500 TON HYDRAULIC PRESS VS SLEDGEHAMMERS

With the help of a 500-ton hydraulic press, we will check what kind of load a sledgehammer cooled in liquid nitrogen and red-hot will withstand.

[@Armeanu91]

Thanks for warning me. I was just about to whip out my 500 ton hydraulic press and liquid nitrogen. This saved me a trip to my closet.

[@PussyGaming67]

Imagine someone walked in the shop with a sledgehammer looking like this and asked for a refund

[@a_piece_of_paper8400]

Lol

Sledgehammer: ooh I'm finally done and someone will buy me and use it for years. **Burned at 800 degrees and crushed by 500 tons**

[@bobbyblazini]

Sledgehammer, what is your profession?!!!

[@Oleksandr_1999]

Така в неї доля - померти в ім'я науки.

[@bhavikgoyal6843]

@@Oleksandr_1999 translation helps me understand your commen5

[@dupertuber8442]

@@bobbyblazini Dying. Dying is my profession

[@bhavikgoyal6843]

@Technology 40 what?

[@bournelucid]

The energy release after the hammer broke is insane

[@emileponcelet3439]

Yeah its action reaction, just bexause u dont see anything happen doesnt mean there is no energy. The hammer absorbs every continuous energy until it reaches its stress point. The hammer cannot transfer the energy anymore and the energy gets transfered towards the whole hydraulic press thing

[@TOMMY-xc6ou]

Spirits!! 😳

[@saldiven2009]

For me, the coolest part is the sparks flying off of the shattering frozen hammer.

[@Metal_Master_YT]

the temperature change those sparks experienced is crazy...

[@gregjones3660]

Well as they say in Russia Blyat!!!

[@RayTracingX]

@@gregjones3660 да!! Абсолютно с тобой согласен. НО: ваше СМИ всё врёт насчёт украины

[@webentwicklungmitrobinspan6935]

for me the coolest part is the liquid nitrogen

[@serious4702]

Naturally

[@phonotical]

Send the fragments back to whoever made it and say, it broke in impact, then they have to work out how you swung a hammer with over 300 tonnes of force

[@antetal9348]

"Tonne" is a measurement of mass, not force. Force is measured in Newtons (N). If it was 300 tonnes (which I'm pretty sure it wasn't, as Mpa isn't equal to tonne). 300 tonne = 300, 000 kg F = M × g (The force being referred to is equivalent to weight, due to gravity). It would be a force of ~ 3,000,000 N.

[@phonotical]

@@antetal9348 yeah, but the video isn't called 500,000kg hydraulic press...

[@alexanderludvigsen1893]

@@antetal9348 we all understand 300 tonnes of force tho. Its not exact im any way or useful. We just understand its a fucking lot

[@MichaelLaferriere]

Thor could do it.

[@redacted6169]

@@antetal9348 holy crap I almost gave a fuck!

[@kjentytek3035]

"dont repeat it at home" yea, everyone have hydraulic press at home

[@fatihmutlu4898]

😂😂😂😂

[@jdkittyssquad5533]

You don't?

[@user-pn3zt4jk9n]

Yep, in Russia in every home...

[@ElAsombrosoPachus]

Don't you?

[@cheesewallace5494]

*puts away hydraulic press sadly*

[@atyacharigamer9784]

0:53 my volume was full 😭

[@u.s.militia7682]

I’m totally amazed that hydraulic hoses can withstand so much pressure.

[@XB10001]

The sledgehammers never had a chance! Long live the hydraulic press!

[@Avin868]

0:08 -: Hammer press with 20⁰C 2:13 -: Hammer cooled in liquid nitrogen 2:46 -: Hammer press with -196⁰C 5:09 -: Hammer heated to 800⁰C 5:16 -: Hammer press with 800⁰C 7:16 -: Result

[@arindamnath6577]

It's really amazing to see when a fraction of the massive force of the hydrolic press is released in the surrounding...and the flattened hammer looks reminds me of a regular cheese burger....

[@SecretlySeven]

Lets not ignore how good of a hammer that is.

[@u6uggg6hguiuggy]

It Is A hAmMeR.

