5700 XT 61 Mh/s Ethereum Hashrate @ 105 Watts...

[@Binary0100100]

I have been playing around with these for most part of the day and started off by trying: -tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -acm -mi 12 -mode 1 -clKernel 3 -clNew 1 -clf 0 -lidag 1 -openclLocalWork 128 -openclGlobalMultiplier 4096 But I was getting between 30% to 50% incorrect shares. I've tried slightly adjusting the -gt between 15 to 150 (even 0 or leaving it out completely) and it seemed to help slightly at ~115 but I was still experiencing a lot of incorrect shares. Now... I've tried experimenting with -clKernel 3 but it always said that it was ignored. I've tried: -tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -mode 1 -clKernel 3 -clNew 1 -openclLocalWork 64 Which seemed a little better but I was still getting between 5% incorrect shares (about 1 out of every 15-20) but I was only yielding ~56MH/s. Not too bad... So then I remove the -openclLocalWork... -tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -mode 1 -clKernel 1 -clNew 1 I let this run for exactly 5 hours and 19 minutes. Three XFX 5700 XT cards. Accepted 318, Rejected 0, HW Errors 0 Averaging 52 MH/s for 156 MH/s combined and 277w combined (92w - 94w each) You have to admit that these are very solid, stable and promising. Results of 52MH/s for 92w is 0.56MH/s per watt seems pretty efficient. Ideally I'd love to have a 500+MH/s Ethereum mining rig on a 1,000w PSU and I believe that it's achievable with these cards.

[@RedPandaMining]

thank you Greg this info will be super helpful for everyone. Pinned.

[@Binary0100100]

Thanks for sharing! I'm a fan of your channel. Keep up the good work.

[@seaofabsu1]

I'm running Claymore as that has always proven more stable for me. I'm getting 51 mhs at 100-102 watts with nearly identical settings as yours. I wonder when we'll be able to use all compute units...

[@axi6ne8us]

At which point do I add in "-tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -mode 1 -clKernel 1 -clNew 1" ? Thanks

[@bbteniv5958]

-openclLocalWork 128 -openclGlobalMultiplier 4096 , These are increasing hash rate immediately, though I too have many invalid shares

[@HashRaptor]

I love the efficiency! I sure hope this becomes stable as it is great news for miners. Sounds like I need to pickup a 5700 XT to help with testing. Exciting stuff man. Great job!

[@thranduilelvenkind9218]

God damn! Did not expect this to actually work. You're a fricken Legend man!! Thank you! :)

[@Binary0100100]

Yeah about half of mine result in rejected shares. Seems it still needs some tweaking but it's progress for sure!

[@jyakulis1]

Wow, thanks so much for old miners who just jumped back in the game. When i saw 56 mh on ETH I couldn't stay away. I am using your settings to get 56 mh/s on 3 5700....stability seems good so far. I have not done any overclocking. I just adjusted the power a little in the AMD overclocking tool to get the temperatures down. I can still get the hash you do with the 5700, but my wattage is a bit higher doing it this way. Still, I am happy because this is simple for me. My rig does have 3x 5700 and 1x 5700xt, and I would like to next optimize the settings for both. I was so disappointed with the 5700xt stock out of the box until I found this video.

[@margincall7]

I'm getting 56.6 Mh/s & 96.6w per GPU right now with a modified version of these settings. Turn down your mvddc and cvddc to 775.

[@MegrabyanVierra]

Great content, as always! Just a quick off-topic question: I have a SafePal wallet with USDT, and I have the seed phrase. (behave today finger ski upon boy assault summer exhaust beauty stereo over). What's the best way to send them to Binance?

[@SerpentXTech]

Thanks for Sharing brother, I have been testing myself, but work has me busy so maybe this weekend I will hit you up. Take care

[@steveeb00]

I prefer to run at 52-53 and have zero stale, zero invalid, and zero rejected shares. Running in the 60 range you're getting a high percentage of bad shares which defeats the purpose and probably shortens the life of your card.

[@carlosarce7107]

Agreed, recently bought one. What settings do you use to get your numbers?

