Max Out The Stock Turbos On An E90 BMW 335i

Check out these essential sites for modification software and parts:
JB4: burgertuning.com/collections/...
JB4 bluetooth adapter: burgertuning.com/collections/...
MHD: mhdtuning.com/
COBB: www.cobbtuning.com/products/a...
The Power Adding Mods:
-----------------------------------------
Dual Cone Intakes:
www.vr-speed.com/vrsf-perform...
Downpipes:
www.vr-speed.com/vrsf-3-stain...
Inlets:
www.vr-speed.com/vrsf-oem-loc...
(there are so many sellers on eBay but VRSF specifically has the ones with 1.75" openings for the stock turbos
The Supporting Mods:
-------------------------------------
5" FMIC:
www.vr-speed.com/vrsf-7-front...
Chargepipe options:
www.vr-speed.com/vrsf-chargep...
burgertuning.com/collections/...
(you can also find many options on eBay but make sure you get the correct one for either keeping your stock diverter valves or replacing with blow off valve)
For a blow off valve you also need this to upgrade your vacuum line size:
burgertuning.com/collections/...
Colder Sparkplugs:
1-step: burgertuning.com/collections/...
2-step: burgertuning.com/collections/...
Fuel Pump Upgrade:
burgertuning.com/collections/...
Methanol kit:
burgertuning.com/collections/...
This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

[@milehighboost5521]

Been watching your videos for years when i had my e46s. Never had as much fun working on and modding a car like my n54. Excited to see where you take your car and how far down the rabbit hole you go.

[@ntnacs3879]

Can't wait to see the build man, thanks for all the E46 video you've made.

[@Cloverleaf7642]

Exciting times, Kid. Looking forward very much to the series of mods.

[@johncoss5604]

Sounds good. Looking forward to watching the upgrades.

[@nikoskalogridis]

Now the only thing left for me is to find a E90 335, keep the videos coming

[@stephenpato5524]

Just got an N54, loving these videos 🤙🏽

[@B0JACK]

Looking forward to this series, get a draggy and time the improvements of each mod!

[@friguy4444]

3:01 One Thing to note about installing catless or otherwise Down Pipes is if you are driving an "XDrive" model replacing cats becomes much more difficult as the front wheel driving system makes reaching them impossible unless you drop the sub frame. I did it but it wasn't easy. Especially after snapping one of the main bolts because of corrosion and rust. 😢

[@skrsys]

I would always recommend a custom tune by a reputable n54 tuner over a jb4 or canned tune. Not only would you see better performance safely, you will also be able to have it customized to your driving style and preferences. You can take datalogs and send it back to the tuner to fine tune to your preferences. With jb4 you going to have to deal with what you get whether it suits you or not.

[@breeze_0715]

What about a mhm?

[@breeze_0715]

What about a mhd

[@skrsys]

@@breeze_0715 MHD is ECU tuning, which is the best method.

[@bigash_n54]

Thought i would miss my e46 but dam the n54 is a beast. I love it, my first mod is going to be an lsd

[@gc5014]

Fueling and feeding the algorithm ⛽️ 🍔 🚀

[@michaelblacktree]

Maybe you could do dyno runs at the beginning and end of the project? That shouldn't be too expensive, and will show how much power was gained overall.

[@50sKid]

I found a dyno near me but it’s like $175. Plenty of dyno results for the stock 335i (about 265 to the wheels) so I think maybe I’ll just do one at the end

[@michaelblacktree]

Wow, that's expensive! In that case, maybe you could compare 0-60 mph times, or something like that?

[@momoghal3711]

Would always recommend a proper tune on a dyno with live readouts.. Not sure if that's allowed over there but here in the UK - stay away from these plug-in modules!! But do any map tuning after you have your mods installed so they can be tuned correctly..

[@agwealthstudio]

hey, what's up, ya this was a kick-ass video thank you very much. I just bought a 2007 BMW 3 series 335i convertible 2d twin-turbo, in really good shape, and its a fun car period already but I want to do all the mods you talked about in this video so I can make my car a super beast. I would like to be able to ask you questions about things if I get stuck or anything on any of the mods if that's cool. ok, thanks again for your knowledge on this car, can't wait to get mine completely finished.

[@unittingfoil7778]

Hey 50’s kid I follow the videos and appreciate all the e46-e9x videos, wishing good health hope your ok! ❤

[@Credman1883]

Great vid

[@mikemartin6857]

Just came across your channel. Great content ..... love the way you take the time to really explain things... I'm fairly new to the e9x chassis.. I own two e93's....an 08 335i and a 11 328i. I'm basically learning as I go...... as in my area in texas almost every one has v8 powered cars like mustangs camaros and challengers. On My 335i I have installed ..... 5.5 fmic..... vrsf charge pipe... 3in arm catless dp's ..burger motorsports dual cone filters.... I've also swapped out the og injectors for a set of index 12's.. I'm running the one step colder ngk plugs coupled with eldor coils. The mosfets went out on my orginal dme so I upgraded to an msd81 unit. Im currently running mhd stage2+ on stock turbos. In your expert opinion what would you say my current hp numbers are? 🕵‍♂️. Keep up the great content 💯

[@tahiry1811]

Did you upgrade the fuel pump or OeM for both hpfp/lpfp?

