5 Things You Can Make from Glass Bottles

[@chaplainand1]

I like it. Thank you. I have about two dozen bottles on which to practice. May the Creator of All continue to bless and watch over you and yours.

[@macbirt56]

You make the glass cutting look so easy. I know for a fact that it is anything but. I would say, even using your method, which is one of the best I have used, that only 1 out of 10 bottles cuts anywhere near that cleanly.

[@susannespence2924]

Thank you for this video. I teach English as an Additional Language (EAL) to adult learners and, recently, the students brainstormed different ways to use a glass jar. One student showed, on her phone, how bottles can be made into candle holders. I think the design was simpler than yours. The bottom of the bottle was removed. The candle was placed on the table and the bottle put over it. However, your video is great. I will show it to my students. Personally, I am very keen to recycle things. I keep coloured bottles and used them for mini vases. I think I will try making your candle holders. Keep up the good work. Thanks.

[@jessicalin3396]

The vase and candle holder is the best ones !!!

[@ShakeTheFuture]

+Jessica Lin Thank You!

[@johndistefano6524]

Jessica Lin you're the best to Jessica don't forget it

[@sofiarasmussen9188]

I just bump in to this vídeo. Sooo mutch clean cuts than the others tecniques I have seen. Thanks for shearing. Im from Argentina, sorry for my Inglish

[@sharybaluyot6220]

I am amaze how the methods are being given on the video. The bottle cutter is very amazing! It gives me Idea on what are the things that I can use the bottles esp the ashtray since I smoke. It is amaze me a lot!

[@belkisbakko2643]

التبغ قد يقتلك ..........لاتنسى هذا

[@5tattoo69]

Dude the egg cups are brilliant. Thanks for the video Is niice. I like

[@SarathKumarTM]

OMG... the candle holder was a super cool idea...

[@ShakeTheFuture]

+Sarath Kumar T.M. Thank You!

[@gilboston20033]

You are making for a fun, I used to make for necessity, back 60 years ago, I couldn't afford to buy where I grew up.

[@danydabs024]

My fav is the astray, it's exactly what I was looking for 👌

[@ShakeTheFuture]

Angel Haze Thank You for taking time to leave a comment. Ashtray is also one of my favourites. Cheers

[@anthonyromainjr4829]

That's a nice joint you rolled

[@kololikate]

I am hoping to start a small project in the Gambia using this technique and a few ideas to use the cut bottles

[@joshuaornelas]

Hi, So nice to see your videos, when I was a teen I teached some crafts at NGO Arco-Iris, here at Brazil, was a NGO created by catholic sister to help poor people to make money and take the childrens out from street. My city that time was (unhappily) very knew by youth prostitution. Was a nice work that we did. I grow up , came to the capital and never more did it again, now seeing your videos remembered that times, so good memories, I will to try to do this crafts at my home. Thank you for your nice video, I hope that this help to save the earth. Josué Ornelas

[@ShakeTheFuture]

+Joshua Ornelas Thank You for sharing your story.

[@sadiasshades]

Love the candle jar

[@ScrapwoodCity]

Cool projects, I loved the astray and the tealight holder! What drill bit did you use for the glass drilling! Thanks for sharing!

[@ShakeTheFuture]

Scrap wood City Thanks I used ceramic/tile/glass drill bit. goo.gl/q03le9 It looks like a tip of an arrow. It was super cheap, but it does the job. I drilled a smaller hole first, then changed the drill bit to a bigger size. I want to try Diamond Holesaw drill bit and see how it performs.

[@ScrapwoodCity]

Thanks!

[@parikhspiecederesistance3958]

A very well made & useful video 👍🏻 A big thumbs up coming ur way 👍🏻 🙏🏻 Mumbai India 🇮🇳

[@apismellifera1000]

Another thing you can make is a wind chime with bottles. I got my mom a bottle cutter for Christmas and will be doing that stuff too

[@irfanansari3192]

Great ideas, I like the candle stand much more

[@ShakeTheFuture]

Cheers!

