5th Gen 4Runner Fog Light Upgrade I Diode Dynamics SS3 Pro w/DRL Amber

In this video we upgrade to some very nice amber/yellow fog lights by Diode Dynamics. We installed the SS3 Pro with amber DRL. I'll take you through the install and review with before and afters. Please see links below for products, will fit 2014-2023 4Runners. Thanks for watching
SS3 PRO with Amber DRL (USED IN VIDEO): amzn.to/3xG26Pj
SS3 Sport with Amber DRL: amzn.to/3W1N9AY
SS3 Sport without DRL: amzn.to/3W3C2Yl
SS3 PRO without DRL: amzn.to/3Q8AI2v
Thanks so much for watching!
As an Amazon Associate, I earn commission from qualifying purchases at no extra charge to you. Thank you for your support!

[@donnyd8890]

the DRL function is an extra add on for each set of fog lights, about $40. sport’s cost $280 without DRL and $320 with DRL, pro’s cost $380 without DRL and $420 with DRL, and max cost $580 without DRL and $620 with DRL.

[@TroutWest]

Would love to have seen some night time shots of the road

[@krewjones]

Didn’t think I would go for the DRL option but that looked great. Thanks for the vid!

[@TEQLC]

Looks great! Always doing it right! 👍

[@T4Rgarage]

Thank you! Cheers!

[@a04a27]

cheers! ss3 max with amber drls 🥂

[@ivan199120]

Just subscribed, you definitely deserve more than 10k subs!

[@michaelstarmer3497]

I have these and they're awesome. I tapped a marker wire for the backlight, love it!

[@T4Rgarage]

Love mine as well, so bright with the perfect cut-off. Thanks for sharing the marker wire tap, I’m sure someone will find that info helpful on here

[@silverrunner8687]

Added the pros awhile back and love them. Not only on off/back roads but in the burbs and city they are great also, really light up the side walks and edges of streets. The color is awesome in the rain. 👍🏻

[@T4Rgarage]

I can’t wait to use them in the rain. You’re right, the light spread is really nice with good cutoff to prevent you from blinding people

[@sahakiap]

did this on a 23 limited last month. only difference in the install is you have to undo some hard to reach clips then pop out the rectangular fog housing assemble. i went with the ss3 sport i think its called plenty bright for me over the stockers that i put amber laminx on top.

[@aksalaman4689]

Nice upgrade.

[@T4Rgarage]

Very happy with them. Oem fit, oem switch, aftermarket power!

[@FloridaDeere]

I had the Sports in my Bronco and they seemed super bright, but the pros are more than double for "only" $100 more, I might have to reconsider the pros for the 4Runner.

[@DallasRSnider]

I was so wishing you showed tapping into the headlight running lights! How would you go about doing that?

[@ThomasM62]

Yes, please show how this is done.

[@itsdatbullshitter]

Looks tough. Do you have to adjust the fog light up and down?

[@Nick_Logan]

Question. What bulbs are you running for your stock DRLs?

[@dlry824]

Curious what daytime running light are you running?

[@mikewright2858]

I see references with these to both "driving" and "fog" configurationsor. I understand the difference, but are these different products or simply different aiming?

[@JSpalding]

So you tap the backlit part into the raptor lights 2 times essentially one for each side correct?

[@T4Rgarage]

That’s correct

[@b18c5turbogt35r]

can i just hook up the back lighting to the usb opition in the fuse box because i was looking up on youtube and most of the poeple that install the Raptor Light hook up the power there so would that work let me know asap because i plan to get a set of the ss3 for my toyota rav4

[@sunnyside832]

I see an option for amber backlit. Im guessing that is the DRL that you show?

[@T4Rgarage]

Yes it is 😁

[@GeorgeHarrington-yw3pr]

Any way you could do a video with a 2002 grand Cherokee thanks love and peace from Australia

[@illustriousbrainqueef1823]

Lol

[@NytronX]

Lmao what. He has a JDM Toyota, it's vastly superior to any Jeep.

[@GheeButtersnaps]

Did you tap both of the t taps for the running lights into the raptor lights harness? If so, did you just put them right next to each other?

[@T4Rgarage]

Yes I tapped both into the raptor lights. I think into separate raptor lights but you could into the same light also

[@GheeButtersnaps]

@@T4Rgarage So you can tap them into an individual light, rather than the part of the harness where they all conjoin?

[@jaybird99100]

I ordered the SS3’s non backlight, but the box came with the backlight harness. Could the company who sent them out maybe sent the wrong ones. Is there anyway to tell if they have the backlight function before hooking them up that you know of?

[@T4Rgarage]

You could always just not connect the backlight wire if they are the wrong ones, it will make no difference. What is the part number on the box? That’s a way to tell

[@jaybird99100]

@@T4Rgarage I unfortunately tossed the box awhile ago. I’d actually prefer the back light to be honest but decided to save the $40 extra and having to splice into some factory wires. I guess what I’m saying is, now that I’ve got them is their anyway to tell if they have back light function if I no longer have the box. I’d suspect there would be an amber light inside the housing wouldn’t there if it undid the 4 screws and removed the lens?

[@dizzle.1983]

Do you think these will work in the limited bumper

[@T4Rgarage]

They will work in the 2014-23 Limited bumper

[@LiquidXiron]

@@T4Rgarageand 2010-2013 limited and sr5 as well.

[@weeziteer]

How are you supposed to aim the fog lights? Closer to the headlight beam?

[@T4Rgarage]

Below the headlights I believe. Suppose to function as low level lighting to illuminate the ground but not the fog in your field of vision

[@MrTylero28]

I want to say fog lights should be aimed around 12”-18” from the ground. Because fog is low to the ground. The yellow will help cut through the dense fog. It’ll be a wide beam that sits lower than your main beams

[@DallasRSnider]

How do we allow the fogs to stay on with the brights?

[@T4Rgarage]

Sorry I am not sure off hand

[@teachthestory]

Britebox anytime is a product you can buy to achieve this. Have one on my 4Runner. Works well.

[@MrTylero28]

I wired mine to the oem switch but made it run on a separate relay so the power stays on with high beams

[@jroddy1]

INSANE! Value?? I would NEVER pay $400-500 for fog lights.

[@mind_haze2414]

Black Friday price bro save over 100