[Solved] Bevel Not Working? Fix it with 3 Easy Tips | Fast & Correct Method | Blender Eevee & Cycles

[@5MinutesBlender]

If you liked this tutorial, please consider making a small donation, it will help us! 𝐘𝐨𝐮 𝐜𝐚𝐧 𝐬𝐞𝐧𝐝 𝐲𝐨𝐮𝐫 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧 𝐡𝐞𝐫𝐞 👉 donorbox.org/5-minutes-blender

[@Braveclean]

After being frustrated for hours on why the bevel wouldnt work, This particular tutorial worked. The explanation is amazing

[@5MinutesBlender]

Really glad that it helped 😊 Cheers! 💝💝

[@rimlingerlorenz62]

You're the goat man this bevel was making me crazy and the solution was so simple THX A LOT

[@5MinutesBlender]

Glad it helped! Cheers bro 💝💝

[@customsandexotics1689]

Great Bevel Fix Video!!! Of all the videos I found and watched on fixing bevel problems, this is the ONLY one that actually got me to fix my bevel problems of angles going all over the place! The "Normals" part where you show how to check the direction of the face was what I needed, I didn't even know about this, and it got me to fix all my faces and now I can bevel and edge properly! Thank you!! I also by accident clicked on "Face Orientation" under the "Overlays" dropdown, it made the faces red or blue which gave me an even easier visualization of my faces Normals' direction and which to flip! Made it easier.

[@5MinutesBlender]

Thanks 💝💝 Yes, the Face Orientation option helps even more 👍

[@ypietrw]

i was stuck for so long its embarrassing. thank you for the video!!!!!!

[@5MinutesBlender]

Glad I could help! 😊

[@FunkGen]

You are legend. You saved me from giving up on learning Blender

[@5MinutesBlender]

Glad I could help! 😊

[@ekoeschannel140]

Every time I have an issue with bevel I think to this video..Thanks 👍

[@5MinutesBlender]

Glad to help 😊💝💝

[@끊임없이공부하라끊임]

Thank you so much. you are my hero :)

[@5MinutesBlender]

Glad I could help 😊💝💝💝

[@ASleep-er]

Now this is a good guide for bevels. Just had some troubles with the bevels and it is now working fine. This is good guide.👍

[@5MinutesBlender]

Glad it helped! Cheers! 😊

[@PravdovaSkronov]

You save my day, thank you!!!!❤

[@5MinutesBlender]

Happy to help 😊💝💝

[@GerardMenvussa]

4:43 you can also tick "face orientation", which might be more convenient for this situation

[@5MinutesBlender]

Yes, thanks for this suggestion 👍

[@edwin9219]

subscribed to your page because this is the second time I needed an answer to something and your page was the one to answer it, clutch thank you

[@5MinutesBlender]

Glad to know that I could help, twice! 😊💝💝💝

[@MikkoRantalainen]

I actually like to use "Face orientation" setting and using 100% transparent color for the normal faces (in interface preferences) and bright red color for the backfacing faces. That way I can keep using that option all the time and I'll automatically get red highlight at any time the normals are reversed.

[@5MinutesBlender]

Thanks for these nice tips! 👍

[@FilmSpook]

Many Thanks, and wishing you a Great New Year!!

[@daniilzverev478]

Amazing video!!! It really made my day better!

[@5MinutesBlender]

Glad it helped you 😊💝💝

[@p.p.7844]

thank you ;)

[@5MinutesBlender]

Glad it helped! 😊

[@knowledge_hub1]

All of them worked !! Thanks for discussing the cause in depth and giving the perfect solution 👌

[@5MinutesBlender]

Glad it helped! 😊

[@lamski3286]

my problem was fixed within the first 3 mins of the video, thank you!

[@5MinutesBlender]

Great! 😊

[@RacletteLynx]

perfection, even after 2 years!

[@5MinutesBlender]

Glad it helped! 😊❤️❤

[@anatolian6269]

gotta be one of the best videos

[@5MinutesBlender]

Thank you so much 💝

[@kauanpsd]

Thank you so much! I'm a begginer and you helped me a lot!

[@5MinutesBlender]

You are so welcome! 😊💝💝

[@FloetschMaster]

THAAAANKS wow this errors got me mad!

