60 HP Johnson Evinrude VRO Lower Unit Removal and Water Pump Service

60 HP Johnson Evinrude VRO Lower Unit Removal and Water Pump Service

[@jimdisomma3294]

Thank you for making this video! I have 70 HP VRO Johnson, and I had never worked on a boat motor before...this was fantastic!!!

[@mikemugge8345]

Great video. Had the memory on that phone not run out it would be the best video on youtube for doing this project. Excellent detail with good footage. I have watched a bunch of these and this one is the clearest I have seen.

[@ninjagodzilla6402]

This is the best video on youtube on how to change the water pump.hope ur alive & doing well my friend.thank you

[@NOLL72]

I used to work on outboards for a living, but that was well over 20 yrs. ago. Now my neighbor inherited a boat from his late son and needs my help to get it running again. Thank you for refreshing my memory.

[@NOLL72]

My memory kept refreshing afterwards. As I recall, most outboards sold as a single unit turned clock-wise as viewed from the top. Only one of a pair sold together would likely turn counter clock-wise. Much like twin inboards or I/O units would. It keeps the thrust and maneuverability in balance. JMO.

[@rogerbones]

Mate , that was one of the best instructional videos I’ve seen on this topic , you answered all my questions without me even asking any Great job my friend👍 From your mate in Australia.

[@otpyrcralphpierre1742]

Thank you for your comment, my Friend. I've always wanted to go to Australia, but now that I've retired, I doubt that I will ever be able to afford it.

[@jefffleck5196]

My son and I were going to do this together,regretfully he passed away before we could do it. I would like to thank you for such a wonderfully detailed video. May the Lord bless you in all your ways.

[@ryanchristy4123]

Awesome video

[@ronaldfambrini1445]

@@ryanchristy4123 My

[@MrDiamondsatwork]

Great Video. Straight to the point with out a bunch of unnecessary mumbo-jumbo. Just the right amount of detail to get the job done right. Thanks

[@edmooty6507]

Great video. I pressed the like button when you wished you had never heard the name Obama! Very informative and because you explained it so well I think I can do the job! Thank you from Watts Bar Lake in Ten Mile TN

[@joelittle7424]

Brother, if I was still young enough to have kids I'd name one of 'em after you. You saved me no end of aggravation!

[@otpyrcralphpierre1742]

That is by far one of the greatest compliments that I have ever had. Thank you for that.

[@alangrant5278]

Wow thanks for an very good video. Makes it very clear how to disconnect the shift shaft

[@jackfarrell4727]

Thank you for the video I have rebuilt my lower unit and it has passed the pressure test

[@mariesmith2221]

My husband really likes your video! It helped him so much that the manual didn't say! Keep them coming please!

[@tbull5555]

Getting ready to tackle an inherited motor to get me a little fishing boat going. Thanks for posting such a good video. They are straight forward and very informative!

[@conrad-davischronological]

I have watched many KZbin videos over the past several years and have to say that this fellow has real talent. A real gift for using just the right amount of words and description as he goes thru the process. I especially enjoyed the magical appearance of the cup of coffee. That moment actually made we hunger for a cup myself. I was disappointed in the comment about former President O'Bama and realized that this American probably voted for Trump. Isn't it amazing how we as people can enjoy things together like working on our engines and boats and yet have varied opinions when it comes to our politics. Surely that is what makes the world go round. Thanks for a well done and well thought out video!!

[@raysiekert]

Thank you for making this video. While I am mechanically inclined I have never done this before. Your video was very detailed and has definitely helped me feel much more confident about changing the pump. Thanks again! Ray

[@stevemason9231]

Excellent video. Have changed several Johnson water pumps on various engines. Your explanation on the shift linkage is the best I have ever seen. Good Job!

[@rasoul786]

Love your videos. That Southern Gentleman drawl, and unique use of the language, as well as the clearly hard earned knowledge is warmly reassuring.

[@SuperVacationfun]

Hi Ralph, great instructional video. Your video will save me a lot of time and make the job so much easier. Only thing I might to different is replace the coffee with a beer. Thanks again.

[@martincontreras8140]

after paying 220 last season for a water pump replacement " first time boater " this video actually showed me what my mech was blocking every time i tried to snoop so i would not see how he did it ,very helpful video thank you so much, i plan to try it next replacement

[@robertwest6205]

Best video I have ever seen on this excellent job only thing I would add is run a tap in all threads before installing

[@robinberkan8966]

Thanks for posting this. We just bought our first boat and my ex-mechanic husband wants to know all he can about the motor. You provided him with a lot of good advice, etc. and the joke about the coffee and Obama was good, too!!

