60" TV for less than a $1 - Vizio E601i-A3

  Рет қаралды 1,399,674

FrugalRepair

FrugalRepair

Күн бұрын

Пікірлер: 3 100
@FrugalRepair
@FrugalRepair 2 жыл бұрын
I installed a 15,600W power plant on my roof by myself. Check out the Video --> kzbin.info/www/bejne/iqDbd4KYn9OffJI
@paulhooson6850
@paulhooson6850 4 жыл бұрын
I repaired TVs for 22 years, starting with sets that still had tubes, later transister and finally IC chips. The new technology works great and has excellent features, but is too small for this old guy. It's a young man's technology these days. Bravo to you working with such tiny components.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! Working with a microscope makes it very doable. In order to record this video I couldn’t use my microscope and instead had to watch through the tiny screen camera which is partly why I had trouble holding the transistor steady. I just upgraded to a trinocular one so hopefully videos like these will be easier to record.
@new-knowledge8040
@new-knowledge8040 4 жыл бұрын
The good old days. Technicians back then used to do things like design and build their own Pay TV Decoders. My version, cost about $5. It did not require a power supply of its own, since It pulled only 15 mA, and thus you could just install it inside a TV converter and then tap the power from the TV converters 12 VDC line instead. The decoder PCB was 4.50" x 1.20". To install, you just had to cut the baseband video wire, the wire that leads from the demodulator to the modulator, and hook these wires up to the decoder PCB's input and output. Anyhow, it decoded the baseband video signal line by line, rather than use the complex frame by frame PLL method. Later on I tried to sell the design to a cable company. But they said that my design was too good. Meaning that it was far to easy for it to be copied, due to it having so few components, components that were also readily available to just about anyone.
@andreilucian10
@andreilucian10 2 жыл бұрын
Yeah i remember i was kid and a family friend come to us to fix our black and white tv....watching for hours searching the fault and the smell of the dust and hot tin i will have in my memory for ever.
@martinbittinger5593
@martinbittinger5593 2 жыл бұрын
Well I was wondering if you could help me with a problem I have a 55 in LG TV that I bought off someone and it had a picture perfect picture on the internet part you know show settings and all that but when I brought it home to hook it to my internet it kept saying put in passcode I put in Pasco says it again so I tried to hook a DVD player up to it and the screen turn white and fuzzy it has sound but you know it's white and fuzzy picture but when I unplugged the DVD player it just has sound and I don't know what it could be it doesn't have pictures you know of people or anything on it like it should have but it's perfect when you go to settings it's like nothing's wrong with it on settings
@MrReeceyburger123
@MrReeceyburger123 2 жыл бұрын
Nice one man I’ve done a lot of lcd,plasma, led repairs my self deffo in the 1000’s of devices 😁
@alangabrielnietosaavedra3639
@alangabrielnietosaavedra3639 4 жыл бұрын
Last week i bought and repaired a 42" Smart TV for $5. Is the first time in my entire life i'm having a decent tv
@FrugalRepair
@FrugalRepair 4 жыл бұрын
That is so amazing to hear! Thank you for sharing. Keep it up!
4 жыл бұрын
A technician telling you you how to fix your telly and showing you you why some technicians charge so much money for a small job most television companies discourage technicians and make sure that most parts are not always already available they don't want me to fix their tellys they want you to buy a new one it's nice that this man takes the time to help others shows you you once again there are good technicians out there honest and out there to inform the public about how they're being ripped off when they buy a telly and how it breaks down and so easily could be fixed but many technicians would rather charge a higher price for a small job this man showing you you can fix your telly and if you have a decent technician who is honest and decent like this one he won't rip you off a charger for a price
@thegingerpowerranger
@thegingerpowerranger 6 жыл бұрын
I recently fixed my 60" tv by replacing it with an 92" one
@Devil_inside-
@Devil_inside- 5 жыл бұрын
😄😄
@baflabies
@baflabies 5 жыл бұрын
@Eìon O'hInneirghe Get more triggerd plz
@lawrencewashington9901
@lawrencewashington9901 5 жыл бұрын
Eìon O'hInneirghe if u really think about it... nobodies idea is ever original
@fookurmum69420
@fookurmum69420 5 жыл бұрын
Hey man, you doing ok?
@timojackson9930
@timojackson9930 5 жыл бұрын
😂😂😂
@Ba_A
@Ba_A 5 жыл бұрын
This reminds of an old joke about a repairman who was called in to fix a household appliance. He said "It's a bad screw, it'll be $100 to replace" The owner was in shock, $100 for a screw??? Repairman explained "well, it's $1 for the screw and $99 for knowing which screw to replace!!!"
@artgoat
@artgoat 5 жыл бұрын
It's $0.54 for the component, $15 for shipping, $150 for hot air rework station, $75 for solder station...
@michaelbling4909
@michaelbling4909 5 жыл бұрын
lol
@justingreaves6769
@justingreaves6769 5 жыл бұрын
@@artgoat 50 bucks for new tcon board
@sabbath275
@sabbath275 5 жыл бұрын
@@artgoat that's the investment once you know you how to fix things you get things for the low and can resale them and make your money back ain't nothing too complicated 🤷🏻‍♂️
@BxCortez2050
@BxCortez2050 5 жыл бұрын
Exactly !!!!!!!!!!!!
@timmy7201
@timmy7201 4 жыл бұрын
If you don't have the tools you can also use a cheap soldering iron of around $25. To remove the broken component, heat each solder joint separately and use a sharp knife to bend up the pin while the solder is heated, so it's not touching the solder anymore. To solder on the new component, put the new component in-between some tweezers and lower the side with the single pin just a little, so this side touches the solder joint first. Heat the solder while lowering the component in place. When the side with the single pin is soldered, the pins on the other side should slightly touch their solder-pads underneath, then complete soldering by alternating between both left over solder joints. If you notice you are bending the pin on the other side a little to much, just reheat this side quickly to release the stress on this pin.
@D4no00
@D4no00 4 жыл бұрын
or you can use a lot of solder, just make a big glob that will get cold slow and take the part out with tweezers. Clean the pads with a wick, place component, solder 1 leg while holding the part and then solder the other 2. Much easier and cleaner.
@marioexpropiacionpetronilo2753
@marioexpropiacionpetronilo2753 4 жыл бұрын
Great clip! I was a TV repairman (old analog TV). Your video is really good, especially for techs, but I doubt an average person could do such repair (mostly due to the lack of tools and patience).
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks!
@johnvaldez8830
@johnvaldez8830 5 жыл бұрын
Super valuable video for a common fix on the TCON board for these Vizio models. I can't thank you enough; Vizio is all my family uses. Thanks for the tool descriptions in the notes above as well, also valuable info. These are the fixes that never make it to any manual, and it's so cool you took the time to explain it.
@wingspan9842
@wingspan9842 5 жыл бұрын
I did the same thing with my 3k, 10 yr flat screen by replacing four capacitors for $1 plus $4 in S&H 2 yrs ago. It was the first time my adult son got the chance to watch what his mother use to do for a living when he was a toddler. It impressed the hell out of him, lol !
@Fanta....
@Fanta.... 5 жыл бұрын
thats pretty cool.
@webaruhazberles
@webaruhazberles 6 жыл бұрын
The most important part you forget to mention, how did you find the wrong component? need to be tested all the components?
@FrugalRepair
@FrugalRepair 6 жыл бұрын
If you search online there are forum posts and even other videos that explain this transistor is a place to start your diagnosis. I didn't spend very long on the diagnosis since others had helped point it out. The internet is a great place to help solve problems.
