62 Impala SS Spring Swap

[@DA-cg3du]

it looks badass with the new springs👍

[@Boyzofsummer1]

Beautiful ride 🔥🔥🔥🔥

[@byler390]

I like the safety blocks

[@1KelvinMC]

Sweet car. Thanks for posting, I am swapping out my rear springs tomorrow on my 60 Impala. I am going to lose 3" from stock. I was told to loosen and re-tighten the carrier bearing at ride height.

[@bfimpala]

Thanks for the nice comment. Doing these videos are all new to me.

[@ratrod67]

Beautiful car! I'm new to the mechanical side of things and am not real sure exactly where to place Jack stands on the front or back. Could you do a short video on that?

[@shadarnott1334]

Good idea having the safety block there along with the jackstands, I do the same thing. I cringe every time I see someone under a car that's only on jackstands.

[@martingould1009]

I just purchased some REAR KING Springs from Australia , for my 60 Biscayne the box stated a 30mm drop, it dropped it only 5mm. the stock spring is 14mm the new slightly shorter spring is 18mm.

[@alexconan4028]

Kings springs for impalas are terrible i bought few difrent sets non of them sits in correct "bedding position and then setled for vk -vl but impala droped probably 5inch

[@roberturias3843]

Nice car what size tire are you using?

[@CTRLINDUSTRIES]

Post an update! Did the springs settle lower?

[@Boyzofsummer1]

I want to swap out my stock wheels and put a set like these on my 63 🔥🔥🔥🔥🔥

[@A1FORCEJUAN]

I 62 same color as yours and looking to do the same thing. I took a screen shot of your car before and after and I really see almost zero difference. Not enough to visibly notice….

[@CTRLINDUSTRIES]

Did the rear springs settle down some over time?

[@DanTheManIOM]

Love that color. What did you have to undo to lower the rear axle ? I am going to look at a 63 tomorrow but the rear springs are out of it...something has to hold it together...thanks

[@blakebiltwell5]

Nicely done! Are those 18 inch wheels?

[@bigjon.6258]

Shoulda showed all done to in stall..

[@ruminator2012]

I'm wondering the size of the 2x4 stand and where do you put it under the car

[@PeachCoastLowrider]

Nice cars ! I have a red 63. did the front shocks last night . doing back tonight .. do your poly front bushings squeak at all ? and is it hard to replace the balls joints and bushings yourself ?

[@bfimpala]

Adam no, totally quiet.

[@bfimpala]

Adam check out my previous video of replacing the ball joints, the biggest thing is being safe when you remove the springs. I did a video on removing them, but sorry, don’t remember which video it was. I this it was around 4 or 5. Let me know if you still have any questions. Sorry for the slow response, l had some family stuff come up.

[@betosoldies2145]

im doing my 64 rear end 2.5" lowering springs,can i use stock shocks?

[@ninja63639]

What's the overall length of the factory springs?

[@bfimpala]

Wow, this video was a long time ago, I’m not sure. Let me see where the stock springs are and I’ll let you know.

[@rickturntosender892]

Man brautiful

[@ez439]

I don't like it l freakin love it nice videos

[@alexconan4028]

Give it a 500miles and rear will drop @ setle in