5 TACOMA HIDDEN FEATURES...You Didn't Know Existed (3rd Gen Tacoma's)

[@wadegreen2036]

If you take the rear head rests out and fold down the back seats completely, there are 6 holes along the metal underportions of the seats you can stow the rods of the head rests into.

[@jamesflanagan3086]

Dude, you don't need the seat pulls. You showed how easy it is to pop the seat up. Lol!

[@astracke4940]

Hey Rob! Where can I find the hood struts

[@RobMotive]

Here ya go: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@robwho58]

Why are you yelling at me?

[@JasonVandenHeuvel]

😂😂😂😂😂😂😂

[@Eli-ek1es]

Start up and screen off image is one I just found out pretty cool for customization can load pictures onto your truck to see on start up and screen off mode

[@javis1873]

If for any reason your headlights remain on once you step off your truck (they should turn off when the engine is turned off and the door opened). Just press the lock button twice on your fob and lights will turn off.

[@RobMotive]

Thanks for the tip 👍

[@AboxofMonsters]

I was trying to figure out how my 2022 Seats open ! I thought they deleted the storage. Id rather have no loop this way if it’s broken into a theif will likely not be able to get under seats

[@Brian-kn8hz]

Is it possible to raise up the rearview mirror. I have to bend down to see even if I tilt the mirror all the way.

[@mostee77]

Good information thank you

[@RobMotive]

Thanks for watching 👍

[@dakotanorsk2045]

Also, when you lift the bench seats up and bring the back down. When the bench seats are pulled up you will notice two holes and this is where you can store the head rests in those two holes in the bench seats.

[@RobMotive]

Absolutely 👍

[@rgarciap7]

where can I find the hydraulic arm that you installed in the hood?

[@raydelfa1125]

What kind and where can I get those hood stuts? I got a 21 tacoma

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo&feature=shares

[@antoniopacheco2034]

When you fold the rear seats there’s two holes big holes that’s where you put the head rest in it. Instead of throwing them in the back. Also the gas cap you can attach it to the secure lock on the gas cap door.

[@genevandyke4088]

If your never going to use the hood rod again just put a tie wrap on it , if you remove it you’ll be looking for it when your hood struts fail

[@rogerbaldwin8498]

Back seat: you can fold the bottom of seat forward, remove head rest and the back seat will fold down flat for loading things in the back.

[@kathryngabriel3605]

Did you paint that cover under your hood orange? The lettering? Is there a video? Looks good! Thanks Rob- Kat

[@RobMotive]

Have a look: kzbin.info/www/bejne/qZeziqCVnLCMqs0

[@johnbailey1305]

You got me Rob! I thought, "What could you show me I didn't already know?". Lol. Then, you showed me things I didn't know. Haha.....

[@RobMotive]

Lol! There’s always something 👍👍

[@canadianbeefeater1672]

I took my back seat out of the truck, problems solved. I built a tray in its place and bolted it to the existing hinges so it can fold up to access the floor storage.

[@RobMotive]

Nice👍

[@scumbagNATE]

I’d like to see that, sounds like a interesting mod.

[@maxfathi596]

Goose gear makes rear seat delete panels with access doors to the floor and the floor bins. I’m making my own and spraying it with bedliner because 800$ is ridiculous. If you care about pure utility remove the plastic storage bins too because the plastic wastes a lot of the space.

[@MPGunther1]

Love these videos when I learn something new

[@RobMotive]

Did you learn something new?

[@DannyFyffe]

I knew none of these so I just learned a lot. I thank you for sharing this info.

[@RobMotive]

Awesome! Thanks for watching 👍

[@joerockme7485]

THANKS ROB I DID NOT KNOW THAT .

[@RobMotive]

Glad to help 👍

[@kdmour]

Didn't know about the seat belt pockets or the clip for the straps. Thanks

[@RobMotive]

Glad to help. Thanks for watching 👍

[@soccertl]

For the hood rod thing, you can also put a stick on rubber insulation piece, like the insulation around the door, under the rod around the middle so when it is down the insulation dampens the rattle. Nice list, thanks for sharing.