[@5MinutesBlender]

Glad to know it helped! 😊

[@spaceblox6494]

Thx so much, words cannot express how grateful I am

[@5MinutesBlender]

You are so welcome, I'm glad that it helped! 😊💝💝

[@Артем-о6у2ы]

thank you for your help, I've been struggling with the last problem for a very long time

[@5MinutesBlender]

Glad that it worked, happy to help! 😊💝💝

[@sillyoldbear5379]

Super helpful, thank you!

[@5MinutesBlender]

I'm happy to help! 😊💝💝

[@enosunim]

You saved my day! This was that normals thing!

[@5MinutesBlender]

I'm glad it helped! 😊💝💝

[@TechWampus]

Amazing life-saver video!

[@5MinutesBlender]

Glad it helped you!

[@fs0c1ety]

Thanks mate, it worked. You earned a subsriber .

[@5MinutesBlender]

Glad it helped! Thanks for the sub 💝

[@vahsirht0717]

Thank you so much for this informational video!!! This helped me a lot to complete my project in time.

[@5MinutesBlender]

Cheers! I'm glad that it helped 😊💝💝

[@hills8220]

THANK YOU HEAPS, just saved 8 hours of work

[@5MinutesBlender]

Glad it helped 😊 Cheers!

[@GingerbreadPanda]

Awesome I was so confused, but this video fixed my issue.

[@5MinutesBlender]

Glad it helped! Cheers!

[@Ahtisham]

It was the scale problem for me, i had no idea what was causing it,i checked the face orientations but thank GOD found the right video,thanks a lot man

[@5MinutesBlender]

Glad that it helped you! Cheers!

[@Ahtisham]

@@5MinutesBlender 👍🏻👍🏻😊

[@michaelmckenna2462]

Absolutly Amazing

[@5MinutesBlender]

Thank you so much! 💝💝 Glad it helped 💝

[@Evander_Ex]

Dude, I'm a beginner boy and you just saved my life =.=' new sub here ^_^

[@5MinutesBlender]

I'm really glad that it helped you! 😊💝💝

[@BorisRio]

Finally found the solution to my problem, thanks for sharing

[@5MinutesBlender]

Glad to know that it helped!

[@sparkiebarkie14]

Thank you! You’re the best, that is all

[@5MinutesBlender]

Thank you so much 💝💝

[@stevenlitvintchouk3131]

You solved my problem with the Bevel modifier! Thank you! (I gave you a small donation)

[@5MinutesBlender]

Glad we could help you 😊 Yes, we have received your donation, thank you so much 💝💝💝

[@wakurenai482]

thank you so much, That's very helpful for me. Now I understand is the scale problem for my model using bevel tool.

[@5MinutesBlender]

Glad it helped!

[@fatimadecorae]

you save my day 😍😘🥰

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@TomHaevy]

The only solution that really worked

[@5MinutesBlender]

Glad it helped 😊😊

[@HarvestrX]

Select all vertices, merge by distance (as long as you don't have verts really close, this won't cause issues). That is what worked for me.

[@5MinutesBlender]

Yes, this is how we remove "duplicate" vertices (actually they are not always duplicates, but just very close that breaks the bevel) 👍 But it is only one of the many possible causes that gives rise to bevel issues.

[@aryanbalajipathak232]

thank you so much, i had 50 extra vertices unnecessarily. this helped me so much

[@5MinutesBlender]

Glad it helped 😊 Cheers!

[@user-zs4iv3vf5m]

very very useful tips for bevel , thank you!

[@5MinutesBlender]

Glad it was helpful! 😊

[@sadralotfollahi]

Thanks for your help ❤

[@5MinutesBlender]

Glad it was useful for you 😊💝💝

[@jone9816]

Had to flip a bunch of Normals, and it worked XD Thank you so much

[@5MinutesBlender]

Glad it helped! Cheers bro!!

[@6dangelodacosta9]

THE BEST!!!!

[@5MinutesBlender]

Thank you so much 😊💝💝

[@raylandiego4321]

Thanks!!!!! Work for me the second method!

[@5MinutesBlender]

Glad it helped 😊💝💝

[@ramonsilverio6183]

Thank you very, very much. you saved my project

[@5MinutesBlender]

Glad it helped you 😊💝💝

[@vador6011]

Thank you so much ☺️… After two days of frustrating

[@5MinutesBlender]

Happy to help 😊💝💝

[@VictoriaTretiakova]

Big big thanks!

