People don't understand unless your doing some serious off-roading or overlanding you don't need Fox, Kings or Icons. Bilsteins are more than enough for every day and weekend warriors. But I get it majority go for looks and show most of the time.
@monkeypolice3048 Жыл бұрын
I agree. 😊
@erucader3 жыл бұрын
Very professional! You guys make it look easy. I would love that set up on my 2015.. the wheels look so good!
@Zice-tl9yk4 жыл бұрын
Need to really turn the music down so we can hear you but other than that, good informative video!
@88ROTORS4 жыл бұрын
Didn’t realize it was that loud, our apologies and thank you for viewing!
@jermlittle19704 жыл бұрын
Zice 2525 it’s not loud.Just another narcissist cry baby.Ignore these people you’ll never make them happy
@stevennguyen77534 жыл бұрын
I don’t see any problem with the music volume at all
@NRGRX4 жыл бұрын
I a really liked the music 🤷🏼♂️ Can’t please everyone 😘
@ethanmurray22033 жыл бұрын
Wow, tough crowd! The music is repetitive and gives me a headache. I could also swear I can hear "hey Toyota" in the music....subliminal programming maybe? How about a little Free Bird, or Stairway to Heaven? Would be better, but you might get shut down I guess.
@strawberrymochiiz4 жыл бұрын
I watched probably sixty 88 rotor videos before doing this same setup with UCA'S on my 2015 Limited 4runner. Excellent setup for the money.
@hernanromero253 жыл бұрын
How much did they charge back then?
@strawberrymochiiz3 жыл бұрын
@@hernanromero25 I bought the parts and installed them on my own. 88 rotors is like 4000 miles from me haha.
@pacificrim16673 жыл бұрын
Did you do a body mount chop? If not, do you have any rubbing issues?
@strawberrymochiiz3 жыл бұрын
@@pacificrim1667 if you're talking to me, No I didn't do a body mount chop. I'm still running 265/70/17 tires so rubbing is minimal to none.
@anthonyviscusi40422 жыл бұрын
@@strawberrymochiiz which ome spring did you use in front and back?
@88ROTORS5 жыл бұрын
Please subscribe for more daily videos! FOR TROLL THAT’S GHOSTED, I CAN’T SEEM TO UNGHOST YOU BUT YOUR’RE OUT OF YOUR MIND IF YOU THINK YOU CAN DO THIS SETUP WITH WHEELS AND TIRES AND UCA FOR $1500 YOURSELF.
@714DONNYBROOK4 жыл бұрын
88ROTORS what would the bilstein/OME setup cost to install on ‘19 4Runner?
@NowThatsCool34274 жыл бұрын
What OME springs would you recommend for 3/2 lift with 150lbs additional front weight?
@rommelatanoso11374 жыл бұрын
Sir what size the tire
@nofyfb1234 жыл бұрын
For most people - with exception of hard-core off-roaders (and the owner of this truck is obviously not going to do any serious off-roading simply because it's an SR5, not Off-Road edition) - this is overkill. I installed a 2.5" spacers for under $100. Technically, it is recommended to replace upper control arms to be able to set caster to specs but I have not experienced ANY adverse effects of having too much caster - no handling abnormalities or abnormal tire wear on any of my 2004 (230,000 mi) and 2018 (16,000 mi) 4Runners.
@Serjical233 жыл бұрын
Spacers won't help with the atrocious nose dive when braking or pirate ship-like handling. There are on road benefits to better shocks and springs. And SR5 runners are still extremely capable off-road
@static6033 жыл бұрын
LOL. He's not doing any offroading with 2WD truck. SR5s are plenty capable.
@nofyfb1233 жыл бұрын
@@static603 SR5 is reasonably capable. But not like Offroad with rear locker and A-TRAC. And I most definitely wouldn't do uniball UCA. They wear out in an instant. I just installed JBA'a.