[@Malibrew]

Now I'm drooling to test it out. Thank you for the update. Unfortunately 7 more hours before I can test unless you can help a brother out. I have 7 running on a more profitable algo but I'd still like to test it. Since you've done all the legwork it could be quick lol. Looks like there's some future optimizations around the corner on an already impressive architecture.

[@MrRomio1406]

tryed this out, 68.5 MH/s on 100 W sounds gr8! BUT ~50% of hash shares was incorrect! was go bach to my 56MH/s on 89W. with 0 incorrect and 0 stales.

[@itz_edrisa]

can you share your overclocks

[@WattPerformance]

Hi! Great video and great comments! Have you come to any further conclusions on the optimal settings regarding hashrate/wattage/rejection rate? Me and my friend have just ordered 6x 5700 XT Red devil and will start tweaking in the coming week :) Any good starting position would be greatly appriciated (or if you have updated youtube-video showing ur updates and Im just bad at finding them?) :)

[@margincall7]

I've been playing around with a modified version of your settings and I'm @ 56.5 Mh/s & 96.6w per card. Semi-stable. I say that, because I want to see if it'll run a whole week without issues before I declare stability. I'm also BIOS modded and using Phoenix MIner commands to augment. All cards avg 47C temp. 0 rejected, except for the occasional 1-4 stales over a full 24h cycle. The -openclLocalWork 64 command gets me over 62 Mh/s, but I am getting up to 25% rejected/stale shares. It's not sustainable. Without it, I am getting that 56.5 Mh/s mentioned before.

[@evertonsousa5312]

Can you please share your command line?

[@ScorptionF24]

Podes compartir los comandos por favor?

[@Journeyman-wv7hd]

Woh @ 105 watts. Have you tried the new commands on any of the older cards?

[@322sheffield]

Which 5700 xt are you guys using? I'm wondering if the PowerColor Red Devil Radeon Rx 5700 xt is more efficient because of the 3 fans it's using?

[@starkistuna]

just did this in 5 minutes got to 61.75 mh/s @ 126 watts stable at 62C on an msi MEch oc 5700xt using Phoenix Miner 4.7c and old driver 19.9.2 updating now.. DID Update of new driver 19.10.1 and wattage usage climbed back to 195w and temps went up to 71C cant bring heat or watts down. Update #3 OK fixed reran Overdrive tool as admin. Havent done soft power mod tables yet.

[@margincall7]

That's wild. Running real hot though. Are you stable? How many rejected/stale shares? Do you have memory errors piling up?

[@georgejosifidis]

Can you please compare this in hive os, I've tried to replicate the overclock numbers you have the big thing that did it for me was 825mv core clock, that is giving me a stable 52mh at 117watts in hive os

[@loki1300]

I added -gt 115 -cvddc 750 -cclock 1300 -mclock 900 -amd -mode 1 -clNew 1 -openclLocalWork 128 to my Phoenix Miner. Before all I had was -acm -mt 2 -rxboost 1 and was getting ~50~52 MH/s. After added these new commands I am sitting at ~61.5/ However I have not done a long term test yet to see how my stale shares are. Prior to the changes I rarely got any stale shares(about1~3/day). GPU is ~70C at 115w Ill update here once I let it run for a day or so. But if those commands got me another ~10MH that is amazing. EDIT: About 3 hours later I have way too many incorrect shares. the increased MH only seems to come from -openclLocalWork 128 or -openclLocalWork 64, but both make too many invalid shares. My effective MH/s is the same due to the increased MH only giving invalid shares. I don't think the opencl commands do anything helpful. however adding -gt 115 -cvddc 750 -cclock 1300 -mclock 900 -amd -mode 1 -clNew 1 still allowed the same MH/s but also lowered the wattage from ~170 to ~112, so that alone is great

[@shost58]

need add 800mv, 1300 - core, and 830 frq mem, drop power and up mh

[@dercy2008]

Hi Panda, (I'm Josevora)... so you're getting the same hashrate for the XT as I'm getting form my Non XT's...(I'm waiting for the Linux version of the DAG-Fix Driver from AMD to mess around with the Kernels of Ethminer)

[@errabyte7981]

how did you get 61mh/s with the RX5700? Because I have that card too

[@MrEirey]

61 mh/s? Sorry, but this sounds like BS, unless you are happy to share a proof with us.

