🔌 RUST | Complete Smart Switch | Beginner Guide Tutorial | AND | OR | XOR | TIMER 🔌

[@morg0o159]

I usually stay away from those switches because I don't know how to use them. Awsome video well explained thanks my guy....

[@AniCodYT]

Glad I could help, really appreciate the comment!

[@yuborthedominator687]

Actually now theorectically you could make computers in rust like in minecraft. I dont kbow if servers could handle it though

[@xMAD_SCIENTISTx]

This was actually extremely helpful thank you

[@karajito]

this is gold

[@MrGrimXIV]

I've been using the OR switch thinking it would perform the XOR's job. Thanks a lot

[@AniCodYT]

You are welcome!

[@jamesmcgraw9704]

Thanks!

[@AniCodYT]

What a little legend you are! thank you!

[@Death-Tokes]

What if I want the timer to take 10 seconds to activate something, not 10 seconds of activation? What kind of circuitry would I use, and how would I go about it..?

[@mastersteamer3697]

thx dude3 nicec vid

[@AniCodYT]

Thank you and thanks for the comment

[@teamthunder6797]

Great Video man, thanks!

[@AniCodYT]

No problem! Thanks for the comment

[@toastedorange9106]

Say i needed about 6 switches to turn off at the same time and turn on at the same time

[@paul7339]

Wish u explained the off switch thing more, i tried tying in a rf receiver to the off switch on my sam site and anytime i shut it off with a transmitter the only way to turn it back on is by disconnecting the wire, turning it off and back on, then reconnecting the wire, and hooking up a 2nd reciever with a different frequency to the on switch didn't work at all. I don't get it

[@BBond88]

Excellent vid mate

[@AniCodYT]

Glad you enjoyed it.. appreciate the comment

[@aaron-fq4fs]

Verry good very nice make you're own server

[@AniCodYT]

thats something im looking into :-) dont know when but could be a good investment

[@mrred5004]

With the timer how would u make it keep turning on and off after the set timer

[@trentonmorecraft5325]

I haven’t tested it but I would imagine you need to put it in a splitter which output 3 goes to a different timer with a 1 second time… Timer2 -> Timer -> Splitter -> Timer2

[@grtchrs]

I noticed when the laser deactivated the light through the switch off toggle, it would not turn back on even when u flipped the switch back to ON. I too have had this issue .. is this a bug??

[@Yuripunk2077]

I think it is a bug. There's no good reason to completely deactivate the switch just because the ON toggle input stopped receiving power.

[@dogcriminal5859]

Great video :)

[@AniCodYT]

Glad you enjoyed it and really appreciate the comment :-)

[@dogcriminal5859]

@@AniCodYT btw how did you first start youtube

[@AniCodYT]

@@dogcriminal5859 glad you asked.. by making models, then making videos on my views and then for some reason turned onto gaming tips where I stayed... really unusual journey so far :-)

[@dogcriminal5859]

@@AniCodYT Ok ty I'm starting soon so just trying to see

[@Andrewvrr]

hey how do you get the server ???

[@boooshwookie4376]

👍🏻

[@KoolBreeze420]

I guess the only way to really have the lights turn on and off automatically is using the timer? You would think that having a turn off and turn on with the smart switch would allow you to trigger the lights to turn on and stay on until the trigger-off is triggered. It just makes no sense. I want the lights to turn on when I drive the car into the garage and turn off when I enter the base but the logic of these switches well there is no logic they are dumber than bricks. Is there a solution to this?

[@FlamingEmberSeal]

How do you make a power source turn on and off repeatedly for a certain amount of time?.

[@adriz_streams]

timer loops

[@eduardmart1237]

What server do you use to test all these switches?

[@adriz_streams]

just search "sandbox"

[@umbrellasgt9910]

Video helped, what's music used in the video?

[@blackr0se]

Im a legend

[@AniCodYT]

yes you are :-)