I did was flip the leg panels so the stickers are placed correctly since they're incorrect in the instructions
@Day1mz2 жыл бұрын
Noice
@karntom1012 жыл бұрын
I assume its the Wall Element 1X2X2 Design ID: 35378 ?
@jacobcox45652 жыл бұрын
I feel like adding knee joints that don't compromise the transformation and stability of the figure can be done.
@wwoptimusprime2 жыл бұрын
Can be. I've done a version of it. Seen others too
@feetlettuce2 жыл бұрын
@@wwoptimusprime it dosen't stand up
@wwoptimusprime2 жыл бұрын
@@feetlettuce it does. With the right joint. :)
@kenjianimates2 жыл бұрын
yeah it looks a lot better
@wwoptimusprime2 жыл бұрын
Check my Facebook album's. Got a bunch of pic of mine up there, with the mods.
@SP-fc9bx2 жыл бұрын
I'm very happy with this set. Honestly, I get making things more true to the cartoon. However, I feel this model is very true to the actual G1 toy, which for me, is more important.
@Slacking022 жыл бұрын
Surprised you didn’t change the chest windows to trans light blue
@Heattokun2 жыл бұрын
What I suggest: you can combine the first mod with the 1x3 on fingers removal step, replacing them on the buttocks so you don’t need new parts
@neosquirrel2 жыл бұрын
I’m so glad you started this right off with those two triangle wedges on his posterior. I went back a few I was in the instructions thinking I had done something wrong as I got the exact same result as illustrated. Turns out it’s just a design flaw! Thanks for that one especially!
@DCLXVIDS2 жыл бұрын
You totally seem to overlook this lego set is a remake of the original toy. not of the screen character. and in my opinion most of these mods take away from this specific look. Also, you talk about it all not being strong, and next thing you take away from this more. maybe the fingers of your model stay on like that but there's a tolerance in the mold fitting and for some people the fingers will fall off when you remove that 1x3 plate from them. And the wedge plates as well as the 3x1 plates make a big part of the integrity of the truck mode. Lego did not get it "completely wrong" because you don't understand what they were going for, or have no insight on why certain things where done the way they were done. It's mods we maybe could do, but really shouldn't.
@harrisblastaar50812 жыл бұрын
Excatly!!
@adrianhjordan19812 жыл бұрын
100% agree!!
@theonepstein51002 жыл бұрын
💯
@KilosFoxo2 жыл бұрын
it's more of a hybrid between g1 toy (the darker blue grey stripe in truck modeand wheel placement), g1 cartoon, yellow crotch plate, jetpack, axe and blue eyes), masterpiece, silver shin vents instead of blue, and rts ledends class optimus ( general transformation and they share the same designer
@ziingabox2 жыл бұрын
Bro, if we wants to modify it let hime do it. Theres no rule, sure LEGO has its own purpose, but he continously says that you should do the mods for robot mode. Everyone has their own proferences so let him be.
@Omar_ZX8 ай бұрын
1:30 oh ma gawd jobby's mp10 video, you just unlocked a core memory
@mspy-u5x25 күн бұрын
Man i love the head he made for him
@DeliveryWave2 жыл бұрын
Another mod I recommend is not for Optimus Prime, but for his Matrix. Swap the Gray and Orange transparent upside-Down 2x2 Dish pieces for Transparent Blue (light blue). Also swap the Gray 2x2 round plate for an orange one. Then you will have an accurate looking Matrix of Leadership
@rafapazos062 жыл бұрын
That is the 1 mod my 7 year old made to this set. And the one inside the chest. I wholeheartedly agree with the mod. If only the ax could also be made blue.
@DeliveryWave2 жыл бұрын
Why the axe?
@rafapazos062 жыл бұрын
@@DeliveryWave He saw it blue in a new Transformers series. Probably Ciberverse but might be other. He says Energon is blue.
@DeliveryWave2 жыл бұрын
I stay G1. His Axe was Orange. Additionally, energon has no distinct color. In G1 (s1) it was white with rainbow-y specks. In animated it was solid pink
@rafapazos062 жыл бұрын
@@DeliveryWave Yeah, I tried to explained him that the colour might differ but he was adamant. Well, he just turned 7. Lots to process. He also said he is not building the jetpack that comes with this set because Prime needs no jetpack.