[@5MinutesBlender]

Thank you too! 😊💝💝

[@th3_t3rminator]

i faced the issue and works fine with the first method thank you so much really apricated it.

[@5MinutesBlender]

Glad it helped! Cheers!

[@falseshepherd6611]

You saved me from complete insanity - thank you!

[@5MinutesBlender]

Glad to know that it helped! 😊💝💝

[@hasi3online]

Thank you!. the second method worked for me.

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@wmh9783]

this was so helpful!!! thank you !!

[@5MinutesBlender]

Thank you too 😊😊 Glad it was helpful!

[@iqbal0840]

You are the man bro ,

[@5MinutesBlender]

Thank you bro! 💝💝

[@staruberhater1973]

Life saver!

[@janisceplis8744]

Bro thank you so much. i literally love you

[@5MinutesBlender]

Glad it helped you! 😊💝💝

[@neginjahanfakhr4292]

So helpful! thanks!

[@5MinutesBlender]

Glad it was helpful! 😊

[@simplegarden8711]

Thank you brother🤜🤛

[@5MinutesBlender]

Cheers bro!!

[@Kukatoo]

so helpful!

[@5MinutesBlender]

Glad it was helpful! 😊

[@luckysharma12]

Thank your🙏♥️ my problem the 1st one., thankyou again ✨

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@GraphicalAnuj]

Thank you so much bro for this video

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@vikramsharma2389]

Amazing, thanks

[@5MinutesBlender]

Thank you so much 😊💝💝

[@mohamadhayatleh4488]

Thanks for a great tutorial

[@5MinutesBlender]

Glad you liked it!

[@CalmDownPanda]

Very Great Tutorial !👏Thank you so much !

[@5MinutesBlender]

Glad you liked it! 💝💝

[@red4209]

Thank you so much 😁

[@5MinutesBlender]

You're welcome! 😊

[@ДенисЛазарев-ц6в]

U save my nerve. THANKS!

[@5MinutesBlender]

Glad to know that it helped! Cheers 👍

[@tomei3]

now everything is clear to me, thanks!

[@5MinutesBlender]

Great! Cheers bro!

[@ShebanFPV]

Many many huge thanks! It was sooooo frustrating!

[@5MinutesBlender]

Glad you found it useful!

[@ShebanFPV]

@@5MinutesBlender haha ))) I was ready to pull my hair out, it was so frustrating 😅🤦🏻‍♂️

[@JP-zu5gr]

Hello Derek. I have a problem in 12:10 with the bevel modifier, it is not working correctly. There is showing more connections with other faces and other stuff. Could you say waht is the problem?

[@5MinutesBlender]

There can be some specific issues with specific models, hard to guess. But if none of the stated methods solves your problem, you can select all in the edit mode and try to do a Limited Dissolve. If still not able to resolve, you can send your blend file as-is to us at [e-mail] and we will investigate it. Thanks!

[@roshanmartin3531]

wow, this was really helpful. Thank you :)

[@5MinutesBlender]

Glad it was helpful! 😊

[@mklolcraft6955]

thank you very much

[@digimikeh]

This is gold

[@5MinutesBlender]

Thanks a lot! 💝💝

[@Maddy._edits_]

thanks

[@kolar9114]

Well explained , keep going

[@5MinutesBlender]

Thank you bro 💝

[@chetlamanish9017]

thank you brother

[@5MinutesBlender]

You're most welcome! 💝💝

[@Zimbob2424]

I did all 3 of these before I even came here, still no luck. But I will bookmark the video since it has the most common problems. thanks

[@5MinutesBlender]

Thank you. There may be a different issue in your case, can you please share your blend file so that we can try to identify what could be the cause? Our contact details (Email IDs) are given in the About section of this channel. Thanks!

[@Zimbob2424]

@@5MinutesBlender thanks, I had cut holes in the object using a boolean modifier, so I think that had a lot to do with it. So I started over and used the bevel modifier on the cube before I started changing the mesh. so this way if anything causes problems with the bevel I would know immediately. Until I get more experience I'll probably make that a habit. Thanks for the help

[@AzureD2]

thanks to much for this video :)

[@5MinutesBlender]

Glad to know that it helped! 😊

[@SKYYY2222]

THANK U!!!