@LurkMe2 ай бұрын
That's a professional shop right there
@JohnWaid6Plus5 жыл бұрын
Great video guys thanks 👌🏽 keep up the great work you do..
@88ROTORS5 жыл бұрын
Thanks John! Appreciate the feedback.
@logantamayo67823 жыл бұрын
Nice set up! Love how it turned out.
@andrewdejulio3 жыл бұрын
I’m getting the exact set up put on my 4Runner here in Arizona soon. I wasn’t sure if this was the way to go but now seeing this I’m confident in my decision. Thank you for making this video.
@YU33i2 жыл бұрын
How do you like them??
@shawnskiramone1862 Жыл бұрын
So, did you get the kit? How is it?
@andrewdejulio Жыл бұрын
@@YU33i It tightens the ride up. To me it made the ride much better.
@andrewdejulio Жыл бұрын
@@shawnskiramone1862 Yes I got it. It made the ride much better and I put bigger tires on. The 285/70/17. Held the road much better. Stock suspension it felt like it didn’t hold the road good. It made me like the 4runner even more with the different suspension.
@shawnskiramone1862 Жыл бұрын
@@andrewdejulio That’s awesome to hear. I’m still deciding on my lift kit. Looking to get at least 3.5” full suspension but not sure yet what brand(s), and I’m new at lifts. If you don’t mind me asking, how much did it cost you just to complete your lift without the tire upgrade?
@dgriffo13693 жыл бұрын
These guys have their hands on so many 4Runners I wanna make a trip to get some work done. Here in New Mexico. Wonder if anyone can recommend a place?
@Proflexme9 ай бұрын
Great video and very informative. Exactly what I was looking for. Thank you.
@classic-kool Жыл бұрын
You guys are AMAZING‼️ I live in Saint Louis Missouri and we are starving for a shop like yours out here!!
@88ROTORS Жыл бұрын
🙏🏻🙏🏻
@ThePatrickm205 жыл бұрын
Looks good. I own a 2011 and did a similar set up. I used a -6 wheel instead and gives it a mean stance. Some trimming was needed. Awesome video 👍🏽
@jross134503 жыл бұрын
I have a MGM 4R and about to lift it this weekend. Nice to see what is potentially going to look like after the lift
@efraingonzalez68422 жыл бұрын
What size did you do your tires at?
@jross134502 жыл бұрын
Mine are still the stock 265 70 17 @@efraingonzalez6842 they were new when i bought my truck so i just left them. Will go to 285 at some point
@vimo27324 жыл бұрын
Perfect setup
@71502854 жыл бұрын
my 4runner's level/lift 3" front and 2" Rough Country spacer kit was only $219.00 total + free shipping. Labor cost for installation was only $400 for 4 hours of $100 per hour labor.
@71502854 жыл бұрын
@@5ohJ we are talking about "least expensive" suspension lift/leveling kit in this video. Read the fucking title of this vid. "Cheapest (Least Expensive)".
@Serjical233 жыл бұрын
@@7150285 It says nothing about a leveling kit...suspension lift will always be more expensive than just a spacer lift
@71502853 жыл бұрын
@@Serjical23 technically spacers ARE suspension lift as well. I know it's not new springs/strut/shock absorber combo but it's still a suspension lift. Body lift is different though.
@se75153 жыл бұрын
Are there ever issues with the speedometer not being accurate after adding larger tires?
@miguelangelapazagrande80582 жыл бұрын
Hola amigos hacen un trabajo maravilloso no me lo pierdo sigan adelante desde peru'
@ozzie30564 жыл бұрын
which ome spring did you use in front and back?
@josephfoutch58892 жыл бұрын
Following for an answer too
@worldthroughus1604 жыл бұрын
Do you need a body mount chop for this set up? What was being grinded towards the end ?
@WendzDarKnight082 жыл бұрын
Just purchased a 5th Gen 4Runner today. Can’t wait to lift it
@ryanm40132 жыл бұрын
Congrats and beware! The 4Runner is an expensive mistress…she likes the accessories
@joecerda6305 жыл бұрын
Do you recommend toytec?