@Sal112350
@Sal112350 6 жыл бұрын
Agree, this is just bs component troubleshooting, no instrument. Continuity is useless on on board/soldered component.
@Independent-Voter-2024
@Independent-Voter-2024 6 жыл бұрын
@@Sal112350 you are incorrect, sir... continuity is a great way to test... but, he failed to actually prove that the part was the issue. He should have tested the continuity on the board again AFTER the apart was taken out to show that the part was causing the short and not some other component on the board. THAT is the proper way to do a continuity check.
@Independent-Voter-2024
@Independent-Voter-2024 6 жыл бұрын
@Derp The answer to your question, Derp, is bad design. The transistor in the circuit is running "hot" (over 70% capacity) regularly and if the transistor quality is weak it will go again over time. But this knowledge has little barring on the propose of Frugal's presentation. He tested the part, it needed replacement, and he showed how to do it. If a person watching tests the part and it isn't shorted... they should find a different video to fix their problem :-) .
@trustnoone3795
@trustnoone3795 6 жыл бұрын
@Derp You sir, are correct. After doing this kind of work for around 40 years, knowing to check components on the secondary side (for the lack of a better term) of this transistor is a must. If another part is shorted, leaking, etc., it's pulling too much current through the transistor so it failed. Sometimes you get lucky. Lot's of times you don't. If that transistor popped, what does ''the internet'' say then?
@ARADG15
@ARADG15 5 жыл бұрын
“Need very steady hands for this” *proceeds to demonstrate severe Parkinson’s*
@kjallen2610
@kjallen2610 5 жыл бұрын
Lmao
@MrHeat1up
@MrHeat1up 5 жыл бұрын
😂😂😂🤣🤣
@pabloramirez4672
@pabloramirez4672 5 жыл бұрын
😭😭
@TechWingsWildThings
@TechWingsWildThings 5 жыл бұрын
Hahaha got the giggles 😂🤣
@ReneStover
@ReneStover 5 жыл бұрын
He needed to use his right hand to hold the transistor, and his left to hold the heat gun, he would be more stable using the hand he is more used to using for small parts.
@KpxUrz5745
@KpxUrz5745 Жыл бұрын
The amazing thing is how little is actually wrong with these tv's. This is a wonderful channel to clarify exactly how you fixed these models. I can't wait to take another look into my bad tv because it could well be some very inexpensive part(s). Very helpful! I enjoy fixing stuff too.
@brentpolk2431
@brentpolk2431 6 жыл бұрын
You're the man! I have a 60" TV in my basement right now waiting for me to replace some capacitors!
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Keep us posted how it goes!
@PeopleAlreadyDidThis
@PeopleAlreadyDidThis 6 жыл бұрын
Hmm...you too can fix a flat screen TV for $0.54...if it happens to need this particular transistor, never mind how we diagnosed the failure, and you have a hot air rework station. I once saved a stereo receiver with a $1 capacitor, too, but that was the only lucky shot I’ve had. The other jobs took a lot of troubleshooting and had more involved failures.
@raymondo162
@raymondo162 5 жыл бұрын
he coulda fixed it with just a soldering iron. but I understand what you mean. my mate fixed a four-year-old 60inch telly using NO parts. (just squeezed up a screen connector). but I think it's worth having a look if you have a few tools and basic skills - if you can't fix it, there's nothing lost. if you can it's a result
@VegasGuy89183
@VegasGuy89183 5 жыл бұрын
Nice job on the video. Very clear photography. I really thought this would be a video about a bad capacitor. I have a ~15 year old LG 27" 1920x1200 monitor that I fixed many years ago. I learned what was wrong by searching the Internet forums. My search taught me about "capacitor plague." Ballooned cheap knockoff capacitors that caused many electronics to prematurely fail. I replaced the bad capacitor and my LG is still going strong today. I agree with you. The Internet is a wonderful resource for DIY'ers.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thank you! Great to hear you fixed your monitor. Yes, so many tvs and monitors were hit by that "plague".
@mikeburch2998
@mikeburch2998 5 жыл бұрын
Congratulations on the repair. It's a very rewarding feeling. Greetings from Arizona.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks! Yes, this repair was a lot of fun.
@wissamelwi9597
@wissamelwi9597 5 жыл бұрын
Good job, thank you for teaching others this kind of skills.
@CynthiaSanMiguel-y9y
@CynthiaSanMiguel-y9y Жыл бұрын
OMG you a tech genius, u saved a tv that had the exact problem but different model my tv was model 43R6E3 and it worked! Thank you for the pointer as soon as I saw the video I knew we had the same problem.
@FrugalRepair
@FrugalRepair Жыл бұрын
Congrats on the repair!
@omarhadjarab8049
@omarhadjarab8049 4 жыл бұрын
Hi Fugal, thanks for the video. I suggest you adjust the air flow on your hot air gun as surrounding SMT components may be blown away, and you can notice that in the video when the diode above the transistor started sizzling, and if they don;t get blown away their soldering will dry out hence making it a dry joint. The trick is to use a good heat with less low air flow, that way the heat contact is precise on the bad component.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
I agree. This is not my best work. I was excited plus I couldn’t really see what I was doing since my camera was so close and covering the board. I have a microscope camera now so that won’t happen again (hopefully).
@dennisr2
@dennisr2 4 жыл бұрын
Great how-to video. You explained it well enough so that I feel confident enough that I could do the repair on my own TV if need be. The link to Ali-express for the soldering iron and hot air combo was a nice touch because although it is cheap equipment, it would probably last long enough to make a few repairs and save me the cost of replacing the entire TV.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! I’ve been buying a lot more from AliExpress this past year and I’ve been happy so far.
@Alien_Tech_ICP
@Alien_Tech_ICP 4 жыл бұрын
I got my Tv from This guy and it still works perfect. Thanks man.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
That’s great to hear!
@HandyHudsonite
@HandyHudsonite 5 жыл бұрын
I fixed our Samsung a couple of years ago - replaced a couple of transistors on it. Great tutorial! Looks like you’re channel is doing great! Thanks for subscribing to mine. 👍
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Awesome to see you've got a YT channel with some great content! Way to go fixing your tv too. Did you perhaps mean replacing capacitors?
@HandyHudsonite
@HandyHudsonite 5 жыл бұрын
FrugalRepair Right, capacitors. Thanks for that correction! Good to hear from you.
@campkira
@campkira 5 жыл бұрын
I don't bother fixing it just wait for exchange replacement program and get rip of it...
@FrugalRepair
@FrugalRepair 5 жыл бұрын
A popular question I have been asked is: "Are you making more videos?" Yes! I took a break from making repair videos to design and install a 15.6 kw solar system on my house, (more on that to come) but for now, here is the latest video: kzbin.info/www/bejne/nJbWe3qFgdqleMk
@jesuspinpin6807
@jesuspinpin6807 3 жыл бұрын
I like your mood sir when u are repairing, your follower from the Philippines
@FrugalRepair
@FrugalRepair 3 жыл бұрын
Thanks!
@joblessalex
@joblessalex 5 жыл бұрын
Are you sick Mr Rossman? You sound funny today and you're fixing TV's instead of MacBooks
@Beamerbrad
@Beamerbrad 5 жыл бұрын
joblessalex Louis doesn’t solder that bad
@ComdrStew
@ComdrStew 6 жыл бұрын
Newer TVs are easy to fix now even if you do not want to change a transistor you can buy the boards cheaper than buying a new TV and just replace the board. I have fixed a few TVs over the years. The old tube TVs were easy you just pulled the tube out, took it to Radio Shack and got a new tube and replaced it lol.