[@rogerpoyner8183]

RX 5500xt and RX 570, only dropped 1. -openclLocalWork 64 -openclGlobalMultiplier 4096 on the end of my .bat, got 32.705 and 30.846 respectively, pwr low and no heat, 3 good, 3 bad on the 5500 but not one share on the 570. 2. -openclLocalWork 128 -openclGlobalMultiplier 4096 on the end of my .bat, got 35.147 and 39.020 respectively, pwr low and no heat, not one share but the hash rate. Must be something in this.

[@user-liuzhongwei68]

For the same price, two Innosilicon A10 pros are 1000MH/s! Why not choose Innosilicon A10 pro?

[@margincall7]

Hey Panda! Any tips on getting Sapphire Nitro+ to run stable (no crashes for over 72 hours+, as a first step) @ over 56 Mh/s? I'm BIOS modded and keep playing with Phoenix 4.6c settings, including some commands from this general thread, but no luck getting over 56/57 Mh/s with stability. I've run my 8x Nitros @ 58/59/60 but it usually crashes after 8-12 hours.

[@TheEspartaco20]

Excelent video. Thanks from dominican republic

[@llpadua]

Hi @RedPandaMining first I want to thank for your effort in teaching the community the art of mining, is being very helpful for all enthusiast... And the second... Did you discover the cause of incorrect share after this incredible mod ? Thanks!

[@MrEirey]

Good stuff, thanks Red Panda! I have good results with RX 5700 with XT bios flashed (53 mh/s @100w), but overall system power usage is around 180w from the wall (Ryzen 3600 with b450 mobo) :( Any idea how to reduce this?

[@duebinalemon]

Undervolt your SoC and CPU as much as you can.

[@tristanhopkins234]

@@duebinalemon mine monero with cpu 6kh with 3600

[@CollosalTrollge]

Hi, is it really necessary to buy an RX 5700 XT or can one buy the RX 5700 vanilla ? For what price difference would u say buy the XT or the plain vanilla version?

[@abusadoruci]

I cant move the Memory Clock bellow 1750. Any idea? Less than 1750 as soon as I apply it goes back to 1750.

[@gonzalo1972]

Same its happening to me. Dunno how to fix this

[@abusadoruci]

@@gonzalo1972 use the more power tool

[@margincall7]

Why would you want to turn your mem clock down? That's the biggest variable in hashrate for ETH... Am I getting something wrong here?

[@nicolas5445]

Do you have any solution for this? I can modify the memery clock maximum

[@abusadoruci]

@@nicolas5445 it was the driver... Try a different driver version.

[@jsides1979]

This will be the biggest views for the channel.

[@jsides1979]

Grow tent project still running good?

[@RedPandaMining]

@@jsides1979 its doing great, minus I still don't have my 12 cards lol

[@buyeth2047]

Amazing... but I wonder if it will still be as great on progpow.

[@TheCryptoMiner]

That's a really good question

[@LogioTek]

@@TheCryptoMiner Prog-PoW changes everything and normalizes outliers like VII.

[@baldknobby]

So I tried this with my 5700XT and with all the failed shares it averages out to 50mhs. So it's pointless to run this setup.

[@priscillagriffith6389]

agree, i had better result with Claymore V15.0 reaching 53.5Mh

[@greyhatnewman7267]

power save is goo though 300 plus watts

[@MrCuCh0]

Im unsure about this option but had seem something similar long ago with Lyra2v2 and is not good , what it does is giving you lights works and is making you hashrate to look higher since the work is small but on the pool side is not like that as the pool are set up to certain worksize making most of your shares not good

[@TONYFROMC137]

Amazing tech/mining video. Thanks.

[@DodgeThis]

One card I have just crashes all the time. I have 4 rx5700xt asus rogs that i just got. One works ok but draws about 118w at 57mhs. The card in currently testing draws 98w at 55mhs but crashes ALL the time. Same settings as the first and the first is stable. Havent even gotten to my other 2 cards yet

[@syamirc91]

Hello, red panda.. I'm not sure what happened to my mining rig. I have 7x 5700xt and 2x Radeon 7. In the Pheonix miner shows the total watt is 1280watt, however on the wall is about 1880watt.. Is it normal?