@captainfordo39782 жыл бұрын
3:07 NGL, that pose u have Lego Optimus Prime in looks pretty BADASS. Now he looks much better & G1/Cartoon Accurate. I'm not even finished with the video yet, but I just had to point this out real quick.
@BlackNoirCos2 жыл бұрын
Ah yes just what I needed. 5 Simp Mods
@sleepycowslegocorner91272 жыл бұрын
Thank you so much for featuring my head mod! How ever it shouldn’t effect the transformation since it’s the same size as the original one (just one plate shorter then the original one)
@Kevinas1124 Жыл бұрын
Are you able to do your mod with all the parts in the set or are additional ones needed? Thanks so much!
@HeathsHarleyQuinn2 жыл бұрын
I cannot personally imagine a Lego kit of Optimus prime being worth it unless he can transform without having to rebuild him. If you had to, he's not much of a transformer! So props to let go for making it happen. I would give up the perfection of robot mode for transformation anytime.
@nps10162 жыл бұрын
Good mods, but a major one is adding knee joints. It would make the figure more balanced and add some articulation to the legs without affection the truck mode.
@jmurray1110 Жыл бұрын
Unfortunately I just don’t think this design can be supported with knee joints It’s already really fragile in places so adding extra points of weakness probably won’t let it support itself Besides the ones in the arms already feel too weak so imagine trusting them to hold the weight of the torso
@aircraftcarrierwo-class2 жыл бұрын
Actually-- the 2 1x3 plates you pull off the free up the fingers can be used to replace the gray wedges on his hips, instead of the shown 2x3 plate. It should work just as well and uses parts that came with the kit, rather than having to get any extra bits. That's what I did.
@BWayne-si9ev2 жыл бұрын
Good call. I’m going to do this
@Pupp3tmaster-uq3yz Жыл бұрын
This was a very polished build, and honestly, if I ever get my hands on this, I am fine with how it looks as it is. When making things with Lego it is very hard to make something that looks very accurate to the real thing.
@zegop57362 жыл бұрын
If you get the speed champions Lamborghini countach and swap out the white for different colors and you can have sideswipe, sunstreaker, red alert and various other characters that use that mold (extra pieces needed for the booster and sirens) sure they won’t transform but you can either have a convey in truck mode or have Optimus doing the “transform and rollout” pose in robot mode
@Benjamin01192 жыл бұрын
The only problem is the roof piece only comes in white, and I don't think they are scale?
@beatrixwickson84772 жыл бұрын
I had already done a red swap out for the Countach before I got the Prime. It's not easy but it actually does scale well with them both now around 1:28 scale. MP10 is actually way too small in truck mode for example.
@beatrixwickson84772 жыл бұрын
@@Benjamin0119 yes, the roof piece only comes in white but there is a red one within the straight window edge but a small strip of red PVC tape was an exact colour match.
@Benjamin01192 жыл бұрын
@@beatrixwickson8477 Hmm. With semis being huge and sports cars, including lamborghinis, being pretty small, you might not be too far off.
@feetlettuce2 жыл бұрын
You can buy another one to make a robot version
@TheEmoPainter2 жыл бұрын
Love this, the replacement bumper/belt buckle fits perfectly above the matrix inside for storage. My main issue is how the whole body comes off when transforming, the bit that connects the top half to the bottom half which is the rotation peice just isn't strong enough.
@Fra_Romazaki2 жыл бұрын
The thumbnail: ✨ 5 SIMP MODS ✨
@matthalo892 жыл бұрын
Just built mine. Awesome set. Going to look into some of these mods.
@taz0304852 жыл бұрын
A mod I have done, is add 1x4 plates under the toes. Since the original model has a slight forward lean, and the plates make his stand more vertical and don’t affect transformation at all.
@Theorymus2 жыл бұрын
Awesome!
@bottiglia_772 жыл бұрын
Hi
@numa_kai2 жыл бұрын
someone send this to Jobby the Hong
@forgedtofight2 жыл бұрын
A clip of his mp10 review was in this video
@stantonbain59362 жыл бұрын
What I did with mine was move the ear fins down by one stud and used a 1x1 clip piece. It makes the ears a little shorter and more accurate to the toys and cartoon.