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Exactly. Swapping out boards is pretty easy and you only really need a screwdriver.
@kenjsr1
@kenjsr1 6 жыл бұрын
No doubt the TV repair chains lobbied for tv's with no tubes so you'd have to pay a technician an outrageous fee to replace a 5 dollar circuit board. I remember fixing my own TV many years ago by testing for those burned out tubes. Cars were owner repairable also.
@johnbarber6862
@johnbarber6862 5 жыл бұрын
@@kenjsr1 Valve TV's?? you still in the 60's? LoL. Music was good, TV's were rubbish.
@aceviperx
@aceviperx 4 жыл бұрын
Thank you for this great info! I replaced the culprit mosfet with a random mosfet I desoldered from a random board. The tv turned on for a few minutes before blacking out again. This confirmed your suggestion that the mosfet is burnt. I can now go look for the correct spec mosfet to repair my tv. Tv is a SONY KDL-70R550. It’s an old dog but if it costs 50cents and a bit of sweat to repair I’m happy to continue using it.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
That model uses the same tcon? Keep me posted.
@aceviperx
@aceviperx 4 жыл бұрын
FrugalRepair it’s using the 5348 board but the layout is identical. I’ll keep you updated with further developments
@aceviperx
@aceviperx 4 жыл бұрын
I couldn’t find the mosfet of the exact spec that you specified so I tried my luck with a SI5328DS mosfet rated for 100v. It works and the tv is back working
@roberthorton6816
@roberthorton6816 4 жыл бұрын
Fix the car
@TampaTec
@TampaTec 6 жыл бұрын
Congrats fixing your big screen TV it's nice, a big thumbs up 👍and shared.
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Wow, I'm honored! You made my day. Love your channel. Thank you!
@joshcook2312
@joshcook2312 6 жыл бұрын
Screen is tore half an inch not cracked can we fix it
@FrugalRepair
@FrugalRepair 6 жыл бұрын
You mean that there is a scratch in the screen? You probably can't fix it but you can minimize the damage a little bit. The part you touch on the lcd panel is the front polarizing film. That is glued on to the lcd with clear adhesive. Its been a while but depending on what kind of scratch and how deep, I've used a pencil eraser or a black permanent marker to mask some of the imperfections.
@campkira
@campkira 5 жыл бұрын
But now he end up with Vizio...... Not sure that a good thing...
@clivethomas9523
@clivethomas9523 3 жыл бұрын
please send me the T-con number for JVC MODEL LT- 55N875 smart tv
@joedfazio
@joedfazio 5 жыл бұрын
It’s the skill of finding that failed part that makes the repair bill, plus your soldering station, access to schematics, multimeter, etc.
@zapanjormas4787
@zapanjormas4787 4 жыл бұрын
schematics.... many of electronicians don't use schematics for fixing boards, we uses them 20-30 years ago, now theire not avaiable for the most of them. So, we tests, we try, and maybe we fix...
@leso204
@leso204 4 жыл бұрын
And more modern boards with macro smd's no chance repair for diy .....
@zapanjormas4787
@zapanjormas4787 4 жыл бұрын
@@leso204 1206 SMD models (and biggers) are not so hard to tests and replaces, but for the tiniests ones (402, 201 and smaller), i'm ok with you, what a pain to try to test and even more to replace :/
@okbustaman
@okbustaman 5 жыл бұрын
First time I see this man.... I paused the video at 0:19 Because that's enough for me to subscriber Coming back later to watch more...... I love people like this on KZbin.
@davidsolis8568
@davidsolis8568 5 жыл бұрын
sohaib bari Turn on then turn off
@gordonlam2757
@gordonlam2757 4 жыл бұрын
this is your bread and butter, how reg joe gonna know that transistor is the culprit?
@stefanaddwork
@stefanaddwork 4 жыл бұрын
How didnt you see the moment where he is measuring that very component.... It isnt that far fetched that understanding its inner workings it is much easier to go and look for failed components. Because they are most commen to fail just hard to find if you dunno what is controling what. Just grab yourself some broken tv a multimeter and go have some great fun. But remember to stay away from the high voltage area...,if you dont you find out really fast why. Good luck! Stay safe!
@OpSic66
@OpSic66 4 жыл бұрын
Most issues like this can be quickly checked with under $150 in tools, and a quick google search of " common problems". I have done this numerous times for all sorts of various electronics and it has saved me not only thousands of dollars in repairs, but hundreds of hours of manual troubleshooting.
@DRUMTECH81
@DRUMTECH81 6 жыл бұрын
Such a coincidence, a friend of mine was about to do that same, same exact model. Took it apart and pulled out the board. Did a multimeter test and the results were the same. Now I just need to put in an order for a new one. I really hope this works because my Xbox is lonely. Ill let y’all know what happens when I get my transistor. 07 salute!
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Glad to hear you are fixing it!
@DRUMTECH81
@DRUMTECH81 6 жыл бұрын
replaced the transistor and it works! thank you for making this video, 07 salute!
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Wow, that is great to hear! Way to go replacing it.
@421CentralIowa
@421CentralIowa 4 жыл бұрын
I'm not super into TV watching, but the info you're giving out here is too good not to subscribe to and consume in my free time. I see so many people throwing out TVs and I'm sure most of them require only simple repairs. Thanks for making all these videos.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! Did you happen to see the latest video? It was the cheapest repair yet to get a tv working again.
@421CentralIowa
@421CentralIowa 4 жыл бұрын
@@FrugalRepair I just watched it. It's amazing all of the tricks you have picked up repairing these TVs. I actually have a 50" Samsung Plasma TV that has one green vertical stripe. It started doing that at 1 year of age and I just quit using it. Since I never throw anything away, I still have it. I'll have to peruse your channel to see if I can look for pointers on repairing it. Of course, it was replaced with a 4K LED TV that blows it away, but it'd still be fun to repair it. I originally came to your channel to show a friend how to look for lightning damage to his TV. Thanks for putting out such useful content and taking the time to help so many. You're banking a lot of positive karma.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks, that’s encouraging for me to hear! Lines on a plasma maybe a relatively easy fix. It is possible (but I don’t really know in your case) that the ribbon cable needs to be cleaned and/or re-seated. You need to have the tv unplugged then locate the ribbon that controls that section where the line is. I bet there are videos about it. Those ribbon cables are usually at the bottom after you take off the back cover. Usually they are connected to the Z-board. You can google that.
@jonsnell4751
@jonsnell4751 5 жыл бұрын
If you prepare the lands as you did, plenty of flux and use a soldering iron to make each land. DON'T use hot air to place the new component in!
@dennisp.2147
@dennisp.2147 5 жыл бұрын
Right. This was almost like a "how not to" video for SMT soldering. I was cringing the whole time.
@JC.72
@JC.72 4 жыл бұрын
Any problem with hot Air? I mean some do solder set with hot air right any reason to avoid it?
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
Jon C. - unnecessary for this particular component with three leads. If it was a chip with lots of leads, then a soldering iron won’t be the tool to use.
@captainrobots1
@captainrobots1 5 жыл бұрын
Most solder has flux in it and also I would never use hot air station its risky and for repairing one thing its pointless. Just use a soldering Iron it's cheap and it works well and its safe if you use it right.
@freeeflyer
@freeeflyer 5 жыл бұрын
My thoughts exactly.. For a 3 pin component it's useless. Just pump the solder from the board, put the transistor on place, and solder it with a simple iron..
