99 Problems And The Avalon Nano 3 Has All Of Them

[@polli3578]

No issues at all here.. just put in on ckpool and your set.

[@TheReaL35]

Ck and luckymonster here..0 issues

[@canaan6966]

Thank you for bringing this to our attention. The variation in the instantaneous computing power shown in the mining pool statistics reflects the submission frequency of the machine at different difficulty levels. The 4T computing power you see depends on the mining pool's 24-hour statistical computing power. To clarify, the machine's performance is best evaluated based on the mining pool’s 24-hour average, which provides a more accurate measure of its consistent computational power. We recommend sharing this information with customers to help them better understand and assess the machine's capabilities. If you have further questions or need additional clarification, we're here to help.

[@BlueBearCrypto]

I understand there was a difficulty issue with the mining pool causing the drop outs. Is there any fixes lined for issues switching pools and showing 0ms in the GUI, also not being able to change pools within the app? Also the latest update causing the nano 3 to not want to connect to any pools? Cheers

[@jasonkidwell1767]

@@canaan6966 they didn't even answer a single question you asked that is totally a chat gpt response wtf!!!!

[@BlueBearCrypto]

@@jasonkidwell1767 😂haven't seen chat GPT be used as an insult but that actually made me laugh out loud

[@Jm-my1rd]

My Avalon Nano 3 network status 0ms! Can someone help me? I update the software and reset to factory setting and still said Network Status 0ms. it's a $300 device wtf.

[@patrickpfeifer9008]

I am also runninng 2x Nano3 boxes everyday on ViaBTC pool mining BCH. I do not have any of the mentioned problems everything runs perfect. They are running in medium hash mode . High hash mode also works but i am a little bit afraid about the temperature of the boxes in this mode and the fans are getting also louder.

[@N1NJAKIDD]

You know it's designed to be a space heater right? Don't worry about the temps, it's designed that way dude😂. I've run mine full whack at 90c for about 2 months now in the summer. No problems at all.

[@nanitensona]

Could you help me out with the pool details

[@oliverdjukic6725]

@@nanitensona just use NiceHash Pool , your Mining adress is the worker Name and the Pool adress ist the ssl\\ link

[@DouglasHeyen]

The major swings in variance is due to its low hashing speed. You may get only one share here and there which is why you see the spikes in stats. See if you can set a static diff. you aren’t looking to submit shares in a solo pool. Only thing you want to submit is blocks and that would prolly be at least 50 years for a 100% diff block. You get unlucky and it takes longer than you have on this earth.

[@Oresti-007]

Depending on your network configuration and on your ISP provider, it could be the firewall interfering with the devices traffic just a thought. I ran into similar issue while I was troubleshooting a clients network.

[@sizweshezi4441]

Got a fix?i think my isp is being lame

[@Jm-my1rd]

my Nano 3 Network keep saying 0ms and in red. Need help!

[@RainBitcoins]

Yes wifi connection issues is a known one. But the fan speeds or overheating issues are not known issues, don't know where you got that from?

[@CheapCharlieMiner]

I have 2 and one of them i have the same problems. Always disconnect and come back.... I have no idea whats going on !

[@pboro1jawrattler]

I hear you are from the uk, where did you buy the miner from ?

[@BlueBearCrypto]

Got it from the official Canaan Indiegogo page

[@HugoAlexandreCruz]

Sorry for your experience! Be Brave, Do you know what batch of production was it? When did you received it? if it´s ok to reply. Thank you

[@PaulLittlefield]

Try Braiins pool. My Avalon has been fine with them, no drop outs. I do have an update to do on my Avalon but it won’t take. What was that other miner you have just next to your Avalon?

[@BlueBearCrypto]

I've had a load of great suggestions for things to try so I'll go through all of them see what works. Will then make a follow up video. Really appreciate yours and everybody else's advice!

[@Stefano-cp4xw]

The miner next it should be an Iceriver KS0 pro

[@BlueBearCrypto]

@@Stefano-cp4xw yes sorry. You're right Stefano!

[@jeffnieb9840]

I’ve been running mine on mining-Dutch pool and I’ve been running it multiport solo just for fun got it today so I’m just testing it out and curious to see if I hit anything

[@Alice-zm3du]

iam kind of confused because my unit somehow disconects from the network and its on 0 ms and in the red no idea how to fix this btw

[@BlueBearCrypto]

Try a factory reset and keep changing it to different pools and leave them on for 15 mins or so each time. Mine just started working on lucky monster so I'm leaving it on that now

[@dominikkessler4572]

If u run ur network on vpn it looks right like that…i got the same problem and going to use the network from my neighbor…he aint got any safety features 😂

[@YoutubeShorts_Salonbuzz]

Once i set My Nano at BCH solo mining pool , it call me reboot. After reboot those fans dont work and say is too high temp need me turn off. How to fix it ?

[@Noxxid]

Mine never worked since day 1. Starts up then turns off after 30 seconds. Suspect it’s overheating. Any ideas what I can do ? Should I send it back ?

