50psi boost 1200+hp Nissan RB30 - Ethanol E98

[@richard4165]

30psi. vs. 50psi. boost, dohc vs. sohc, 4 valves vs. 2 valves per. cyl., 2jz vs. rb30, turbo lag, blow off valves, etc. All this wisdom is just pouring through the armchair tuner community and you guys at JPC have the audacity to show an RB30 actually making over 1200hp on the dyno! Imagine what you could do if you only knew what your computer bound advisors are trying to tell you! I am truly LOL. Great work, by the way.

[@Micheal31046]

WTF

[@riggs_219]

@@Micheal31046 my thoughts exactly.

[@Micheal31046]

Anonymous Rider 219 what.

[@AsadUllah-fv1ir]

Pl explain the meaning of 50 psi boost The whole concept

[@raiinydayz1889]

@Howard Keer why tf would you want to hack someones account

[@toxiccrafterz]

Legend says that the dyno room still echos the stututu sound

[@ekmalmohamad1225]

XD

[@jeroenbaumgart3685]

no

[@reneeharewood5053]

That flutter nice

[@M250-f6l]

#270

[@evan_lau]

Every time you get off the throttle, it's just like "SUTUTUTUTUTU!"

[@oistein74]

+Skylar Edge Don't even look like it has any DV.

[@austinturner5818]

+Skylar Edge what is BOV and is the turbo flutter bad

[@edgiemon6321]

Austin Turner BOV = Blow Off Valve. & Turbo flutter or compression surge are not necessarily bad but it does wear down your turbo's life. Some will argue that but you choose, longer life turbo sounding normal, or short life turbo sounding wicked cool?

[@mynameis657]

+Skylar Edge i have to go with turbo sounding wicked cool.

[@scootbmx01]

+Skylar Edge, compressor surge and flutter are not the same thing, i wish people would stop saying they are

[@SMCca]

I love the fact that the whole intercooler and piping shifts at 1:11. That is some SERIOUS airflow.

[@Cobra8888Colin]

$500 for the first guy to touch the manifold. xD

[@treydwayne2085]

i touched it. where is my $500. i even have the burnt scar to prove it!!

[@Cobra8888Colin]

Show me!

[@brandonsjsj]

Intake or exhaust? I will touch the intake lol

[@SlavMiniboss]

brandon johnson intake still gets hot ._.

[@brandonsjsj]

No where near exhaust lmao

[@nwigchert10]

50psi? Im no gearhead but isn't that like....DAAAYUMMMMMM!!!! Amounts of boost?

[@ryoc1]

Indeed it is.

[@Helllllerrrrrrrrrrr]

yea it is. lol

[@brandonmazzey3907]

Well considering in the 1980s especially 1986 formula one cars ran 5.5 bar boost pressur which is like 80psi in qualifying trim. Their motors produced anywhere from 1200-1450hp. 50psi is a lot don't get me wrong but there have been times were even more boost was used.

[@eagleone5456]

Ive seen a diesel run on 100 psi, I think it was actually 98, either way, still crazy high

[@teddymadsen8226]

Branden Peck look up the black pearl 1st Gen 135 psi

[@SUPERFORMIAN]

I just love the sound of the RB engines. Makes me happy when I see an RB engine pushing over 1,000 HP. This one makes nearly a megawatt. Still, it should have a blow-off valve.

[@MidshipRunabout2]

for dummies That's not a RB30DET It's a RB30ET I saw some comments saying that this engine is an RB30DET RB30DET is a single turbo RB30 Engine with rb20-26 DOHC head This one still has the SOHC head so there's no D in it

[@fullboost]

The RB30 was only ever sold as a SOHC anyway ;-)

[@havok10zz52]

I'm

[@MidshipRunabout2]

You're?

[@TheClone123456789]

It is RB30DET you idiot

[@babyrhinomotorsport8577]

you obvesly dont know your rbs as this is clearly an rb30e+T which is single cam "DET" Stands for Dual overhead cam, Electronic fuel injection, Turbo

[@WarpedYT]

0:36 ... Damn, 0:42 DAMN !!!!! ......