@bror8228
@bror8228 5 жыл бұрын
@@freeeflyer Did you mean: suck the solder from the board...? I have a solder sucker...never heard about solder pumps... :)
@binarybox.binarybox
@binarybox.binarybox 4 жыл бұрын
@@bror8228 If you need to desolder lots of connections, you can buy a solder station fitted with a vacuum pump and nozzle.
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
Who needs a solder suction pump for a job like this? Just use solder wick. Should have cleaned off all that excess solder so the new part leads are in contact with PCB with minimum solder in between. That huge pile of solder this guy used is more likely to crack than if it were minimal.
@drachengott95
@drachengott95 4 жыл бұрын
Also soldering one leg to tack it in place with an iron is easy and then you only have to touch the other pads after you have cleaned and added new solder to the pads.
@richmadrid9563
@richmadrid9563 Жыл бұрын
I myself loves to tinker alot with electronic stuffs. I hope to learn the troubleshooting skills you have, not just the visual check. So, with this, you got a new subscriber! 😁😁
@InTheSh8
@InTheSh8 5 жыл бұрын
Yes, I fixed several LCDs just by replacing a visibly leaking capacitor!
@smitcher
@smitcher 5 жыл бұрын
It's repair 101... (1) look the board over with a magnifier, are there any burn marks (change the burnt stuff) are there any dry joins (reflow them) are there any board cracks or scratched traces (bridge the gaps with wire), are any caps leaking shit (change them) (2) Check voltages Mains, DC voltages at chips etc (3) test shorts/continuity on fuses (should be), transistors (shouldn't be), caps (shouldn't be) etc etc... most of it is common sense...
@josephbragg5445
@josephbragg5445 4 жыл бұрын
What were the symptoms your tv was showing was it not powering up by any chance.
@kirkwatstien6979
@kirkwatstien6979 4 жыл бұрын
There I no such as a visually leaking cap...wives tale extension there is no leak you can actually see in a leaking cap It just means the cap is leaking voltage not leaking a substance so...you have never fixed anything by finding a leaking component since there is nothing to leak out of it. b.s. called you shant recover back peddling not allowed it's just a bad lie but why did u lie there's a deeper reason me think
@kirkwatstien6979
@kirkwatstien6979 4 жыл бұрын
Lie no such thing as a visually LEAKING CAP there isn't anything TO LEAK OUT only voltage drops that what leaking means ya moron not like a substance leak so I gues you have x Ray vision I f you can see leaking voltage lol ....I hate b.s. liars
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
kirk watstien - you ain’t seen nothin’ yet if you haven’t seen a visibly leaky aluminum electrolytic capacitor. They have a discharge vent on the PCB end, and the leaked electrolyte is often visible on the board. And they will also pop their lid, which is quite visible. No BS to this, you just haven’t had enough experience with all sorts of varied devices to have seen those.
@kurthubbard-beale5003
@kurthubbard-beale5003 4 жыл бұрын
Very cool. How about when the tube has blown due to an apparent lightening strike ?
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! I have a video about what to check after a lightning strike. Check it out and let me know if you have any more questions.
@Tech_481
@Tech_481 3 жыл бұрын
I just picked up a vizio 47" tv for free the seller described it as the backlight went out on the right side, so I brought it home (this is my 5th tv I've fixed from my crona quarantine away from school for the past months thanks to you! Btw lol)well I decided to plug it in to see if they where correct and all the sudden I hear it squeal and smoke comes out of it!!😂 well I take it apart and look at the backlight inverter on both sides sure enough the right side was burnt from the capasitors smoke and the left side capasitors where bulging so I ordered 5 new ones I only need 4 but why not have extra lol for $6.99 and now it's running perfectly strong and has been for a week. Sorry for the long read but I figured I'd put my story if it might inspire someone to get after there broken tv and fix them.
@FrugalRepair
@FrugalRepair 3 жыл бұрын
That’s so great to hear!
@edpax14
@edpax14 4 жыл бұрын
Well done! This is a great help for DIYers like me.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks!
@techgamer1597
@techgamer1597 5 жыл бұрын
Question is how did you know out of all those components that one transistor was bad? Did you test all the components on the display board or something?
@mrreisskeks3441
@mrreisskeks3441 5 жыл бұрын
He literally explained that this was just a suspicion before testing. Many repairmen work like this. You don't have the time to check everything so you just move down a list of parts that have a high likelihood of failing. If this TV is known for a particular part failing then why even bother with the other parts?
@airgliderz
@airgliderz 5 жыл бұрын
He watched another KZbin video on this common issue..
@shanesmaineshop
@shanesmaineshop 3 жыл бұрын
Just found your channel, the issue with my vizio is all the input ports stopped working so we cant plug anything into it. Lots of great stuff on your channel, I also try to help people save money by fixing thigs. Thanks for sharing.
@keithlillis7962
@keithlillis7962 5 жыл бұрын
Impressive, but how did you diagnose it was that actual transistor? There was a lot of stuff on that board.
@TechProFury
@TechProFury 5 жыл бұрын
Testing multiple things, then put back together, then make video. Or.... research issue on model and see it is very common failure, then make video hoping it works ..
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
Probably read up on it on a repair forum online ...
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
Oh, he answered that same question in another comment - watched a different KZbin video!
@wilconbarro3469
@wilconbarro3469 5 жыл бұрын
Less than $1 if you have tools ready
@BB-ce3bj
@BB-ce3bj 5 жыл бұрын
And schematicvs of the module, probably not less than $20. No chance he weould get the right transistor type from that marking alone...
@almaefogo
@almaefogo 5 жыл бұрын
@@BB-ce3bj making he looked in an online forum where someone had the same problem
@gwarlow
@gwarlow 5 жыл бұрын
Wilcon Barro Yes. As with most repair jobs of any type, you will need tools. They probably cost a lot less than the repair shop or the price of a new TV though.
@jameszorb8420
@jameszorb8420 5 жыл бұрын
Multi meter is like 20 bucks at Walmart. Soldering iron 10-15 Flux 3-4 bucks or free with soldering iron "Fume extraction" get a house fan Hot air shit not necessary and most likely you'll damage something else if you don't know what your doing not worth the risk
@jameszorb8420
@jameszorb8420 5 жыл бұрын
Les then 40 and you'll have useful tools in the future just in case.
@ADAM_RECORDS_LIVE_OCTAVERN
@ADAM_RECORDS_LIVE_OCTAVERN 4 жыл бұрын
I have a 60 inch LG plasma that needs a similar repair. But I’m so scared To break it even more and I’ve never seen the tools you’re using before in my life other than just a basic solder gun. The TV is 600 W to run but it’s bright as the sun and crisp as a rainbow. I repaired it once by replacing the motherboard but accidentally gouged a little piece of solder.. stopping it from Booting up all together. I’m very confident that your technique will allow me to repair this incredible plasma. Just need to know more about the tools to get me there
@jchappy362
@jchappy362 5 жыл бұрын
That's GREAT! I have to same problem, just one question, WHAT IS THE PART NO, SPECS, HOW DO I GET ONE?!
@RAYTHEONGAMING
@RAYTHEONGAMING 5 жыл бұрын
Touch a 300v capacitor and it'll enlighten you to the dangers of home TV repair. That being said its a miracle my heart hasn't exploded over the years.
@mrreisskeks3441
@mrreisskeks3441 5 жыл бұрын
I mean... we got taught that if we ever wanted to open anything with big capacitors we should wear protective gloves and prioritize discharging of the capacitor.