[@RobMotive]

Yup..good idea👍

[@mattcrandall5045]

For research purposes, that's weather stripping/gasket

[@retiredafce3373]

I got to do something about that hood rod. I want to find a under hood mat. I wonder who sells them?

[@mikes.4136]

Your Tacoma and Tundra channels are great! You offer great information and perspectives.

[@RobMotive]

Thanks Mike and thanks for watching 👍👍

[@ivanladouceur3566]

Rob...being 5'2" the hood is is heavy,, I TOOK UR ADVICE AND BOUGHT AND INSTALLED DRILLESS HOOD STRUTS,IT A MUST.. THE HOOD MUST WEIGHT 200LBS.. NOW IT LIKE A 2 FINGER TO LIFT AND LOWER IT. TKS IVAN ..MARKHAM ONT..

[@RobMotive]

Awesome 👍

[@ivanladouceur3566]

@RobMotive rob DOES MY 2019TOCOMA TRD.4X4DUEL CAB 3.5 LITRE.. EQUIPPED WITH P.T.C. ( HEATER ) PLS REPLY.TKS IVAN

[@RobMotive]

@ivanladouceur3566 Never heard of it.

[@ivanladouceur3566]

@@RobMotive IT'S CALLED A POSITIVE TEMPERTURE COEFFICENT. HEATER FOR 3RD GEN. 2019TOCOMA

[@RobMotive]

So do you have it?

[@ericshahnazarian57]

Yes figured them out except the struts for hood , thanks

[@Geared84]

My read seats on my gen 3 are always down, no head rests cause its just me n my son and he sits in the front. Thanks for the video Cheers from Canada.

[@RobMotive]

Awesome. Happy New Year 👍

[@Geared84]

@@RobMotive Happy new year to u too, Cheers.

[@Jagermonsta_]

I’m a year late but this video is great. I didn’t know any of those tips.

[@cre8tivegarage157]

Very interesting hidden Gems 💎

[@jramos7195]

The seatbelt buckle pockets blew me away, Thank you 🤘🤘🤘🤘🤘🤘🤘🤘🤘👏👏👏👏👏👏👏👏👏👏

[@RobMotive]

Lol! Glad to help👍

[@milantoombs6696]

Thanks for the tips👍🏻👍🏻

[@RobMotive]

Thanks for watching 👍

[@whoopsah]

can you add a link to the hood struts please?

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@28ashcat]

the seat belt holder at the begining of the video I didn't know about. thanks.

[@paulbennett5549]

Rob can you do a video on Seat/Headrest covers for front and back the Tacoma?

[@extrarounds3827]

Yea don’t remove that rod even if you had hood struts it’s not easy to put back unless you have something to hold up that heavy hood while putting it back in….and don’t get the no drill hood struts get redlines or spiker

[@michaelharing1475]

Thank you for all the info. Just bought a 2020 tacoma sport

[@RobMotive]

Congrats 👍

[@garyaaron8425]

Good one. I knew about all of them, but was pretty sure you were going to give us a tutorial on how to get a good night's sleep in the back seat after buying so many mods that one gets kicked out the house for buying. 🤪 Good video. Take care and hope you nd yours had a great xmas.

[@RobMotive]

Lol! What one doesn’t know will not hurt them…or me😬

[@garyaaron8425]

@@RobMotive Yes, Yes!!🤣 Mike from ORW, can even "doctor" you a receipt, if you will. Shhhh, that's my dirty secret....as is stuffing away cash and Amazon having delivery spots around town. Lastly, friends are so kind as to let me utilize their addresses. FYI, if I ever need to sleep in the backseat...Ill provide you with video. 🤣 Take care

[@RobMotive]

Lol! Now that’s advanced Tacoma mod buying on the sly😬

[@10in65]

Sleeping in a new Tacoma? Obtain a (foam) mat, cut or fold it to fit the new rear seat area. Remove the headrests from rear seats. Move the front seats forward. Pull the rear seats up/down. Place fitted mat atop the new area. Sleep with both legs slightly bent. Save some money. 😴

[@mattc5155]

Anyone notice the plug on the back side of the rear view mirror for installing a dash cam?