[@zakariarebhi7428]

Warped Perception 😱

[@Comet1310YT]

Yo i watch u

[@romirsarangi4341]

Hi warped preception Your content is the best

[@Perex_]

FLUTTTTTERTRTRRR

[@pvh_facp4001yt]

@@jaanbanaan72 that's an intercooler 🧀

[@FoxPopvli]

-Buy it -Put it in a Prius -Go to an eco cars meetings aaaand..... BRAAAAAAAAAP~STUTUTUTUTUTUTU!!!!

[@dimmacommunication]

FOX-POP-YT Yo have eco car meetings? damn the world is getting bad

[@supremeballen6407]

Everyone likes a good brap.

[@snareromie5295]

FOX-POP-YT LMAO

[@redbeardgaming8250]

I'd do that and take it to a cars and coffee.

[@alexchulzhanov]

But it runs on ethanol 😂

[@gp8666]

That's the most brutal turbo flutter I've heard so far 😲

[@renatinhodaheropuch1260]

Velozes e Furiosos 2

[@renatinhodaheropuch1260]

Put fit in Volkswagen bus 😂😂😂😂

[@TheJackinthebocks]

I think this shows how important intercooler technology is, as it will both improve power and potentially lower the exhaust temps at the same time. Can't imagine those manifolds holding together for 50+ passes.

[@simontist]

Danger to manifold!

[@mala7794]

americans: my supercharged v8 makes 700hp nissan: hold my beer

[@nikipiki1243]

My supercharged 10.6 v8 makes 200hp

[@ltrs1212]

"Hold my Wasabi"

[@spidermansteve6409]

Fastest 1/4 mile car in the world? Oh it's a supercharged V8.

[@nightmareinaction629]

remeber to add the it makes 760 stock

[@God-up1ce]

*hold my sushi*

[@smallenginedude71]

i made a youtube comment i am now an expert at cars.

[@flaggeduser4969]

SED71 ok

[@coin666911]

I'll allow it

[@romirsarangi4341]

@@coin666911 perfection

[@dan57ltr]

You’re not an expert until you can run 10’s with a stock barra😭😭😭

[@MyKonaRC]

Here is a perfect example of Japanese quality and engineering. 3L engine making 1200hp, while in usa, they need 5L and 8 cylinders to make to make 800hp.

[@legomass1000]

wrong. with that they can make about 3000hp

[@brettsharbono3022]

True, however with the amount of boost this particular engine is producing I can almost guarantee that it has all aftermarket forged internals and it also will be rebuilt on the regular.

[@94eh32]

Brett Sharbono what's your definition of "easily achievable"? because I want you to show me a v8 that makes 1500 hp on pump gas. odds are it has every internal piece replaced with a forged unit.

[@Olaf275]

94eh3 Sloppy Mechanics. Engine Masters. Both have made 1k HP on stock bottom end LS Motors. On pump gas.

[@Olaf275]

94eh3 and even then this motor isn’t even on pump gas so idk why you decided to throw that in there lol. This is run on almost purely ethanol. This engine on pump gas might make 800.

[@oatmeal9164]

It's cool watching the intercooler get moved around when it gets into high boost

[@HIntsOfLime]

The glow on that exhaust is mesmerizing

[@danielsinnett-jones2597]

that would make some bloody good pulls down the highway topping it off with an amazing sutututu

[@effortlessproductions]

Glowing manifold within seconds 😨😨 wowww plus the pipe flex is just incredible

[@carguy3217]

İs it going to fit my Honda?

[@legomass1000]

you probably could actually

[@SKC56]

turbo yoda: "no, i just can't do Hondas"

[@carguy3217]

LOL no one knowns the joke from mighty car mods :D

[@SKC56]

+CAR GUY hmmmmm, 6 speed in a honda.

[@SKC56]

+CAR GUY hey turbo yoda, can this fit to my Honda? Hey turbo yoda can this fit to my Honda or this is just for Subarus??

[@dannylopezcalderon7825]

This video give me chills like no other!

[@hecticturtle5981]

Vl turbo engines are amazing.... Thank you Nissan !!