[@oscarstitt6147]

I thank you for taking the time to show us the right way to remove and install the water pump. You made it clear step by step.

[@zlalkakaa]

Thanks for this video! Replaced the water pump myself and motor runs fine. To make life easier, as a suggestion, when you are putting the impeller cap on the impeller, you can have a second person tie the impeller and then face the classes the right way and then slide the cap on. Works great!

[@johnparkerlumpkin]

Thank you for your time and effort making this video, and for sharing your knowledge. Helped me out tremendously on my old Johnson 70!

[@swenner64]

Thanks My motor sat for about 4 years and the mechanic said I should replace the water pump, I think I may try it myself. Very informative.

[@8boogers272]

Just wanted to say thank you for doing this video !!! You have no clue how much it’s appreciated ! Just done my 1990 60hp Johnson . Only difference was we have 2 bolts under the round plate on the bottom. Other then that you were spot on ! Thank you so much !

[@JAX-BLIXT]

Thank u sir! I followed this video step by step and i just nailed my first ever impeller job👌 today is 17/6/2021 so ur video still helps people👍

[@garyfurlong9487]

Great video I'm a professional water pump tech now after your video. Please do more

[@ltfoh6695]

Great video. Easy to understand and had great tips. I feel more confident that I know what is going to happen. I like it that you did not rush this video and took the time to cover the subject in detail.

[@javiieg43]

Great step by step video!! My boat has an 88 Evinrude 70 hp and ive been thinking of taking it to a boat shop. I will now order the water pump kit and replace it myself and save me some $$$ Thanks for the video

[@captjjs1]

Thank you so much for this Ralph! The way you walk through it is perfect. I have a 70 hp 1993 Johnson and I'm sure there are some differences, but I know it will be a great reference for me!!!! THANK YOU GREAT JOB!

[@TemporalReconnaissance177th]

captjjs1 94 70 HP here, any clue where the thermostat is?

[@brentbaldwin4738]

man that pin on the top is just about impossible to even see,i sure wish you were here in Utah,you could have all the coffee you wanted.anyway sir you really helped me a great deal,more so than any other video on water pumps.thanks Brent

[@cassandratakemyhandwilson4630]

@Ralph Pierre: Thank you so much for the instructional video. I am a retired Vet and I am a fairly new boater and fisherman. Taught myself at 53yrs old to fish by studying everything from utube to other fisherman. Your video and step by step instructions, i feel very confident that i can replace the impeller on my motor. Thank you so much. I will let you know how i did. Respectfully, Cassandra🙋

[@kulucriss1]

Really good video, I have a 70hp and want to change the water pump as it no longer works after storage. I have undone all the gearbox and am so glad I watched this before messing about with the linkages, will put two bolts back in then follow your instructions to the letter. Top job!

[@saliofiddler7743]

Really enjoyed your video. Excellent tutorial for us broke mech heads.

[@druggles1]

Ralph, thank you, for the great video! Nice detail telling me everything needed to rebuild my water pump!

[@davestevenson7410]

Great video . I love to access you/tube when I haven't worked on my old junk for a long time.Some videos are crappy made but not yours. You covered the whole job from start to finish magnificently and the camera work was very good. Now I will get to work on my old 73 outboard.Thank you for taking the time to do this.

[@smokeymadison6493]

Best video re: impeller replacement on You Tube . Great Detail very clear and precise.....Thanks

[@Mr.G.18]

thanks for the video coverage as its my first ever attempt to change an impeller, now all completed and running fine, thank you very much sir.

[@johnkozlowski7817]

Thank you very much for the video I'm an auto mechanic and I know many of the things to do to take things apart and put them back together, I appreciate the extra tips and thoughts to get through the Hairpin turns in a task, I thought it was very complete and very professional thanks again it's always best to go to the Wizard to get the wise....

[@KtownGrenadier]

I also want to thank you for this video. I think i have to change my pump and this was very helpful.

[@TheShady80]

Fantastic Video, well done !! was searching and reading up on how to drop my lower unit (1977 140 hp Johnson) to change the water pump and couldn't find anything with pictures let alone video ! So thank you So So much for taking the time to go through it all step by step and upload. Really appreciate your efforts.

