$51 Homemade Barrel Kayak How To

[@bradchase6831]

Most descriptive video I have seen yet. Thank you much.

[@chud327]

Cool and thanks for watching.

[@ericvillanueva754]

Good Job! Nice and cheap DIY mini boat.😁😍😁😍😁😍😁😍😁😍😁

[@chud327]

Thanks so much and thanks for watching

[@SAVAG3RABB1T]

Aweome video! Loved the instructions. My wife and I are inspired to design and build some for 2 based on this build for fishing a small lake. Newly subbed. Looking forward to more content!

[@chud327]

Very cool, I want to see how yours turns out. Also, please check out my homemade barrel pontoon boat builds. Thanks for watching and for subscribing!!

[@eggyboi1217]

The people who say “just buy a kayak“ will never understand the joy of making something strange and fun just for the heck of it.

[@chud327]

Very well said and. thanks so much for watching.

[@SAVAG3RABB1T]

I doubt anyone that sees you in a home built boat would laugh at you. They'd be like that's so cool!

[@j.w.m.rhynejr9766]

Great video for the education of us old timers!!! Got to try this SOON!!

[@chud327]

Thanks so much and let me know how it turns out. Thanks for watching.

[@JamesThompson-xl4yu]

Cut another barrel in have and glue to front and back to give storage areas which would also add flotation and allow the 2 pipe on each side plenty. Nice build!

[@chud327]

That would be cool and more leg room too. Thanks so much and thanks for watching.

[@Bentson24v]

Nice job on the build. Looking forward to future videos with this thing

[@chud327]

Thank you so much! I am too, I am thinking trolling motor next. Thanks so much for watching.

[@harryfritter8266]

That's really cool! I was looking at the design from above and wondering if a paddle wheel could be made from it. I don't know why I thought that. Such a cool project

[@chud327]

A couple of paddle wheels would be sweet! I may start with a trolling motor first. Thanks you so much and thanks for watching.

[@chaegibson720]

chud327 please make some peddle paddle wheel boats that would be amazing

[@Paulman50]

You never cease to amaze me, that's a brilliant build, BUT !!! , you know as well as I that, that thing has to have a motor.

[@chud327]

Thank you so much!!! I am wanting to stick the trolling motor on next. Thanks so much for watching.

[@ccccen]

Now that's where you'll spend much more monies, do to registration due to a motor, all motors in the wATER MUST BE REGISTER WITH DMV.

[@jairoleyva123]

Looks and works great! I've made one myself. If you place the pipes a little higher about 15 cm (6inch) UP from the low part of the barrel the pipes won't go so down to water. You did a great job.

[@chud327]

Good tip, I should try it and thanks for watching.

[@jairoleyva123]

You have been an inspiration to my Projects and many people's. Thank YOU for taking the time to share.

[@bashirahamad5050]

@@jairoleyva123 glu. Is. Name

[@613Builds]

thats cool! the last kayak video was a popular one. neat project thumbs up

[@chud327]

Yes it was, it was unbelievable. Thanks so much and thanks for watching.

[@supergokue1]

Great job on the boat! Also, thanks for the shout out. Keep up the good work.

[@chud327]

Thanks so much and will do! Can't seem find time to remember to call. Thanks for watching.

[@sumberrizkiteralis]

Greetings boss, Indonesia glides, great boat pvc. so want to make. while drinking coffee. black coffee success

[@chud327]

Sweet and thanks for watching.

[@2007sssss]

Brilliant video - thanks from the UK!

[@chud327]

Thanks so much and thanks for watching.

[@v6d6]

Looks great. Just wonder if it still works if you dont use the Ts and elbows. Instead simply use two 2x4 to hold the barrel and the pipes.

[@chud327]

It should do fine… thanks for watching.

[@carolinecaroline4667]

I feel you need 2 barrels next time. Not convinced that your craft floats well enough. But in the end. Awesome idea.

[@chud327]

Mayeb next time! and thanks for watching.

