07 Kawasaki 636 motor on a go kart frame extended stretched its gonna be a beast
Пікірлер: 70
@MAXANDAD15 жыл бұрын
THANKS FOR THE WRITE BACK... I am very impressed to the build of this project thank you for sharing it. It goes to show how much work is involved. again thanks
@cxbra14 жыл бұрын
GREAT start! Nice to see you made a much wider chassis than most peope do for the bike-engine swaps. I bet it will handle nice.
@ollieal9615 жыл бұрын
Ive never seen a 4 cyl quad before. But man now I wana see one!!! SWEET!
@Gen3Benz15 жыл бұрын
who am i kidding.....the acceleration of this thing is going to be mind blowing....no matter what the gearing :-D
@trvlnlight15 жыл бұрын
Dude, Safety glasses for the love.
@jdmfreak199215 жыл бұрын
Lol that will be an interesting story to tell your doctor when there pulling out pieces of piston skirt and rod out of your back from when it blew up.
@zx636d6f14 жыл бұрын
An 07 636 motor huh.....must be one rare SOB!
@stvnswld15 жыл бұрын
Wow, impressive work!
@Fixitalls15 жыл бұрын
sweet love how small the axle sprocket is 2nd gear is gonna fly
@scrumtios015 жыл бұрын
holy beastly!! im in love!! haha do you have more vids?? you should get some up this is awesome!!
@normellow16 жыл бұрын
You must understand that this kart will tear the fabric of time and matter!!!!!!
@DanK4o89 жыл бұрын
kawi only made the fuel injected 636 in all countries from 03-06 euro got a carbureted 636 in 2002 that was actually a J model engine (00-02) bored and stroked to achieve the 636 displacement. For 03 they redesigned the head and head mounting points as well as added fuel injection and a high pressure fuel pump moved into the gas tank. Kawi was still backing racers in the 600 class so from 03-06 they also made a limited production of the "ZX-6RR" (vs the 03-06 ZX-6R OR ZX636 OR JUST 636) which was the same redesigned engine but 600cc with the addition of a slipper clutch for race track purposes. they actually brought the 636 option back in 2013 I believe and still running it as their flagship.. great bike.
@Xempt_One12 жыл бұрын
yea, my mate on my course is going to start building one with a low powered engine though...should be fun
@normellow13 жыл бұрын
It's not easy putting one of these things together, you have to have a working motor with all the bits. Also you need a food fabricated that has all the right tools .
@kluuc12 жыл бұрын
I clicked on like just because i heard linkin park on the back 4:16 (and i love motors:P)
@Xempt_One12 жыл бұрын
yea, we're gonna do a hacked up job and design a frame using spare metal and that, plus use the parts off my pocketbike (ie. wheels, brakes) getting a motorbike engine would be alot better though
@koolvideos12345678916 жыл бұрын
how far did you have to extend the frame? did u upsize the brakes? Great video amazing kart. u should post one of it running. good job
@And4ea815 жыл бұрын
You'r nuts man!That is a freaky monster!How transsmision you use???18/26,30???
@thagoose48013 жыл бұрын
nice id like to build one like that but i l know id lose interest halfway through....id tell you to put on glasses but the other 133 comments have that coverd....best of luck that things gonna move when its done i hope you didnt get any burn marks on them yellow toys in the back
@sod1614 жыл бұрын
@Gen3Benz the tires would heat up and explode, the engine would over heat and explode, the chase will snap. His neck would break.
@Gen3Benz15 жыл бұрын
Yikes, try to wear some safety glasses. The first time you go to the eye doc and he breaks out the drill to get the metal chunks out....you will learn. Dont ask how I know... The driven sprocket seems to be pretty small for this engine. Being that it revs really high you might want more gear reductions for more torque down low. Unless you want to go 200mph :-D
@Zanith5014 жыл бұрын
me and my mate are making something like this but the engine goes behind the seet and we are making the kart longer so its doable
@gindoin216 жыл бұрын
nice kart y am tring too build 1 too whit a kavasachi engine 600cc z
@akaeldin15 жыл бұрын
At least the welding sounds good. Did you ever get it going?
@MAXANDAD16 жыл бұрын
hey if you have info on short wiring one of these 636 I really needed it I am building a hillclimber and trying to elimenate all the wiring I am going to have an started that will hook right up to the crank so any insite would be great.
@revhard0515 жыл бұрын
its funny they had all this shit but they didnt have a table to put it on as they worked..lol
@rubioo9314 жыл бұрын
i wanna see the video were u take this out and rip it apart
@hcracer198513 жыл бұрын
hey man, hows the build coming? i wanna see the finished kart, i wanna do this but i need some ideas
@Eman42513 жыл бұрын
you extended the back on one side ............so your right front tires not gunna match with the back right tire ? am i right ...
