7/98 Dodge NV4500

[@Justins00ss]

So happy to see you back! Nothing but love and well wishes for Richard and Teresa

[@richardteresacricheducatio3542]

Excited to be back thank you for your support

[@Apolloneek]

Dude you have no idea how happy I am they are back. Thanks rich and Teresa ! Sorry you guys even had to stop but glad to see ya back

[@josephd.4890]

ive been cheching the old channel every few months hoping, this video popped up randomly and Happy Dance!!!

[@robertwriser7884]

@@richardteresacricheducatio3542where exactly are y’all located and how much does a rebuild like this go for. My 3rd gear grinds unless you double clutch or float it goin in and it is difficult to even get the truck into gear sometimes. As well as 4gear makes a scratching noice while getting up to speed.

[@cdpperformance2613]

@@richardteresacricheducatio3542 I have a 96 dodge ram 3500 with the same nv4500 2wd trans had it built with new main shaft about 25k ago shop but the wrong fluid in it! And I put about 100 miles on it before i caught it 3rd gear has always grind since.. what’s a good rebuild kit to go with ? I’m really wanting to pull and just build it at my shop..

[@michaelwallace3105]

Nice to see a manual transmission teardown for a change. Like to see more of that. Take care of that shoulder!

[@infinity3jif]

Woah, I thought I'd never see this guy again. I'm glad their channel found me. It was just sitting over there in my recommended section and I clicked so damn fast🤣🤣

[@richardteresacricheducatio3542]

We are excited that you found us too we are excited to be back thank you for your Support

[@zachgarris3773]

Big thank you to whoever got richard to come back and educate us. Listen close to him, his knowledge shaved 2 tenths of my ride. Thanks Richard

[@floydhenry2262]

great to see you guys back. U-Tube has been so boring without you guys. I wish you well in your new venturecan't wait to meet you in person.

[@DasLuftVolks]

Been missing you Richard!!! Thought the worst when videos stopped but glad to see all is well and drama free. Seems like kids these days gotta learn the hard way, hope he grows up before too long.

[@teamgrizzly2859]

What happened?

[@denchru6055]

@@teamgrizzly2859 Trent (Richard's son) started the old KZbin channel and Richard got greedy and wanted all the money for himself. So he fired Trent and now Richard has everything he wanted. His shop and KZbin

[@trojanyacht2518]

went to Roswell last month for a new great grand daughter, asked google maps for directions to Precision trans in Amarillo, said permanently closed, so disappointed I didnt get to meet you. Been a mechanic since 1970, still work at home on church friends cars since i retired, put i a bendpak 10k lift at home. Keep on keeping on and God bless you and wife. Praying for you and shoulders, i had rotator cuff surgery on both. Now can do most anything within reason Keep the faith Richard!

[@fourfortyroadrunner6701]

Richard I'm 74. Spent 3 months to the end of Nov last year converting my 01 2WD Cummins Ram to 4WD. Swap frame, tear down NV4500, and tore apart two transfer cases to swap shafts. Then rebuild the front axle. That NV was the hardest thing I've ever done. HEAVY.

[@markusedma]

This is fantastic to see a video! All us fans were so sad not to watch you in action. Much love you two!❤❤

[@edwardmyers1746]

Holy crap!!! Good morning Richie! Just woke up 5AM eating breakfast and saw this, what a treat! The big guy it back in town, god bless.

[@richardteresacricheducatio3542]

We are excited that you found Thank you for your support we are excited to be back

[@kenuber4014]

Well look who is back!! Good to see you guys again. I see the name has changed, but the same characters. Hope all is well.

[@billiebobthemechanic]

Seems like there was some drama between you and the kid there at the end of the last channel. Glad I found your new channel. You’ve helped me out more than a few times digging into some 4l80’s and 4l60’s. Very Knowledgeable.

