.54 Cal TC Renegade STOCK

[@blueridgeboy6791]

What are you using to swab the bore, a mixture of murphys oil soap and water?

[@cdp50359]

I cant get enough of your videos, thank you for sharing

[@oldie4210]

That tc surprised me

[@jamesholt6032]

I enjoy yur videos.. my first Muzzleloader was a T/C RENEGADE ...54 CALIBER... I REALLY ENJOYED...AND STILL KEEP A T/C in my possession...54 caliber T/C Hawken was my last Purchase ..

[@dougowen1521]

Where do you get your I bullet

[@rics44]

Is your front sight .404 or .494 height ?

[@briaschr]

Where do you get your bullets from

[@HamiltonOutdoors]

One of my viewers sent me over here to your channel, just subbed

[@randylayne4581]

Hi Lewis... Enjoy your Videos ... I Have several Pre Warning Thompson Center Hawkens. Do you recommend the Lyman Front Glode sight 494 or 404 hight?

[@normanphair8488]

What's in the spray bottle what's in the bottle

[@olehemlock]

I heard years ago, the first few years of production of the 54 barrels were Douglas barrels.

[@rowenbaltazar6102]

Must be impressive, being big bore at long distance !!

[@jackmeoff2396]

Amazing.

[@jimcallicoat]

Those Williams sites are just about as hard to find as black powder these days.

[@idaholewis265]

Yes unfortunately so, Hopefully they get them back in stock before long, they are an AWESOME Sight 👍

[@jamesdenton3692]

@@idaholewis265 TWO years later and still can't find squat for TC sights!!!

[@idaholewis265]

@@jamesdenton3692 That is crazy!

[@Flytyingwithdenis]

Your a bible of info, love your comments.

[@wesleyharding7544]

Do you still make videos?

[@capt.martin5169]

Really value your info, appreciate you taking the time to post it, love your videos, Thanks!!

[@improman1]

YYEAAH WAY TO GO YOUR THE MAN EXXXCELLENT~EEE

[@Adam-fk8oq]

Hi Lewis....what's the spray bottle for? Cleaning solution?? Some use windex, window cleaner here in Australia.

[@idaholewis265]

It is a solution that i Swab between Shots with, Hoppes #9 and isopropyl Alcohol mixed 50/50, It works really well 👍

[@Adam-fk8oq]

@@idaholewis265 just the std. Hoppes #9? Not the Black powder #9?

[@Strutingeagle]

Thank a cigarette the rear sight didn't fall completely off. You could put up a piece of tape with a hole in it and have as good a sight as that one.

[@brysonfogg7752]

What diameter bullet mold should I order for my tc renegade .54

[@rationalmind6362]

I would like to know more about that bullet, where can i get the mold for it ?

[@bw6538]

That looks look enough energy to penetrate a buck at 500 yards

[@fruitfarmfords8243]

Probably a bison.

[@rationalmind6362]

Im trying to find information for the 500 grain 54 caliber i bullet. I can not find any information on line about it. I would really like to get a mold for it. Any information would be greatly appreciated. Thanks

[@wesleyharding7544]

Thanks. Do you ever shoot the TC 45cal Hawkins?

[@CapnSchep]

Man that 500 grain bullet really puts a whammie on that steal ..!

[@segarza]

Wow! That round hits hard!

[@staceyporter6095]

Very good shooting Lew!! That's crazy the difference in the two rear sights!

[@Adam-fk8oq]

Love your videos!!

[@kevinhart3701]

I have the Williams rear sight for a .54 Cal Renegade. How have you installed the sight to allow the elevator to be fully lowered without it hitting the stock? It currently rubs the stock at the middle setting.

[@tommiller7652]

Lewis. What are your thoughts on Pyrodex powder sub. Thank you in advance

[@BigFiveJack]

I enjoyed this video!

[@wish2fish37]

What’s in the spray bottle?

[@dylanschulz2404]

What is weird is the Lyman rear sight I just purchased for an old 22 looks just like the Williams! Nice shooting. Just scored a flintlock 50 renegade.

[@williamster2015]

Will the Williams FP Hawken rear sight work on a Cabela's Hawken/Layman Trade type rifle?

[@idaholewis265]

I am not familiar with that particular Rifle so i can only assume? I say it will work, Of course You would need to Drill & Tap the Tang, and you might have to remove a very small amount of Wood on the side for the Slider to freely move up & down. Simple to do 👍

[@williamster2015]

@@idaholewis265 I was sure it could be done I wasn't sure if I'd have to remove material or shim the sight once it had been D&T. If I have to shim I may bed the tang and stock if that route will work. I have a TC stock but it's 15/16 so no help there. I'll go a head and order the sight and see what needs done with the Investarms stock, thank you for replying.

[@robp5t]

love your videos, I heard you mention something about an I bullet. Is this something you make? Thank you

[@brysonfogg7752]

What diameter does the renegade like

[@jacklowe3788]

Thanks for the Good Info. Did T/C Renegade ever offer .45cal barrel? Just curious I inherited several Muzzleloader loaders from my passed father- He always tried to get me interested when I was younger but guess just never had time making living raising family- One of guns I have is Very nice original not shot much Renegade w/ 2 barrels .54 & .50cal-Just wondering which caliper I should put my effort to start learning / practicing long range shots- Recommendation on bullets - I have Lee REAL mold for .45cal & .50cal also many bullets that Pops had stocked up like Great Plains several others- Can you recommend Caliper & bullet I should start to learn with? Have both flintlocks & percussion - Have lot shooting experience just not much w/ Black powder- Trying to learn all I can - Thanks for making most informative videos- Much Appreciated! Jack

[@marcussamson7640]

how do you get a baseline setting for 500yds persay

[@brandonmahnke3716]

What bullet do you recommend for a stock renegade?

[@straightpipec6099]

Good info and excellent shooting.

[@mirglip3131]

AMAZING shot!! Wow.

[@michaelfunk5951]

Mount it higher up the tang then the sight is recessed deeper and more stability plus a little more range if you top out again.

[@chrisleader2863]

What is in the spray bottle? Mixture ratio?

[@benjaminjarrett9816]

How heavy is the bullet you’re using?

[@michaelfunk5951]

I have both of those and both of the TC peep sights.

[@bradrichaud6533]

What weight of bullet were you using in this 500yd shot?

[@jontomas8895]

Love the the videos. What rest set up do you use?

[@kipleyholbrook850]

Do u know the speed u are at the muzzle

[@thompsonjerry3412]

Do you consider these good hunting sights, or would you stay with the original?

[@sailorjohnboy2325]

Another great video! Can you do a video on how to do the calculations for long distances. Thanks

[@joshmatty1077]

Do you have a email Sir. I have a few questions on sights. I picked up a pedersoli Missouri River Hawkins 1:24 twist deal and would like to get out to 300, 400 yards, hunting wide open country here in New Mexico

[@richardjones990]

Williams FP Hawken