Voiceover method is waaaay nicer to watch, biiig fan of the build. Can't wait to see it through.
@sovereign1263 жыл бұрын
First I've seen of you. Likely not the last though. Glad to have found you :)
@mathewthompson57093 жыл бұрын
I just stumbled across this video and would have to say it’s 1 of the best videos I’ve watched in a long time 👌🏻 will be watching the next episode
@79series2 жыл бұрын
Same with me
@christophergrauer98733 жыл бұрын
Nice work, keeping it real. Cant wait to see it on the dyno !!
@that_coiled_zook_ute3 жыл бұрын
This is the best episode thus far, you have really stepped up with the editing and voice over. I love the references to binky and skid factory! I'm loving the tools you make specifically to pull the injectors and the detail you go into with the injectors and crack testing, well done mate!
@ericjohnson6802 Жыл бұрын
Excellent commentary, you are a natural!
@laurenmau68953 жыл бұрын
Nice work. Doing the same in a 105. 👏🏼
@shanenorwell85803 жыл бұрын
I think I heard you swearing from here when you dropped that valve😂😂 Loving the build and vids mare.
@MaXimus6667893 жыл бұрын
Good stuff! +1 on voiceover style.
@brentmcd123 жыл бұрын
Excellent!! voiceovers stay focused!!
@leonex6062 жыл бұрын
sir you can't imagine how much I enjoyed your videos. I started watching and learned a lot about cummins engines I had 0 clues when I started watching your videos :). i really appreciate your in depth and camera angles and the voice over I swear it is amazing how much effort you have put in them. you have a new subscriber my man.
@OutAboutOffroad2 жыл бұрын
Thanks heaps mate! Glad you enjoyed it.
@ports7873 жыл бұрын
Keep the voice overs coming!
@danielwhite38983 жыл бұрын
What a great breakdown on the injectors mate, an awesome video!
@PlayDong2 жыл бұрын
These videos don’t get treat enough views than they deserve. Great video as always!
@MrButuz3 жыл бұрын
I'm not being funny but you just breezed through several, thousand buck jobs, like they were nothing. I'm gonna have to go back through and watch your vids I think as I've got some work to do on me patrol including injectors etc and I aint paying a thousand backs for every job!! Thanks!!!!
@OutAboutOffroad3 жыл бұрын
Heh, the wallet is aching bad just from the parts cost. To be honest if the engine was in better condition I'd have been happy to leave it stock but yeah... with the original Holset being ruined in transport, and not having confidence in the Cholset, and pretty much everything else on the engine needing replacement, it made sense to suck up the cost and just build it up now
@maheshsamarakoon0073 жыл бұрын
Nice work mate,waiting for next video
@sixstringedthing3 жыл бұрын
Great vid mate, learned me some stuff here. 👍 Nice save with the dropped valve. Bring on those ponies!
@ronincrabbapple38953 жыл бұрын
Great work mate. You look like you know what youre doing. What do you do for work.
@shadestuntin10192 жыл бұрын
bloody awsome bro, when my TD42 black top goes this is what i'll be wanting
@OutAboutOffroad2 жыл бұрын
Thanks mate!
@valve-do3jc2 жыл бұрын
Just found your channel. How many Cummins vids can I watch? A lot…Good job very clean work. I thought when dropped that valve we were gonna se a head stud video.
@OutAboutOffroad2 жыл бұрын
Cheers mate! Yeah I thought that too, haha
@jamesriordan43523 жыл бұрын
Awesome video mate, would love to know how you got the tacho hooked up in more detail. Cheers
@OutAboutOffroad3 жыл бұрын
Thanks buddy. Will cover the tacho and more of the electronics in the next ep
@dankelly853 жыл бұрын
Yes
@MrKombiman3 жыл бұрын
Quality content mate!
@brentmcd123 жыл бұрын
this gonna be lit
@mattcrick21563 жыл бұрын
Good stuff mate
@BentSpanner2 жыл бұрын
Great series mate. Where did you get your 12v from? On a side note of caution for the future, any thing done to the fuel system on first start up have some standing by to block off the intake in case of a runaway. I’m sure you did and I probably missed it.
@OutAboutOffroad2 жыл бұрын
thanks bud. from the states, out of a Dodge, through Texstar yeah had a few pieces of plywood kicking about I could have snatched up
@danieschoonwinkel3462 жыл бұрын
Dude youre a ninja
@alexarks5173 жыл бұрын
Awesome video mate
@VeggiePower3032 жыл бұрын
What is your MPG with the higher pop-off pressure?
@nicklazarevic25882 жыл бұрын
Gun 💯 💯 💯
@luisnunes7933 Жыл бұрын
Hello! A man dares because he must...
@Berawabilly2 жыл бұрын
man I wish i had your knowledge!
@OutAboutOffroad2 жыл бұрын
Thanks! but honestly it's just google-fu, taking a stab at something i've never done before, and hoping to f*ck I don't ruin $10k worth of engine 👍👍👌😅
@Berawabilly2 жыл бұрын
@@OutAboutOffroad haha come on mate don’t downplay it! What’s your trade?
@OutAboutOffroad2 жыл бұрын
@@Berawabilly legit, i work in IT. but thanks!
@dankelly853 жыл бұрын
Looking good
@midaslekwape21472 жыл бұрын
100% on the voiceovers
@ΙωάννηςΛαμπρογιώργος3 жыл бұрын
At 22:13 what kind of multigauge is this ?? How do you install as there is not an ecu in 6bt??
@OutAboutOffroad3 жыл бұрын
JRP 14-in-1. Doesn't require an ECU, it has its own sensors... I showed them in the video at 20:49!
@keilfestin46062 жыл бұрын
Hey mate how much did it all cost you to convert
@OutAboutOffroad2 жыл бұрын
hard to answer. I'm guessing about $40k but stay tuned i'll do a run down on cost soon.
@stevenwilliams71873 жыл бұрын
Keep the voice overs
@trickster86352 жыл бұрын
The mighty garbage truck engine! I give it 2 years and you'll tire of the noise, the 2500 rpm limit, the excessive fuel consumption and the endless cycle of coil springs sagging under constant 420kg of cast iron dinosaur motor.
@OutAboutOffroad2 жыл бұрын
So far I've done a few hundred ks and with the occasional silly full throttle pass I'm still only seeing about 11L/100km. 4k gov springs do their job. Noise is there but not awful, we'll see how it is after dynamat. Springs who knows but apparently everyone guessed the weight wrong as it's not massively heavier than the TB45e I pulled out