[@nunya53]

Outstanding video....seems easy enough. I'm ready to tackle this on my mid-90s Johnson 60 HP now.... Thank you,

[@attackpest]

Great video. he was not a good President for shore, but he was the president. Thank you for your video It helped me heaps Thank you Gary Australia.

[@druggles1]

Great video, Ralph! Thank you so much for taking the time to create and share it. It has been very helpful and I use it as a reference and review each time I replace my impeller, now for the second time.

[@corysue136]

Thanks for taking the time to post this video. You did a great job! You helped a lot of people.

[@jimmarshall47]

I feel like I a kid again working with my Dad outside. Great Video, thanks.

[@josephnott9634]

Thank you for the video, sir. I am a first time boat owner and even I was able to follow along on this

[@deantandeski6776]

Thank you, you for sharing your knowledge! Very well done, you made it look easier than I thought. I will soon see if I can follow precise directions.

[@billdigiacomo6632]

Good video Ralph! I had to watch several before I got a good view and explanation on disconnecting the shift rod. Thanks!

[@Jordan22220]

Yes! That was my problem too

[@ChristopherCoppolaVilla]

Thank you so much, Ralph! I appreciate the details like the key and directional chamfer on the inside of the impeller. Got the lower unit off and going to use your detailed advice to hopefully get me through the water pump service once the kit arrives. I left the shift rod on the upper power unit (my 97 Johnson 30 has a linkage disconnect behind the water intake screen) and I pulled the water pump copper tubing out with the lower unit, so hopefully I haven't funked it up and will be able to guide the top of that tubing back in! Best wishes. "I wish I had a fresh cup of coffee...there it is!"

[@spywiz1]

This is a very detailed and concise video. Made a future daunting task seem very easy and less daunting. Thank you!!

[@seanmetcalfe2137]

One of the better videos I have found. Thanks very much. It helped so much. Great video.

[@richjohnson6725]

Thank you Ralph. You made it look easy. Shift shaft made my wife laugh.

[@garyhahn1423]

Great video. Very helpful, especially all of the little "tricks of the trade" pointers you gave. Thanks!

[@kingfish3066]

Your a great teacher the professor..

[@dannypeeler8483]

Thanks a bunch for posting this. It was just what I was looking for and your instructions are easy to follow. Please continue to provide informative instructions I have subscribed to your page.

[@tetedure1769]

Very big THANKS! I realy like your style. Your mech talking is realy pleasant. So..I do the same you explain on your instruction. And. It's run great again! Take my "Bonjour" from Quebec, Canada Mister Ralph!

[@northcastfishing]

Québec sucks nuts, from Ontario.

[@pafo74]

Thank you!! Helps my out with my problems! Br from Sweden

[@brandondavis6263]

Thank you for this video. I actually have the same engine on an old Tracker bass boat. I have worked on many outboard motors but have only done a few water pumps on smaller outboards. Mine is definitely in need of a new pump. You video was very informative and gave me the confidence to know I can do it myself.

[@HILUX8888]

Excellent video, I was concerned about replacing my water pump, you've been really helpful. Thank you.

[@jaynordgaard1074]

Very very helpful you gave all the little tips I was looking for. thank you from Minnesota.

[@vernebetts5034]

Going to do mine next weekend! Thanks for the video!

[@bengt-olovahgren7732]

Tack så mycket. Mycket bra video

[@sylvesternz]

Very helpful and insightful video. Thanks so much for doing it.

[@Marcoforce]

Thanks for this video, this very good how to gives me the confidence to do this myself without screwing something up. Thanks and looking forward to more maintenance or how to vids...

[@scottjarrells3229]

I plan on doing this in the next few days and this definitely helped me out in the way of confidence. I have done it before years ago but this was definitely the refresher i needed.

[@artbrooks5376]

Great video Ralph. ordering my water pump kit today!

[@mojo615]

I'm going to change my water pump tomorrow. I feel pretty confident now.

[@ninjagodzilla6402]

How did it go?

[@maxgrimes6965]

Absolutely fantastic video! Step by step and simple. Thank you so much Sir!

[@fibro33]

Nice job on the video. The local dealer was out of the service manual for my year so this video was helpful.