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
Yeah, but not as bad as touching the high voltage contact on a CRT ... I’ve seen that knock someone flat on their back side...
@yrly59e
@yrly59e 5 жыл бұрын
I garbage picked a gateway plasma going on 6 years ago (I fixed it on July 4th while I was off). Replaced $12 worth of capacitors on the power supply board and a sub sound board it has. Still working today.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
That is awesome!
@Dolko71
@Dolko71 5 жыл бұрын
Well but if you don’t know where to look, its an awfull amount of transistors and capacitors to test.
@arronrodgers6673
@arronrodgers6673 6 жыл бұрын
Have the exact tv and the same problem. Your fix worked great! Thanks!!
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Cool! Thanks for letting us know.
@FrugalRepair
@FrugalRepair 6 жыл бұрын
​@Enoch Pedersen I put the specs in the description so anyone can hunt down online for a good price/option. I'd would first check on aliexpress if you can wait for it to arrive from China. Otherwise, check with any of the US suppliers.
@MrHontas83
@MrHontas83 5 жыл бұрын
@@FrugalRepair i have the same tv model but the 70 inch .....e701i-a3 with the same exact problem. so this will work with the exact part u replaced with?
@FrugalRepair
@FrugalRepair 5 жыл бұрын
@@MrHontas83 The tcon board would be the same. You would need to either test the tcon board for other failures in addition to this transistor to make sure or you can replace the transistor and see if it worked. It is very possible that there are more bad components on the tcon and it is possible that your lcd is bad and thus not repairable. You can also simply buy another tcon board on ebay for like $17 and pop it in quick to see if it fixes the tv.
@MrHontas83
@MrHontas83 5 жыл бұрын
@@FrugalRepair where do I get the machine to test and what's it called
@BigAlWillis
@BigAlWillis 5 жыл бұрын
there was a great TV repair shop down the road for many years. The guys that worked there were honest & fair, once not even charging me at all for a overheated receiver. sadly with the cheaper almost disposable TV's from overseas now many people just toss them out rather than try to have them repaired. This being the reason the TV repair shop had to close. just wasn't enough business.
@starburstphilly1
@starburstphilly1 5 жыл бұрын
How did you determine which transistor to get?
@mra6308
@mra6308 5 жыл бұрын
model number on the trans maybe ?
@thinkman2467
@thinkman2467 5 жыл бұрын
It was probably a common issue with this set.
@NexusXP
@NexusXP 4 жыл бұрын
@RS2002 He checked online for people with the same issues as his TV.
@stevebabiak6997
@stevebabiak6997 4 жыл бұрын
He said in another comment that he watched it on a different KZbin video!
@jammy46235
@jammy46235 6 жыл бұрын
Can you help me fix my flux capacitor I’m stuck in 2018 need to get back to 2055 😁
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Haha! One of the best comments on this video. =)
@PurpleSanz
@PurpleSanz 6 жыл бұрын
No wonder your flux capacitor failed. It says "made in Japan".
@crapcbm
@crapcbm 5 жыл бұрын
good electronics only come from Japan :)
@swinde
@swinde 5 жыл бұрын
Just add new flux.
@rich1051414
@rich1051414 5 жыл бұрын
Did back to the future fuck the time line? Do we ever get flying cars?
@johnleach7879
@johnleach7879 4 жыл бұрын
As an EE, I salute you for the knowledge of an appliance, plus the incredibly small working parameters. I've never thought of using a heat gun in lieu of an iron, however small.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! I studied computer engineering, all those EE classes have definitely helped me understand what components are and what they do.
@samuelhepburn2636
@samuelhepburn2636 4 жыл бұрын
@@FrugalRepair so when the screen is black it's most likely the T.comm board and not the main board,I'm asking for a friend. .....
@johngullo9420
@johngullo9420 4 жыл бұрын
“You need really steady hands for this.” Damn. Count me out. 😀
@friedmule5403
@friedmule5403 5 жыл бұрын
May I please ask you a few noob questions, I am not criticizing you but honestly try to learn from you:-) 3:22 why do you choose hot air instead of bent thick copper wire wound around your soldering tip? why do you not use something like capton tape to shield the other components from the hot air? Hope you please will teach me, so I better understand.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
I hadn't thought about bending coper wire on a thicker soldering iron tip. That is a neat suggestion if you don't already have one with a fine tip. It still might be hard to solder in a small component in a tight spot with that setup. I'll have to try it sometime. I didn't feel the need to add kapton tape since the nozzle is small enough and the hot air can be directed to the one component. It depends on what work you are doing though. When working on an iphone board, for example, I may use kapton tape and place a metal coin nearby to help absorb some of the extra heat.
@friedmule5403
@friedmule5403 5 жыл бұрын
@@FrugalRepair Thank you for your great answer. About the copper wire, I find a thickness that I seems to fit the task and then start to bend it until it sits nice around the chip and let the tweezers and heat do the rest:-) Also wary nice and hard to reach places, like under a capacitor, in the corner near some plastic. You can always put an insulating tube around the 4 inch long copper, if necessary. :-) Your explanation about the heat gun, do make a lot of sense, I do just not have enough confidence and knowledge yet to dare that. It takes a bit of knowledge as you clearly have!:-)
@superque4
@superque4 4 жыл бұрын
This is BY FAR the most satisfying channel on KZbin! Subbed!
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Wow, thank you! Such an encouragement! Many more videos to come.
@superque4
@superque4 4 жыл бұрын
I like fixing stuff (cars, Electronics, i.e. whatever breaks around the house) and nothing compares to the feeling of knowing you just saved your self big bucks or, even better, now can sell something that was worthless yesterday. I've got a couple of flat screens that you've encouraged me to tackle now. Cheers
@FrugalRepair
@FrugalRepair 4 жыл бұрын
That’s great to hear!
@FreshtexBlackman
@FreshtexBlackman 5 жыл бұрын
Seems somehow you forgot the word "Repair" from your title.
@elpasomyk
@elpasomyk 5 жыл бұрын
It’s in the thumbnail
@fleximo3734
@fleximo3734 5 жыл бұрын
But not in the title.
@yanz1232
@yanz1232 5 жыл бұрын
@@fleximo3734 Not required on the title , he got it for free then had to spend 54 cent.. so yes its a 60'' Vizio he got for 54 cent ( .. plus his own work time )
@fleximo3734
@fleximo3734 5 жыл бұрын
​@@yanz1232 Title is simply missleading because it says he got a 60" tv for less then a dollar when actually he bought a component to fix/repair it. Yes he got the TV for free and cost him less then a dollar to fix it.
@campkira
@campkira 5 жыл бұрын
Brickbait...
@fuhadt3286
@fuhadt3286 5 жыл бұрын
Oh,, your tv is dreaming inside a dream..😱😱
@angelodagnolo984
@angelodagnolo984 4 жыл бұрын
I did tv and radio servicing C&G 224 many many moons ago, it was all analogue back then everything was solid state..... very easy to fix compared to these smd's you deal with, respect to you.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks! The biggest hurdle I find is lack of schematics and board views. It takes a lot longer if you have to reverse engineer stuff to figure out the problem.
