Installing $300 EBAY TURBOS on my 335i (+ Fixing Wastegate Rattle for FREE)

[@adrianleblanc3389]

Thanks to videos like this and your previous on how to rebuild them, with them I felt confident enough to do it for myself and I’m happy to say I’m over 1000kms on my own rebuilt turbos that I had vsr balanced locally, and they’re doing strong! I couldn’t believe I could pull -15inhg and I could spin the flapper with a finger on the old ones!

[@TheBimmerBarn]

Success story right here! Thanks for sharing 😎

[@MrMiha00]

I watched your video about turbos rebuild with turbo lab kit, and it worked, I did it on 2 engines, one of them already ran 120k miles after rebuild.

[@tronn_carter]

Thank you sir! Bought OEM actuators for my new 19t turbos. The last few minutes where you were messing with adjustments really helped me piece together how to make the swap. Great content as always 🦾

[@Medal6]

Hope you do a follow up video on how they perform and how long they last, I’ll definitely do this mod to my 535i if it’s legit !

[@austinwild6110]

Love your videos man! I just bought a 535i wagon and may need to do this. I think this is the 8th video of yours I've watched so far. Great work!

[@BumpTune8462]

Currently enrolled in the bmw fast track/step program through universal technical institute. Looking forward to finishing it up and having the time to do some of my own work. Love the vids man.

[@MahmoodSuhail]

Thanks for the very informative video, it's one of the few videos that can be counted on one hand fingers. Great work ❤

[@davidaranda1862]

You should have done the rebuild through turbo lab of America it was 300$ of the bearings and rebuild service and you get upgraded bearing for more boost and longer turbo life

[@jhncvngh]

Perfect timing on this video. My stock turbos are starting to make their exit

[@isokeowon6785]

Are you currently doing this kind of service on other people's beemers locally? I have an 07' e92 that could definitely benefit from this service.

[@Bussdownbandit]

Just get a new set and do it yourself it be the same price for labor if u have someone do this for you buying 300 turbines lol u can have fun and learn more about your car other than just driving it

[@renovations5625]

Any updates on how they're holding up?

[@Nico_335i_DCT]

Very nice maintenance Chris. Very nice price for these replacements! Have a great weekend, Dutch regards, Nico.

[@FaderSkate]

The silver bell looking housing area on my CHRAS are loose I can’t tell if it that’s suppose to be that way

[@muayadalfarady4531]

Nice work brother 👏

[@EARTHKEENING]

6:00 i dont understand turbos from inside very well , sorry i have a dumb question can a leaky turbo mix coolant and oil from inside in some how ? I just took my car head cylinder off the block and man the head gasket is like new . Took the turbos out find out one of them leaking oil . What made me confused is my coolant container has no oil mix but the oil is filthy milk shake thing . So i said this has to be a headgasket . Note : my car symptoms was exterme case of white smoke from the exhausts like a fog .

[@Raptorius]

Great tip. Going to find if there are turbo modules for my Audi A6 Allroad TDI. 😊

[@KASTROxyz]

Thanks friend 😊❤🥰🐌🐌

[@pugs1377]

Will be good to see how long they last. Those chicom turbos seem to last a good bit aslong as they arnt maxed out

[@ilyld2003]

Very informative! Thanks!

[@BVonBuescher]

Just for the record, the 335 turbos aren’t made in Germany either. They’re Mitsubishi. Which makes him Japanese turbos. No knock on that at all though, Mitsubishi actually makes some pretty good airplanes. Some turboprops. In a former life I used to wrench on them.

[@tennaj1367]

Good video 👍...Updates?? Did it last? Thanks and good job,

[@bigmuvver]

Super video, very informative. 🇬🇧

[@kazshamael]

Thanks for the awesome videos, man! Been following you for a couple years now. How have these turbos been holding up since the install?

[@tahirneamd5424]

How long does it run without problems??

[@nicholasforrest2568]

Anyone know the part number for those O-rings that go on the CHRA that seal it with the cold side housing?

[@darkelectroster]

How to do it in B46/B48, where valve actuator is electrical, not pneumatical ?

[@slwbmw555]

The turbos working good?

[@112rorz]

Your vacuum guage is in inHG and mmHG. The reading is under 10 inHG, doesnt that make it less tham 0.5 PSI? How do we find out what the reading/spec should be?

[@marcioreis2648]

Awesome video bud. Thank you. Keep us updated .

[@N54.kevdog]

Do these need to be balanced??? I know they show sheets but are those legit or ??

[@paulvarrieur976]

I’m not sure I agree with the Chinese option. I’ve never been impressed with any part manufactured in China for a German car. The proof of this choice will be in its longevity.

[@Zwilkins8]

Back to frequent uploads!

[@MrKillerhaze]

Great Job 👏🏼 wish I could work on my car like you I’ll definitely safe a lot gotta pay someone 1.2k for a stage 3 clutch install 🤦🏽‍♂️ you did the turbos I can only imagine how much they would charge me lol 😂

[@Toobs138]

How long do you think it took to remove the turbos?

[@supermanwithheat]

Depends on your own mechanical ability and the tools at your disposal. Took me about 45-60 minutes from jacking the car up to actually removing the turbos.

[@tylerjones4060]

45 min to hour if you got the want to and then tools torx and E Torx (external torx set)

[@BassFraud]

MHD+ ? 🔥🏎💨

[@tylerjones4060]

SUBSCRIBED! Thanks !!!!!! I’m about to tackle this on my car just lost boost today finally….. can I ask where you got the air pump to adjust the wastegates? Lmk please sir ! Notifications ON sir lol. 🤣

[@tylerjones4060]

Sorry just saw the link to it man lol ! Thanks again and can I ask how they did afterwards performance wise ?

[@TheBimmerBarn]

Just put over 1,000 miles on them so far, and hopefully going to tune the car this month! I'll post more videos with updates, but so far so good! Thanks for watching :)

[@cjlomax2156]

Good content ...!

[@dawiskid187]

Another reason I don’t like the N54 N52 for me all day cheap to maintain run like a champ very reliable..

[@mikemartin6857]

I have a small amount of wastegate rattle upon start up on my fbo stage 2+ 08 335i. Never had any boost issues .......and every once in awhile will get a little rattle on hard pull. Found a shop in my town that is gonna charge me an hours labor and is gonna tighten up the wastegate rod. I'm hoping this is gonna work and extend the life of my stock spinney boys. What's your opinion?

[@TheBimmerBarn]

Worth doing the adjustment! Less rattle, more booooooost :)

[@mathewhoffer4541]

$300 each for 2 made in china turbos that maybe new but means the parts where made in japan/ china versus $59-$89 each for a quality rebuild kit and possibly $100 each for rebalancing if you forgot to mark your nuts prior to disassembly ? much more budget friendly. and you are using the original turbos and impellers. Only reason to buy new is if changing the size and impellers.

[@briangarcia1946]

Bravo

[@MrBchott]

U didn't compare them ...

[@jimwong2823]

past I bought eBay Chinese parts my BMW. all junk. I rather pay more to get from reputable seller. I've not had issues or problems