60 Second Rust Tips | XOR Switch + Alarm If Power Source Destroyed

[@nnmiroslav]

great job man, subbed :)

[@solen1849]

also works for solar panals, if you use an OR switch, you can make your system use solar or wind depending what is generating more energy, and then use a blocker to block battery back up, so you have wind/solar, then battery back up that isn't being drained. Rust electrical is the real end boss

[@Vohilem]

спасибо, очень полезное объяснение

[@mellotron_scratch]

Why is your video not 60 seconds? :D

[@ProgNoizesB]

those switches are in my eyes bugged, because when the XOR switch only have 1 input active (which is 1 power) and the other has 0 but that has only power when I turn the RF receiver on) then still it uses 27 power and not just the power send to it which is 1 in this case. So it's bugged. Not usefull in my case. Not sure if i explained it correct but normally if you put 1 power on the left side of a XOR switch and 27 on the right, then it will do nothing but still there will be 27 power used which is dumb. It should only use 1 power for the XOR switch. Pretty lame The AND switch does do the same thing. I send 1 power to it on the left through a RF receiver, and 27 power on the right. When the RF receiver don't send power to it, it still uses 27 power from the right while that can't be the case cause it is blocked sort of speak. The output of the AND switch is 0 and still it uses 27 power. fukked up in my eyes.

[@tiger5d9]

yea its nice, but if they destroy ALL power sorces it wont work anymore :D

[@ziemniakipastewnenieczerni3998]

this might produce false alarm durring no wind conditions