7 Valuable Tips For A Better Accent Wall (Reclaimed Wood)

[@Think-dont-believe]

2:36 lay WHOLE thing out. Yes I will great suggestion! And pictures WOW!!

[@Wolfie66]

I want to do a feature wall in my den. I have to get rid of a closet door, drywall and paint. My question is - can I use liquid nail to fasten the 3/8 barnwood to a plaster wall? The surface area is approximately 8 foot by 9 foot. Thank you and great video!

[@desmondhayward9257]

Great! Thanks for this - very helpful. 🙏👍

[@carolynkimbrey1423]

Brilliant video - thanks - so clear and obviously a pro builder!

[@340MAGNUM8]

Heck yeah, some who doesnt show the tools you need and then play music. good job.

[@cheyenne3380]

Very useful tips! Thank you!

[@westheurer1722]

Great video. Thanks. Do you just use Brad nails or also liquid nails?

[@TheDenBarnwood]

Construction adhesive and Brad nails. Might be over kill but we have never had anyone complain.

[@jeremyaguilar3805]

How do you get your hands on wood to repurpose? I'm looking to do a similar project for an interior wall but I'd rather get my hands on old wood vs planks from home depot

[@loribain8183]

Hi, I am a 60 year old woman, my husband (60 also) and I are taking down a barn this summer. I have 112 question. Is there any way you could answer a few of them. Thanks 🙏 Lori

[@TheDenBarnwood]

www.thedenbarnwood.com/ Connect with me here.

[@cheyenne3380]

Which is the best way to install: from top to bottom or from bottom to top? If one person working on it, I feel bottom to top is easier since the bottom aboard can hold the top one while I level and nail it. Am I right? Thank you for your ❤️

[@TheDenBarnwood]

This link will answer your question. In short, we recommend doing exactly the opposite of what you mentioned above. There is no right or wrong but I explain better in the video. How To Install Our RECLAIMED WOOD FEATURE WALL - DIY

[@trinityestrada9588]

I have sheet rock, how could I attach my wood?

[@TheDenBarnwood]

Brad nails and construction adhesive 😊

[@htown860]

Instead of tricky cuts around trim... Oscillating tool to cut back the trim and run wood behind it would be quicker, easier and likely look more seamless.

[@TheDenBarnwood]

Great idea, thanks for sharing!

[@curlycindy]

Don't understand what you mean.... Cut back trim and run wood behind it??? Trying to picture that but drawing a? Still

[@HK-ox8zs]

Do you clean the wood first? What about mold and bug issues?

[@TheDenBarnwood]

Yes, we clean up the 100 yrs of dirt after milling each wall plank. Result: naturally and beautifully weathered yet clean and square. Bugs treatment: lots of options - chemical disinfect, simple water Borax mix, kiln dry, and or chance it with thin planks. To each there own.

[@josharrowood6706]

Did you plane or sand the boards before putting them up?

[@TheDenBarnwood]

We have another feature wall tip video in the works and it will cover wood prep and more.

[@DeanRamser]

Should I cut the old reclaimed barn boards on a table-saw to remove the sides (tongue n grove) ?

[@TheDenBarnwood]

Welcome to The Den Dean, sounds like a great project in the works! It depends on your desired outcome. Either or, there is no right or wrong answer. If you do use a table saw keep the pieces short (5’ or less). This will help ensure straight lined cuts and your wall will fit together nice and tight.

[@DeanRamser]

@@TheDenBarnwood Thank you! The boards are uneven, full of character. I was afraid of the imperfections dominating the "rustic" look. Thanks!

[@DeanRamser]

@@TheDenBarnwood we want to preserve the drawings on the wall before the shiplap goes on. Can we cover the wall with thin plastic?

[@TheDenBarnwood]

@@DeanRamser one option is to seal the wood with a Varathane for protection. This video will answer your questions: How & When To Seal Reclaimed Barnwood Feature Walls Fast

[@kenziecashflow]

When do you stain your wood? Before or after install

[@TheDenBarnwood]

We stain the fresh cut edges of the trim prior to installation. It’s easier this way with less mess. Thanks for watching!

[@pearlperlitavenegas2023]

Thx

[@chadsmith8353]

How would you go about attaching the wood to the wall if you didn't want to make it permanent. My idea is to glue the boards together and prop the whole thing up and just secure the corners. I'm open to alternative methods anyone thinks of.

[@TheDenBarnwood]

Just an idea but we have made a temporary wall out of 2x2 and fastened that to the existing wall sparingly. Then attached the beautiful barnwood to it!

[@chadsmith8353]

@@TheDenBarnwood wow! A reply in less than an hour from a 2 year old video. Earned a sub from me :)

[@thomasgregory8760]

What should I do about switch plates?

[@TheDenBarnwood]

So many options, it depends what your desired results are on how you finish out the receptacles. Some ideas for you are in this video below. Trim section… How To Install Our RECLAIMED WOOD FEATURE WALL - DIY kzbin.info/www/bejne/jH-9nWmEZsSopck

[@eliaschergui7093]

What psi did you set your air compressor to?

[@TheDenBarnwood]

The PSI will depend on the type of wood used. Test out a range on scrap from 60-100 PSI. The idea is to sink the nail head enough that it makes it less visible. Good luck on your project!

[@abbii1661]

first 2 mins are all rubbish. have to leave