@GMDGeek2 жыл бұрын
My concern (I am building my Prime this weekend) is from my Voltron build where after a year of the lego kit being in individual lion modes the black lion started falling apart due to the thing pieces weakening over time. I ended up 3D printing stronger hinges that would stand the test of time better. I'm wondering if this will be an issue on Prime.
@gundamzeta34472 жыл бұрын
Sorry to here that I haven’t got the Optimus yet but I do have the Voltron and it’s been in the combined mode for a year (I only go into the lions just to show people) and it’s been fine so hopefully it’s just bad luck on your part and it won’t happen to the Optimus Prime.
@ronsarmiento20032 жыл бұрын
Awesome! I'm building right now. Will definitely do the mods. You just got a new subscriber
@heroldofvortos1782 жыл бұрын
All those tios are very useful. There is one tip I yet need to find, for giving knee joints for his legs.
@santiagolopez19242 жыл бұрын
I have made some small, but significant changes to me. I added some smooth curved pieces at the edges rather than in between the headlights because that would have looked weird to me. I also added some smooth red flat pieces to cover up the white stripe and it looks much better in my opinion.
@stefansauvageonwhat-a-twis13692 ай бұрын
Fair good stuff, smart of the designers giving those posing options so accessible
@ROMANEMPIRE692 жыл бұрын
The fact that Lego was able to engineer a set that can transform is nothing short of amazing. As far as accuracy goes like at the first vw beetle Lego set made. It does look very beetle like the second one looked a whole lot better. The fact remains these are Lego sets. Are any of the mini figs proportionally accurate? 😜😜😜
@RealBumbleedits2 жыл бұрын
Honestly, What I want Lego to do is some Disney + show sets, And some more Transformers ones for display Edit: I just want some Moon Knight minifigures and sets
@Jay-Zech2 жыл бұрын
Same about the Disney+ shows. I want WandaVision sets. It sucks that all we got from the show were the 3 CMF figures. And I would love Moon Knight sets too
@RealBumbleedits2 жыл бұрын
@@Jay-Zech Yeah I feel like Wandavision and Moon Knight would work well
@soniacu15542 жыл бұрын
Same. Offical Moonknight sets with minifigures would be so great.
@o.8.p1492 жыл бұрын
I really only want more Transformers sets
@RealBumbleedits2 жыл бұрын
@@o.8.p149 I mean, That's fine I was just stating my opinion
@foxyplayz13992 жыл бұрын
I wasn't expecting you to care about this boy but I was surprised you did so now my day is good
@slashercyanide7562 жыл бұрын
im thinking of a doing a nemesis prime/scourge conversion when i get mine
@Speddicus-Maximus2 жыл бұрын
Me, who can’t afford Lego Optimus prime right now, but is planning to get him
@WelshGiraffa2 жыл бұрын
Just got one for Xmas so I’ll definitely keep some of these in mind especially the waist to stop his cab popping off when posing hopefully when I go to my closest Lego store I can pick and brick(love that pun for a Pick’n’Mix) that 2x4 deep blue tile like you used
@JohnnyReed-x8q17 күн бұрын
Can you do one for bumblebee?
@wwoptimusprime2 жыл бұрын
Question, when you tried transforming him with SleepyCows head, did you turn it around first? I ask cause that's what I did and he transforms fine. :) (thanks for the "heads" up on him by the way, lol).
@matoro41402 жыл бұрын
the belt mod just looks...bad. the ten miles of legs with no hips is not good. and after building my copy of prime... yeah,, the complaint about backwards movement is totally false. all you have to do is open his legs one click, and the plates will slip right by
@stuartleighton2 жыл бұрын
It's great to work out that Optimus can flip the bird. Very happy with this LEGO set. Got the new Batmobile to build next, which is the crappest of all the Batmobiles (and no mini figures) but I needed it for my Batmobile collection. Do you think a Megatron is coming out soon? That would be very cool.
@dustman-nj2hm2 жыл бұрын
i have to be honest the model design is wonderful and these mods made it even better,if get my hands on that set i swear, ill make the knee joints XD
@hamothemagnif85292 жыл бұрын
No knee articulation adjustment?