[@allenbrown7820]

Glad to see you putting videos back up. Missed watching you spread your wealth of knowledge. Best of luck to Teresa and you on the new venture! Be Safe!

[@diverducker2984]

Been watching your old channel and hoping you would come back I checked every month or two I never knew you made a new one glad you’re back.

[@truthboomertruthbomber5125]

Teresa, I am truly impressed that you could identify the cage of the pilot bearing!! You are awesome!

[@richardteresacricheducatio3542]

Smart woman right there she’s a keeper R

[@shack_67]

Nice to see you back Richard

[@franksprecisionguesswork501]

Welcome back! Welcome back! Welcome back! I’m very glad to see you here!

[@richardteresacricheducatio3542]

Thank you very much we’re excited to be back thank you for your support

[@mjh123crh]

Awesome to see you 2 beautiful people back at the videos... I loved watching and learning from you...

[@koldphuzhun]

I just found this channel after missing the Precision Transmission channel. So excited to see videos coming again! Good to see the two of you back again! You were missed until now.

[@jamesg6792]

Welcome back. You are the undisputed King of transmissions!

[@donaldsingleton2161]

Great to see you an Ms. T back. These videos you do help refresh a old man's mine .😊 God Bless you two.

[@dgmcke3074]

I learn something with every video-so glad ur back

[@damanifesto]

Dang I've got a 1997 GMC K3500, 5 speed 7.4L with a fifth gear whine. 109,000 miles. Thanks for doing this video.

[@joelrugg]

Real happy to see you all again I’m rebuilding my first 4l60e thanks to you all❤❤

[@hayzersolar]

awesome new videos great to have you back

[@lamontwells8494]

Miss you guys . I glad the new channel found me. We need you Teresa and richard

[@anthonyeastham7960]

It sure is good to see you guys on here again! You all provide more and better info than any other channel. Wishing you all the best.

[@cuttnhorse2013]

I’m so glad to see you all. I must have missed what happened to you all? Ronnie, East Tennessee

[@carltonlane8931]

Brilliant we missed you both.

[@camneilsen8234]

Thanks for coming back 👍🏻

[@TeemarkConvair]

great to see you back; this brought back memories of 1972 when i was young n foolish and dove into a Muncie 4 with a Motor Manual and a carton of Chevy parts and with the help of wifes oven and the freezer and a block of 2x4 rebuilt it,, dang input shaft needle bearing had me swearing!! but, thats how ya learn,,😆 cool to see that monster bucket of steel, had to be a chore with you shoulder..

[@heatherfawkes4759]

Welcome back missed your great videos.

[@jandsmarineservicejimfromd4994]

Very happy to see you guys again! Missed watching your videos

[@mikepickett3277]

This has made my day. So happy you and Theresa are back. Boy I can’t wait..

[@davidnightingale2260]

It’s fantastic to see you back, I really love watching your videos and have learned a lot from you. You have a wealth of experience and knowledge that not many people are willing to share. I hope this is the start of more good things to come.

[@s0lidgoat199]

I’m so upset it’s takin me this long to find y’all again, glad to see you back you have no idea

[@MrRee-kn4xd]

Oh my goodness I'm so happy this popped up in my recommended videos! It's so great to see you back!

[@davidmashburn6890]

I’m glad to see back Richard I’ve missed your videos so much

[@ODGColornChrome]

Glad you're back Richard. Sorry about wharever happened in your fam.

[@haroldhawkins9370]

Glad that you're back to doing videos, miss you're experience on the transmissions.

[@ozzyfranf]

Glad to see you're back!!!

[@chipper442]

Happy to see you walk in with the gloves on, those used oils and chemicals wreak havoc on the nervous system. Thanks for another great tutorial. You’d make a great shop teacher.

[@adamcarpenter5190]

First time viewer! The shim rings between the 5th gear and bearing at 11:17 are to properly space the bearing so the gears have the right amount of play/tolerance in the trans :)

[@kenmurray4232]

Just found you again tonight. Glad to see you back Richard. I have learned a lot from you & look forward to learning more, even at 68 yrs old. Nice to hear your voice Theresa & to see Annie.