@mirandalondon5432
@mirandalondon5432 5 жыл бұрын
It was painful to watch you trying to work with those tweezers lol
@michaelhenderson5098
@michaelhenderson5098 5 жыл бұрын
I would be the same way. That is a small transistor. I get the shakes when soldering small stuff also. :(
@misterunchained7065
@misterunchained7065 5 жыл бұрын
yeah i cant bear to watch him using those tweezer
@lexander9686
@lexander9686 5 жыл бұрын
Same feeling
@Darmidion
@Darmidion 4 жыл бұрын
Oh the perfect people can't stand it. Must be nice to be so flawless. Douchebags.
@GenerationXT
@GenerationXT 4 жыл бұрын
@@Darmidion, No one is claiming perfection. It's simply about avoiding damage to the board. Rocking a component like that before the solder reaches it's melting point, can rip the pad right off the board. Definitely not a fun situation to deal with.
@brianl9342
@brianl9342 6 жыл бұрын
I repaired my 10 year old $2400 Samsung LCD for $3.50 by replacing 2 bad capacitors on the power supply
@mortimergladbreath
@mortimergladbreath 6 жыл бұрын
I find that the longer I live, the more capacitors I have to replace!
@xcruell
@xcruell 6 жыл бұрын
Yeah i had a pretty similar case once, where i just had to replace one cap. Kinda funny how easy it is *some times*
@joelr877
@joelr877 6 жыл бұрын
Samsung TV's from 8-10 years ago were notorious for a bad batch of electrolytic capacitors. The company did a great job of repairing as many TV's as possible within a reasonable warranty period but you can only do so much. I repaired one 2 years ago that was out of warranty, for a friend. Capacitor kit was $12, shipping was $8. I volunteered my time(less than 2 hours) For $20 she had a functional 46" TV. Still works great today.
@Phillguy
@Phillguy 6 жыл бұрын
I did the exact same thing! Always check to see if what ever you have has a fixable problem.
@FrugalRepair
@FrugalRepair 6 жыл бұрын
Great job fixing it!
@polkadotz666
@polkadotz666 11 ай бұрын
Good instructions thanks. This might be the repair needed for one of my two Vizio's crashing in the same two weeks. I'll explain both situations and hopefully you can share your thoughts on diagnosis. TV. #1, Backlight certainly works but losing color, contrast and brightness as the picture is starting to blacken out in top left corner and bottom right...almost is rectangle shapes in each corner. Picture is good after a rested restart and the problem quickly creeps back in. TV. #2, our oldest Vizio maybe 8 years, 50". First sign of a problem was the quick App start brand bottoms at the bottom of the modern FireStick would change the TV input to an unused port. Next problem it would blackout and flicker back on with clear white horizontal lines. Then it flickered until it don't come back. After long rests it worked again a couple times, V logo came up, with sound, and was back out within 10 minutes. Now it's out-out with no sound of the FireStick clicks changing the Apps, no V logo and all black screen...no backlight. With was a 2 month fading experience from beginning to end.
@rosstintatious
@rosstintatious 5 жыл бұрын
Way too much flux. But good job fixing it!
@SAZodia
@SAZodia 5 жыл бұрын
The bigger the glob, the better the job - Louis Rossman - 2017
@hafcanadiana318
@hafcanadiana318 4 жыл бұрын
You didn’t clean the flux residue off. At least wipe the area with a flux cleaner pen as a final step.
@andrew_koala2974
@andrew_koala2974 4 жыл бұрын
Enough FLUX to do a plumbing repair and far too much SOLD ER.
@roz1495
@roz1495 5 жыл бұрын
Oh man! I could beat this guy at a game of Operation!
@LessThanHandy
@LessThanHandy 5 жыл бұрын
Heck yeah!
@celticlion8357
@celticlion8357 5 жыл бұрын
HAHAHAHAHAHA!!!
@jreinel1966
@jreinel1966 4 жыл бұрын
great to see some smart individuals fixing and not replacing,fix fix fix
@FrugalRepair
@FrugalRepair 4 жыл бұрын
Thanks!
@leec2106
@leec2106 5 жыл бұрын
i get the hot air for removing, why not just solder the part in?
@raymondo162
@raymondo162 5 жыл бұрын
no. and yes.
@lexander9686
@lexander9686 5 жыл бұрын
So he can show you how Shakey he gets under stress
@Nancy-xg9nc
@Nancy-xg9nc 5 жыл бұрын
@@lexander9686 what have you done troll?
@rayray6548
@rayray6548 5 жыл бұрын
Screwdriver $4.00 Multimeter $154.99 Electronic toolkit $30.00 Anti-Static Soldering Mat $20.00 SMD Transistors $0.54 Hot air station $637.00 Solder Station $703.78 Fume Extraction Station $69.99 Total: $1,620.30
@tabascocrimson7865
@tabascocrimson7865 5 жыл бұрын
i can do this with less than 100$ of equipment, gearing from scratch. Don't be silly.
@nagyfiuk3545
@nagyfiuk3545 5 жыл бұрын
150for a multimeter ? 700 for a soldering station? 637 FOR A HOT AIR STATION? 70for a fume extractor? Dude have you lost your mind
@andrefelixstudio2833
@andrefelixstudio2833 3 жыл бұрын
Thats amazing, my brother did this to his TV and got it to work just fine, thank you for the video and pointing people in the right Direction!
@FrugalRepair
@FrugalRepair 3 жыл бұрын
That’s great to hear!
@vanroboli
@vanroboli 5 жыл бұрын
Smartass guy... 0.54 cents for a transistor, 2 hundred bucks for the tools... knowledge, practical work and warranty are priceless...
@ericrann
@ericrann 5 жыл бұрын
Vanderlei Oliveira yeah but you could do it with $30 - soldering iron, solder, and desolating pump/wick
@jong2359
@jong2359 5 жыл бұрын
@@ericrann but that requires more than 54 cents worth of common sense ;-)
@TheMrjogas
@TheMrjogas 5 жыл бұрын
Most parts cost pennys its not some miracle here .the rest price for repairs comes with cost of tools, experience ,knowledge , rent ,workers ,vat And many other things.most people will break fixing.please at least tell people with risks opening TV by getting shocked etc.To me this video informative because i do fix stuff.for other canbe last thing they touch 🙌
@jameslinden6304
@jameslinden6304 5 жыл бұрын
That part was big enough not to use hot air, but if you do, solder paste works much better than wire. Melts more evenly and you don't have to keep tweezers on it. It also might help if that board had some heat sinking. Thanks for the video!
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks! Great idea.
@ergindemir7366
@ergindemir7366 5 жыл бұрын
Good job, since it costs you .54 I can pay you 1.08 plus shipping if you send it to me. That's a whopping 100% margin.
@v1ncen715
@v1ncen715 5 жыл бұрын
nope, that's 50% margin.
@v1ncen715
@v1ncen715 5 жыл бұрын
@XBOXRULES that's 100% markup, 50% margin
@v1ncen715
@v1ncen715 5 жыл бұрын
@XBOXRULES Why are you talking to me I am a failure at math.
@v1ncen715
@v1ncen715 5 жыл бұрын
@XBOXRULES Just because you are too lazy to google how to calculate a margin rate should not be an excuse to be so pedantic.
@v1ncen715
@v1ncen715 5 жыл бұрын
@XBOXRULES Well ROI is also 100%, I did not say otherwise, and you are still wrong you dumb fuck. Here math genius, even on bing you can find a calculator bfy.tw/O5Cz
@KevinColt
@KevinColt 5 жыл бұрын
i fixed my broken tv by throwing it off the window it worked just as intended
@davidpolk1877
@davidpolk1877 5 жыл бұрын
I am amazed that you repaired a 60 inch television for 54 cents! If it is not too much trouble of me asking. I have a 32 inch smart television that was exposed to below freezing temperatures for so long that when I turn it on the screen looks like cracked glass and makes no sound. Is it repairable or should I throw it in the trash?