[@lass-inangeles7564]

Amazing! So creative, thank you!!

[@ShakeTheFuture]

+Lass-in Angeles Thanks!

[@uchysudjono6113]

Genius! VERY GENIUS!!!

[@ShakeTheFuture]

+uchy sudjono Thank You!

[@deepasureshdumblekar6792]

Very well explained. Does the scoring and candle-n-ice method work for all types of bottles? Does the bottle not break while drilling the hole? Is only keeping it underneath the water enough to prevent that?

[@amethyst1826]

Wow, I love the candle holder.

[@sherierodrigues1569]

Oh Denny, love your video. I am happy I found your channel. Thanks for sharing your art. Sherie Rodrigues from Australia. 😃

[@noramardesi2566]

bagus sekali karyanya sangat sederhana dan inspiratif.(Indonesia language)

[@rasedhabibulla8775]

wow.Nice video . I am so happy.

[@bellasmom2597]

Boiling water works better than flame

[@rosae1967rg]

Ohhh!! me encanta 💖

[@isanur2]

Nice

[@jbrondos]

How long does it take you to polish the edge of the wine bottle cup (and do your arms get tired)? What kind of polish powder do you use -- and where can one get it?

[@drishtibajaj2385]

man you've just got a new subscriber . . . love it

[@julieblack8173]

love em !!!

[@ShakeTheFuture]

+Julie Black Cheers!

[@LABARONESADEYANBU]

All of them are great!!

[@ShakeTheFuture]

Thank You!

[@HappyIdeasVlogs]

Very Nice 😊

[@gayleholland6612]

AWESOME N SIMPLE! Thnx for sharing!

[@ShakeTheFuture]

+Gayle Holland Thank You!

[@djebat88]

Really cool ideas. Thanks.

[@santiagocalzadillo4701]

Disculpe maestro de arte, no hablamos el mismo idioma pero me gusta🖒sus ideas. por favor ¿como hacer un marcado de botella como ese que usa? Pase feliz noche..😊

[@nataliewoodley4190]

cool I like the vase best one

[@Lanshp]

Very creative i like this

[@archangel20031]

The only thing that sucks about this video is a lack of a link to where he made the bottle scoring tool.

[@lizbethcarrillo4362]

gracias por hacerlos en español.,me encantaron tus trabajos.

[@creativetoysreviews2275]

So original ideas great video!

[@ShakeTheFuture]

Thank You!

[@BadKittyNoMilk]

Great video thank you for sharing

[@kyrakiele9540]

I'm so glad that I found this site! Thanks for the inspiration !! It's just what I needed to hind end going again! Thanks!!!! :)

[@ShakeTheFuture]

+Kyra Kiele Thank You!

[@rahulraosuryaneni5998]

I made candle holder’s as per your guidance .. but the bottle broke with in a minute after lighting the candle .. I spent almost 2 days on it.. and made a cut on my finger also.. Final Output is flop

[@SONGSTICKS]

Hi, The gizmo you use for scoring the bottle with, is that homemade or a bought product? also.. the point used for the scoring, is that a diamond tipped point? I want to have a go at making a glass didgeridoo using recycled glass containers. Once turned into tubes, I want to join them together, hopefully by fusing them with a blow torch. Can offer any tips about glass welding in this way please?

[@ShakeTheFuture]

Hi! It's the Ephrem's Bottle cutter - link in the description. I don't think the cutting wheel is diamond, but I am not 100% sure. Fusing the glass with the blowtorch is not that easy. Glass tubes will crack before they start to melt. You will need to put those tubes in a kiln to heat them up (to avoid thermal shock) Then you can use the blowtorch to melt the glass in the spots you want. Maybe there are other ways to do it, but that's the only method I can think of. Ps. Ask somebody who does glass melting. There might be a better way to do it. Cheers!

