Super Easy Wood Accent Wall Idea (DYI Wood Plank Wall)

[@julessanchez9216]

What a great job that y’all did, came out beautiful. I like the LSU cap, reminds me of home !

[@kimblebreazell556]

I love when I see an older woman with a younger man. You too work well together. Great job cougar!

[@KarenHighland]

This accent wall turned out amazing! I think offices and powder rooms are the perfect rooms to update like this...they're small, so they're easy and inexpensive, but they add so much impact. And then they're easy to change if you want something different.

[@ArturoGarcia-er1hk]

Karen Highland I also have a powder room. My son dropped flour all over also baby powder so yea a powder room

[@JudiChristopher]

Woman... You are brave!!! Painting on carpet without plastic under the wood... Great job!!!

[@martymcfly5842]

You have the exact same nail gun I do. Worth every penny.

[@fukakes]

Hey, would you mind sharing what nail gun it is? I’m looking for a cordless one. Thanks!

[@ecalderon928]

Love the colors of your planks.

[@Ravennatorr07]

This couple is awesome wtf they have such a great partnership/relationship plus the wall looks amazing

[@stanleywalker5817]

Did y’all have to move outlet out a little or how did it come out flush ? Tks and it looks amazing

[@KristinaSmallhorn]

Yes, We got a deeper box and pulled the wire to be flush with the planks. Thanks for your question.

[@ConstructionKronies]

Great Idea Starting from the top down. If you didn't frame the wall you never know if it is square. If you have lasers kicking around you can check that and also level your first row. The walls looks great guys, you two are too funny.

[@PaulPeck]

All and all, I think the project turned out great!👍🏻😂

[@Trd2020]

Great video

[@KristinaSmallhorn]

Corona light thanks!!

[@ulookgood594]

Thank you taking my call earlier and answering my questions. I cannot wait to see you guys built the shoe shelves. I need to do the same thing for my wife.

[@ulookgood594]

By the way I went an purchased a battery power Dewalt Brad nail gun. I am going to take on putting up the wood panels this weekend. Wish me luck. @@KristinaSmallhorn

[@ulookgood594]

Can you help me with the KZbin live feed?

[@ulookgood594]

@@KristinaSmallhorn yes

[@ulookgood594]

@@KristinaSmallhorn cell phone

[@ulookgood594]

Send me your email so I can show you the finish look . I finish the accent wall and ceiling.

[@swampace30]

Nice! Didn't think about using fence planks. Go Tigers!

[@skeeburton3360]

Great Great job luv ut

[@georgiacoasthomes]

It looks so good!

[@georgiacoasthomes]

@@KristinaSmallhorn We actually did that on our headboard a few years ago. We bought new boards, banged them all up with hammers and torched them, stained and painted them to make them look distressed, and then made a headboard that looked like a barn door. It was really cool! All the boards were the same color though. I would totally do this on my wall!

[@georgiacoasthomes]

@@KristinaSmallhorn Right now buyers would love it. Three years from now? Eh, maybe not so much. Will it damage the wall a lot to remove since you used glue?

[@Mikebtracks]

Great video, I’m going to do a couple of walls in my studio

[@ToolReviewZone]

Looks awesome guys. You should come and do this to my back basement wall... you know, just for practice 😏

[@ToolReviewZone]

@@KristinaSmallhorn haha, tell him I am used to fires with all those dewalt tools I use

[@eddiesmallhorn4021]

Tool Review Zone only one has smoked....

[@dennisandrews8485]

You both did a great job and I loved how it came out. One thing though, the square you used, is called a framing square. The small square is called a speed square.

[@dmuseing6392]

It says 12 gauge nails in your description. Ryobi finish nailer's only come in 18 gauge and 16 gauge. Which model do you have and what was the length of the nails you used? 2 inch? 2 1/2 inch? Thanks

[@sarahkrick8667]

Can we get a father away view! Love this content! More more!

[@pauliewalnuts2878]

Looks great guys. Nice job!

[@pauliewalnuts2878]

@@KristinaSmallhorn Sure

[@iamjoeledbetter]

Very helpful!! Thanks!

[@ModernDayTech]

Such a fun project! Very cool that you torched it and painted them all differently. Great job!!

[@kimberley4758]

Beautiful!

[@andrewh21]

That looks great! I am excited to see it on trivia night !

[@ozzstars_cars]

A husband and wife team that don't fight or argue during a home improvement project means they aren't really married. lol Nice idea and good to see Eddie breaking a sweat with all that work!

[@davewelike]

very nice! happy new year!

[@iwanpriady3937]

I Am doing three years ago, wall pallet sweet dream bed room

[@dantheman9395]

All in all in looks awesome! We have some friends that used flooring as a wall covering.