[@randallupton3622]

Never knew about those seatbelt pockets on my TRD-PRO. Would think I would have seen them in the leather but nope

[@RobMotive]

They are hidden pretty well back there. I didn’t notice at first myself😬

[@fedup2620]

I'd sure like to know what screw-less hood struts your using, if anyone knows please send me a message with a link thanks

[@MrLjarroyo]

What's a good front hood shock ?

[@RobMotive]

Redline Tuning.

[@GLockman4711]

Pretty cool thank you

[@walter8373]

Nice!! Thanks rob

[@speedsterspeedy2146]

Awesome video. Subscribed thanks big dawg Rob

[@RobMotive]

Thanks for the sub and thanks for watching 👍

[@genevandyke4088]

What are the other 2 holes for… the hole on either side of your screw hole , it looks like maybe for the head rests but my headrest didn’t fit in there

[@richardfernandez8479]

Wow Rob, we learn something new everyday. Thanks for sharing these hidden items on the Tacomas.

[@RobMotive]

Thanks for watching Richard👍

[@Delfy-xk3ws]

Going to need to buy a bungie strap. Thanks for the tip

[@prepareandprotect]

I remove the headrests and store them so I do not have to hear them flopping up and down. I can see where if left in that position they may end up breaking from the bouncing.

[@RobMotive]

You must travel some really bumpy roads😬

[@dennismacwilliams196]

Good Video Thank's

[@RobMotive]

Thanks and thanks for watching 👍

[@georgeglanville7422]

Want to know more about those no drill struts for the hood for a tacoma.

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@gordonhedgepeth8764]

You missed the storage spot for the headrest. There's two holes next to the screw that you want to add the orange pull handle. That the headrest slides into

[@RobMotive]

Yup…great place to keep them👍

[@MrMikey1273]

Hmmm... I was looking at the hood prop rod today thinking I should get rid of it but then part of me wants to keep in in case to struts fail. But I'm so particular I'd replace them if they started to get weak. So I'm going to put mine in the basement with the rest of the stuff I pulled off or replaced.

[@RobMotive]

I can relate👍👍

[@mikeyID]

Howdy Rob. Good video. Hope you and your family are enjoying the holidays

[@RobMotive]

Thanks Mike. We did👍. Hope you did too👍👍

[@patty9386]

The top head pad fits in the back of the bottom of the back seat too

[@lc7192]

Nice! Thanks!!

[@theophrateswhite8899]

Did you know about the c charger and the USB port on the back wall of the center counsol ?

[@RobMotive]

Yup👍

[@rcafmaintainer3723]

what size screw for the pull? thanks

[@RobMotive]

Have a look: kzbin.info/www/bejne/p5rXko2sbaqNjtU

[@chrisguapo69]

I just applied some tennis racket grip wrap and not worry about storing the hood stand anywhere else other than where it is supposed to be.

[@RobMotive]

Nice idea👍

[@dannycobb1]

Please send me a link for the shocks for the hood

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@bennyhill3642]

Does the middle head rest come out also? Gr8 vid Thank You!!😇

[@RobMotive]

It does👍

[@hirammendez6748]

Looking for chevy Colorado features that I dont know about.

[@RobMotive]

Wrong channel.

[@gunnerolson4725]

Thanks for the tips.

[@RobMotive]

Thanks for watching 👍

[@henrymorton7669]

Thanks 3 I didn't know

[@MrMikey1273]

I'd like to see what you do to put in the pull tabs on the back seats. Specifically what screw size are hardware to get.

[@RobMotive]

Stay tuned.

[@jondrake8855]

Not sure if this has been said but the leather seats on the pro came with a pull tab on the bench seats.

[@RobMotive]

Good to know 😡

[@gfue2517]

Why is there power cable going to the T on t grill seems like it should light the T emblem up

[@RobMotive]

Not sure what you mean🤔🤔

[@useryggfdcc]

Any idea how to select all lights off when the engine is running after driver entered the vehicle?

[@RobMotive]

Are you referring to running lights?

[@useryggfdcc]

@@RobMotive yes. All lights off when running the engine at night.

[@RobMotive]

Only way I’d know is to disconnect it or pull the fuse🤔

[@useryggfdcc]

@@RobMotive On older vehicles we use to pull the handbrake level to kill the lights at night.