[@andybes237]

small engine is enough powerful than Bugatti, 7900 L rev 1000 PH

[@Jez-ew9bk]

Andy Bes which one is more reliable and easy to maintain ?

[@AmaAndZing]

Jez100 0 the small engine.

[@kanushbhalla83]

So what you are saying that small engines can gives the same amount of torque as Bugatti?

@@kanushbhalla83 far more

[@kanushbhalla83]

Would you explain it how that's possible

[@poliuyttyrrr]

the throttle is fully open. The piston that allows to remove the air that is before admission is closed. When the throttle closing (cutting the fuel admission) creates a vacuum in the piston through a tiny tube allowing the piston to go up and remove excess pressure which lies close Butterfly

[@averyhuelsbeck3116]

This is still one of my favorite videos ever

[@HUMMER1301]

can i mount this on my datsun ?

[@esotericthegoat8175]

Yes

[@aaronhumphrey2009]

Put it in one of the early Z cars for a sleeper..

[@renatinhodaheropuch1260]

can i you as whenn Fiat?

[@kristonraffie8165]

the rb that gives the 2jz a run for its money

[@v8consumption]

How the fuck are those worm clamps holding to 50psi

[@Commonginger]

Magic.

[@hommie789]

+v8consumption Because they not worm clamps, which good to 15 psi, they are called t-bolt clamps and at 50 PSI they at the upper limit, Good to 55PSI, any more and have to double them all up.

[@v8consumption]

hommie789 no a few are worm clamps. and a few are fully supported t clamps

[@Shadow0fd3ath24]

Because they are good ones that are threaded. Those can hold 65+ that's what they use on drag cars when they're too cheap for t bolts

[@crripper9770]

best way to warm up your engine on a cold day

[@r1ashad]

Beating the piss out of that turbo with no BOV or Bypass. Congrates on the power!

[@Crizp23]

I'm extremely curious to how this engine was built. I know you can convert the RB26 to RB28 with a upgraded stroker kit. But i'm unsure if that same thing applies to this.

[@SPR-Ninja]

+NFS Realistic The RB30 was an engine that Nissan made for holden. It came in the VL commodores. A common modificatation in NZ and Aus is to take the RB30 bottom end and combine it with the higher flowing heads from the RB25 and 26

[@doropdennryu2433]

+xxxwhitelancerxxx ＸＸぬららのそＰ

[@SPR-Ninja]

+dorop dennryu Sorry mate, english? :/

[@doropdennryu2433]

+xxxwhitelancerxxx Sorry!! Mistake children (>_

[@doropdennryu2433]

+xxxwhitelancerxxx Sorry!! Mistake children (>_

[@boosthead3]

sooooooo much boost............boost makes me happy

[@norbertsmallegange6331]

i dont like the sound it produces when power reduced, a good thing would be to install a dumpvalve, because it is a surge that you produce in the blowerside of the turbo, that will kill the vanes in time

[@esotericthegoat8175]

It's flutter not surge

[@ngt84]

I love those sprakplug wires hanging over that beautiful spinning pulley....

[@porknbeans20131]

i love the sound of the turbo spooling back down all at once, its like awe man i was just getting started.

[@DothFrmBBL]

Spihk heart bust!? Spihk heart bust tell Sarah from the holy Bible to Spihk heart bust all all time mates internet Friends and all all time internet Friends for people driving by who could have Possibly Viewed Zumo's brother's bathroom doorway dad's brother's look alike's brother timidly, Confusingly, and Mistakenly hold up a dirty underwear as instructed from Zumo's brother's bathroom doorway dad's brother's look alike's brother's mother!!!!!!

[@Datsun510zen]

I see no BOV but... Flutter at deceleration is not the kind of compressor/turbo surge that damages shaft bearings, and motors. True compressor surge happens at peak power. When the turbo produces more air flow than the motor can swallow, the turbine stalls and compression suddenly flows backwards out cold air intake. Once the pressure drops, the turbo is able to grip the air again, boost quickly develops, and the turbo stall again. Because compressed air is elastic, this sudden stall and recovery cycle sends powerful reverberation through the entire intake, engine, and exhaust system. This is what causes damage. At deceleration, the throttle body is closed and the pressure reverb is isolated to I/C and plumbing. Although this is hard on the turbo, it's not life threatening because the backlash is minimized and pressure falls off quickly. Here is an example of the dangerous kind of surge. kzbin.info/www/bejne/pHTNZ4amrNFkebc Best regards to all.