[@terrycollins3954]

Ideal for fishing up and around the Taymar river and I’m just a 5 minute walk from the river👍

[@chud327]

Very cool, grab a wagon and pull it to the river. Thanks for watching

[@seanclay4188]

Great idea, i like the ingenuity, also very cool your a teacher!

[@chud327]

Thanks so much and yes, teaching is cool. Thanks so much for watching.

[@mikeemmons1079]

Will it make the Cuba run? Asking for a friend.

[@chud327]

Funny and thanks for watching.

[@jamiekatz7591]

When it comes to glue you should use the 925 it is primer and glue in one works really well save a few bucks

[@chud327]

I love that, where can I find it? Thanks for watching.

[@blazeitmichael3413]

I made my own pontoon inspired by your other one, I'll have videos of it on my channel at some point. All the lakes and my ponds around here are frozen over so I can't use it rn

[@chud327]

Can't to see how you did it, thanks for watching and waiting for your ice to melt.

[@mishawakapost2681]

Fist bumps 👊👊👊👊👊, high fives/pats on the back ✋✋✋✋✋, extra thumbs up 👍👍👍👍👍

[@chud327]

As always, thank you so much!

[@surreal75yt32]

Is that a 92 firebird at 6:30?

[@chud327]

Close, that is a 92 Camaro. Thanks for watching.

[@RockeyDAproductions]

i like the color sceem, its swimming pool colors already.

[@chud327]

Yes, I love the colors of it. Thanks for watching.

[@charliekirsch8051]

This is really cool, I love these

[@chud327]

Thanks so much and thanks for watching.

[@thomassmith8700]

Was it hard to paddle? I need to make slim barge style pontoon I can use a chainsaw on. Cut trees that are blocking the rivers and creeks in my area. For people who like to paddle. Been thinking of using some 15 gallon plastic drums and a 4x8 sheet of pressure treated plywood cut in half so the barge would be 2'x8'. That way two people could carry it in and out of tight spots when necessary.

[@chud327]

It was not hard to paddle, but it was slower than my kayak. It was also a little bit slower to turn than a kayak. But you could easily build a platform on the front and / or back for hauling the chain saw. You could even add a couple more pipes to make it float a bit higher. It would suggest putting a trolling motor on it to get to the limbs. I put a trolling motor on this on in episode #2 and it was much better at getting around. Good luck and thanks for watching.

[@chilant]

That’s awesome man. Keep it up .

[@chud327]

Thanks you so much and thanks for watching. I plan to keep it up!

[@charliekirsch8051]

I haven't seen some of your mowers in a while, the Craftsman with the 589's on it, the Moto mow, the weed eater. And by the way, if you still have them, the boggers you tested in the vid where you put the 589's on the Craftsman, those would look great on colonial craftsman

[@chud327]

I still have most of the mower, however, I did sell the 589ed Craftsman and I let someone use the boggers. I am always hunting bigger and better boggers, but no one seems to want to get rid of them. Thanks so much for watching and I will try to get some mower action out soon.

[@usinoz]

Inspirational. Great work .

[@chud327]

Thanks so much and thanks for watching.

[@MrEemancing]

Good idea friend

[@chud327]

Thank you so much and thanks for watching.

[@captainfragger6295]

An inner tube under the barrel would carry a lot. The pontoons would work as stableizers... Hawaii style

[@chud327]

I really need a bigger barrel, like maybe 100 gallons... Thanks again.

[@docink6175]

thats cool but Id need 10 pipes to stay afloat and a bucket of crisco to get in the barrel...the barrel barge is a likely candidate though

[@chud327]

Got to be the funniest comment of the week or maybe month! Thanks so much for watching.

[@curiousgeorge4674]

I love building anything out of PVC.

[@chud327]

Me too, it is a good material to work with. Thanks for watching

[@terrycollins3954]

Ideal for fishing on the local river👍

[@chud327]

As long as you are not too tall, thanks for watching

Nice work.

[@chud327]

Thanks so much and thanks for watching.

@@chud327 You're welcome.