[@mr.z8720]

you are so happy couple !!!

[@hicksa1]

Absolutely beautiful!

[@trinityacreshomestead4147]

That looks awesome 👏 👏

[@aaronallen5274]

Eddie small horn 😂

[@ameliatribeofissachar7311]

Totally love this!!! I'm making mine out of pallets since I'm so poor lol. Hey, a lady has to do what a lady has to do. Blessings to you 😁

[@Samlefe_]

You guys look like such a cute and happy couple! Great job on the wall too

[@yvangelist]

oh Man. I like you two. Working on project together and having fun and laughing.... :-). We did our accent wall in the bedroom similar to this and turned out as a funny cool rewarding couple project.

[@youcantoo247]

Cheers from Gulfport, MS!

[@rhemsing3857]

great video, would love to know more about the nail gun and nails used

[@gbornhardtful]

Little trick to help hide the space between boards. Paint the wall black before hanging wood.

[@hushhh2474]

Love this look. Thank you for sharing this.

[@amyhayslettrealtor1901]

I like that circular saw. DeWalt.

[@mikeroten6894]

Great video you guys! Wow it turned out great 👍.

[@jasonclark1153]

Nice video. I like your results. In terms of filling the holes from the pictures taken off the walls... I understand, it's seems counter intuitive (Since they will be covered anyway). But you know what they say: If there's a hole, something's going in it!

[@TheNottonight]

I did the same thing but with pallets in my bathroom behind the vanity I did it vertical with 6 different colors and I Left the nail heads in.

[@alcolavista-22]

It’s awesome 😎

[@xoxCynnaminkissesxox]

Love this idea.

[@KristinaSmallhorn]

xoxCynnaminkissesxox thank you.

[@mjc8761]

Looks good! Great idea 💡 thanks for sharing

[@hornconstruction1393]

love it nice job guys

[@faceinthewindow]

What a great idea and look! You guys are fun and informative at the same time, thanks for the info!!

[@sktyby]

I'm with Eddy. I wouldn't be able to sleep at night knowing those holes were behind the boards.

[@billybike57]

Loved the video, will be putting into place my own wall this fall. Just one thing, sometimes folks watching videos here are not savvy on the tools, as an example, you referred to your "framing square" as a "speed square". Outside of that great job!

[@angelalogan6471]

Qqqqpqc

[@karlschuhknecht3434]

Awesome video. I just gasped when I saw the small clip of slapping some paint on a plank, while it was on the carpet 😱 I’m sure it’s old carpet

[@hackiest]

great tips Kristina

[@CheatcodeGlitch]

Cool video, although you skipped over the part I wanted to see most (the outlet)

[@sherikemp8702]

We are going todo this, but my husband wants to remove the molding at the bottom. I say leave it or it will look weird. What should we do?

[@RobMotive]

Looks great👍. I love projects like this!

[@bgregg55]

I assume u used electrical box extensions. that part was skipped over. looks great. new subscriber.

[@dougiequick1]

I wonder what the effect would be if you took a small roller and carefully rolled the side edges in black? So there would be this faint black line between each joint?

[@hendraiskandar]

wonderful. May I know what size is the nail gun ?

[@Oweee]

What you could do, before mounting the planks on the wall , even before painting them - is to level them evenly to each other. That would cause the finall effect to be eaven greater looking.

[@blanken1]

so how do you solve the problem of the narrowing door trim? Wall looks great and the flame to pull out the grain is a great idea!

[@lindavarley6791]

Nice teamwork :). Beautiful project. I hope you love it and are happy. We are shopping for a nail gun. Recommend one? We hired a plumber recently to replace and relocate the old hot water tank (moved into the garage). Now we have a closet in the utility room we are going to rebuild into a pantry! Prime real estate (pantry space!). I’m so excited.

[@lindavarley6791]

Ok. Thank you.

[@justindavis5983]

wow that's really beautiful! it's nice to have a accent wall to break up all the bland painted walls in a home.

[@raiders3417]

How did you cut around the receptacle did you pull out the box ?

[@waynebrady1956]

So how did y’all end up making the wall outlet flush with the wood?

[@jonathanfairchild26]

How did you work around the outlets? Any cutting involved once you got to that point?

[@KristinaSmallhorn]

Jonathan Fairchild we cut around the plug and pulled the plug mount forward and screwed it into the boards. (That was my idea, Eddie wanted to keep it mounted to the original wall 🤦🏻‍♀️)

[@louteix9981]

Hello great job, doing the same in my living room in three different places, got everything that I need it, only my stud finder is a piece of, you know, so does yours works fine, if so could you forward information of brand and where could I get one please, thankfully

[@daniellemacdonald3142]

Love ❤️❤️❤️

[@puppetpatti]

That looks amazing Kristina! Love seeing it evolve. lol Go ahead Eddie "All in all, I think the........" 😊 Great video you two!