[@jakeboyyy98]

Datsun510zen someone finally fucking said it, ive been saying this for years. Armchair tuners take note.

[@3rdGenGuy]

Its funny seeing 50psi in a tiny straight 6 making 1,200Hp. 50Psi in a 500ci hemi nets 10,000 horsepower

[@BruceCarbonLakeriver]

It would also be intresting to keep the engine under this load for a several minutes.. like 10mins? For temperature stability checks it need to run nearly a hour on fully load, or is this engine just for drag racing ?!

[@fullboost]

Bruce Carbon Lakeriver Yes for the drags but a street car too, so no way its ever going to see continuous load.

[@BruceCarbonLakeriver]

If I consider my driven routs through germany I had continious loads. If you initiate the cruise control above 250km/h you'll have generally a high load, even it wouldn't be the peak power of this awesome engine ;) -- I hope it will keep running for a long time :D -- safe roads for you :D

[@honda12345678]

Bruce Carbon Lakeriver Temp stability checks run an engine in a room for an hour at full load pushing 50 pounds of boost with little to no air flow for cooling? How many motors have you built - none?

[@BruceCarbonLakeriver]

honda12345678 At first I am using metric units and none of those irrational imperial units; second, how did you come to the magic number of .. a hour? And third, from where could you know how many engines I might have built? Magic crystal ball ? And 4th I did ask about for the requirements, so Fullboost answered that, thx for that at this time - and therefore the point is done!

[@caribbeangtr8077]

Bruce Carbon Lakeriver For what reason? Who is going to be driving under full load on a street for several minutes? If it's a 1/2 mile, hopefully it won't be more than 10 seconds. So wh put the motor under that amount of stress. The true test is to see how many pulls it will handle and stay in one piece like how it's being done now.

[@h0g2s]

No chu chu blow off sound, just a glorious huge turbo! love it

[@SkidMako]

OMG the exhaust pipes turning red in the dark ! Magnificent !

[@SergioPintoV300]

Single cam engine???

[@franciscorodr7966]

yes, now imagine if he had a head of an rb26

[@GeorgeCarlin88]

its complete lifespan without a car :D

[@mareksumguy1887]

LOL...yeah, this video documents this engines entire lifespan. XD

[@renatinhodaheropuch1260]

one my Satsuma Nissan 30DETT?

[@josephtalbot125]

I feel sorry for that turbo.

[@isaacsanchez7317]

Lol very true

[@renatinhodaheropuch1260]

My engine blowed are my F 150.

[@JesusTorres-qr1gz]

Hi guys, outstanding work of engineering, very neat indeed, I wich to be there but I am thousands of miles away but nice of you to shear it with us.

[@masterbaiter5162]

The flutter isn't even my favorite part of the turbo sound, it's the spooling, because I like to imagine how much air is being pulled through the turbine

[@TinfoilHatWearer]

how many times can you rev up that engine like that before it blows the fuck up... or at least blows a head gasket or destroys a piston or ring...

[@mareksumguy1887]

Not many... i assure you. Pushing that much power through a 3 liter with a factory cast block and head...

[@jacktorrance7847]

Wrong. Guys are getting a couple years of racing out of these.

[@randyranderson1621]

Couple of years for all that money and time, what a waste

[@mareksumguy1887]

Bullshit... not at this power level.

[@jacktorrance7847]

+Marek Sumguy Really? And whats your knowledge based in? If you were involved in the community and work on the cars maybe you'd understand its not that uncommon. Most get a light freshen up at the end of a season, shit even the 1320video of the 1300hp r32 he talks about running the same bottom end on 55psi since 2015 but hey since you know better.

[@JeremyredlinuxRoberts]

Those exhaust headers, jesus christ.