[@livelaughlove716]

For everyone trying to get the lower unit back on and cant get the shifting rod hole to line up w the pin i figured it out, adust the throttle either in forward or reverse till it lines up. Took me hours to figure that out

[@RCAVEMANS]

Nice tip

[@Logan.isabell]

I was pulling out my hair trying to figure out how to get the shaft out. Video has been very helpful thanks

[@charlesg6794]

Very good video very clear and concise. Thank you very much give me confidence to do the job myself.

[@bluefj-wc3vz]

Good video, thanks. Gonna go tackle my 40 now outside. Nice red Yota in background.

[@motomallen]

Just bought myself a RIB with a Johnson 70hp motor, this video is fantastic, thank you for demonstrating how to do the impellor properly. And I hope you're smiling now, old purple lips has been replaced by a real man :)

[@ronandjudy1]

Thanks Ralph, very well done. Any dummy like me can understand what you are doing. I thought I was the only one who likes my coffee while I work.. :)

[@RIMHQ-YT]

i liked how you said "shaft" during the video. thank you. im gonna work on my shaft now myself.

[@michaelb9632]

Right on. Happens to be my exact motor except mines evinrude branded. Helped me out a lot on abbot I got that's been sitting for 4 years.

[@mattvangalen7254]

Great video mate I'm going out to do mine now! Thanks Matt

[@earlmattle9484]

Thanks going to try and put my 150 Johnson water pump let you know, I first watched your video

[@jtucallme]

Thanks I forgot about that bolt under the skeg...I've been bating on my lower unit all day

[@kingfish1946]

Best video on this repair, I watched several. Shift rod is a little difficult to get in.

[@TXDanielM]

This was super helpful. Exactly what I needed to know.

[@doodbuddy]

Good 'ol southern boy made watching this procedure relaxing. Love the re-insertion of the lower and water tube -- gotta git'er inserted just right -- kinda like dating. ;-)

[@daveshisler4851]

God bless you sir! I watched every you tube video, bought an O&M and with full confidence took on the project, but got to the shift shaft part and couldn"t figure out for the life of me how that hidden pin came out! Neither the blow up in the O&M or the instructions described how that was assembled!! They talk about it being a pin or bolt NOT depending on the year, but most likely a bolt, so I even got to the point where I started to think I was looking at the snapped off head of a bolt and thinking what a nightmare this had turned into. If you hadn't of shown that opposite side pin and lever and how that bell crank is two halves, I would still be scratching my head. Thanks for the "instant coffee" and the Nobama coment!

[@aldinmulasmajic2173]

Thanks best video out there for this motor helps me alot i havent done mine yet it will be easy now

[@jenssupik1952]

Thanks so much! You helped me a lot.... Cheers from Cologne, Germany

[@adambright3369]

Great video, very helpful and detailed.

[@jordanmassey2725]

Good video - i would suggest foregoing the gasket maker and substitute the grease on the o-rings with dish soap.

[@ninjagodzilla6402]

I done this procedure yesterday.that little keeper key is a fun one.mine fell off while removing the impeller.this was my first time doung this so was new to the game.i soon figured out that the keeper is very important.i did complete the job.but 🤔 whooo.it was finnikey.shes peeing great now.

[@basshooker689_3]

Thanks for the great instructional video Ralph. Im off to tear into it.

[@bernardsullivan2930]

good article i have a 1988hp johnson 70 hp it has clocked up 6470 hrs still going well just replaced the impellor etc

[@johns2453]

thanks for the info, i have a 1990 70hp Johnson. had it along time and it looks great .i'm gonna start puttin my own pumps in for now on instead of gettin my buddy joe who's got his own boat service..i have a honda 40 a suzuki25 also to do so thanks with the johnson part

[@johni4213]

Just re did my water pump thanks to you

[@michaelbenjamin743]

Nice video I'm going home in a little bit to pull my lower unit off 1985 50 hp Johnson

[@ianmathews5567]

Great video very helpful and you save me hundreds. cheers

[@1StillHunter]

Thanks for the video! Very well done. I didn't find the lower O ring on my 70hp 1988 Johnson and was wondering if mine got chewed up and spit out. The new replacement kit I received did not give me one so I am now perplexed whether I need to buy and install one or not. Besides that oddity I ran into, your video was very good! Thanks from Wisconsin!!

[@rutheking1]

Thanks for the great information.Im ready to tackle my pump now.

[@artdistin1972]

good video with commentary !!!!