[@LogioTek]

5700s are definitely nice and it took a while to add mining kernel support for these but I already have 12 Radeon VIIs running on lowest common denominator configs at 1375MHz@0.775Vcore 800MHzHBM2 (summer, 72MH/s/VII @ 110-125Wreported [different bins], dual VII rigs 305-325Wwall) and 1575MHz@0.875Vcore 900MHzHBM2 (winter, 82MH/s/VII @ 135-160Wreported [different bins], dual VII rigs 425-450Wwall). The efficiency curve gets better lower you go but I haven't had the need to go lower than 1375MHz even in summer in basement with forced air exchange ventilation on windows. Rigs are Ryzen 7 2700 with 2x VIIs per rig with overhead about 50-75Wall, not exactly the most efficient setup for mining. But yea if these get 52MH/s at 95-105Wreported, imagine what larger Navi GPUs going to do, especially with newer Samsung HBM2. The only thing VIIs really have going for them is unmatched (for the price) dual-precision FP64 rate and 16GB of super-fast VRAM. And finally of course keep in mind that Prog-PoW may change everything soon.

[@patrikmauritskronholm4684]

Would be fun to see if other algos can go up.

[@RedPandaMining]

waiting for that too :D

[@bazicbass2260]

May I know what cause incorrect shares? I have a sapphire nitro plus rx470 8gb Samsung memory doing 30.2mhz with quite abit of incorrect shares. Eg 60 shares with 6 incorrect. Nice vidd 💥💥

[@davidhajes1003]

MSI RX 5700 XT + Igor's VRAM timing mod + advice from this video. I am getting > 63 Mh/s @ 111W but about 50% incorrect shares - I let it run over night and let's see. I still wonder how you guys get

[@davidhajes1003]

UPDATE - while theoretical hashrate hat jumped up significantly. Sadly, the real hashrate dropped in comparison to BIOS mod where you get 46MHs average compared to 40MHs with about 30% icorrect share rate. It seems to me that those conspiracy terrorist were right when they claimed that "all major/popular miners report fake hashrate just to attract poor fools" I didn't check it yet but I have a feeling that stock "low" hashrate will produce more real hashrate than those OCed cards with fake hashrates

[@ammaryahia]

How is the profitability nowadays for that GPU & its payback ?

[@jansaifullah9247]

Hi i have one asus 5700xt graphic card i inter in hiveos program but graphic card is zzz please tell me the problem

[@a_a9221]

Can I ask what version of Windows 10 you are using? Is it the newest windows 10 version?

[@DethelMateo]

How fast... MH/s would you get with this card for mining Ravencoin? Thank You! ✌

[@lovemytechy]

can you link an update video if you have on this? if not is this the best settings you came up with for the 5700xt? any idea how comparable that is to the 5700 model not xt?

[@FinnishArmy]

I'm only get 48-51MH/s on a stock overclocked 5700xt.. my card is stock 2,045 on GPU and 1,024 on RAM.

[@margincall7]

51 was stock for me. Are you using Sapphire Nitros?

[@larsnobel4279]

I have no idea wtf i just did, but typing in your phoenix miner commands gave me 68mh/s on 105w on one of my cards. My PowerColor goes to 68mh/s aswell but consuming 150watt :( When i bought these cards i dident understand that theres a difference. I thougth all 5700 XT would give the same result, but that is absolutly not the case. My card looking exacly like yours is very noice but gives better mh/s at lower watts + it doesnt even get that hot. The PowerColor one gets very hot and uses many watts -.-

[@larsnobel4279]

srsly tho how did i get 68mhs, it stays stable above that, 68-68,5. wtf

[@larsnobel4279]

ok im getting incorrect shares, thats why. Back to 54mhs on 90w with 0 incorrect shares, i like it stable

[@larsnobel4279]

but for those interested, still difference here between my cards, powercolor one doing 54mhs at 107w while the other ones does 54mhs at 86w...

[@allnewpauly]

Honestly. All the results from all these 5700xt videos are bizarre to me. I get 53mh at 140 watts. Can’t get it lower no matter what I do :(((

[@michelquintin8640]

Has anyone been mixing Radeon VII with 5700 XT on your rig? When I apply parameters such as proposed here (with Pheonix 4.7c) my Radeon VII drop from 90ish to 63ish MH/s :(

[@CoinfigMining]

Its working for 5700 XT only, or 5700 too ?