[@СветланаДариенко-п9з]

Отлично. Благодарю 😘

[@mirnaargeliamenasosa4207]

Gracias por tener el vídeo en español ya q soy mexicana graciaa en verdad gracias

[@mixme8655]

thank you very helpful ..please tell me what is that tool to mark sa bottle before cutting is that a diamond cutter?

[@ShakeTheFuture]

+Bernard Chu It's a bottle cutter. Search for a bottle cutter on Amazon or eBay and you'll find many choices. (brands) Here is the one I used: amzn.to/1ORrvoj

[@mixme8655]

ok thank you very much

[@rukhmanikumar5659]

Y

[@saartigirl]

wow candle holder geniusssss

[@arlynlarsson5544]

love it now i know how to cut bottle in an expesive way and how it can bring beauty in my home

[@shrutisgupta]

Hi. Please suggest the way to cut the bottle which is not circular. I need to cut out one of the faces of the bottle to make it into a planter.

[@CibaoJo]

I love this. How do you make jig to score the bottles?

[@ShakeTheFuture]

The one I used I did not make, it was bought. I made this one: kzbin.info/www/bejne/Y5y2h5qweMygpc0

[@diymodern4840]

Hi. bro . Please look my video

[@ultimatenix8893]

so creative I would have never thought of this thank you so much ❤

[@ShakeTheFuture]

Thank You!

[@saiedkhosropour5024]

@@ShakeTheFuture یق طبق

[@marceaton3128]

Thanks for the video, I have a crap load of wine bottle to cut. Your voice reminds of Christopher Walkins the actor.

[@ShakeTheFuture]

+Marc Eaton Thank You Marc!

[@JosephDeLosSantos-t3m]

I noticed too!

[@SpeakerGregScott]

This is great. Thanks! Where did you find the bottle scoring device that you use in your video?

[@ShakeTheFuture]

Greg Scott It's Ephrems bottle cutter. Cheers

[@santiagocalzadillo4701]

Muy buenas sus ideas para cotar botellas, lo que me gustaria saber como hacer esa clase de rayador que usa ¿ como hacer un rayador?

[@twenty-five.25]

Nice one How can we score the bottle at home Can't find one like yours

[@arjuntejavath6099]

hi, i have tried many times but i couldn't cut it smoothly, its always wavy. any tricks do you suggest

[@normacastillo8001]

Interesting. I 'll try to do it. Thanks.

[@hopeh6176]

Awesome! !!!!!!

[@MrEdgarCaraballo]

Just great Thank you

[@ritchi841]

What drill bits do you use? Or can I use normal drill bits? Because I want to make an ashtray.

[@ShakeTheFuture]

+Ritchi One of the best drill bits fort he job are diamond coated drill bits. You can find a link in the video description. Cheers!

[@ritchi841]

***** thanks ;)

[@josejimenez3371]

this man is very creative i love watching these

[@rockdog2584]

I need to build myself one of those glass cutter units...or are those available commercially?

[@ShakeTheFuture]

There are plenty. Just search for a "bottle cutter" in eBay and you'll find some.

[@priyabasfor157]

Too good sir

[@CrownofElegance]

pretty cool. Great job!

[@doraligiasanchez3399]

Crown of Elegance my

[@Gbz8]

Nice ideas man.Just one question.How did you drilled the bottle?What did you used?

[@ShakeTheFuture]

+Georgian Sare-Alba I have a video about drilling the glass bottles: kzbin.info/www/bejne/d3vanqxsipeEhck Cheers!

[@Gbz8]

Thank you!

[@wrenbirdie8312]

number 2 is really pretty

[@organicdiva2859]

love this please can you rate the tools , i looked it up on amazon. but there a lot of them, thanks

[@Slothlodge]

Gru? Is that you?

[@katieb8346]

Omg yasssss 😂😂😂

[@keepyourshoesathedoor]

Chill.

[@jubondave]

Hahaha... I came across this video and was about to say the same thing... Lol Gru.... Haha

[@benjacoolen]

Yeah it does really sound like him doesn’t it 😂 lol

[@bobthebuilder27873]

Jesper Sloth omg it is!