[@rye6864]

Do you happen to know what is the metric Size of the bolt for the seat pull? Thanks

[@RobMotive]

I do. Stay tuned. I have a video coming👍

[@3Dee3Dee]

Fabulous learned so much ❤️👍

[@RobMotive]

Thanks for watching 👍

[@rickking823]

Thanks rob I installed those hood strats and I've been Wanting to get rid of that hood prop for quite a alone now I'm gonna go do that

[@RobMotive]

Nice! Glad to help👍

[@Malingkat5949]

Hi do you have the link where To Buy that type of hood struts?

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@zook909]

The no drill hood has cylinders sound awesome. I was worried about drilling the hood and riveting it. I tried the link but it isn't working

[@RobMotive]

Definitely a much better option than drilling IMO👍

[@maryseifert4750]

Hey thanks for the info....just got my new 2021 Tacoma 2 months ago...have lots to learn. Just came across your channel...subscribed and like it.👍👍

[@RobMotive]

Hello Mary. Congrats on the new truck and thanks for the sub👍

[@Malingkat5949]

Hi Rob, do you have the link where To Buy those kind of hood struts?

[@RobMotive]

Have a look: kzbin.info/www/bejne/sHLPd3qBYspnmZo

[@Malingkat5949]

Thanks. But unfortunately that kind of struts is Not currently available.

[@RobMotive]

Bummer😬

[@Malingkat5949]

I have a question about Your Other video On sprint booster. Do you still use it? I mean if you still use it, How long have you been using it? Is There any Issues? Because I read about pedal Commander Has some issues. IM choosing which One To Buy.

[@mikeylikesit7318]

I prefer the Redline struts. Those you have extend toward the front more than I'd like. Also you used the ground location to mount the driver side, I prefer not to.

[@RobMotive]

Sounds good. Always go with what you like👍

[@IHcubcadet]

Interesting, my 2018 has pull straps for the rear seats. Maybe a trd thing?

[@RobMotive]

Nope…they were removed beginning with the 2019’s😡

[@IHcubcadet]

@@RobMotive ok. I missed that part. 👍

[@julien2912]

Hi. I found your channel by doing a search for how to get my front seats to recline all the way back in my 2016 toyota tacoma. I have never liked the fact that they don't recline all the way down flat. Do you know if there is a mod that can be done to make this happen? More specifically on the passenger side. I want to do some car camping in my truck and need to make a bed out of it by making it recline flat.

[@RobMotive]

I don’t know of one off-hand, but I’m sure it’s possible 🤔

[@Emmasecoff]

nice one rob

[@RobMotive]

Thanks👍

[@elejaces]

Love the hood rod removal - I added struts based on one of your videos- so I was hoping I could get rid of the rod! The catches for the rear seatbelts are great too! I am always looking for ways to eliminate annoying noises!

[@RobMotive]

Absolutely 👍

[@jlj209]

Did not know about the seat belt buckle pockets. I’ll check it out in the morning. The no drill gas struts I’m going to look into now too.

[@RobMotive]

Awesome 👍

[@StephenS-w8d]

Awesome

[@ahkeen]

Here’s another tip: For those with the v6 engine there is an electric heater in the Tacoma. When the temps drop below 45 if you have the heat at max, you don’t have to wait for the engine to warm up to get hot air blasting.

[@RobMotive]

Hmm….🤔

[@ktkyle41]

How does it work

[@ahkeen]

@@ktkyle41 Service manual calls it the "quick heater" or "PTC heater"; located behind dash on passenger side. -Engine running -Blower switch on -Temperature settings: MAX HOT -Engine coolant temperature 65°C or lower -Ambient temperature 10°C or lower Instant heat.

[@jxd9389]

@@ahkeen No wonder my heater was always on blast (highest fan speed) whenever I would remote start it. I have found the answer, thank you!

[@ivanladouceur3566]

DOES MY 2019TOCOMA TRD 4X4SPORT HAVE THIS FEATURE PLS REPLY TKS

[@edweir1530]

Hi Rob ,what size fastener for the seat pull?

[@mikeylikesit7318]

I just purchase a pair of oem at the dealer the straps come with the screws, a pair for less than 15.00.

[@RobMotive]

Nice. Do you have a part number🤔

[@garydp9760]

@@mikeylikesit7318 Good to know. When I get rid of my 2018, I think I'll just keep mine for next truck.