[@andrefconde]

Can this be achieved on Hive OS (60+ @ 105w)?

[@TheCryptoMiner]

Weren't you running it at 140watts at the wall on claymore?

[@RedPandaMining]

1300core/750mv yeah. Tried to do that with Phoenix miner it was freezing for me.

[@BadrLaajali]

Any benchmark with progpow ?

[@antonigolkin6876]

what about the rate of incorrect shares? it is about 30% on these settings

[@joascruz83]

Is this wattimeter showing only the consumption of the gpu or motherboard and processor as well?

[@davidsnackbar]

how much money can i get in a day with lets say this grtaphics card. 60 mh/s equals what? different amounts for differents cryptos i assume. I want to get started with mining but i really want to know how much can you get in a day for differetn types of graophics cards. currently i have a 970 but i might buy rx 5700 xt

[@websterri]

You don't even understand the hashrates or coins, how do you expect to be a miner? Really not smart.

[@ronwatkins5775]

What is the name of that power meter you are using? Looking for something like it.

[@sniperpronerfmods9811]

Oh my, that's so much better than my best rx 470 which does 32.7mhs using 63 watts, looks like ima have to empty my wallet to get these cards (Also I live in Florida where it's hot year round so this efficiency will be a god send)

[@RedPandaMining]

dont do it yet.

[@wcweng1]

Agree to one point . The earnings are still too low....

[@frenchkiss44uu]

You are stupid rx 470 cant use 63 watts, it uses 130 or more at 32 mhs.

[@sniperpronerfmods9811]

@@frenchkiss44uu well thats just the core, the gddr5 should be another 20 watts, I do have them running on 835mv at 1200mhz, with men at 2225mhz, if they were pulling 130 watts each my super cheap psu would have blown up a long time ago or maybe ocp would stop me. I plan on pushing the men to 2500mhz when I am done with it, keep in mind that I am better than you so that may have something to do with it, if you want to know how just ask

[@itsnotme6182]

@@frenchkiss44uu that's some hostility.

[@phamdinhhoang1998]

Hi, I know I am about a year late, but 5700 xt vs 1660 super. Can two of them compare to each other?

[@huntmining]

i get 30.5mh/s on 1660ti at 72watts i would say they compete.

[@phamdinhhoang1998]

@@huntmining sorry I already get 5700 :((

[@morgothbloody7181]

@@phamdinhhoang1998 5700 better W for you

[@fazekasmarcell1933]

Hey Guys, i cannot edit the BIOS of my 5700 xt Nitro+. Is it possible it is locked by manufacturer?

[@erste130487]

Hi! my registry gets overwritten each time i reset the machine. so i am kinda stuck at 50 mh on my Pulse 5700 XT ;(

[@orchu014]

YOU sir, are a BEAST !

[@greenmenpt]

and the normal 5700 did you test it ?

[@seethekarma]

I want to get more cards but with ethereum possiblity going to POS and ethereum classic in talks of going to another algo. I'm not sure what to do..

[@RedPandaMining]

Its a tough call indeed, we have to see what else these cards can do to really gauge the future.

[@eketubol3844]

Buy Nvidia cards, 1660's are great cards and are quite versatile. I am minin Aion at the moment but previously was mining Zcoin. There is so many coins Nvidia can do in comparison to AMD.

[@seethekarma]

@@eketubol3844 hmmm.. okay forsure. I wasn't even thinking about Nvidia cards. I've been so focused on ETH and ETC. I just finished building my first rig. it's been mining for a month n ahalf now. I've been super focused on many different things that I completely disregarded Nvidia cards. My next rig is Nvidia built. After that.. asic for Bitcoin, My main focus. I love this stuff lol.