[@roberto.dcuellar.s5783]

I like the way you separate the two pieces with ice.

[@ShakeTheFuture]

+Roberto. D Cuellar.S Cheers!

[@AllAboutEbola]

what did you use for the edge ? whats that podre ? where i can find it ? or what i can use instead of it ... ''sorry i'm not native english speaker i wish u understand my qeustions"

[@ShakeTheFuture]

La Corniche TV HD It's silicon carbide. Look for it in ebay. Cheers

[@royreynolds108]

***** grinding compound. different grits.

[@newmanpenny]

LOVE LOVE LOVE! Thanks so much for valuable info!

[@ShakeTheFuture]

Penny Cuff You're Welcome!

[@LazyGamingFTW]

Gru Just gave me a lot of ways to make cool cups an shit. thanks Gru

[@zuneid375]

very creative

[@LittleJoy666]

I'm laughing so hard because his accent remembers me about the italian that went to malta video , lol xD

[@AdvocateMoksh]

Thanks😍

[@miguelinamarteastrotarot]

Cool!!

[@ShakeTheFuture]

+miguelina marte mateo Cheers!

[@naveengoudettaboyini6451]

Score, how to do it? what is the thing that your using to score it sir

[@pdelmercado]

Very nice.

[@MustaffaCuppa]

Nice ideas. Gave you a thumbs up & subscribed. Where did you get that neat bottle cutter from? Or did you make that too?? ;-)

[@ShakeTheFuture]

Thank You! You can find a link to the bottle cutter in the video description. Cheers!

[@goofball1969]

Fantastic!!

[@khaliqabdul4192]

Amazing.... I like this.. The best

[@hopedean6424]

I wish I could like this video ten times

[@ShakeTheFuture]

+hope dean Cheers!

[@SuHaz-x2z]

wow..!!! awesome dude..!! thanks

[@ShakeTheFuture]

+LadyIn Black Cheers!

[@arckocsog253]

Awesome!

[@ShakeTheFuture]

Arc Kocsog I am glad you liked it. Cheers

[@mickimouse2292]

Hola cón que marcas los cristales, como se hace ese aparato para marcar??

[@SG-es2rz]

omg...u r a genius

[@ShakeTheFuture]

Thank You!

[@NMedinaBaeza]

What tool are you using to mark the line on the bottle?

[@ericanavarro9573]

Hi, what type of sand paper and buffing do you use? thx

[@ShakeTheFuture]

+Erica Garcia I used an ordinary sandpaper. For the big sanding, I used silicone carbide powder.

[@SPinterest]

Shake the Future hey what grit number did you use to sand them?

[@atulyasharma]

What is the item name which u are keeping the bottle first and rotating pls?

[@MrSalmonOrange]

Wow that cool

[@aleksnedovic7985]

what kind of drill can one use to make holes in a glass bottle? thanks!

[@09lacky]

Fantastico!

[@gracamaria.5316]

Rafael vc sabe me dizer onde fica o diamante que corta o vidro? Vou tentar fazer um pra mim.Agradecida.

[@fernandorizo2245]

Exelentes conocimientos

[@aquilanera7039]

Great, man!

[@sathyas803]

Amazing... Thanks for the awesome ideas...

[@ShakeTheFuture]

sathya s Thank You!

[@deredentepedengel]

awesome!

[@ShakeTheFuture]

+Gokhan Gul Thank You!

[@christiangaier2897]

Hi. Thanks for this vid. Where do you buy your glass-cutter? Kind regards

[@ShakeTheFuture]

Christian Gaier ephremsbottlecutter.com Cheers

[@sebbepersson6819]

***** lol

[@wahidiyahsyam6823]

great, can you tell me what name black powder that you used ? thank you.

[@ShakeTheFuture]

Wahidiyah Syam It's silicon carbide. Look for it in ebay. Cheers

[@wahidiyahsyam6823]

thank u, cheers :)