@jadoriffic4 жыл бұрын
No sway bar relocation kit needed?
@caseytodd76324 жыл бұрын
I really like these wheels. I have a silver 5th gen and am having a hard time deciding on wheels. Wish they offered these with a negative offset.
@karkule59193 жыл бұрын
These Icons are nice, but personally I would never buy any wheel with their name engraved on the wheel, the center cap is ok because I can change that, but not the wheel.
@pacificrim16673 жыл бұрын
I believe they do have with negative offset now.
@caseytodd76323 жыл бұрын
@@pacificrim1667 man.. if they do.. I'm gonna be pissed. I actually put these wheels on mine about 2 months ago and am adding 1.25" wheel spacers to get them to around a -32 offset.
@d.b.cooper3 жыл бұрын
Do you guys recommend doing a diff drop to align the front half shafts?
@grahammakcrow73542 жыл бұрын
Which specific OME coils are you using front and rear?? I could not find in the comments 🤷🏻♂️
@JoseLopez-it1op5 жыл бұрын
Icon Rebound Wheels. NOT Fuel Anza
@leapoffaith65883 жыл бұрын
Would anyone mind going over everything I need to get this kit?
@kenjepsen45792 жыл бұрын
This is what I'm wanting to do to my 19' I'll also be adding skid plates and bumpers. How do you account for the extra weight? What is your turn around time? Do you also do re-gearing?
@MrFredFries3 жыл бұрын
How much for this build on my 5th Gen 2018 TRD OR?
@thomasraylopezdeleon71074 жыл бұрын
Have you guys ever experienced having the ABS and Traction control warning lights turn on after installing a lift? If so is it common and how is it fixed? Thanks. BTW, awesome videos. Been watching your installs for some time now, too bad I live in Vegas, otherwise I would’ve gone to you guys for my 4runner.
@88ROTORS4 жыл бұрын
We have a ton of customers from Vegas and farther. Never any issues if done at the recommended and proper height. If issues arise, try a zero point calibration. Good luck!
@AirDownForWhat5 жыл бұрын
Music is drowning you out. Y’all did great on the truck though.
@miguelangelapazagrande80582 жыл бұрын
Hola amigos. Me gusta la manera como lo hacen el trabajo Hasta pronto desde peru'
@charlesabbott96053 жыл бұрын
I noticed on the gray sr5 with the emu springs and Bilstein 5100's all the way around you stated that the front had 3" emu springs with the shocks set at the "0" setting. Which setting is that the first notch? I was gong to install some 3" Dobinson springs (C59-314) on the front with 2" Bilstein springs on the rear with 5100 shocks on the front and the back (similar to your install). I just didn't know which setting to use with that large of a spring on the 5100's on the front. So, if I understand you correctly, you left the 5100 clip on the lowest setting with the 3" emu springs? Is that correct? Also could you explain why you choose that particular set up for the front, advantages and disadvantages (ride quality, handling performance etc)? Many many thanks in advance. Charles
@JAM76ER4 жыл бұрын
What were they grinding on at the end?
@amaker4 жыл бұрын
It looks like they are doing a frame mod....but it is on a Tundra, not a 4runner.
@JR-xi7mz5 жыл бұрын
Love those 4runners
@pblhernandez675 жыл бұрын
Alright very well said
@beartrl3 жыл бұрын
It is highly suggested that you answer questions that people post. Especially if you want their business
@1800jaydeep3 жыл бұрын
Did you need to add extended break lines with a 3inch lift?
@Viendopiedra50293 жыл бұрын
Hey guys. What tire do you recommend for good baja style offroading and low highway noise?
@YU33i2 жыл бұрын
Is this setup good for a good amount of off-roading and daily driving?