[@renatinhodaheropuch1260]

Não tem como colocar o motor RB30DETT num Fiat Duna SCR '92

[@renatinhodaheropuch1260]

@Rodrigo Ribeiro é um motor de um Nissan Skyline,Com motor RB30DETT e o carro do beamngdrive meu carro preferido é o Ibishu 200BX com motor 2.0 4 cilindros turbo e depois veio o Ibishu Pessima e o Covet,com motores 1.5 DX e 1.6 DX (Ibishu).

[@justinlarrivee3691]

Can someone explain me why someone that builds a turbo engine like that would run no BOV like that? I know some won't handle 50psi because they will just explode, other won't stay shut and create a boost leak, but some blow off valves can be adjusted with a spring to avoid that, even with that much boost. I just don't understand why they rather destroy a 2000$ turbo instead of a 300$ blow off valve. If someone can answer, that would be great!

[@fullboost]

+Justin Larrivée . Many go on about the 'damage' that will be caused without a BOV, but is this from first hand experience or others just saying it will cause damage...? I've seen countless RB30s without BOVs on the street for YEARS getting thrashed. The turbos have never had any problems and they were always running a decent boost level (20+psi). These were mainly bush bearing turbos. My current car has a BOV as it came with it, but previous cars never had them.

[@justinlarrivee3691]

+Fullboost maybe, I just though turbo flutter like that was destroying turbos, am I right? just want to know, I'm curious

[@justinlarrivee3691]

+Fullboost I'm mechanically inclined but I'm not an expert neither. I heard about compressor surge and the air going back into the turbo couldn't be good

[@fullboost]

+Justin Larrivée 'destroying' turbos, I'd like to see some fact a about that, is this based over 10,000kms, 200,000kms?

[@justinlarrivee3691]

+Fullboost I have no idea, this is why I'm asking, I'll have more accurate answers from people that knows more than me.

[@stacks1548]

Honestly this RB30ET isnt going to last very long everytime he pushes her to the limits!

[@rotor13]

So how to you explain engines that spend an entire season doing this exact thing, doing well over 100 passes in a given season and still live? They're dyno tuning it. They HAVE to do this.

[@rtklolness]

Still the best video on the internet. Period.

[@chiptuningptz]

Ну что сказать, валит)))) 😁💪👍

[@Citizen-pm]

Ебать, ели завели

[@Minecraftsgood]

Конечно этанол и льёт

[@jarrusjenkins]

how come it still uses a dizzy?

[@HotForgeChaos]

Because it works

[@xXfresh12Xx]

that turbo surge tho lol

[@mistercaap8260]

Flutter *

[@wadeshinners437]

Dose *

[@2jzgte408]

+DUB Productions flutter*

[@niftyrmz4506]

Quiver*

[@TheScoutGuyYTPs]

Succ*

[@davidca96]

I love the way this engine sounds.

[@lukep8406]

Thats a serious ignition system. See the spark coming out of the dizzy at 2:35

[@MyCrazyGarage]

I didnt know sparks can act like this! (Reminds me of an German thread from 2002. Someone thought he had an slow LAN Conection because the Electricity is too fast for the LAN cable and just flies out in the corners....)

[@lukep8406]

Yeah guess its an ultra high voltage discharge not unlike lightning. That sounds a bit like how me and my friends used to joke that the 1's would get stuck on the corners that 0s would just flow through lol

[@MyCrazyGarage]

Luke P Haha :D

[@SpeedDennis]

Veyron: +1000Hp, 8L 16 cylinder. Skyline: +1200Hp, 3L 6 cylinder... Where is this world going to!?

