56 egg Incubator review part 4

[@cpolancogonzalez1058]

I found your channel looking for some info on this incubator. I’m getting mine tomorrow and I wasn’t sure about. I don’t do good reading instructions. Thank you for the tips I’ll be sure to get some foam for the corner. Thank you

[@misteradrian87]

How are parameters in the CA "calibration settings?

[@hannesscholtz621]

Hi All. I need urgeny assistance. I dont have the incubator manual and the humidity metwr keep on flashinv, and the machine do not turn the eggs automatically. Please assjst with any help. Thank you.

[@IBkeeping]

@@hannesscholtz621 kzbin.info/www/bejne/nIXHp2BpZ8Rkqrssi=G-Itm3k9-ScL3fAs I hope this helps

[@johnrambo1349]

How this incubator working for you? Ppl keep saying bad sht about this product. Mostly just stupid ppl complaining. Which is sad. Not very helpful for folks looking for a decent incubator to hatch some eggs.

[@allwingsoutdoors4612]

how did you get your incubator so clear without water droplets on the top hood

[@IBkeeping]

It never did have alot of condensation on the inside. Even when I added water. Could be because temperature outside was more equal to inside. Good question. Not sure. There was a little crack on the side where my thermometer wire was. The fan may have pushed the moist air out.

[@cactusroseranch2]

AllWings Outdoors probably because these units never have a completely tight fit.

[@ww-xt3sv]

Is it good how many u have from all 56 eggs?

[@priscilla6827]

Would you suggest this incubator for someone looking? I’m looking, and care across it on google so I came over here to KZbin to hear reviews. ☺️ I have one but no egg turner, and for the price of the egg turner I might as well just buy one that already comes with the egg turner

[@IBkeeping]

Priscilla, thanks for watching my video. I think there are better incubators out there than this one. I cannot recommend this one respecting the people who have reported negative responses. I have heard overwhelming information that it is unreliable. I even had another one sent to me because the first one wasn't working. Keep up bible reading. I appreciate God's word. Take care.

[@azhardiansyahanuar8148]

mosture and temperature set to 38 and 50?

[@andrewhagelberger5139]

So all in all how do you like this incubator? Worth the money or spend it on a different one? Is it good quality?

[@IBkeeping]

I feel it is a toss up, the concept is awesome. The quality and reliability of the unit is getting bad reviews. If they put this unit out with the goal of longevity I would say buy it. My final decision is, I wouldn't buy this one again. The manufacturer is sending garbage to their customers. This is my second unit because my first one also stopped working. They did replace it though.

[@andrewhagelberger5139]

smokeybee thank you ! I work 87.5 hours a week I really don’t have tome to mess with one that isn’t dependable

[@IBkeeping]

I totally agree with you. Our time is valuable for sure. I'm glad you took a look at my video. Take care. Thank you.

[@andrewhagelberger5139]

smokeybee thank you for the time you put into the video! Help me out alot

[@IBkeeping]

My pleasure. Its rewarding to me knowing it has helped someone.

[@lmjohnson84]

You should take the eggs out of the turners two days before they are due to hatch. It can be dangerous for the chicks to hatch in the turner

[@IBkeeping]

I totally agree. They started haching on day 17. Expected day 21. I think that is a good idea. Thank you.

[@warzawapillars]

dont you need to make some ventilation holes in the plastic ?

[@IBkeeping]

It's not an air tight unit so it does provide some ventilation. Not much though.

[@warzawapillars]

@@IBkeeping ok. Thx

[@lidiya2526]

What temperature did you set it?

[@IBkeeping]

97 to 102 f I think.

[@cactusroseranch2]

Horrible incubator, will go out when you least expect it causing 100% loss, I lost a incubator full all 56!

[@cactusroseranch2]

Kimberly klmo first batch total loss! After about 10 emails I’m sending it back. Supposedly they SAY they will refund. We will see. But all of these have problems with a loose connection where it plugs into unit. It is not a proper fit. So it came loose went off killed the chicks inside of eggs!

[@jesussaves6422]

I have one.. I love it.. working great !!

[@cactusroseranch2]

Kimberly klmo I just bought it. It was brand new. I have now contacted seller and returned it back. I SURE didn’t want it It would work then just “Go off” I believe it was in the plug where it plugs into machine. Very loose plug!! In fact like it wasn’t made for that inlet, loose and wobbly. When you least expect it it will get the least bit unplugged or something on its own then go off! Mine happened to go off in the night which let nachine get cold and chicks died in the eggs...😢😢

[@joanneramadan390]

You know you are ment to take out the turning unit on day 18

[@IBkeeping]

Yes. I'm not sure if the comment history is visible. I have had a few very helpful viewers educate me on the topic. I appreciate the feedback. Keep them coming. Awesome.

[@rachaelknight8048]

how can you do a reveiw on that incubator when u ant a bloody clue how to use it

[@IBkeeping]

Sometimes we reviewers are simply showing what worked for us. I didn't see a lot of reviews on line for this when I purchased it. I guess I agree in part on your comment because I never owned one like this. I did use it according to the very simple instructions that came with it. I hope my review has helped others on what to do, or even what not to do. Thanks for your response and I appreciate your feedback.

[@IBkeeping]

Have you used this device? Maybe you have some good ideas that can help the community on this. I welcome all positive and constructive ideas.

[@rachaelknight8048]

@@IBkeeping no he is reviewing that incubator when all his hatch rate has gone to cock because he is still turning on lock down

[@rachaelknight8048]

@@IBkeeping yea stop turning on lock down take the turners out and place eggs on bottom

[@IBkeeping]

I have to admit, they didn't mention removing the turners in this model at all that I received and after your comments they will be removed whenever I decide to use it again. The lack of legible instructions on this unit is unexeptable. Besides you are absolutely right. I had done a lot of searching before running this and I never came across removing the turners. Thank you for your feedback. Clearly my video is an example of what not to do.

[@jacowessels]

Humidity is to low!!!

[@IBkeeping]

Don't go by the machine display. I was chasing humidity a lot. I had a secondary humidity display. Added a squirt of water and it was too high. Thanks for commenting. I have been seeing bad reviews on this incubator because the display is not accurate.