@zanderscarbrough69993 жыл бұрын
Suring the very last part of the installation you showed somebody cutting something inside the wheel well. What was that and why? I've heard that depending on the size of the tires that you use you need to do some cutting but what did ya'll cut there?
@CptnEarlySquirt3 жыл бұрын
That was a tacoma.. the tacoma seen on the video earlier. Tacomas have emblems on the doors.
@IdahoChevyDude4 жыл бұрын
Do you have any experience with eibach? They make a kit for the gx470 and it's around $800. Including rear spring conversion
@alcolavista-224 жыл бұрын
It will be more inviting to come if u explained D breakdown of all high end to low end lifts kit..
@ardyarco52215 жыл бұрын
That's a 2wd truck should have put a spindle lift on it 3inch lift on the coilovers without uca will leave alignment will be off shouldn't go more then 2 without new uca's . Spindle lift keeps all the factory specs while lifting 4 inches and has the best ride quality
@anam8085 жыл бұрын
Ardy Arco good to know. Thanks for the info.
@559FreshNo2 жыл бұрын
That came out dope Can you do a 06 4Runner?
@zenofthemoment3 жыл бұрын
You say this lifts 3"F/2"R, does this need a diff drop to keep the CVs happy long term?
@ovrlndr3 жыл бұрын
Definitely! For 3” I’d do a diff drop.
@ezlikesundae684 жыл бұрын
I want to get this lift for my Tacoma! Any chance you guys would install an aftermarket front bumper? I have a Body Armor 4x4 TC-19339 Hiline Stubby that needs to go on. Maybe I can get the lift and bumper at the same time?
@hectormorrobel93264 жыл бұрын
Awesome video.... but the music is a bit loud and annoying at the beginning.
@josea50683 жыл бұрын
What OME springs are those ? Do you have the spring number!
@rayraykass99358 ай бұрын
Was there any rubbing with those size tires ? Thanks
@thatonedude9263 жыл бұрын
Didn't have to drop the front diff a bit? Don't want the stress of the CVs
@dp16432 жыл бұрын
Will the stock 2010 Trail wheels have the same results? Does it matter if I have or do not have the KDSS system? I’d like a little more aggressive stance. Can I use spacers for my wheels. I actually really like them a lot. Thanks!
@adama47914 жыл бұрын
Pretty funny this came through on my feed and I live down the street from y’all
@555R5 жыл бұрын
do you guys offer a fully assembled setup like this for the 2018 4runner...with kdss and whatever spacer is needed to fix the lean? front and rear already setup for i guess a 2.5-3" lift?
@88ROTORS5 жыл бұрын
We sure do. That is exactly what we do.
@TJ808Replays4 жыл бұрын
How much was this setup exactly at the time??
@eddie81662 жыл бұрын
I have a stupid question, if you are using the original coil spring in the front, how are you getting the height to change? is the new shock that much longer? is this what you would call a lift kit? I am asking because I have no idea how to do this, and I would like to do the same to mine,
@yegh1a5 жыл бұрын
How much ball park price are we talking here? (Considering buying a 4runner and getting a lift but no idea how much lifts/kits cost)
@brettbenson45165 жыл бұрын
Great questiin!!!! How much?
@chrisginoc5 жыл бұрын
They never respond to comments with a price. Try calling or emailing. Let's just say lifts arent cheap which is why some cheap people out there add spacers instead.
@MiguelGarcia-fo5gl4 жыл бұрын
Buy the 4Runner first breh.
@chrisginoc4 жыл бұрын
@@MiguelGarcia-fo5gl I agree. Get the 4runner first if it's that you really want it. Then figure out lift.
@cjxplusone4 жыл бұрын
They vary... It's not one simple answer. Some people want different set-ups. But a rough estimate... I'd say $2k-$5k. Pretty penny for sure.
@silverbackshooting15633 жыл бұрын
When you say “medium OME lift springs” what exactly are they? Because if I google medium OME lift springs it doesn’t come up and I’m trying to tell my local shop exactly what I want. They got me to buy some rough country stuff and after reading reviews they seem like garbage.