[@R3putaytion13]

The veyrons engine doesnt have the technology thats exerted in this one. That and this has been tuned extensively (Not sure what they did exactly)

[@Jolinders108]

They installed a big ass turbo ? ^

[@R3putaytion13]

im sure they have modified something internally but yes the turbo has a big impact on power

[@SnowGolem1TheL33t]

Whilst the comments above me are very relevant, do keep in mind the veyron ALSO has turbo, 4 of them infact, and it does have the technology. This engine wouldn't be quite as reliable as a veyron engine but yes it has some serious modifications done, fully forged RB30 sounds about right to me. And the veyron is more of a cruisy car than it is quick, if you want quick go for the Koenigsegg one:1, a hp for every kg of weight ;)

[@Jolinders108]

This man knows his cars ^

[@maxideath01]

Thats one Big Ass Turbo but yeah Turbolagg ::)

[@mewwew411]

+Max Bepunkt If you had installed an electric motor (not a dinky fan from eBay but a motor with real power) to spool up the turbo faster initially you would therefore eliminate the lag. This has been done by Volvo in their triple turbo charged 2L engine. (Which is not on the market though, does crank out 400+ HP with no turbo lag)

[@DriftNick]

+Max Bepunkt In a drag car the lag isn't a issue as you are building boost before you launch.

[@monparakeyur]

+DriftNick b'coz drag car racers already push the throttle half the way before the green light shows on the track.

[@krisjones0926]

+Keyur Monpara no because we have antilag and 2step

[@BoostedSpeedDemon]

What I wanna know is, how the fuck did the hose clamps on the couplers hold 50psi?! mine wouldnt even hold 12psi on an IHI RHB5 haha.

[@JimbagJimster94]

for more valves, 1 overhead cam vehicles typically have 8 valves (assuming its a four cyl engine) and dual overhead cams have 16 valves, or even 20v in the mk4 golf gti engines, dont really think people choose between dohc and sohc for weight reasons, hope it helps

[@bigboi141]

headers getting hot as hell, crazy never seen that happen

[@fromthebackofmymind]

Look on tube for Renault/Honda F-1 enginedyno tests and the low revs on this Nissan will be mundane. Now opining a tune from my generation....Cue music: "Wild Cherry" And yes Charles I am a white boy. Only as old as I feel!

[@woopimagpie]

Years ago a mate of mine had a Toyota T-18 with a crazy aftermarket turbo setup, we used to wind the boost up to 25 psi, take it for a mad blast, stop at the top of a hill, leap out and lift the bonnet and light our cigarettes from the turbo housing. I kid you not, we really did that. The exhaust manifold and turbo housing got red hot.

[@fisma6441]

It sounds like a V12 from the murcielago

[@BugattiVeyronBugattiliker2]

v12= two inline6s put In a V they sound similar exept v6 motors

[@MidshipRunabout2]

not all of the V12s are two inline6s put in a v shape

[@sam222_]

TheGlowingPiston wat is a V10 then ik it's not a single online

[@sam222_]

Inline

[@CUBICALNINJA]

FiSMA interesting

[@jouellp]

Car goes like , broaaaaaaap sutututtttuuu braaaaaaap sutuututuuu

[@jaysheeze]

IN R B WE TRUST. 😉

[@kolby4078]

the whole thing expands so much

[@michaelmccarty6582]

Wow, fucking amazing Zach. Let's make a list of engines with more power. That shit is sooooooo relevant and people totally inquired about it.

[@diegogomezolvera4025]

suena muy Chingon! like si entiendes lo que digo! 👍

[@Ignignokt5150]

Those poor turbo bearings .. :(

[@ogdrifter9977]

that turbo flutter tho

[@BryceMR2SW20]

No. Joseph Small is spot on. There are way to many variables to say that dose-ing is the cause shortened turbo life. The only thing you want to look out for, is when you get compressor surge whilst under load.

[@golferchin76]

I kind of think the blue silicone piping connectors bulge up when the boost same on. It's difficult to tell it did feel like they changed shape. Damn!

[@manospitsis]

Roses are red violets are blue my rb30 goes STUSTUSTUSTU

[@For54Ever]

sounds turbo suffering without Blow off valve ....

[@boostin99]

turbos love the stutututututut

[@davedangerous]

Neat light bulb lol.

[@rafaelrp07]

In Brazil we use ethanol in our cars. Kinda like 7 out of 10 cars here can run both on gas or ethanol. But, I think government ruled E80 spec here. There are many reasons why it's not higher level, but it's cool to see it in a project like this one.