[@internal_dialogue9290]

Just curious ...looks like treated lumber and that will eventually dry out and shrink. not sure if id use it and put a space between them have you had any issues?

[@ConstructionKronies]

Great Video I love seeing Eddie with the Flame Thrower! I don't know the hashtag because I missed this Thursdays Trivia because I was painting away and had the computers all torn apart.

[@Brandon-yp2wy]

That's such a cool project guys! It looks awesome! Any project that gives you a reason to buy a flamethrower is pretty cool too lol

[@collecttas]

Can you please list the colors you used to paint the boards?

[@mrpanda2655]

Sup, Happy new year too!

[@VCGConstruction]

Looking good #YREWCREW, happy new year!!

[@mandy1927]

Looks great! Do you think this is something someone with 0 experience can do? I really want to do this to fix up my UGLY half bath but I'm nervous cause I've never done any home improvements before. I'm worried about around the outlets, light fixtures and plumbing.

[@WEALRO]

Great job guys , keep it up👍 2019

[@ComputerCoPilot]

Awesome!

[@johnrussell961]

Do I need a nail gun... could I just use a grab adhesive??

[@d-c-g6525]

Great minds think alike! I'm going to do this as a headboard over our master bed. Awesome job guys! Happy New Year

[@davidthomas3903]

I was doing to use these Sam planks but lowes says they are pressure treated and not recommended for interior use(chemicals) Do you have another resource that maybe said it is safe?

[@stephanieadorno6914]

I really like this guys!! Great job and you make it look is super easy :)

[@rodrigofontanez3487]

Great job and love your team work, I have this question you said you guy's used wooden fence boards right? I like to know before I do this to a wall I want to cover did they expand or shrink after a while! Meaning the boards on the wall just need to know you didn't get gaps between the boards because or shrinkage or that they didn't expand!

[@mastaace46]

How were you able to bring the outlet out enough to become flush?

[@bobzthecat82]

just one other thing about nailguns... easy but a like taking skirtings out when you feel like a change... so once you get fed up with it, be prepared to replaster your walls

[@malonecustomdesigns]

Looks great! How did you handle the outlet? Did you just unscrew the outlet from the box and screw it to the wood plank? Otherwise, I would assume it would have appeared to be sunk in the wall.

[@malonecustomdesigns]

@@KristinaSmallhorn Cool. I know they make some remodel boxes that are a little deeper! It turned out great!

[@malonecustomdesigns]

@@KristinaSmallhorn I recently re-did my living room. Tore off wallpaper to reveal paneling underneath. Filled in grooves in paneling with drywall mud and sanded over all the paneling and mud. Then sprayed mud on the paneling for a knock-down texture. Primed and painted and it looks like drywall! New outlets, covers, and baseboards....looks pretty good in my opinion! Did you see the pictures on FB?

[@violetjames7534]

Roll Tide!🔥

[@anthonyyezzo5521]

Did you sand the boards?

[@sergiosausedo1920]

what type of nail gun did you guys use? Could you have used a brad nail gun?

[@KristinaSmallhorn]

Sergio Sausedo yes, it was a brad nail gun.

[@sergiosausedo1920]

@@KristinaSmallhorn thank you very much

[@KristinaSmallhorn]

@@sergiosausedo1920 Thank you for watching and asking your question, I hope your project turns out good.

[@mack364am]

does it fit in the hole? all holes must be filled??

[@MostlyPeacefulCombatVet]

All in all, I think the project turned out great! 😂 Good job Yrew and Eddie!

[@pete22440]

the pine fence planking, was it pressure treated?

[@readwithnatty2832]

@@KristinaSmallhorn in 2 other comments you said it was not treated when asked about health hazards??

[@MILLZ254]

Did you precut all the boards ?

[@Bsprizzle]

“You should fill up every hole” 😂

[@y_o_oj754]

Hi where did you buy those planks ?

[@yasinsaid3251]

What is that you use to burn the wood

[@Terquilla]

What did you paint your edges with after you cut the boards?

[@anarwhal6582]

1:04 “we should fill up every hole” *APPARENTLY*

[@TheSpud1129]

The most epic statement ever. And he said it with a straight face. Bravo!

[@hectoralfaro8445]

Looks great, I was thinking of doing something similar. What kind of nails did you guys use?

[@FlashInYourPan]

Looks good Kristina, I noticed it the last time you were on Creator Chaos... Nice #yrewcrew Eddie you were a good helper buddy... Happy New Year's and good DIY project...