[@thomaskitlica5572]

Why would you offset the pontoons and put it off balance

[@chud327]

I did some experimenting with where to put the pipes, I feel that was putting it in balance. Thanks for watching!

[@garyjohn316]

The canoe holds water pretty good!

[@chud327]

Yes it does and thanks so much for watching.

[@zacharygromak1910]

Looks good

[@chud327]

Thanks so much and thanks for watching.

[@bitsnpieces77]

That's awesome works great 👍

[@chud327]

Thanks you so much and thanks for watching.

[@richardburgess5215]

Great idea

[@chud327]

Thanks and thanks for watching.

[@mowermananymower574]

Is that the Murray I can see in the back ground

[@chud327]

yes, I think it is and thanks for watching.

[@CustomKartsAndMore]

interesting. that seems to work pretty well, lol. thanks for sharing 😄

[@chud327]

I was impressed with it and thanks so much for watching.

[@rubenmejias7302]

2 pipes on each side made a big difference

[@chud327]

Yes, it made a huge difference. I had 4 more just in case. Thanks for watching.

[@Mason90209]

“Bud Light Presents, Real American Heroes.”

[@chud327]

Funny, not that I drink bud light, but still funny. Thanks for watching!!

[@zackkasey]

Lol awesome! I love your channel. Thats why I subscribe. Keep it up Chud

[@chud327]

Awesome comment!!! Thanks so much and thanks for watching.

[@cannonwagner2560]

Wish I had the drive to do this

[@chud327]

It was fun! Thanks for watching.

[@waynegilchrist1596]

Not a "white water" craft but a fun build.

[@chud327]

Would no be great for hitting rock at all. But yes it was fun. Wish I could find bigger barrels. Thanks for watching!

[@waynegilchrist1596]

@@chud327 not sure what sizes of barrels are available but larger ones would be good. One thing I haven't seen is anyone using foam to fill their barrels. It would offer an unsinkable safety factor and it's fairly inexpensive... Just a thought.

[@robertmarrs386]

Is that in yullee fl?

[@chud327]

That is Loftin creek in Yulee, is that where you are at? Thanks so much for watching.

[@robertmarrs386]

@@chud327 I grew up there. I have lived near tulsa ok for last few years. I use to fish at that dock all the time. What a small world.that creek is loaded with large gators.!!

[@robertmarrs386]

@@chud327 great job on the kayak.

[@chud327]

Thanks for the tip, I will keep an eye out for the gators... Yes to the small world part and thanks for the reply.

[@chud327]

Thank you so much!

[@rond9619]

Great job as always, your instruction are right on and i always look forward to your videos. Thumbs up :-)

[@chud327]

I had to cut out a bunch of instructions to keep the video from being too long. Just kept what i felt was essential. Thanks so much for watching and for commenting!

[@corneliushoward4343]

Man this is amazing

[@chud327]

Thanks so much and thanks for watching.

[@davidrobinson7112]

IMPRESSIVE

[@chud327]

@@davidrobinson7112 thank you so much

[@terrycollins3954]

The point about leaving out any foam is ok until you may have a leake🤷‍♂️😳🤬foam acts as a good buoyancy aid to prevent that situation🤷‍♂️🤓I’m in the process of making one myself for fishing on the Taymar river 🇬🇧. Great video

[@chud327]

Very cool are you going to share pictures on my homemade barrel boat Facebook group? I would love to see it. Thanks for watching!

[@ahmadmersarani3767]

PVC-pipe can be put styrofoam inside for unsinkable purpose... hehe 😁

[@chud327]

Good idea and thanks for watching

[@kend3900]

Nice!

[@chud327]

Thanks so much and thanks for watching.

[@boashna]

I like it ….I want to use this for catching great whites , I use the fisherman onboard as bait . ..see my next video catching Great whites

[@chud327]

I would like to take it out in the deep sea, but I'll pass on the live bait part. thanks for watching.

[@asd111qq9]

maybe put the mini wheel on.

[@chud327]

I am not sure what mini wheel, but thanks so much for watching.