[@MrEVAQ]

but it broke bro i wouldn't buy it

[@alejandrohernandez2607]

Yeah that's probably the most durable hammer I have ever seen

[@vrederik_rblx]

@@MrEVAQ everything breaks under it and it did stay long alive under there

[@MrEVAQ]

@@vrederik_rblx but it still broke

[@hechter80]

Unexpected @0:52I thought the press and the entire world was broken 😅

[@Patg2644]

Love the Terminator’esk music lol. You guys are awesome I wish I could do stuff like this for a living

[@Blu010]

i think the cold hammer is the most brutal home/basement destruction

[@cliffinkaemurd1320]

The acceleration of the upper part to the lower part is insane

[@asthenor1583]

Unexpected result👍 Basically I thought the heat one is more softer it was but at last movement.

[@exorusmothic7790]

Disclaimer: Do not repeat shown in this video Me: Yeah like we can afford hydrolic press

[@labswee7635]

I like how its playing this upbeat music as if the sledgehammer did not almost just end his life in that moment

[@bigbosspanda1976]

Guy: I'm going to leave my sledgehammer here and tear down my hydraulic press with it later Hydraulic press: *no*

[@anthonyserna6151]

Lol :)

[@bobbyblazini]

Wanna play a game? You have 2 minutes to escape the room before the sledgehammer is launched in all directions

[@HunterTheDiseaseRat]

Lol

[@Am_Cookie2436]

Those sledgehammers exploded like frag grenades

[@gaiuscladiusglaber9805]

Yes it is

[@siarametanal4317]

These videos are so satisfying

[@ulkona-enjoytheoutdoors5305]

„Do not repeat at home!“ Wait, I‘m just looking for my kitchen hydraulic press… 😂

[@JordanBeagle]

1:15 Dammn, that was impressive sparks even and lifted that huge stack of weights like it was nothing

[@BOB-xz5eg]

it was crazy how that peice of metal went inside the boot

[@jesusnavarro7268]

Super cool.thanks for your time

[@nieznajomym719]

1:00 Mjolnir from Thor Ragnarok

[@baery4552]

Thor hammer:-Should I leave the job😂🤣

[@gaiuscladiusglaber9805]

,lol

[@HasteRaho2009]

0:54 literally scared out of wits.

[@ACS_CORP.171]

My eyes:😱

[@ivan-Croatian]

That music at the end reminds me on Terminator and also when Terminator gets crushed under the hydraulic press. 😁

[@YouPousti]

I was thinking the same thing haha I knew it sounded familiar

[@beddozo]

You might want to get some 1/4 inch steal sheets around your safety structure and maybe some thicker laminated glass . You're Crazy !

[@manuariimarian7874]

Remember kids to always be safe, particularly when you crush things

[@Stoneman39488]

Especially*

[@AdityaKantKushwaha]

Kids have these machines at home

[@maplex123]

Especially your dreams

[@sl-234]

@@Stoneman39488 ج

[@mikxy.s.4553]

@@AdityaKantKushwaha actually we do. 😂

[@hernanedias554]

Why is this so satisfactory??

[@jamielarett2044]

my new favorite channel

[@nestorgraciano3316]

Here we have a clear example why this don't be make in home Even with protection can be letal

[@Beos_Valrah]

*lethal

[@UXTROM]

This work is very Dangerous 🔥

[@tesla_davidplayz6776]

Ye because the chunks can hit you

[@overtheatlas]

@@tesla_davidplayz6776 those chunks will literally kill you. If they hit your legs they'd shatter them

[@definetlymash]

THE FRIST ONE JUST BROKE THIS OHLY

[@relivenia]

HOLY FUDGE THAT SCARED ME TO THE EDGE OF MY CHAIR 0:53

[@SergoEnergo42]

Товарищи, спокойно, я так понял, что это второй англоязычный канал нашего всем знакомого человека

[@LuckyGamer5563]

Ага

[@asadullahkhan1004]

Then which is first?

[@sovridder7429]

Распред шкаф на стене точно наш.:)

[@artyx3195]

Если бы, может видосики канал тырит?

[@LuckyGamer5563]

@@artyx3195 да не

[@thomasschoon8407]

I think it might be a good idea if he lined the 'test chamber' with that AR 500 steel, and have a smaller viewing window.

[@TheRockeyAllen]

What is the sledgehammer made of? Steel? And if so, any idea which grade?

[@patrickharding4831]

The Terminator reference earned you a 👍

[@velmanoharvel9743]

Everyone's feels for the sledgehammer, but I am proud of hydraulic press machine.