[@mikeylikesit7318]

@@RobMotive No, just go to parts and ask for the pull straps for the 2019 tacoma, if you use your current model year they won't find any.

[@mikeashely8198]

Well when it stop snowing here I'm going to check it out

[@Brian-kn8hz]

My Remote Start stop working on my 2021 Toyota Tacoma. Any suggestions on how to fix it

[@RobMotive]

Did your subscription run out?

[@michaelwilkinson5127]

Could you order from the dealer the back seat pull tab for an earlier year Tacoma ?

[@RobMotive]

You can….but shipping costs will cost you more than the parts. Just ordered some stuff to make my own👍

[@Chris_Kwon_Do]

Are you going to do the ac tube to protect the frame from rust. Would love an update video

[@RobMotive]

Yup, coming soon👍

[@hoolitunes]

You didn't go far enough with the back seat headrests!

[@markwilcox8566]

Darn, I didn't know about the pockets, forgot about the clips for the belts. Made sure mine are being used. Do you have any remedy for the drivers shoulder belt height adjuster? Sometimes it will rattle right in your ear drum. Annoying! Thanks Rob!

[@RobMotive]

Hmmmm…I don’t have a rattle🤔

[@frankdigristina5859]

Hi Rob, you taught me 2 things out of the 5, how I have to run out to the truck and fix things. Thanks!

[@RobMotive]

Lol! Glad to help 😁😁

[@C.Lopez-SWFL-Off-Road-Trucks]

Nice video

[@RobMotive]

Thanks for watching 👍

[@C.Lopez-SWFL-Off-Road-Trucks]

@@RobMotive always 👍👍

[@cs1992]

Great Channel...just dicovered it. Question: What's your opinion of the Tacoma's front seat (position/comfort). I've hear mixed things about the seats.

[@RobMotive]

Thanks CS👍. Depends on your year. Prior to 2020 the angle is bad. With the power seat it’s much better👍

[@cpsmonroe1]

Im 6’ . I have no issues on my 2021 with power seat.

[@bobtolford3001]

I had a 2013 and and currently, a 2019 Tacoma. I found the front seats in both to be about the most comfortable seat of any vehicle I have ever driven. I've done several 3 week + road trips out West and never did my 65 year-old back get sore.

[@david4903]

Another one is when you fold the bottom seat up there's holes for the head rest to go into

[@RobMotive]

Absolutely 👍

[@roadeomagic]

Rob, not sure if this was said in any of the previous comments but, in regards to the hood rod, you could've also used a plastic tie rap to secure it. Then you don't have to worry about trying to secure it somewhere else😉

[@RobMotive]

Nice tip👍

[@ryanarendt8927]

Rob, you need to get the yellow bungies because you may have a problem telling them apart; yours are not blue.... lol

[@RobMotive]

Lol! I may😬

[@Stackali]

why do you need a seat pull? it just lifts up. no need for a pull.

[@RobMotive]

Have a look at the video about it. Everything is explained there👍

[@richardshoat8711]

Wow

[@debrahoover1888]

How about in a 2004 Tacoma?

[@FunFam0323]

Here’s a feature I bet you didn’t know your Tacoma has. I own a 2017 Toyota Tacoma. I constantly have my lights on but my 2017 sport does not feature auto headlight functions. So one day my boss says your headlights are on. As I’m waking towards him I said I know I’m not in my house yet and he goes what!?!? Then he said oh! They turned off. I said yeah it’s a feature to allow you to walk to your house a path of light to the door or what have you. I saw someone comment that if you hit the lock button twice it will turn off the lights not necessary. Go into your settings and you can turn on light off after…. And select how long you want them to stay on. They only implemented the auto lights function because people didn’t know this 😀

[@RobMotive]

Yup…I’m aware👍👍

[@bradgt5130]

Toyota really cheaped out and didn’t put the rear seat strap on the base model?

[@RobMotive]

My 2020 TRD off-road did not have the seat pull straps either.

[@cpsmonroe1]

A ‘20 Limited I test drove didn’t have one , my ‘21 Sport doesn’t either.

[@RobMotive]

Nope! They are gone😬