[@Mnt2ride]

Good heavens I was wondering where you went! Good to see your back

[@pbee73]

Wow, glad you are back Richard and was always wanting to see you do a vid with a manual transmission.

[@Chris-ey6rn]

So happy to see you are back . Being a truck driver for a living you have helped me pass a lot of down time waiting . I hope all is good with the family ❤

[@carltonlane8931]

Great to see the both of you,hope your new channel,work shop works out,I’m over the pond,but your videos are so informative,and this time try not to splash the wife,we all wish you all the very best.

[@michaelwells8559]

Love your videos. I watch them over and over. Did the same repairs to mine, lost 5th gear. You call those parts dogs, I usually call them keys.

[@robertlawson4742]

Great to see you guys back. Love your videos

[@richardteresacricheducatio3542]

Thank you for your support we are excited to be back

[@davidlittle9010]

I’m so happy to see you guys! Welcome back.

[@roarkfabworks]

Love learning new things from you Richard. Very happy to see your videos again. Keep up the great work.

[@gdeisinger5658]

Took me forever too track you down! Glad I found your new channel and your doing good. I really enjoy watching your Videos.

[@gillboardman8998]

So good to have Richard and Teresa back! Made my week🤙 This is Gill from Washington, you rebuilt my big, blue Roadmaster Wagon 4L60E last year and I gave you the Steve Morris "The Wagon" shirt. Let's see it!😁👍 Any chance you can upload the rebuild vid of my tranny? Still running fantastic. Definitely SUBSCRIBED!

[@williamgreen2364]

Thank yall both for your efforts in educating anyone willing to learn about these great trucks and transmissions. Some of us have no choice but to work on our own vehicles especially in this economy. It really helps to have solid information

[@repairitdontreplaceit]

yay , welcome back guys . we have missed you so mutch

[@bill8by5]

Richard & Teresa, so very happy to see you folks back on here. Have been missing That voice talking about Transmissions!!!! Much Love and respect from Galveston!!!

[@brjr2009]

Welcome back!! I missed you all so much! Thank you!

[@richardteresacricheducatio3542]

Thank you for your support we are excited to be back

[@redruuum75]

Welcome back! We've all been waiting. Instant subscribe.

[@richardteresacricheducatio3542]

We are excited that you found us we are excited to be back

[@erik149]

Great to see you back, missed you guys.

[@richwielechowski5191]

Great to see you back posting videos! Good luck in the future!

[@jmstew642]

Good to see you folks back. Love your content..!

[@davidknowles2024]

nice to see you back i miss you hope you are well

[@keithreilly386]

I learn something every time I watch a video from you . Glad you are doing these you are the best

[@richardteresacricheducatio3542]

Thank you for your support

[@dgmcke3074]

Wow! Wizard at Manuel transmissions too!!

[@Spookieham]

Fantastic !!! Richard is back !!!!

[@fourfortyroadrunner6701]

NICE to see you guys BACK!!!

[@robertmedina6875]

New sub here. Worked on cars for more than 25years. This old Dogg wants to learn new tricks lol. AWESOME VIDEO!!! Thank you!!!

[@richardteresacricheducatio3542]

We’re excited that you found us we’re excited to be back

[@paulblais8481]

So glad your back, Missed your videos. Can you do one on the A4LD Transmission.

[@tommitchell7087]

Scrolling when I found your video, really missed you guys! Great to see you posting content!!

[@rubicc]

Glad to have found you again! Welcome back!!!

[@kmack747]

So glad to see the master back i have been going through withdrawal from your excellent transmission videos

[@dalleymonroe3836]

It’s nice to see you back. I’ve been waiting for a dodge nv4500 to come through your shop because I got one that’s stuck in fourth gear. I’ve wanted to see what I was into before I got into it from what you was saying it looks like I’ll be sending mine out to get fixed.