[@BlueBearCrypto]

So I had to reset it multiple times and try lots of different pools before I found one that worked. Try that and send it back if it's still not working. Mine's currently stable but I'm scared to touch it or make any changes as it was so much effort to get it working

[@BillAnt]

Like the Jay-Z song "Yo I got 99 problems, but the Avalon ain't one!" ha-ha

[@BlueBearCrypto]

Glad somebody got it lol!

[@potcher222]

Hello, I’m facing a technical issue. Can’t connect to my WiFi the nano 3. Can you plz help me, really appreciate any help. Thnx

[@BlueBearCrypto]

@@potcher222 join the discord and we'll give it a try!

[@wednesdaybytes]

Buy a bitaxe hex and review it😊

[@mentalmininguk]

Mine has been on CK Pool for just over 2months, running in high mode. Now im having issues with it just over a day mining, it drops off stops mining and cant connect to the miner itself. I have to turn it off and back on. Also, the fans have gotten noisy sounds like the bearings are on their way out or something, lol.

[@BlueBearCrypto]

It's fine when it's running happy but yeah it does seem to have these odd tantrums. Fingers crossed mine is in a happy place mining away but the fan getting noisy is probably going to kill it quickly as they already seem to have heat issues if they're not getting great airflow

[@mentalmininguk]

Yeah, I've noticed the airflow isn't great. The fans are rubbish. I'm tempted to maybe modify mine, lol. Fingers crossed yours stays trouble-free 👍

[@BlueBearCrypto]

@@mentalmininguk thanks man. Would make good content if you can whack some better fans on it!

[@mentalmininguk]

Yeah, definitely, mate. I'll have a look to see what I can find. I will make a video of hopefully a successful candidate, lol.

[@Stefano-cp4xw]

Great video, I was not aware of the problems with the nano 3.

[@BlueBearCrypto]

Thanks man. Got some homework to do to see if I can work around the issues!

[@nanitensona]

Anyone know how to hard reset… mine won’t connect to WiFi…

[@canaan6966]

Press and hold for 8 seconds to restore factory settings. Refer to the instruction manual for more details.

[@يوسفالمهاجر-ز8ي]

How much earnings aday ? Everyone describe the Avalon nano 3 but without mentioned the earnings. Could you please tell us

[@BlueBearCrypto]

So the earning mining on a pool with others is very low per day, people "solo mine" on a pool meaning they have an incredibly small chance of hitting a block by themselves, but if that happens you get big rewards, so it's not something that is going to reliably make money, just gives you a small chance of getting a nice win

[@يوسفالمهاجر-ز8ي]

@@BlueBearCrypto I want rewards everyday constantly I don't want to wait until I get lucky or broke. I can only mining ⛏️ Bitcoin with Avalon nano 3 or other coin's too ?

[@josepmartinez9026]

I have seen that in the 2miners pool ALL miners that are below 32 th/s have performance drops to 0 th/s continuously. I think the problem is not our nano. The problem is the pool. The same thing does not happen to me with other pools. In fact, my wonderful BitAxe supra doesn't even sync with this pool. I guess being below 1 th/s it doesn't deserve your attention. Excuse my English.

[@BlueBearCrypto]

I think you're right about 2 miners. I think the difficulty for each miner is too high so there's times when the nano 3 doesn't push any shares through. I've sorted this and locked the difficulty on a new pool so it's as stable as you can get it now. Update vid coming soon on what I've done to keep it as consistent as possible

[@josepmartinez9026]

@@BlueBearCrypto I subscribe to your channel and wait for that update. Thank you very much for your contributions.

[@soopercolt45]

I make 222sats a day on medium. If you are a hodler and believe btc will be worth 1M$ even half a million makes that 111$usd a day.quit your complaining. Its a 140w heater most heaters are1500w. Buy some canaan stock!

[@robbytrue1638]

which pool you are on?

[@btc_rat]

What pool?

[@StellarStoic]

It's your wifi not a miner. Canaan blew it they didn't include Ethernet connection. WiFi connections can be unstable.

[@whn1985]

I have 4 and none of mine have drop offs like that.

[@sixtyinsix]

Retro Mike might be this guy: www.youtube.com/@RetroMikeTech/videos Learned how to mine Verus on cellphones from his videos also great tutorials.

[@CryptoMykel]

It is indeed😉 RetroMike is King!

[@DouglasHeyen]

It’s a gimmick miner nothing more. You can set it to a pool with a very low share difficulty. Something like 2048 or 4096. That way you won’t have massive swings in stats and you can monitor it better that it’s doing something.

[@marcopagliacci]

I think it is your model... Mine is running smoothly with no interruptions at all

[@BlueBearCrypto]

There's a good chunk of people with problems and a good chunk that are running fine, so it might be part of the problem that certain batches are just not as good

[@1brokkolibaum]

I have 4 nanos and there are no problems at all running 24/7 on high using viabtc bch pool 🤔

[@BlueBearCrypto]

There was a lot of teething issues at the start but it's been running fairly smoothly a short while after this was posted

[@SKYRIPPEL-SKPlSandra]

und schon was gefunden?