@gegoff1112 жыл бұрын
what type of gear box do u put in the kart because im stuck on my 600cc go kart and i dont know how to covert the motobike gears to gears that will work on the kart..
@chceCukierka12 жыл бұрын
Po tym jak on to pospawał ja bym na to nie wsiadł :P
@slikbmxgeorge15 жыл бұрын
pull start a 600cc motor? good luck with that =]
@MrPirate7113 жыл бұрын
No goggles and no shoes either. I would bet money this thing is laying in a heap of parts somewhere, never to be finished.
@ollieal9615 жыл бұрын
Yah I know that I was just telling powderhogged guy that.
@andresrocha81605 жыл бұрын
@mikehassrider440 how many feet did you guys extend the frame?
@airsoftking1916 жыл бұрын
were is the test drive?
@dfredrich14 жыл бұрын
OSHA poster boy, OK, no kidding around. Dude, please for your own sake, Get some safety glasses, remove the bright red gas can from where you"re grinding and welding. Would like to see the finished project.
@bargolan815 жыл бұрын
does someone know where can i get metal to design my go kart frame? or if i need to buy it so where can i buy it and how much do you think will be the price? ohh and another thing what kind of metal do i need to use and what will be the thickness of it?
@slimshady2121G14 жыл бұрын
making one but im using a 606 4 barrel
@TheMat151113 жыл бұрын
G'day could you tell me how long you extended the chassis??
@LygerTheCLaw15 жыл бұрын
now that the motor is where the driver sits, who is going to drive the kart? try lengthening the frame..
@alin29014 жыл бұрын
hehehe .. i got 2 go karts,an yelow quad ...but i dont have a bike ...anymore....and i kinda miss it.......well did you finish it or what?
@BarrettSnow12 жыл бұрын
How-to-Build a Super Go-Kart "Plans" Now Available
@KingMotorsportPhotog11 жыл бұрын
try some eye protection with that grinder 8-0
@spencercheevers14 жыл бұрын
where's part 2?
@Chozenfew7314 жыл бұрын
Did u finish it? is there an update?
@texasrebel9813 жыл бұрын
dude wear safety glasses!! please!!
@nomadben14 жыл бұрын
@bradandjustinproduct hahahaha i think its funny as fuck
@jnewbon0015 жыл бұрын
tell u all now i wouldnt be griding any where near my throtle bodies !! go cart or not
@J_Cal15 жыл бұрын
motor mounts look skimpy
@aussiekartman16 жыл бұрын
Why does the dude keep looking at the camera while grinding with no goggles? He'll lose fingers, toes or an eye one day.
@thiagopalmares2013 жыл бұрын
Entre no meu perfil e veja um video que eu postei, Uma mulher de 50 anos que sai empinando em uma moto CBX TWISTER 250 CILINDRADA , muito bouah a corôa na moto .. é só vocês vendo e ficar impressionado ...
@grandtheftauto123316 жыл бұрын
its probly ur clucth, have u checked, u may need a new one
@Reroy5515 жыл бұрын
using a grinder with no saftey glasses and the grinder has no guard on it and there gasoline in the shop this kid will never live to be 21 years old
@JulianVR415 жыл бұрын
There's only one thing i see wrong with this....there is no '07 636
@xeronicus15 жыл бұрын
Your man license is henceforth suspended, Please turn your balls in to the nearest man center. There is NEVER a such thing as to much power.
@lkrux15 жыл бұрын
thats lame.i mean good for a start but if ur gona have a motor that powerful..that thing should have 4 fat tires and 4whl drive if possible. make it a 2 seater more towards off road+more fun possiblilities
@jjpp2314 жыл бұрын
I dont get it why do wear a mask when you're welding..?
@normellow16 жыл бұрын
Can you please remove the music and put a little slip knot in . I think it will suet the creation of a demon kart! Thank you
@Xempt_One12 жыл бұрын
while this is true....you replied to the wrong person
@bjl3414 жыл бұрын
yeah your probally whright
@Hogasofa14 жыл бұрын
I don't think it is fair I have to wear glasses and I have never done something like this without wearing safety glasses but yet you have perfect eyes and then you go waste them because you go griding some medal without safety glasses.
@carlgar200714 жыл бұрын
OH, by the way, you wasted a good Kawasaki engine.
@normellow13 жыл бұрын
Fucking autocorrect !! " good fabricator " lol
@fredrik999z14 жыл бұрын
3:24 the gastank is reeeeally close to the sparks dude! So are your eyes and ears. Is it an electric wire on the floor? If the sheild melts you can get electrified. What are you building? An 600cc 120+ HP go cart?? Man, you are suicidal..