[@mikemartin6857]

It's oem

[@Opiti72]

Hi Jason, thanks for all your hard work. Man, if you come to Miami, I will cook the best picanha for you, slow cooking using fire wood only 😋 The 325 ci is getting better by day, thanks to your videos. Any chance that you get a 911 soon? I can't buy it until you get yours 😂

[@alexisrivera4665]

Can’t wait !

[@unrealadidas1387]

I watch your videos as if your my dad who teaches me how to fix my e46

[@MatthewGlad]

2" inlets are best for factory turbos you then don't need to remove the factory rubber spacer which keep the pipe on

[@in54ne82]

On mhd stage 2+ with or without the inlets my draggy times were 0.2 apart on v5 e40. I don't think it's worth it unless maybe you get a custom tune. I'd dyno before and after inlet instalation to see the differences.

[@glimping5530]

how accurate are these numbers, just curious i’m fbo with inlets and i have not been to the dyno yet

[@fitrich76-richardavalos]

💪🏻🙌🏻💯

[@gman3725]

Cool!

[@steffenscheibler5849]

On any RHD N54 if you want a tune from MHD or JB4 that is aiming at 400hp (at the crank) or more, you really must get Turbo Outlet pipes.

[@sebastianzuluaga9153]

Really why is this ?

[@sergiomoura7043]

What about the injectors? Will Index 12 injectors make some difference?

[@rafaelontiveros3428]

I enjoy watching your videos even if it doesn’t relate to my vehicles but now that talking about turbos…. what if you turbo your E46?

[@50sKid]

CA emissions won’t let me. 😕

[@r9337s]

Hey, where did you find E85 for $1.99 ?😊

[@jonah241]

Don’t forget turbo outlets to complete your system

[@punchgawd]

Hey I have a no crank no start issue Ive been trying to contact you but I have received no response

[@mannabatth4092]

Would love to see u turbo ur e46 😊

[@50sKid]

Alas, California emissions says don’t modify nothing 🥺

[@blakeelliott9238]

Remember more power more problems 😂

[@michaelb7508]

Your thumbnail photo is not a E90...

[@50sKid]

Ah, I’ll fix it, thanks

[@KappnSkips]

Stfu hes literally christ incarnate

[@lx4118]

If the coolant expansion tank leaks from the level sensor, can only the o-ring can be replaced or I need the entire reservoir ?

[@50sKid]

You can buy an o-ring kit on ebay

[@lx4118]

@@50sKid the question is if you can get to it because it seems to be inside of the reservoir, do you know ?

[@50sKid]

@@lx4118 yes you get to it from underneath. Here is a parts diagram: www.realoem.com/bmw/enUS/showparts?id=VB73-USA-10-2006-E90-BMW-335i&diagId=17_0322

[@hedcase4life88]

Orvis makes nice fishing gear. Really nice waders. You trout fishin?

[@50sKid]

Nah it’s just a shirt lol

[@hedcase4life88]

I take my X5 up north quite a bit and float tube fish its a great way to reset. I have the 35i which comes with an N55 engine which is basically a n54. BIG tip the HPFP is a weak point in these cars when adding power. There have been a few variations of the HPFP by BMW but it is a known problem. GL

[@darkwafflez_6190]

What’s the best way to approach 400-450hp first?

[@50sKid]

I basically said how in this video lol

[@darkwafflez_6190]

@@50sKid trick question. Maintenance first! 😂😂

[@50sKid]

@@darkwafflez_6190 bahaha, yeah I'm gonna make that video as well.

[@stavrosgreen4143]

I have access to 100 octane

[@danijellukic2196]

Bro you lost so much weight when i was watching you a few years back .. what happend ?

[@michaelblacktree]

He got healthy.

[@209euro2]

@@michaelblacktree haha that’s funny, I’m a slim type and my family always thinks I’m sick for some reason they think chubby is healthy

[@michaelblacktree]

@@209euro2 - Same here. My family used to poke fun at me for being "not fat". I think they were just jealous.

[@lexiaontube]

Dude are you ok ?

[@haywagonbmwe46touring54]

Yeah. Haven't really watched in quite some time. Thought it was a different dude. Keep up the great content!

[@adasterdezaster2865]

He looks like he’s ill or something I hope he’s ok

[@fastboatster]

@@adasterdezaster2865 he’s more than okay, he has a really great exercise and diet routine now

[@worldsails2000]

He did a video a while back about his weight loss. He changed his diet and started to ride his bike again. So he is living healthier now than what he was a while back.

[@haywagonbmwe46touring54]

@@worldsails2000 Hell yeah!

[@damon123jones]

400 who is alot

[@redrobotdubz]

All the overpopulation and emissions testing, cost of living, and everything else that goes in hand while living in CA Im so glad i dont live in Cali😂

[@jessejames00666]

Youll never touch 450 wheel without a in tank fuel pump and a custom tune. False advertising

[@DLaVey]

does one need to upgrade LPFP on pump fuel for max power? with FBO + inlets and outlets

[@BmwMe-uh9sy]

dang u got skinny

[@fitrich76-richardavalos]

💪🏻🙌🏻💯