[@RekhaSingh-qx6rd]

I am thinking how many camera he has lost during this video 🤣

[@V0V50]

0

[@gabriell314]

Nenhuma não kk

[@jamesh950]

Love the disclaimer, don 't try this at home....I sure would if I only have a 500 ton press in the garage or basement. One challenge, crush the plates on the press. How many tons require and what type of plate can crush the yellow and black stripes plates.

[@shifterchanel4925]

Someone has ~14000$ to build a press, so that disclaimer isn't useless

[@M33pachu]

@@shifterchanel4925 The disclaimer can still be useless if they just don't follow it

[@laauxx4689]

@@M33pachu it makes sense

[@scottbilger9294]

Don't try this at home. These people shouldn't be doing it either.

[@M33pachu]

@@scottbilger9294 well now I'm gonna try it at home good fucking job

[@gustavosantos6118]

Hella liked this video.

[@UTKU-cd4cz]

nice jumpscare video thanks

[@poluefemus]

surprisingly the molten one wasnt that scary

[@hazmat5749]

At roughly 600 degrees steel looses most of its strength; thats why steel framed buildings have to have extensive fireproofing to protect the structure

[@Chocolatnave123]

Interesting how jet fuel can't melt steel beams

[@Elrog3]

@@Chocolatnave123 What makes that interesting? For a building, you don't need to melt the structure to make the building fall. You only need to weaken it. Is there any situation in which steel is intentionally used in conjunction with jet fuel? Jet turbines are made with titanium alloys.

[@Boss_Tanaka]

Bin Laden is aware of that

[@happydada1993]

When an unbreakable object meets an unstoppable force

[@peter-xv8um]

Wow very interesting experiment.

[@garro2722]

Hello from crazy Russian experiments

[@avengersfanclub5134]

Hello bro 😚 Love you from India 😊

[@gudrunwibawa9973]

,👍amazing.... from Indonesia

[@user-mq1wv5iz5b]

Раааасссииииииия

[@40NO671]

Я из украины

[@Daviddd2601]

Привет

[@pinkpotchochoy]

triple h disliked this video

[@drewcook1985]

The frozen one is the best. Crushing it caused a massive explosion of sparks, the force of the explosion was so great, it made the press to jump, and pieces of the hammer scattered everywhere and hitting everything in the room: walls, equipment, everything you name it, one of them even land in a boot.

[@JordanBeagle]

1:50 Through the particle board, wow impressive

[@lucaskeui]

my God!! I didn't expect that explosion at the beginning of the video 😂😂😂

[@mushromboeinvading8168]

Might need some tougher walls

[@MarcSamuels562]

“Honey what did you today” “Oh ya know, just shattered a hammer.” “Um…wha-?”

[@robloxrules4524]

The sledgehammer really broke the hydraulic press for a bit there

[@local.gay.writer]

I think it's safe to say you won't be getting your deposit back 💀

[@Extrasailor]

I think that liquid oxygen can harm the hammer at -189°, but just bellow 0° down to -30° could realy make it hard to break. Also, the hammer has more resisting matter, if it is turn around by 90°.

[@nova_supreme8390]

Cold actually makes the material harder which in turns can make it brittle. There is a temperature where softness and hardness are ptimas so the material will not give in too much but neither cracks too easily. Of course you would have to count in the fact that added pressure to the material raise its temperature so there is also that. 🤷🏻‍♂️

[@acarrillo8277]

Finishing it of with the terminator theme was a good choice

[@SherKhan-jr7rs]

You are really crazy 😍👍

[@lakshya9992]

PLEASE KEEP A FLEXIBLE SPECTACLES UNDER HYDROLIC PRESS

[@YOKai_TYTOVICH]

He won't, he stole a video from the Russian channel "crazy Russian experiments"

[@Superknullisch]

Very interesting! Wonder how much the sledgehammer head is warming up though before it explodes? I mean due to the pressure..

[@unknownbeing5636]

0:51 me with headphones: damn that's loud

[@nachannel536]

Awesome work

[@MeditationMusic888]

yes, good work

[@TheVintagedudee]

The last one is mindblowing

[@gogogigagagagigo]

Creo que alguien tendrá que hacer unas cuantas reparaciones 👍🏿👍🏼👍👍🏽👍🏻👍🏻

[@youtriedlol9683]

I feel out my chair on the 1st one 😂

[@bacfacts]

Nice video sir 🔥

[@Gillty101]

PLEASE do a collab with the slow mo guys!

[@torela6732]

that would be awsome

[@user-zb1tc2pr2r]

Это русский канал, так что без слоумо.

