[51] How to Set Firmadoor & B&D Roller Door Limits

[@rollerdoors]

It's gonna happen! Your garage door, gate, or window shutters will need fixing someday. Prepare now with my DIY video tips! Subscribe and join the community! Plus it motivates me to make more videos (it’s free) tinyurl.com/garagedoorsYT

[@WoodyinBright]

If only all DIY videos were like this! Clear, concise and accurate. Many thanks, as I couldn’t find instructions on how to do this on the B&D website.

[@rollerdoors]

Thanks Graham much appreciated. I love getting straight into it, I don’t see the point of adding in 5 minutes of fluff at the beginning of videos just for watch time. I also check out a lot of DIY videos and it annoys me haha.

[@subsonicdeathmonkey]

Thank you. This was incredibly helpful and I appreciate it. Hope you are well.

[@rollerdoors]

Thanks heaps! Have an awesome week.

[@evanjohnson3329]

Legend. Thanks for the advice, worked perfectly for me

[@mikilonimoli3835]

You are the man 💪

[@queenslander954]

Cheers mate you’re a legend , as my B&D roller jut went through Cyclone Jasper up in Cairns & it seems to be now going down too far and couldn’t get the Manuel pull cord to work , power is back on now and if I have it have it up about 40-50 mm off the ground and then the pull cord works so your video is going to be invaluable 🙌

[@rollerdoors]

Bloody beautiful glad they helped and thankyou for the support ✌🏻

[@mohammedhasan7364]

You spoke about limits thanks but How do we set the pressure or strength of shutting , not sure if I’m using the right words mate , my door stops and goes back up . I have tried spraying garage ease into channel and channels are not damaged . The door channel maybe a tinny bit wide so the door flexes as it comes down and loses it’s momentum to come down Tq

[@rollerdoors]

[40] This Roller door motor has a sneaky hidden adjustment - don’t call the service number kzbin.info/www/bejne/qXPWf2ZvdrJloas

[@ev_re1004]

Thanks! Saved the day.

[@rollerdoors]

You're welcome!

[@lindagrinter9898]

Thanks that's really helpful!

[@rollerdoors]

Glad it was helpful!

[@bobsmith4065]

Brilliant.. thanks 👍

[@rollerdoors]

My pleasure! 👌🏻

[@TroyMurphyTroyMurphy]

How do you erase the orange service light and the beeps. When the door doesn’t need a service

[@rollerdoors]

Setting the limits should reset the service indicator, usually it will go away after a week anyway on some machines.

[@101spirited]

Good video. Should the stops need to be reset after short power outage? Thanks

[@rollerdoors]

Thanks ☺️. No after a power failure it should hold the memory

[@101spirited]

Now I get halfway through resetting stops and the service light keeps coming on. What do I do now? Thanks

[@themix5409]

Is there a video about how the I connect a remote to this one?

[@rollerdoors]

Should be the same - [28] B&D Roller Door Remote Erase & Recoding. Clearing the memory and reprogramming kzbin.info/www/bejne/gHXEdZV-iphom68

[@yewtubez]

Thanks !

[@rollerdoors]

You’re Welcome!

[@almostthere2024]

Thanks!