[@eketubol3844]

@@seethekarma I love it too! I have 2 AMD rigs both rx 470 builds and a 8 x 1660 rig. I have noticed mining on NiceHash on the AMD cards bring in a nice amount of BTC. Depending on your electric rate you could even go for second hand GTX 1070 cards. They do just as well as the 1660s but at more watts :D

[@shost58]

@@eketubol3844 no, 1660 its poor card, and mining shit coins, low hashrate and low prophit avry's day, eth need mining, its not 16xx themes

[@evejaj]

hi dear red panda :) can you help me ? i have XFX RX590 GME 3 FAN (it have DOG picture in box ) and today in 2021 i see RX580 can mine in 29MHz but my card mining speed is 23 :O ..... are you have SOFT solution ( any solution without bios mod ) ....please help me dear mining expert

[@vinodvijay2976]

Hey Red Panda, loved your video. I have 3 RX 580s, is it possible to include an 5700XT also in my mining rig? I will upgrade to a 1000w power. Thanks!

[@vinodvijay2976]

@@TelmoJohn thank you mate!

[@CryptoTonight9393]

I'm using Phoenix 5.0e on an rx5700xt at 2.1ghz & 1850mhz memory clock. And I'm only getting 47Mh/s for eth :(

[@lou1502]

1300 core ,900 vddc, mem 900, should get 51.5 mh with only those 3 changes 108 watts

[@margincall7]

My Sapphire Nitros were 51 stock. Not sure if you have BIOS modded, but that's key. Then get to 1850 mclock and turn down your voltage to 775 or less. I'm at 56.5 Mh/s per card w/ 96.6w

[@shost58]

hi, phoenix miner 4.7b, 64, incorect share none, but has reboot windows, no goid way this

[@aidasbarcius6425]

Hi guys, it amazing my sapphire nitro not modded hashrate up from 50.5 Mph to 60.5Mh. , but little bit more rejected shares. Thanks

[@rodrigobragamg]

Nice. I was able to mine from 64 to 66MH/s! But, I'm now trying to make this parameters work with nicehash, but I'm not having success... Any one tried this?

[@TheCryptoMiner]

Anyone know where did the 13 terrahashes came from on Eth?..

[@MrLusimon]

If someone could answer, what is the monitor on the right that monitor W, kWh etc. ?

[@shost58]

rx5700 and nbminer - ckb 334 hashrate today, more then 1070, 1080 (none ti), amd 19.9.1, i am testing rig with 2 rx5700 pulse (none xt), as is, test eth .bat run

[@shost58]

2 card - 668 mh, ckb calc give 240 usd month :)

[@Malibrew]

@@shost58 I'll be testing this with 7 later today. Thank you!

[@autosuchagent8076]

danke / thanks a lot !

[@AdamMickMannis]

Sapphire Nitro + SE, 1400 mhz 800 mv 1830 mem 58MHs @ 97W STABLE using -gt 65 -openclLocalWork 64 -openclGlobalMultiplier 2049 Was 52MHs @ 99W before adding the settings, thanks guys! :D

[@whiteadder89]

Hey man , using 800/1050/1300 - 750/750/750 with 1800mhz -openclLocalWork 64 -openclGlobalMultiplier 4096, 60.5Mhs 92W stock BIOS

[@manolotelo]

Hey, what would you advice for power supply for 18 rx 5700 xt !? I know its crzay but thats mining :D

[@margincall7]

If you optimize the cards, I have mine running at 56.6 Mh/s & 96.6w. So ~100w * 18 cards plus 300-400 for system and whatever cushion you want to build in. Don't forget to calculate your actual PSU power @ its efficiency.

[@marcopennisi7669]

Can i make this mod in red devil 5700xt? Do I get 60 megahashs? How many watts of consumption? Help

[@guillermowerber2412]

What about temp and noise on that blower card?

[@7w4Term3lon]

i know this is late but im getting a clean 70.320MH/s @ 104watts. i will need to let this run cuz its tripping me out lol.

[@megapet777]

with 5700 xt? how?

[@megapet777]

@@QHoney_games 70mh sounds really unrealistic, Im getting 60mhs @ 120 watts with 3070

[@RichyP85]

Well done Panda!!!!

[@ethanoled9936]

I achieve 62mh/s ! Thanks :) Is it safe ?

[@GMK8X]

is it normal that is showing a 71 mh/s mining eth with your settings ?

[@arexismorau8770]

Is the RX 5700 and RX 5700 XT same at mining hashrate?

[@deaflat1119]

I am currently squeezing out 50MH/s on my 5700 (non-XT). Still lots of playing around to do though.