@Cynical.99929 күн бұрын
took the tires off and put the plate with the relefctor in the same spot u did but also took the head off and put it on the studded parts near the lights and flipped where the platform for the head straight to give it that less bulk look in the back. Hope this helps some people out abit
@KronoX012 жыл бұрын
thats so Cool i need one more thing to do these a LEGO Optimus prime
@thomaslambert9668 Жыл бұрын
i personally put them wedge plates on his arms, it may not be part of the design but it goes and suits nicely
@Drew_stopmotion Жыл бұрын
Thanks for these cool mods.
@JohnnyGearBot5 ай бұрын
Do you have a video on how to make a scale down small version of Optimus prime?.
@camtron1967 Жыл бұрын
I used the 2 1x3 plates that hold them fingers together and used them to make the legs move back because I like having individual fingers
@nightriderjazz2 жыл бұрын
That solution to the eyes is a must for me. I can live with everything else, but I just really want something to improve the overall look of the eyes/head
@endeavor12992 жыл бұрын
And then there's me, who made some simple mods to him and his accesories but to make him more similar to his movie versions...
@bottiglia_772 жыл бұрын
Which movie?
@endeavor12992 жыл бұрын
@@bottiglia_77 the first three of the bayverse
@TravTrevTV2 жыл бұрын
The belt is accurate, optimus's pelvis is wide in the cartoons
@briickhead18862 жыл бұрын
This the best video I’ve seen from ya, too bad I already have something else I want for my birthday and the holidays
@noahim64412 жыл бұрын
I thought you were going to make a trailer for prime considering he has one that can transform.
@TommyCBricks2 жыл бұрын
It’s already been done :)
@brockpigford29532 жыл бұрын
Yeah by Hachiroku
@noahim64412 жыл бұрын
Figured you make one and have instructions of your own
@noahim64412 жыл бұрын
Plus there was no rover made as well
@andreireubenАй бұрын
Btw for the truck mode you can place the jetpack at the studs of the truck in the legs
@jamesgroccia6448 ай бұрын
If you take the shins off and move the socket one stud out, you get knee flexion at the cost of figure stability
@reaperxxzify2 жыл бұрын
"5 simp mods" i like it.
@JustANormalNekoGuy2 жыл бұрын
Finally!! I was waiting for this!
@dolgelk19872 жыл бұрын
There is a very tight hinge joint with technic beam. I am pretty sure that unlike the regular hinge this one will hold the weight of the figure in the knee section
@Tech______2 жыл бұрын
i am happy that theres no kible
@Itransformit Жыл бұрын
Thanks for good tips on how to improve the build. I've seen a few head mods out there that look even better than this, so I might use one of those instead. The eyes just don't look good to me.
@timthetatmanfan51112 жыл бұрын
Thank you for the tips
@fungboy39932 жыл бұрын
Moving the shoulder pads like you said and the bit that keeps the fingers together you can actually get him to hold the Matrix by his 1st and 3rd fingers just about with both hands. So may want to extend the fingers out somehow. I am going to look for a blue glow piece to replace the orange one on the Matrix hopefully
@tykiradx47592 жыл бұрын
I wish knee joints were added
@tfGalvatron12 жыл бұрын
theres a great mod you can do where you're able to actually rotate the entire belt section around so that there's no more partsforming
@Th3DankestMemer2 жыл бұрын
Can you give a link, please?
@Freediddy2113Ай бұрын
I swear how did KZbin know i was getting this for Christmas?
@sirtimothy922 жыл бұрын
1:31 is that our Swivel God?
@verticalnote2.0932 ай бұрын
Yes!!!
@inkely2 жыл бұрын
I understand there was a Function & Accuracy thing in the lego, it may be a little inaccurate but some things that lego added for the function, and also tried less pieces and simplicity.
@EthanRFilms2 жыл бұрын
I really like this set, and I love the transformation part!
@charlesduval23692 жыл бұрын
What about adding ball joints to the knees
@OhJustConnor2 жыл бұрын
Definitely doing this, I bought 2 so no need to worry about the parts forming
@KilosFoxo2 жыл бұрын
I think replacing the 1x1 angled bricks on the roof lights with the trans yellow studs might fix the Shilloette
@adammartin793 Жыл бұрын
I know I late to this but if you go by the original toy the tires were on his hips and the belt is more accurate just pointing it out in case it wasn't already
@woah6638 Жыл бұрын
One more modification is that (for me) the 6 orange bolts on the bottom of the feet makes Optimus prime lean forward so I just took them off, and the leaning stopped.