[@5MinutesBlender]

❤️❤️❤️

[@malithraheem3044]

this was very helpful

[@5MinutesBlender]

Glad you liked it!

[@Zns_07]

thanks a lot! i solved my problem !

[@5MinutesBlender]

Glad it helped! Cheers!

[@johndilauro4884]

...........finally, thank you........

[@5MinutesBlender]

Glad it helped! 😊

[@johndilauro4884]

I like the results, when it worked. but I would just give up. @@5MinutesBlender

[@febinjose4597]

very helpful

[@5MinutesBlender]

Thanks!

[@pamecv4628]

TE AMO, gracias :'D

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@staz8671]

Life saver

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@MohtashimHassan]

good

[@5MinutesBlender]

Thank you! 💝

[@vladapanchenko5768]

Hello and thank you for the video. I have had a problem with Bevel modifier. This modifier was connecting the vertices that were not connected normally and disconnecting some of the vertices that were making a face together. None of the sollutions you have told were working for this problem, the vertices were correct, normals were also for each face and scaling was not an issue. Then I tried to add bevel with using edit mode menu (also for all the object) and there was no such troubles. Do you know what could be a possible reason for this? Thank you.

[@5MinutesBlender]

I have experienced this too. There is one difference between the Edit tool and the modifier although the underlying functionality is almost the same. The modifier uses a "Limit Method" which determines which edges or which vertices to be included into the bevel (and this may not be always the same as what we intend to do) whereas the same tool in the Edit mode uses an explicit edge selection i.e. it includes only the edges we specifically selected for this operation. I guess this may be a reason why you saw a difference in the results from both of these methods, although I must say that some beveling issues can be too complex to explain, at least in my experience.

[@AltayebAmer]

appreciate

[@indexOFrefraction]

If you are using instances in geometry nodes you need to realize instances or the bevel modifier will not work

[@COOLACADEMYFORPHYSICSANDMATH]

Thanks bro, yesterday i was facing this problem, now i get to know. But one issue also i was facing that i do shade smooth but faces are not getting smooth, they have line of meshes vertical, why is it so.

[@5MinutesBlender]

Shade smooth may not give correct result if the geometry of your object is not clean. Incorrect normals, or duplicate vertices can be some of the issues. Please inspect around the area where shade smooth fails. You can go into the edit mode and check what is wrong.

[@COOLACADEMYFORPHYSICSANDMATH]

@@5MinutesBlender ok, thanks

[@juno-ik1ik]

tq so much for solution .... uwu

[@5MinutesBlender]

Thank you too 😊

[@blood.mirror]

What computer voice software did you use for this? And which specific voice within that package? Thanks!

[@isimsizkullanc8411]

goated video

[@5MinutesBlender]

Thank you so much bro! 😊❤️❤️

[@jennies6039]

Thanks for solving this problem. It is so helpful!

[@5MinutesBlender]

Glad it helped! Cheers!

[@phucho3837]

omg it worked. Thx alot XDDD

[@5MinutesBlender]

Glad it helped! 😊💝💝

[@ben9441]

Not all heroes wear capes. God speed.

[@JoALemusBLoG]

Fuuuuuuc**** thaaaaaanksssssss!!!!!!!!!!!

[@alicesophiabergamo5634]

Dio Grazie

[@5MinutesBlender]

😊💝💝

[@chriswestphal26]

Eh didnt work. Removed vertices but yet when i try to add bevel to an edge on the object it makes segments but only on one of the faces of the corners, instead of both, keeping it flat.... doesnt make sense

[@5MinutesBlender]

There may be some rare cases outside the common errors we have discussed in this tutorial. For each of such cases, the solution may be different. So if you can send your model to us ([e-mail]) we will be able to investigate the issues and suggest a fix. Thank you!

[@ryanpatton1795]

Just made my object bevel even worse after trying tip 1 and 2. I already had tried tip 3 from prior research. Not sure why a default cylinder would be so jacked up with nothing done to it.

[@5MinutesBlender]

We covered some common use cases, but an object can have other type of issues that may need some specific handling. We can help you further if we get to see your blend file. Our contact details are given in the About section of this channel. If you can send your blend file, we will look into it and suggest a fix. Thank you!