[@RockeyDAproductions]

OHHHHHH, i have been using that pvc glue wrong, i thoght it was like CA glue you use on speakers. you put on the glue part first then the purple stuff was an activator.

[@chud327]

Funny and thanks for watching.

[@jranbjrnsen7892]

Ey thats pretty god

[@chud327]

Thanks so much and thanks for watching.

[@captainfragger6295]

Foam is heavier and displaces the air. You lose most of your air.

[@chud327]

I agree with that and stay away from foam. Thanks for watching.

[@my93foxmustang1]

Should have mounted an electric motor to the front

[@chud327]

Will keep in mind for next time, thanks for watching!!

[@zacharygromak1910]

Maybe Build it big

[@chud327]

A bigger barrel would be nice... Thanks for watching.

[@Thaynara-b9m]

fala aí meu amigo que falou Nelson do canal Nelson Costa pesca em família no estado do Rio de janeiro Itaboraí estamos junto vamo que vamo ótima pescaria um grande abraço amigo né

[@ccccen]

tHE 2 BEST DAYS FOR A BOAT OWNER ARE WHEN HE BOUGHT IT AND WHEN HE SOLD IT.

[@chud327]

I have heard that before and thanks for watching.

[@michaelmello9510]

Nice 🤙

[@chud327]

Thanks so much and thanks for watching!!

[@atworkstation]

Awesome

[@chud327]

Thanks so much!

[@borfishing7690]

I want to see a fish caught from it.

[@chud327]

It will have to be catch and release, I got no where to put him... Thanks so much for watching.

[@alvincook8888]

Cool..

[@chud327]

Thanks so much and thanks for watching

[@astig7135]

Fuck yeah! My kind of youtube righht hurr

[@chud327]

Thanks for watching!

[@bobbyduke777]

needs a motor.

[@chud327]

Tried a motor in later videos and thanks for watching.

[@astig7135]

Fuck it why a paddle? Why not just put a little motor in the back

[@chud327]

Watch later video, it had a trolling motor and then a gas kicker too. Thanks for watching!

[@alsade4331]

فكره حلوه عمل قارب

[@chud327]

I don't know what you said, but thanks for watching.

[@ccccen]

No motor, no registration, it's like a canoe .

[@chud327]

Yes, pretty much. We only have to register small crafts if they have an engine, even if it is a trolling motor. Paddle boats require no sticker. Thanks for watching.

[@fabbrizziotosti6991]

I tubi di plastica dovevano essere di diametro un pò più grande allora si.

[@scottrakes1622]

The inner meth-head in me loves this guys videos and appreciates his ingenuity. 😂

[@chud327]

Thanks so much and thanks for watching.

[@shizont]

I like your workmanship and frugality BUT I was very disappointed in your approach once I heard you were a teacher. There is no need to guess IF one of these home made kayaks will have enough bouyancy, that can be calculated. Each 10 four 4 inch closed pipe will displace enough water to provide 44 pounds of bouyancy. 2 pi r l = volume of pipe or water displaced. Water's density is 1 gram/cubic centimeter. If I ever do one of these myself I hope to include a little high school math in the instructional video. PS, I am not a teacher

[@chud327]

Maybe that is why they fired me… sorry for the disappointment but thanks for watching.

[@edemup44]

Off season for barrel boats 😂😂😂

[@chud327]

Hope to get it back in the water soon! Thanks for watching.

[@حدوتهصحراوية]

الله ينور

[@chud327]

I don't know what you said, but thanks for watching.

[@teknikkemal07]

😲😲😀😀👍

[@chud327]

Thanks so much and thanks for watching.

[@ccccen]

$51 my butt, don't forget, you got some for free, I say if you were to buy it all it'd be around $150.

[@chud327]

That is what I meant and maybe more than $150 with today's prices... Thanks for watching.

[@WyattHenry1MSubscribers]

w

[@chud327]

Thanks for watching and for the "w"

[@J-Justice666]

BAHAHAHAHAHA....

[@chud327]

Thanks for watching!