[@egarkonb9615]

But its a reupload from Russian channel...

[@user-zb1tc2pr2r]

@@egarkonb9615 да какая разница? Видео украли самым наглым образом.

[@rihigamer2487]

I live you all time

[@MB-rt5bx]

Its not something id ever thought id get to witness, a sledgehammer exploding. Thanks for the video i guess lol.

[@will7its]

Disclaimer: oh well guess ill go back to cracking walnuts with my 500 ton press.....

[@ovidius9862]

0:51 I almost shit my pants 😳

[@redmist6131]

I heard the popping in the metal and knew it was about to go so no jump for me it was predictable but awesome

[@sobreaver]

Now imagine the pressures of being stuck at the centre of a collapsing star or in a black hole where not even mass-less light can manage escape o0 The scale of this universe is horrifically mind-bending oo

[@carpediemarts705]

Neutron stars are the silliest thing in this universe.

[@mohixx117]

3:27 wife is gonna give wings🤣🤣🤣

[@americanhydraulic3377]

U are the king of The press 👍

[@antetal9348]

Can I ask how you figured out 1Mpa is equivalent to a mass of 1 ton?

[@Nikioko]

What was to be expected. Cooling down makes the steel hard and brittle. Heating up makes it soft and malleable.

[@CredibleHulk]

It's exactly what we expected, it's just cool to see.

[@gaiuscladiusglaber9805]

Absolute!

[@joe18425]

You got my sub

[@barakmajed8265]

Good job

[@qzpm2350]

Like we have a Hydraulic Press at HOME.0:00

[@-Graham]

Warning taken. I'll be sure to not try any of this at home on my own 500ton press

[@luqmanzakir3530]

SLEDGE DAD IS TELLING HOW HE THE HYDRAULIC PRESS GOT TO SCHOOL WHEN HE WAS YOUNG

[@richardwalker1144]

Love the disclaimer "Do not repeat at home". Now where did I put my 500 TON PRESS.

[@Prince_Stefan_Briones]

After the 800 degree hammer was pressed it looks now like a flat hammerxD

[@sigizmund0_o365]

Хорошая качественная кувалда 👍

[@xXGrEyZXx]

"Darling, you have no idea whats possible"

[@greaterethiopia398]

Whoa! What the hell is a hydraulic press!? A sledgehammer!? Amazing!

[@sillicon8227]

A hydraulic press is a machine that is used to compress or press on things in factories, they use water thus being "hydraulic". These machines use water to generate force because water can't be compressed, the amount of force you put on water won't matter, it can never be compressed. By this principle, these machines use the pressure of water to exert a great force.

[@greaterethiopia398]

@@sillicon8227 Thank you for this interesting knowledge. It's an amazing machine. I can believe water can be this powerful. I wonder what force is exerted on the water, but I'll Google that, you've done enough amazingly 👏.

[@V_Vit101]

умно придумано, перезалив с рускоязычного канала на англоязычный, но всё ровно контент годный хоть и без голоса

[@Mrktoto-eu6mj]

Вот вот

[@Free_Music_No_Copyright]

Хотябы перевод здели, а так англоязычники с темже успехом могут оригинал смотреть

[@weirdhungidas8998]

Your right

[@carlosgvillasenorl6835]

Pero como que de ruso a ingles?

[@rahumanshafeek5525]

Keep an Thor Hammer let’s see how it breaks 🤭

[@itzzyashop9835]

Ok

[@anuradhasharawat8387]

Phle tu vo hammer la de phir tod bhi denge

[@terabaap5274]

Hela be like Hold my hand power

[@Himmelblauish]

T-800 to hammer: "sayonara, baby"

[@bubudanmora5081]

Smokin hot

[@itsahormr.g4421]

That hammer needed at least 30 mins in the cold

[@Nomoreidsleft]

So when it's super cooled it builds up potential energy and when it's heated, it releases potential energy?

[@meethepie]

Doesn't have anything to do with potential energy but rather material properties; extremely cold metals are more brittle and are more prone to sudden catastrophic failure (ie exploding into a million pieces) with little deformation, while hot metals are more ductile and will be more willing to deform as long as the material remains hot enough.

[@unknown-bl1uo]

"Dont repeat at home" i guess ill try it in the park then 😂

[@X-Gen-001]

Hammer's like, Hey I'm brand new! What did I do to deserve this? Well if I'm goin' down, I'm taking everybody with me.