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks! It was a fun repair to do. For your tv, it depends, if the lcd is cracked then unfortunately, you can’t repair it. Can you perhaps look at internet images of cracked lcd screens to see if yours looks like those?
@richardmiller3781
@richardmiller3781 6 жыл бұрын
I pickup tv,s like this all the time and fix for pennies.
@eldontyrellcorp
@eldontyrellcorp 6 жыл бұрын
The most interesting part is missing : your investigation and all the tests you did to conclude it was this component.
@thinkman2467
@thinkman2467 5 жыл бұрын
It was probably a common issue with the tv
@Nopaants
@Nopaants 5 жыл бұрын
I agree! Anyone can fix anything. You just need to research and learn then put into practice. Not having access to circuit board tools, I go a slightly more expensive way by purchasing the complete component, in this case, replacing the entire board. Remember how you remove the original and then install the new board........ I never pay for anything to be serviced. You wouldn’t believe how easy it is to work on most things. Companies want their product as easy (cheaply) as possible. Research, comprehension, practice.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks for your comments. So many things are easily repairable but end up by the side of the road. A little internet searching and some reasoning goes a long way. And I agree, for most people and for speed, it is easier to replace the whole board.
@MrHBSoftware
@MrHBSoftware 6 жыл бұрын
it would be interesting to show the diagnostic procedure and not just replacing a transistor, everybody can replace a transistor. testing the transistor on circuit is useless, more than often there is dc path around them by resistors and other components or even some other shorted component can create a dc path around the transistor. also that transistor is shorted but if it was open like often happens the beep or continuity test would be useless, it doesnt beep so in your line of thought it is good. try to go a little more in depth next time please. if somebody is uneducated in electronics hthey will learn nothing from this video and if the person has electronic knowledgde they will learn nothing either
@FrugalRepair
@FrugalRepair 6 жыл бұрын
I don't know if I would agree that "everybody" can replace a transistor. I understand you may want more in-depth board level diagnostic explanation but that isn't really the point of why I made this video. One of the big points of this video is to inspire people that things can be repaired inexpensively and I give an example of how it can be done on a tv that would otherwise be thrown away. If you happen to have the same t-con board and it failed, at least I've helped you with a starting point in your diagnosis and repair. And yes, there could be other damaged components but in this case, it was the only issue (like in many cases) and the tv was repaired.
@ethelryan257
@ethelryan257 6 жыл бұрын
Hey, here's an idea. Why don't you set up your own channel and do it yourself? Sheesh.
@JNET_Reloaded
@JNET_Reloaded 6 жыл бұрын
he did with a multimeter lol
@kaisersmith1
@kaisersmith1 6 жыл бұрын
@Prottoy Nahian nearly all youtubers list the products they use in the description. He didn't make a big deal about any of the products, not at all dishonest.
@BW022
@BW022 6 жыл бұрын
Hugo... other way around. Maybe 1 in 10 of my 1990s computer engineering class could solder and almost none of use would solder surface mount parts on an existing board. I spent four years on design and assembly involving such hands on work and I never got good enough to solder surface mount components. I would have attached wires to the transistor and soldered the wires on -- rather than try surface mounting such a tiny component by hand. Anyone with the skill to solder surface mount parts by hand can trouble shoot a board -- they are either in repair or assembly work with the later trouble shooting their own work. Nor is it a terrible interesting video to look where the video power on/of line in coming in and then track its path and touch both ends with a multi-meter.
@Anuitu2u
@Anuitu2u 5 жыл бұрын
Apple prohibited you to repair your own thing. Even, blocked you from the forum.
@goku445
@goku445 4 жыл бұрын
Oh they certainly flagged the video as p0rn as well.
@mrmike501
@mrmike501 5 жыл бұрын
I know this is old but you just gained a new sub, i have 2 65" tvs that were replaced by LG a 2016 model and the other a Vizio 2018 model by Best Buy...i followed this Video and fixed both now i have 2 new 65" Vizios and a decent LG..THANKS
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Great job fixing those tvs! By chance, did you have a problem with the power supply on the 2016 LG 65"?
@mrmike501
@mrmike501 5 жыл бұрын
@@FrugalRepair no i actually swapped out the tcon board and the Visio had a bad conduit on its tcon board
@1dariansdad
@1dariansdad 5 жыл бұрын
Wish I could like twice.
@Fanta....
@Fanta.... 5 жыл бұрын
create a second account you lazy sob
@stewiegriffin6503
@stewiegriffin6503 6 жыл бұрын
heart surgery has also only 2 $ materials cost , but you pay 300.000 $ for it. This is wrong way to put things into perspective. it's never about the material cost but the skills.
@FrugalRepair
@FrugalRepair 6 жыл бұрын
I see your point but I would argue this is different. You don't need to repair your tv, you can buy a new one at the store. But if yours is broken and you are going to throw it away anyway, then why not give it a go and try to fix it yourself? In the case of this tv, you can literally buy a new tcon board on ebay for $17 and put it in very fast. What I am showing is that you can do even better than that if you wanted to try. And you don't need expensive tools, buy a cheap soldering iron or hot air station and watch a few videos to educate yourself.
@stewiegriffin6503
@stewiegriffin6503 6 жыл бұрын
I agree with you. You and me can do that. But the title "for less then 1$" degrades the value of our work implying to others that our work is cheap. e.g. here is true story : there was a TV repair shop in my city, after his TV was repaired customer asked what was wrong with his TV, and the owner said, it was a resistor. Then customer left and actually brought the new resistor to the owner, and said here is it. It is dangerous to reduce the work to the cost of spare parts, leaving out the practice and eduction of decades, because the most people don't get it.
@slyztercoreveanged3175
@slyztercoreveanged3175 5 жыл бұрын
replacing those logic board still cost less than buying new tv...the expensive part is actually the LCD which i can assure you if your LCD is broken it could cost almost the same to buying new TV...maybe more than 80% of the cost from buying new TV...while replacing new logic board maybe cost like 10-20% of new TV...but if you have the skill repairing the logic board sure cost less...but if you dont have the skill replacing logic board is easy and should not use much of skill..so even if you send to repairman they should charge less if only replacing the logic board...
@Fanta....
@Fanta.... 5 жыл бұрын
@@stewiegriffin6503 All your story does is reaffirm that most customers are morons
@stewiegriffin6503
@stewiegriffin6503 5 жыл бұрын
@Fanta I would go even further an say most humans are morons.
@miguelespinoza65
@miguelespinoza65 Жыл бұрын
Hi, i just want to thank your video, mate. I repaired a Sony 60'' with the same symptom. But in addition in my situation, i had to cut the left cof tabs. The MOSFET used in my case was the Si2308BDS.
@fshimage
@fshimage 5 жыл бұрын
forgot to tell that you put _i dunno how many years of study_ your knowledge under 1$ price. but well done.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks. I think you give me too much credit though. I don't think soldering in one component takes years of study and knowledge.
@fshimage
@fshimage 5 жыл бұрын
@@FrugalRepair :) ty. Maybe not many years but you have a background to do this. I understood the real meaning if this vídeo. I didnt meant to be rude...
@FrugalRepair
@FrugalRepair 5 жыл бұрын
@@fshimage No problem, thanks for your comments.
@thinkman2467
@thinkman2467 5 жыл бұрын
@@FrugalRepair at all. Actually I think using a heat gun was the hardest part. For one component with three leads you could of even used just solder and a soldering iron and popped one lead or leg at a time. But doesn't matter the job got done and the set now works.