[@aursi63]

This proves that both Nissan and Toyotq build the best inline 6 turbo engines

[@randyranderson1621]

Install a Trust Type-R BOV and save that engine.

[@fullboost]

+Randy Randerson Thanks we'll let them know :)

[@randyranderson1621]

Plus the Type-R BOV sounds amazing :-D

[@fullboost]

After listening to that, I doubt that Supra is using a blow valve.

[@S4ltyy_]

Why put on a BOV?

[@Dylanschillin]

Andrew Mulligan helps the turbo last longer and can control the boost better

[@SqueakyClutch]

Need that blow off valve

[@JayMark2049]

There is no BOV.

[@SqueakyClutch]

That is what I am implying.

[@JayMark2049]

MrSkillfullyDone Oh, sorry, I misread that.

[@FaultyMusic]

the sound of the air pressure surging when the throttle is snapped shut and the turbo has nowhere to push the air. the air tries to escape back out the turbo making a whistle/flutter sound at the same time

[@isaacsanchez7317]

Malachi Stephenson dude so much stutututu its bad for the turbo😂

[@erasmus_locke]

RIP that turbo. Stututututu-ing itself to death because the builders didn't use a BOV

[@fullboost]

A lot of people say this but provide no evidence.

[@fromthegods78]

Massive turbo lag, no air filter in front of the turbo, but one hell of an engine. Makes me watch it again and again...

[@jobmunene3263]

This beast will fly off the mountings soon people damn!!

[@JayandJenn07]

That's not blow off, it's turbo surge. VERY VERY BAD

[@DroopyBuilds]

It's the bov if it was turbo surge they would have fixed it.

[@lynel1985]

***** turbo surge that they eliminate for turbo longevity is when on throttle. This reversion you hear when the throttle is shut is not damaging to performance or longevity

[@TheBd50]

Lynel Simpson They can limit total boost for drive pressure reason, but when the fuel and throttle and turned off the shutter you hear in the video is TERRIBLE for bearings and can even snap shafts. THAT IS BAD FOR LONGEVITY get a clue good lord..

[@Gary-cd6rd]

Not true, the reversion that happens after the throttle is closed is negligible to longevity. Surge under boost is most definitely terrible, but not in this case. Listen to most of the newer diesel trucks, they have massive reversion stock from the factory without a blow off valve. The main reason a bov is used is to keep the compressor speeds up in between gears by not having it push against the throttle plate causing it to slow down quickly.

[@TheBd50]

That makes sense to help keep the turbine speeds up during shifting, however "reversion" is most definitely "harder" on a chargers shaft and bearings than if it were to not do any "reversion" at all. BTW: Most new trucks have almost ZERO reversion from the factory. The only way to get any kind of reversion out of them is to basically do a burnout, and let off suddenly. Under most normal driving conditions you'll never hear anything, their compressor wheels arent big enough, and the exhaust side A/R is too tight

[@_milo590]

The first pass i thought that was turbo surge...

[@jorgeery54]

and it is haha

[@scootbmx01]

+jorge ery, and its not

[@_milo590]

jorge ery you're quite wrong. That's the blowoff valve not exhausting enough pressure

[@scootbmx01]

+_Husky, what blow off valve? But yes a blow off valve not exhausting enough will cause it

[@_milo590]

scootbmx01 A BOV is installed on this setup, as well as all other FullBoost builds. You can hear it exhausting as much as it could

[@adikhan6913]

surging because of no BOV installed. Can be dangerous for turbo.

[@krisjones0926]

fluttering* no harm

[@HotForgeChaos]

JPC knows more about building and tuning engines than you do Eddy

[@ronaasid328]

+Eddy Khan you are correct and shouldnt be mocked and have your knowledge brought into question. a BOV does serve a purpose but in this case they like the surge sound (probly)

[@jclgaming34]

No it can’t mate

[@mraperish]

notice how he tuned the hotspot out of the center 2 cylinders?. last pull showed pretty even egt. sick motor. they really cop a floggin on the engine dyno.