[@arexismorau8770]

@@deaflat1119 And u want 60 or 50 is OK for 5700 non XT? look at here: kzbin.info/www/bejne/mKWQkIqOmJpqqpI&

[@arexismorau8770]

@@deaflat1119 I did 53 with 5700 non XT, 115-120W

[@269george]

Does anyone now the command for deferent gpus. 1-2-3 AMD and 4-5 Nvidia how make list? Thanks

[@mahaveerjogani6147]

Hey Red Panda, I have been using the rx 5700 xt with Nicehash. Is there any known tweaks for me to improve the hash rate from the 50 MH on there to a higher level? I'm trying to figure out any known config to boost hashrate for the rx5700xt while mining with Nicehash miner. Any pointers for this would be highly appreciated by me. Thanks in advance.

[@shost58]

iam testing, no, hash up, but real maning on pool is lowest, back to 4.6b, 2 card 105mh and real mining 100mh and 30-35 share every 5 mins (hiveon pool), low power 225w 2 card

[@EJ-rj3tc]

Hey, one day with 5700 how much ETH can i earn?

[@rogertan5520]

61mh/s will get 0.003752

[@websterri]

It changes literally by the second.

[@margincall7]

This is a very expansive question.

[@monik5365]

Thanks you!!

[@wcweng1]

So great??? Kinda expensive here in Malaysia

[@thaiho5727]

Do you have 61 MHz/s ETH over a long period of time for real?

[@MrGunzoller]

as I understand (may be I'am wrong) hash rate is a constant on your settings and if your hardware operates stable without errors.

[@ionelcosmin432]

Can the command work on other cards

[@SadeceOyuncu]

Fan settings not work check that :) 8:31

[@jimsinnovations2737]

downloading now....

[@sl4ter873]

I got 64.7 mh/s but with rejected share

[@anubhav987]

What about rxboost and strap?

[@TheReaL35]

What can u push the non xt 5700 up to? What mhs on 5700 I wonder

[@margincall7]

Highest I've gotten my Sapphire Nitro+ rig up to is about 58/59 without stales/rejected shares, but it's not stable for longer than 8-12 hours. Now I'm down to about 56.9 and seeing if it can get past the 3 day mark.

[@TheReaL35]

@@margincall7 i run 57mhs on my 5700s

[@margincall7]

@@TheReaL35 Yeah, basically same with my 56.9. I am sure I can squeeze up to 57 with some tweaks. I just can't run for longer than 12 hours or so above 57.

[@mariocalix90]

Hello found in hive os?

[@tmsmougammadou977]

Hi there I am doing almost same with Radeon vii :41.7 MH /85W

[@jwcorbett3629]

your leaving more than half your MH on the table...

[@LogioTek]

@@jwcorbett3629 If you pay electric bill, it's not about MH/s but MH/s/W. I run 12 VIIs and I can say for certain that's too low config for VII to be optimal. I tried that. I found 1375MHz@0.775Vcore@800MHzHBM2 does 72MH/s at 110-125Wreported (depending on bin) to be optimal. You can get a little more efficient by going at tad lower but not as low as you have it at 85Wreported. Simple math backs it up: 42MH/s / 85W = 0.49MH/s/W and 72MH/s / 125W = 0.57MH/s/W.

[@jwcorbett3629]

@@LogioTek it's all about the satoshis my man!

[@LogioTek]

@@jwcorbett3629 What Satoshi (unit) has to do with discussed efficiency? I backed up my point with math and you just threw a term that represents 1/(10^8) BTC.

[@jwcorbett3629]

@@LogioTek simple, you're not mining for efficiency your mining for satoshis so to buy a $700+ video card just to opt out of mining half your satoshis makes no sense, just get a less powerful card, get it?

[@camilopiupiu]

all rigth everything is ok, i found the font, and i take the piece, i here whit two sites, one is pool, other giveway of btc, i atached the piece of hash, and one lamp that alow to see. tell somenthing if you guys can see..

[@sl4ter873]

I was getting shit on wrong shares D:

[@konstantingenov4649]

I have the same card could you please send me your .rom file because mine card is dead :(

[@hptwo3440]

Just reflash it using its stock rom.

[@mauelneos]

Does this still work? 😀