@marvelguy62922 жыл бұрын
I REALY hope sometime in the future they make a g1 Meggatron and Soundwave
@TommyCBricks2 жыл бұрын
Unfortunately I don’t think you’ll get a transformable Megatron mainly because he transformed into a gun I could see them giving just a normal Megatron model but then people would complain that he doesn’t transform as for soundwave however I see that one being much more likely
@marvelguy62922 жыл бұрын
Maybe the Megatron set could not transform? But I do hope Lego does more Transformers down the line. Also thx for responding to my comment
@Dairobo102 жыл бұрын
@@TommyCBricks doesent really need to transform into a gun later depictions of him transform into a tank but also goes onto the lego rules best alternative is a helicopter like the one in transformers animated
@russellharrell27472 жыл бұрын
I’d bet on starscream being the next transforming set, he’s a vehicle and even if he’s a jet fighter that’s not too far from what Lego normally puts out.
@adrianhjordan19812 жыл бұрын
I'm actually hoping they do 2 sets each year. 1 Autobot and 1 Decepticon. Imagine a Lego Grimlock!!!
@bimmerfan21262 жыл бұрын
those dark blue brackets are in a current production set for $4, the Para-Biddybud Mario ser 4 figure
@VORTEXtxagubvc2 жыл бұрын
Great video
@jamesarnold18092 жыл бұрын
Got this for Xmas. How'd you manage to get it to sit so flush together in truck mode? Any help would be greatly appreciated 👍🏻
@adnanalam83892 жыл бұрын
Anything to make the knees bendable?
@roadrash762 жыл бұрын
Thanks for the mod ideas. As for me, I bought two sets so I can display one of each without having to transform.
@fungboy39932 жыл бұрын
I would suggest to change the windows with identical shaped blue ones to give himma cartoon look
@waverider63022 жыл бұрын
My only problem with this set is the legs pop of easily which is making posing hard. Besides that it’s incredible
@DalleDC2 жыл бұрын
Thank you for the video. If you have a mail, I can send you some pics of how I modded my Optimus head only removeing the two 1x1 black pieces that holds the cheeks plates and adding one fairly common brick, not in the set.
@UrMomsChauffer2 жыл бұрын
I feel like set is based off the G1 toy more than anything, which didn't have much articulation, limited transformation, and kept most of the pieces you removed. Nice ideas though
@poykehmusic7 ай бұрын
5:47 I built that Optimus Prime by *I_AM_sketchbook* and it really is awesome. A bit fragile though.
@PrimehasthetouchАй бұрын
Man I was moving mine and the top of it fell off and broke all of it 😢 now I have to fix it every line gives me hope for my figure
@sogwatchman2 жыл бұрын
So the solutions used impede the transformation of the transformer robot? I know it's a novelty but isn't that the point of the character?
@YoshikiByankotsu2 жыл бұрын
question about the head. What if you turn the mouthplate upside-down and have the pointed part pointing the nose, rather than the chin?
@TheNewMichiganRepublic2 жыл бұрын
I never even ended up putting the 1x3 play on the fingers
@maximhoornaert77652 жыл бұрын
6:27 i have built this head and it does not hinder the transformation.
@Epitaph14562 жыл бұрын
i read the thumbnail as "5 SIMP MODS"
@arcanalpay58342 жыл бұрын
Did you already have a spare 2x3 plate (the one at 0:55) or you were using the part that came with the set?
@TommyCBricks2 жыл бұрын
I used an extra one however you can use the one by three plates together on the fingers that I take off in the next step :)
@buzzap21932 жыл бұрын
I just realized: just add the 2 1x3 plates that you got from the hands and put it as the first mod 😮😮😮😮😮
@S0n0fG0D Жыл бұрын
The only way these mods look good to anyone is if that person is blind or dead. Ain't no way in hell you think that looks better than the standard model.
@randomperson8304 Жыл бұрын
Bro you are not him
@marcusoliger36392 жыл бұрын
On the head issue, could you not just move that flat piece that's below his eyes to be above it? It would move the eyes lower, and still be functional in transformation. I don't have the set to test, but seems like it'd be easier than building a new head to just fix the eyes
@acurisur Жыл бұрын
No as there's only one point on the head to attach the eyes to, as I discovered when I tried to do what you suggested. The only way to fix the eyes is to do a completely different build.