[@BlueBearCrypto]

@@SKYRIPPEL-SKPlSandra not yet!

[@brett6299]

Minus had nothing but problems. I've sent it back twice now. Waiting for it to come back. Out-of-pocket to send it to them too. Which is sad what's that

[@BlueBearCrypto]

They charged you to send it back? That's mad!

[@briansteinway5026]

Mine has bad issues connecting also .. got it to connect one time but no luck since... This thing is a POS and very frustrating ...

[@BlueBearCrypto]

Try a few different pools through the GUI if no luck reach out to their customer service

[@jasonkidwell1767]

Hey man that stinks your having problems with the nano again mine sometime shows the wifi logo as not connected but when i check the pool it says connected and my router says connected as well i think maybe its a software issue and i never got a update on my app if i do ill be sure not to update untill i know canaan has fixed said issue

[@BlueBearCrypto]

It is what it is at this point. It's currently working so I'm just leaving it alone at this point!

[@jasonkidwell1767]

@@BlueBearCrypto have you contacted Canaan I'm curious if there aware of this problem or are they working on a fix

[@BlueBearCrypto]

@@jasonkidwell1767 No. I will reach out to them to see what they say!

[@jasonkidwell1767]

@@BlueBearCrypto I'm sure they haven't responded but I'm just checking if you have heard anything from canaan

[@canaan6966]

Hi there. We are sorry to hear you are having issues with your Nano. Were you able to get your firmware update?

[@geraldringe4439]

I had my ethernet via the back of the Sky Q box and I wonder why there was a drop out for 30mins to an hour overnight. This was happening sporadically. It turns out that Sky updates were happening causing the loss. Doh!

[@BlueBearCrypto]

Nightmare! I wouldn't have thought that nano 3 would use enough data to stop working if other things are updating. Glad you sorted it!

[@BEN_O_Ng]

How do you connect ethernet to Nano 3?

[@ItsEdSilha]

I’ve had zero problems and no dropouts with my nano 3 🤷🏻‍♂️

[@ObsidianXXX]

Which pool?

[@electricbloke]

I've just been through something the same with my Nano 3. I tried 2miners after I saw you using it, and found that I was getting crazy highs, and dropping out completely, so I went back to solopool and it ran at a stable #rate. I had problems when I changed pools on the GUI, had the red ring, and found that by changing pools in the phone app instead, it solved that problem. My second Nano keeps losing it's GUI, and a green light comes on inside when you look in the front grills. It still uses energy as though it's #ing, but it doesn't seem to be on my network 🤷🏻‍♂️

[@BlueBearCrypto]

It's so weird isn't it! I also noticed when it wasn't properly connected to a pool it was still showing a hashrate it was supposedly doing and using power. Did my nut in

[@electricbloke]

Same here, frustrating isn't the word! I have that nano on a segment timer now, it just kicks in for a few hours while the sun is on my very limited solar system, then it gets a fresh reboot every day.

[@scannerdnb1612]

i got 4 nanos never had a problem

[@mave4456]

Just grabbed one payed the higher price unfortunately hoping to hit a lotto win

[@69repsol]

I have 3 Avalon Nano 3's, and they have been flawless from day one. This is called user error.

[@ObsidianXXX]

Which pool?

[@mustbee-bike994]

beautiful this is the only video on KZbin telling the truth about this piece of garbage

[@BlueBearCrypto]

There were loads of teething issues at the start but it has since stabilised now, been running nicely on high mode since, just took a while to get there!

[@soopercolt45]

Canaan is at all time lows. How can u mine and not see the the bigger picture about btc😂

[@produktas]

if product is markened as heater, expect other things are just features attached to heater :D

[@BlueBearCrypto]

Not many people would buy just a "heater" for £100 though. If the additional features aren't reliable then it should cost the same price as other "heaters" based on their output

[@frzzr333]

better to just mine solo. im getting 4 th consistently, and i finally hit a block after 2.5 months…truly a lottery

[@BlueBearCrypto]

Well done!! Very impressive 😎

[@marcopagliacci]

Screenshot or It did not happen 😊

[@BlueBearCrypto]

@@marcopagliacci I like to be the optimist but a screenshot would definitely seal the deal!

[@Mr-Spook-1971]

you are correct the nano is not worth the money to buy or run as it's low and inconsistent hash rate, and the very low chance of hitting a block.

[@BlueBearCrypto]

It's not looking good at the moment but hopefully software updates can improve the reliability

[@witness1013]

This whiny dude is crying about a $99 HEATER - loooool

[@Milkmanx1]

I don't have a nano but I would suggest kano.is. it will start you at 442 different and work you up to a stable level.

[@GetRevved]

Solo mining with mine on LuckyMonster and seems to be working fine so far. Only on low mode atm due to the heat but so far so good. The update also worked fine for me 🤷‍♂

[@dnog1999]

No luck for me. Both my Nanos are not connecting to any pool. One did connect to the US BCH pool of 2miners briefly but nothing since then. No-WiFi-Symbol stays on continuously.