[@darrylmonat5361]

Glad I found you again! Loved your previous channel, but things change. I see new shop? You moved? Gotta lookup previous video's to catch up.

[@johnsullivan3623]

Great to see you back....love it...hope all it well

[@gbowne1]

Really glad to see you back. Best wishes for you both Richard & Teresa :) Always enjoyed your videos.

[@kgindustries2937]

Great to see you back on YT. I was starting to forget how transmissions work.

[@hugieflhr03]

Always great information and tips from the professional!!!

[@petenikolic5244]

Hi Richard nice to see you got your channel missed some of it had a few major medical issues hope your well

[@thecookmeister]

Welcome back. Missed you!

[@Hjfvvdst]

Great to have y'all back! Man that Trans looks like it has been worked real hard.

[@nickcucchiara]

It's good to see you again as it's been a while! Just found this channel and happy to subscribe as you do excellent work!

[@Blacksheep99-g5x]

Glad to see you guys again always loved the videos on the other channel you guys are great

[@MichaelLawrence-ow3so]

I'm so glad to see you guys are back

[@richardteresacricheducatio3542]

Thank you for your support

[@thomaspaine5091]

just found this video, missed seeing your work, and knowledge great success.

[@richardteresacricheducatio3542]

Thank you for your support

[@stewart4711]

hey thank you for doing vids again i like to see and learn stuff

[@ericfaley9019]

I’ve did lots of those 5th gear nuts and gears under warranty at the Dodge dealership . The local transmission shops in the area used to weld the nut to the shaft. Bad idea if you had to service the internal parts. Good to see you back online.

[@dansmith-kd8wz]

Welcome back dude…happy to see you again. Plz keep the vids coming.

[@jeremyking5684]

You sure are a master! I've had 2 left shoulder surgeries and 1 right shoulder surgery, my left is still bad so I know what your talking about with shoulder problems. I've had both hands operated on and both elbows operated on.

[@Whisper555]

I'm glad to see you and Teresa back Richard. I was wondering why "Precision Transmission" just suddenly stopped showing up. Guess you are here now. Hope you are keeping well? All my best to you all.

[@chetbaker6432]

So glad to see you and Teresa back!! Best wishes!

[@Thundarr995]

Yeah, I never thought drive shaft yokes really wore out. I did a NP 242 transfer case swap on my 96 5.2L ZJ about a year ago. It's 97 XJ 242 with the external output shaft. I had the driveshaft shortened, and I used a wrecking yard yoke. After about 6 months, I started getting a slight vibration. The U joints were fine, so I took it back down to the shop to see if the shaft was slightly bent or possibly out of balance? Nope, the splines were just worn. They didn't look worn to me, but I bought a new yoke, and they even installed the new yoke on the driveshaft for me for free. I had my doubts that was the problem, but it was. Vibration went away & it's all good again.

[@jonlamkin6108]

I'm so glad to see your back!!!! I hope that in the future we can do buss together!!

[@fourfortyroadrunner6701]

Wish you would show the puller setup on the 3-4 synchro hub. The Dodge book shows nothing. I purpously ended up possibly warping the hub removing it rather than endanger 3rd gear. It was TIGHT!! I have a 04 GMC and manual, the book has NOTHING on the teardown of a 4500!!! On mine, none of the Timken bearings were "finger pull." I was lucky to find 2X of the jaws of the special pullers on ebay cheap, and built the rest

[@edgardocuevas6164]

Nice i was wondering why you weren't uploading great to have you back giving us great content

[@arch953]

Great to see you back!!

[@mw6886]

Yay! Glad you're back and I found you!

[@xboxbml]

You’re back!!!! WOW!!! Good to see you again!!

[@thebusycrab4887]

Good to see you back, Love from India 💗💗

[@gszytk2571]

So happy your back!