7 Causes when Bleeding Brakes and No Fluid is Coming Out

[@mehdirezaie7182]

2007 Toyota Corolla. No ABS. I recently replaced all brake lines, hoses, calipers (front), and wheel cylinders (back). I let the system gravity bleed but could not get any fluid from the right rear bleeding valve. Could it be that the proportioning valve is partially blocking the fluid going to the right rear wheel? took the car to a repair shop but they were unable to resolve the issue either, and charged me $150 for labor. They told me to replace the proportioning valve.

[@josequiroz4605]

I jave to release almost the entire bleeder bolt in order for it to release ant fluid. while the other caliper as soon as I loosen it fluid comes out.

[@user-zs8rz8go5u]

Have a 99 Silverado 2500 4x4 broke the bake breakline. Repaired it. Have fluid going to back breaks but mastercylinder is not releasing fluid to the front lines.

[@davedeatherage4902]

Very good, thanks!

[@isshinryu11]

Quick. Thanks. Have 2003 honda element. Front brakes locked up. Switched new caliper driver side, no fluid coming out banjo joint. Putting new hose on today. This was the hot wheel. Hopefully passenger side will be ok.

[@buddygreen4119]

..00.0.......

[@HenryRandolph-l1v]

Fluid is going to the front drum but no fluid to the back wheels

[@cameronskaggs4188]

Number six number seven I think those are good idea. Maybe it was number five that brand new brakes brand new master cylinder brand new power booster brand new proportion down. I still have no brakes in the back. I’m working on it for a month and a half, and I still don’t know why.

[@mehdirezaie7182]

Hi! Were you able to figure out? I recently replaced new all brake lines and hoses and calipers and wheel cylinders (drum brakes in the back) . I also dont get any fluid in the back.

[@mattcook1080]

I just replaced my brake caliber and when I unscrewed the bleeder nothing came out then I unscrew the brake line from the caliber and some came out but not a lot

[@elisanford3245]

What’d you figure out

[@chrisandalice8101]

Any updates?

[@kevinmoua875]

I got toyata highlander hybrid 2006 one the brakes doesn't work I try to breed but only drop fluid little out only

[@Sonny1989]

I need your help my 2019 was in an accident so I’m guess they replaced the brake booster. It was hard to push pedal and I had light on so I tried to bleed lines! Nothing. Nothing will come out idk what to do

[@joerusso3424]

Ok I have a weird one brand new calipers all around. When bleeding I’m good until I get to the front Rt I get no fluid from the bleeder valve however if I take the hose off the caliper there is fluid pouring out of the caliper itself so it’s getting fluid to it and I have good fluid pressure from the left front. Can’t figure out how there is fluid to the caliper and nothing out the bleeder. Thoughts?

[@HVAC_Mechanic]

There likely is a blockage or issue in the caliper

[@Kalicdire]

Iv got fluid coming out and the pedal sinks as I bleed it at right front and right rear calipers like it normally should. but when I try to bleed right rear or left front I get very slow fluid flow and no air bubbles. I had to activate abs motor with a scan tool to get the 2 that are working correctly to bleed. Because 2 calipers are working correctly then I feel the master cylinder is good. Is there a process to bleed the brakes at the abs module?

[@brettpeeloff2120]

Scan tool to bleed the abs system, hopefully mine comes in mail tomarrow

[@Kalicdire]

@@brettpeeloff2120 yea I got one, and it worked, my problem ended up being a defective brake booster