[@Dermitzgermeister]

i heard that recent estimates since the top fuels cannot be dyno'd are around 10,000 now....freaking incredible

[@Draxindustries1]

Sounds terrible with all that grinding and scraping noise, why would anyone spend so much money for it to sound broken???

[@fullboost]

Not sure what you mean, is there a time stamp you can refer to?

[@jamescree6331]

+Fullboost Fuck that guy. It sounds awesome.

[@Draxindustries1]

Its just a comment i made....i dont him to fuck me thanks..

[@furfur13]

i think hes refering to the turbo bark at times like 1:42 or at 1:07 the idle does sound a little rough

[@Insidious589]

I don't think he knows what turbo stutter is. That would explain the comment.

[@zippy0099]

You guys only made 1200 with 50 psi..?lol..lame. My buddies, grandmas, friends, son has a toyonda civrolla that has an Ib6ub9 motor that makes 1500hp with only 30psi on 87 pump gas...Stop laughing, Im not fuckin' lyin' its the troof.

[@disasterdavut]

Bhahaha, 30psi and 1500hp? My friend's nephew's dad's friend is making 2300hp on 10psi boost in his Mitsubishi Civic. He has a rotary straight 6 engine. The engine is fully N/A and he does 7 seconds on a 1/4 mile with diesel gas.

[@FalconsOfAustralia]

Radical power ahahahahahh

[@blyndrotor]

Drag engine with auto trans behind it. Doesn't need a BOV. No lifting off during a run and torque converter takes the load when the trans shifts.

[@slickrick3010]

what was that puff of smoke at 1:17 ?

[@TrashHeapCustodian]

It's not a myth, compressor surge can damage turbos, but in super high power applications like this it's not really an issue since it's not going in a DD anyway. If this was supposed to be a street car engine, it'd be a good idea to have a BOV.

[@shery3331]

Am i the only one with the goosebumps throughout the boosts?

[@NikNak]

What blew my mind is seek g the interviewer move, purely by the amount of air forced through it. Holy shit

[@DJOpaixMusic]

1:33 why does that part turn orange? is it heating up to a dangerous level?

[@0j00n]

Depends how its built and the purpose for the motor. Top fuel dragsters have supercharged 8L v8s making about 8000hp.

[@adamhaselup1125]

That is the most disgustingly powerful rb32 iv ever heard

[@legomass1000]

Seriously powerful engine. Probably the most powerful rb engine that don't use nitrous.

[@Shadow0fd3ath24]

Lol not even...There's a guy on the Nissan forums getting 1650 awhp out of his rb26 stroked to a rb28. (Not stock at all lol) and he's only on 38 psi of boost (more efficient turbo)

[@legomass1000]

seth newman Nah that's probably faked.

[@Shadow0fd3ath24]

Patrick Crawford lol ok. There's TONS of guys in national competitions and youtube vids amd on forums putting down over 1100hp on the rb26 with stroker kits. Hell there's a guy who's putting down 2300hp on a stock block 2JZGTE.

[@legomass1000]

seth newman no no way I need links I've never seen anything close. (Apart from the rb26)

[@alexpalmer9194]

+Patrick Crawford 2JZ-GTE'S come with forged internals from the factory. Those numbers are definitely possible on the stock block.

[@sunjabibahladeen6394]

No bov is fine... The fluttering is fine too... The only problem that will kill turbos is when you try to push 40+ pounds through a restrictive intake and the pressure cant go anywhere, it soon pumps to way more than you planned for and The air starts forcing its way back through the turbo intake helicoptering the fins and shredding the bearings. This only starts happening when you try to make big pressure on small restrictive intake manifolds, pipes intercoolers, and even bad flowing heads.

[@sunjabibahladeen6394]

I'm talking about turbo damage, not flutter

[@meemdoggoriginallongdrink]

When your engine is so powerful it starts moving by itself

[@PanameraTurboSEHybrid]

So Everytime I hear a turbo make that sound when the throttle is let off, that means there's no BOV? I love that sound, there gotta be a BOV of there that sound like that!

[@R34GTRR35]

Its amazing that the RB30 powered General Motors Holden cars for how many years ???