7 of 11 - DIY Road Case Assembly - ReliableHardware.com

www.reliablehardware.com/ Reliable Hardware presents a close-up look and tips on Road Case assembly.
Parts and Tools www.reliablehardware.com/diyro...

[@reliabledan]

Washers are generally used on components that will be under stress during use - for example handles and latches. Washers are not usually used on double angle extrusions as the inside leg serves as reinforcement. However some people use washers with every pop-rivet as a habit. Thanks for your question.

[@galacticshaman1]

Great series of videos- thanks

[@reliabledan]

We certainly do. Add items to your cart and proceed to check out. You'll see options for international shipping options. Hope this helps -

[@reliabledan]

Example: Using 3/8 plywood and our ABS Laminate you would use 3/8" double angle. Both Double Angle and Tongue & Groove extrusions are designed the same way.

[@reliabledan]

Yes FriedRiceGalore - ratchet strap and band clamp are synonymous terms. Search for either at Lowe's or Home Depot and you'll find one. Hope this helps.

[@TheCobru]

Thank you for your viedos! I'm interested in making a DIY flightcase for my guitar pedalboard, and may be, I'll buy from you this summer. It will be like 2 or 3 times cheaper than at my local store in Russia!

[@reliabledan]

You'll notice at 1:52 into the video the holes go through the inside leg of the extrusion. This precludes the need for a back-up washer - the aluminum itself serves that purpose. The cases in the video were in fact built for one of AFW's customers.

[@vanediaz10]

Un genio!!!!! 👏👏👏👏

[@reliabledan]

3/8" rivets as well for 3/8" construction.

[@IBDrum]

I found that when I placed my laminated pieces into the double angle I had to really jimmy with it to make sure the double angle didn't catch the laminate and start to split it or tear it away from the wood. It did not seem to go in as easily as is demonstrated here.

[@honeybeekorea1553]

Watch the case video well

[@estinguray]

How much length to the board do the extruded aluminum angles add? In other words, if I want a box 12" wide, how long should I cut the board?

[@michaelhamerin3814]

Nice job. U need dog bench pins to brace your panels against when hammering your extrusions on.

[@FriedRiceGalore]

I'm assuming ratchet straps would work as well as a band clamp..?

[@victorhuayta4361]

please could upload a video of how to make guitar case with the same materials please thank you . here in my country there are no videos about that i amfrom Bolivia

[@delfinorodriguez1576]

very good tank you very much for You work

[@ParkwayFAN1995]

So I would also use 3/8" rivets? I noticed you used 1/8" rivets but the wood looks thicker than that.

[@ParkwayFAN1995]

How thick is the laminate? Would I need to buy 1/2" double angle excrusions and use thinner, 3/8" plywood to make room for the laminate too?***

[@Mralford]

hey do you guys deliver to australia?

[@Psychlist1972]

I see you gave up on using washers during the rest of the assembly here. Are they still a good idea?

ola me conte onde consigo comprar esse perfil esse acabamento no brasil não encontrei

[@meirdeaph]

dan the man!!

[@honeybeekorea1553]

안녕하세요 케이스제작 잘보고 갑니다

[@mattekudasai8249]

6:26 looks like he got caught off guard lmao

[@FullBlownRedneck]

You forgot to put the washers on the rivets for the top. I noticed that the majority of the rivets on the body were missing the washers also. Was this a mistake or did you skip that step since you built this case for demonstration purposes only?

[@Lakk6Metal]

:) Hi and thank You very many again for great tutorial videoes :) I have a question about Coffin cases, can You please please make a tutorial on that ? Im gonna put chrome trim and all on it :) Kevin , Norway, Scandinavia

[@reliabledan]

Thanks for the suggestion.

[@luischuquiano9435]

Como se llama el perfil para unir las tablas o donde compro xfa gracias

[@apixelintime]

This one time, at band clamp...

[@mariaisabelvillamizar476]

Bueno y donde consigo en Colombia los materiales metalicos es decir las lineas de aluminio , le agradezco

[@reliabledan]

Usted puede comprar estos artículos en nuestro sitio web y seleccione envío internacional

[@84racso]

Cuanto aluminio acupo para aser la case

[@duvervs5928]

y los esquineros ???

[@jefffezz5459]

What brand of strap wrench (band clamp) is that?

[@reliabledan]

I think it was Stanley. Got it at Lowe's.

[@kipwilson3771]

Of the thicknesses of plywood you use for cases, what thickness do you find yourself using the most?

[@KidFromWinnetka]

3/8" plywood is the most common.

[@gurayozen7243]

bunların üzerine takılan malzemeleri nereden alacağız bilen varmı kilit kulp köşebent kenar profilleri nerede bulunur fiyatları nedir Türkiye içerisinde nereden alabilirim bilen varsa yazsın lütfen

[@hulksta3223]

what rivet gun brand are you using?? I can't tell in the video.

[@reliabledan]

Hi Mark. For our DIY Road Case videos we used a cheapo Harbor Freight gun. It almost lasted through the video & then took a dump. We then evaluated various guns and settled on the one we now offer on-line at ReliableHardware . com. Go to our site and search "rivet gun" or click the link below - it'll pop right up! Thanks for asking. www.reliablehardware.com/pneumaticrivettool.aspx

[@hulksta3223]

thank you for the heads up. I plan on building a few pretty soon. I like how everything was broken down into it's simplest form. Makes it less confusing even for beginners.

[@nelsonrodriguez7140]

hola, alguien me podria decir qué nombre recibe la herramients que utiliza el señor para atar el cubo en el minuto 4 con 22 segundos?

[@reliabledan]

www.amazon.com.mx/s?k=band+clamp&__mk_es_MX=%C3%85M%C3%85%C5%BD%C3%95%C3%91&ref=nb_sb_noss_1

[@TempoDrift1480]

No makeup gain on the compressor?

[@reliabledan]

Thanks for watching.

[@CarlyWaarly]

Why not use washers on the lid with the rivets?

[@reliabledan]

+CSMedia The aluminum extrusion provides the support on both the front and back of the rivet.

[@CarlyWaarly]

Thanks, very interesting and helpful videos.

[@jessecoonen7881]

What’s the side dimensions for the lid? 3 inches? Four inches?

[@reliabledan]

Generally between 3.5 to 4.

[@rdmortal]

where are your safety glasses???

[@mexicoburito256]

CAN ANYONE HELP ME !! .... I just wanted to know is this a safe website ?

[@meirdeaph]

you make one hellova sexy box! i need something for lotsa tattoo gear,more than just a few machines

[@Penfold8]

He's wearing them. Their called real glasses :-}

[@pauldeveau9716]

there the right way and the wrong way good luck

[@wayd19]

give the guy a break, hes only done this once or twice. plus he doesnt have a lot of hand tool and power tool experience. he did good.

[@pauldeveau9716]

learn to staple double angle and put the box in square make a jig you got to be kidding on this video ive been doing this so long you got to be kiddeng me