@peten64454 жыл бұрын
What are the front and rear spring rate?
@TheKurtismclean4 жыл бұрын
Well someone watches goonzsquad channel using their go to music ✌🏻
@imrichierichb76223 жыл бұрын
Is that a 2wd or 4wd? I’m wondering if I can do that same set up on a 2wd? Or are they completely different?
@jsparks188763 жыл бұрын
I'm pretty sure this set up would work on a 2wd but my opinion I would save the money and just do a spacer lift. Most aftermarket coilovers have stiffer springs witch isent bad on 4wd due to them being heavier but on 2wd you may not like the ride quality.
@--RSL-- Жыл бұрын
What about just installing the ome 3” lift kit? Why use ome & bilstein?
@RCGJR_3 жыл бұрын
With the newer 4runners with the safety camera sensors, do i need to take it to toyota dealers to recalibrate?
@stovar11823 жыл бұрын
Damn, that's sweet!
@tonyb2824 жыл бұрын
Great work, do customers usually buy a 5th, tire Rim as a spare. If so will the bigger tire rim fit underneath of the 4runner. Thanks
@adamw44694 жыл бұрын
If you went with a 285/70/17 as in this video, it will fit. You can verify by googling "t4r 285 spare fit" and read some relevant forum posts. Hope that helps.
@tommyung36544 жыл бұрын
I did get 5th tire and wheel, but, 88 ROTORS would not fit it underneath. So, I ended up getting a spare tire carrier.
@vw63663 жыл бұрын
Did it need an alignment after the install
@Volksoner6193 жыл бұрын
Yes. As a general rule you should get an alignment after any suspension work. Of course there are exceptions but it’s always a good idea
@jacksongil91233 жыл бұрын
Hi Hello If I just want the looks? I don’t need to buy the TRO PRO ? & just buy SR5 just like that and just install long travel kit? King suspension?
@stitchg60604 жыл бұрын
Could i do this set up on a 2011 4runner limited? I want to get rid if the XREAS suspension
@MidnightsCowboy4 жыл бұрын
Lissy Guevara Yes you can
@lcatalla72925 жыл бұрын
Would this set up able to handle if to consider adding greater or equal to 200lbs of body armor?
@GreyZonex3 жыл бұрын
Duuuude.. that music .. i coulnt stay..
@dthomlyn2 жыл бұрын
Do you have any links for the shocks and springs used?
@komlossnaeh12533 жыл бұрын
i have 2004 toyota 4runner how much it cost me to do complete job like video ? please let me know
@chadw.60498 ай бұрын
What OME springs did you use?
@LAST.SON.74 жыл бұрын
The video shows and states BFG K02, but description says falken wildpeak. May want to edit that
@cjxplusone4 жыл бұрын
I just noticed that too
@cjxplusone4 жыл бұрын
Same with the wheels.
@matthewm.39905 жыл бұрын
What ring level and OME 884 or 885 for front? 895, 895E or 889 for the rear? Mahalo
@vivarias3 жыл бұрын
Yo! Did you figure this out? Thanks!
@xiongvou4 жыл бұрын
What were you guys grinding?
@gary_babich4 жыл бұрын
BMC i'm guessing
@elderjustus4 жыл бұрын
There a part of the body that can rub on the bigger tires. So they cut it off.
@PocketManga4 жыл бұрын
wow those machines just messed up the wheel paint 5:09
@darthtyranus76832 жыл бұрын
88 Rotors that bgm is loud af lmao
@belka854 жыл бұрын
Sick set-up. Don't need an alignment after?
@elderjustus4 жыл бұрын
My understanding is you want to drive it for a little while to let the springs settle. Then yes you would want to get an alignment.
@reecec84908 ай бұрын
Yes you do
@chrisulloa1628 Жыл бұрын
what number ome coils are the ones you guys put in the first mgm 4runner
@MIKEG69364 жыл бұрын
Is the SPC Upper Control arm part# 25480?