@comixof2morrow
@comixof2morrow 5 жыл бұрын
where can I buy those little chips without having to buy 1000 of them?
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Search online with the specs I gave. Aliexpress has them or equivalent mosfets in lower quantities. arrow.com and possibly ebay too. Of course you can buy from other chip sellers too.
@JohnHilman1968
@JohnHilman1968 5 жыл бұрын
Good job. I just use an iron and solder wick to remove and flux and solder and iron to replace. Though your biggest challenge was holding it steady while recording and you did good considering.
@FrugalRepair
@FrugalRepair 4 жыл бұрын
I designed and installed my own 15,600W solar panel system on my house. It will be a new video series later this summer (after a few more videos like this one) Check out a sneak peak on my website: frugalrepair.com/solar/
@sebastianalexander7730
@sebastianalexander7730 3 жыл бұрын
Hi I have a Bluetooth speaker I found out that is the power switch
@iguanapete3809
@iguanapete3809 5 жыл бұрын
Great vid but you need to sw to decaf.
@zytechnology
@zytechnology 5 жыл бұрын
LOL
@johnbisset4504
@johnbisset4504 5 жыл бұрын
Typical in any sort of repairs, the part is cheap, but the knowledge and know how, takes years. And it appears, very steady hands, and the tools to do the job. Nicely done. While I was younger, and better eyesight, I may have been tempted to try a repair. These day, I’d throw it out and buy a new set. Or if I were lucky, find someone with your skills and pay for your talent.
@FrugalRepair
@FrugalRepair 5 жыл бұрын
Thanks for your comment. Actually with the internet diagnosing a board that has a common failure doesn’t have to take very long. It is because other people find the faults and share the info online. Those issues that no one has come across before (or posted about) are ones that can take a bunch of time to track down the culprit(s).
@TrebleWing
@TrebleWing 5 жыл бұрын
"Only $0.54!!" > using $500 rework station.
@EnricoConca
@EnricoConca 5 жыл бұрын
That transistor could have easily been replaced with a 10$ soldering iron, given that it wasn't connected to a large plane with high thermal mass.
@raymondo162
@raymondo162 5 жыл бұрын
coulda done it with just the soldering iron...…….
@alphabeets
@alphabeets 5 жыл бұрын
...and $50,000 for the college education to learn HOW to find the problem component(s).
@dennisp.2147
@dennisp.2147 5 жыл бұрын
The part could have been replaced, and probably far more accurately, by a $10 pencil iron.
@StarmanDX
@StarmanDX 5 жыл бұрын
@@alphabeets Of course, because you definitely need an expensive college course to learn things nowadays when the internet is so widespread.
@Apathymiller
@Apathymiller 5 жыл бұрын
Lol, good video. Only a 50cent replacement part and a 200$ hot air machine.
@therealb888
@therealb888 5 жыл бұрын
the jokes on u, u can do it with $5 soldering iron and $1 flux too
@tonyandre2905
@tonyandre2905 5 жыл бұрын
@Joshua I agree with you. The tools this guy used to test and assemble, definitely cost more than a few cents, lol 😂
@michaelderosier8788
@michaelderosier8788 2 жыл бұрын
Great video, I found the same model, tcon replacement brought tv to life, however even 1 inch horizontal line especially on black parts of screen. Don’t see much during video games but very obvious during movies. That a panel problem right?
@Thegobstopper61
@Thegobstopper61 5 жыл бұрын
I replaced my wife for two balloons and a gold fish.
@saltysoysauce954
@saltysoysauce954 5 жыл бұрын
Good deal
@franksmith4316
@franksmith4316 5 жыл бұрын
Where is she buried?
@Thegobstopper61
@Thegobstopper61 5 жыл бұрын
Behind the shed Frank. Though l did leave her bum sticking up out the ground as l needed somewhere to park my bike.
@franksmith4316
@franksmith4316 5 жыл бұрын
Love Ha Ha Ha!
@phillyfans5641
@phillyfans5641 5 жыл бұрын
🤣🤣🤣🤣🤣
@LouisEmery
@LouisEmery 5 жыл бұрын
Yeah, 54 cents part but $8 shipping and handling. ;)
@smv133
@smv133 5 жыл бұрын
Not really, you can a lot of stuff shipped for free from aliexpress.
@phatthichcamauni4095
@phatthichcamauni4095 4 жыл бұрын
...to me, it is very good news to watch during the lockdown of COVID-19 ...
@imbissbronko6581
@imbissbronko6581 5 жыл бұрын
i thought you were dave palumbo lmaoo 😂😂😂
@TheLeathal0ne
@TheLeathal0ne 5 жыл бұрын
Wow 54 cents? Minus the $200 hot air station The $60 soldering iron The $10 flux
@gabrielbennett977
@gabrielbennett977 5 жыл бұрын
You dont just wake up one day with all the tools and knowledge of a skilled trade...!? Wtf We should complain to the government about this discrimination against ignorence.
@LBZDreamer
@LBZDreamer 5 жыл бұрын
Soldering irons are cheap though
@MonzaRacer
@MonzaRacer 5 жыл бұрын
store.rossmanngroup.com/index.php/quick-861dw.html! Less than $300
@xander1756
@xander1756 5 жыл бұрын
And still cheaper than buying a new 60", plus those tools can be used over and over to save even more money. But most folks go for the convenience of replacing today's flood of crap quality products. But manufacturers know this about human nature, hence the intentional crap quality. Convenience saves time, but costs you far more than you realise over the long term.
@angelovazquez7920
@angelovazquez7920 5 жыл бұрын
And the electricity
@Solder_king
@Solder_king 5 жыл бұрын
I don't know if you couldn't use the hot air gun due to camera constrictions but it works a lot better if you can circle all the joints and not just focus on one side. Great video!
Can I Fix a BIG TV for Less Than a $1?
7:29
FrugalRepair
Рет қаралды 7 М.
WATCH THIS VIDEO BEFORE FIXING YOUR LED LCD TV
10:09
TampaTec
Рет қаралды 523 М.
Noodles Eating Challenge, So Magical! So Much Fun#Funnyfamily #Partygames #Funny
00:33
ТЫ В ДЕТСТВЕ КОГДА ВЫПАЛ ЗУБ😂#shorts
00:59
BATEK_OFFICIAL
Рет қаралды 4,6 МЛН
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 228 МЛН
Video to highlight the problem of repairing flat panel TV sets
24:14
Michael Dranfield
Рет қаралды 379 М.
How to check fuses, diodes, transistors, voltage regulators
10:28
TampaTec
Рет қаралды 1,3 МЛН
DIAGNOSE a Broken TV Without Tools - Tricks Revealed
11:19
FrugalRepair
Рет қаралды 72 М.
Samsung 860 Evo SSD Repair- Data Recovery Lab said it wasn't possible.
14:44
Vizio TV Turns On, But No Picture FIX (UPDATED)
8:35
iDevice Repair - iPad iPhone Macbook TV Repair
Рет қаралды 74 М.
Why LCD is not displaying?
5:15
Vcore LC
Рет қаралды 526 М.
No VGH No Video
17:43
tevz TV
Рет қаралды 764 М.
This SNES Game is Worth Around $400 IF I Can Fix It!
20:18
TronicsFix
Рет қаралды 712 М.
Noodles Eating Challenge, So Magical! So Much Fun#Funnyfamily #Partygames #Funny
00:33