@brunolevi56495 жыл бұрын
Do these lift and/or leveling kits void the factory warranty?
@venturedreams1405 жыл бұрын
Yes in ca
@tuyenhoang55465 жыл бұрын
Yes anywhere
@brunolevi56495 жыл бұрын
Tuyen Hoang thanks
@brunolevi56495 жыл бұрын
venture dreams thanks
@mehGyver4 жыл бұрын
Dealerships add these lifts to brand new trucks. I doubt they'd sell many trucks if the warranty was voided.
@dp16432 жыл бұрын
Will this set up fit 285s without doing any cutting?
@jlittleb Жыл бұрын
What if I have KDSS ? Do you install spacers. Thanks
@uturn1902 жыл бұрын
So how much was all of that total cost?
@kennethmurphy71504 жыл бұрын
Does this work with KDSS on an Off Road edition?
@rodneyswanson98394 жыл бұрын
Does it?
@tommyung36544 жыл бұрын
Yes, it does. I got Bilstein 5100s with OME 885 springs in front and 895 springs in the back on my 2019 4runner TRD offroad with KDSS. I also got the SPC UCA to help with alignment..
@danbautista78944 жыл бұрын
Tom Myung how much did yoir setup cost you? If you dont mind me asking. Thanks in advance!
@tommyung36544 жыл бұрын
My Bilsteins, OME springs, and SPC uca's cost around 2K including installations. After that you will want to spend additional for bigger tires and may be wheels. The list is endless...
@ricardodesouza72294 жыл бұрын
Is there a way to the name of this set up messaged to me and let know if I can use it on my 13 4Runner sr5? Thanks
@fayco14 жыл бұрын
Bruh they charge $3500+ and say “cheap price”
@acefaaace4 жыл бұрын
Fayco G. What would you say is a fair price then?
@bobsokoloski95594 жыл бұрын
400 springs 400 shocks do it youself
@rodneyswanson98394 жыл бұрын
Got 5 estimates in CO, for comparable kits with installation. All were around $3400... Although I did get a S & B cold air intake and BFG K02’s included too.
@hekss20004 жыл бұрын
😱😱😱 was that with wheels and tires?????
@fayco14 жыл бұрын
hector salas yea and they said taxes not included 💀( and prices change)
@michalgti99089 ай бұрын
Et0 17 8.5j? 265 70 17? Thanks
@ck43914 жыл бұрын
What do you guys think about Dobinson springs?
@dp16432 жыл бұрын
What did you have to cut?
@justfine777772 жыл бұрын
Don’t be cheap, get those control arms.
@tonecrazy884 жыл бұрын
Are these 1.5 inch rear springs?
@cherifarster8282 жыл бұрын
Did you put the new springs on the back as well or just the front??
@88ROTORS2 жыл бұрын
Front and rear. 👍
@thompsonayo3516 Жыл бұрын
I have the same car still don’t know any add on plz help
@aaronmp3185 жыл бұрын
Which model of Old Man Emu springs are you using for the fronts and rears? Thanks
@88ROTORS5 жыл бұрын
885 and 895E’s on this one.
@garrykennedy5484 Жыл бұрын
Is there no front diff drop kit with this? Kind of important if you off road a lot.
@garrykennedy548411 ай бұрын
I take that back... If you even go with long travel shocks/struts. Unless you can achieve more than 21.5degrees on the driveline, you don't need one. And by lowering the diff by one inch, you lose 1 inch of clearance and most under belly protection won't fit.
@zavala91583 жыл бұрын
No body mount chop?
@douglasbuck23594 жыл бұрын
He did not want UCA's with all that labor paid for? The stock UCA's are nothing but stamped metal! Also, was it just me or where were the front axle shafts for 4wd?
@Ownphxaz4 жыл бұрын
What size tire are you running on these icon wheels? Also 17" or 18" wheels?