5 Awesome Tools You've NEVER Seen Before!

[@731Woodworks]

▼EXPAND FOR LINKS TO THE TOOLS▼ 🎥 Watch Next - 5 Woodworking Tools Under $30 - kzbin.info/www/bejne/sH7ZfGiwrt2kp6s 🛠 Tools In This Video: Kreg Radius Template Jig (Amazon) - amzn.to/3uZyFD4 Kreg Radius Template Jig (Acme Tools) imp.i284638.net/WDjgEZ WhiteSide 4-Piece Router Bit Set (Amazon) - amzn.to/3FZWOQ4 WhiteSide 4-Piece Router Bit Set (WalMart) - bit.ly/whitesiderouterbits WhiteSide Pattern Bit Only - amzn.to/3HHW1Vi Kreg Clamp for Template - amzn.to/3W8aGgO Milwaukee Orbital Detail Sander (Home Depot)- homedepot.sjv.io/yR0Zn3 Milwaukee Orbital Detail Sander (Acme Tools) - imp.i284638.net/oeEj6e TrigJig Small Square - trigjig.us/products/micro-trim-square-mts-4 TrigJig Angle Finder - trigjig.us/products/af4-angle-finder JackClamp - www.jackclamp.com/products/cabinet-jack-kit-1 JackClamp Accessories - www.jackclamp.com/products/accessories TrigJig Pocket Square - trigjig.us/products/psq7-pocket-square Swanson Carpenters Pencil - amzn.to/3uZb1GY Dowel Jig X - masscaproducts.com/products/dowel-jig-x?aff=3 Other Tools That Made a Cameo in This Video: Milwaukee M18 Fuel Router - homedepot.sjv.io/kjB7q3 Rikon Detail Sander - imp.i284638.net/do1bBq Massca T-Track clamps - amzn.to/3HKnFBa WoodPeckers Delve Square - amzn.to/3FCp0Hr T-Shirt I'm Wearing - www.kerusso.com/products/kerusso-christian-t-shirt-in-christ-alone More of my Favorite Under $30 Tools DFM Square: amzn.to/3Jfb5H2 Thin Rip Jig: amzn.to/3LKm2lB DFM Saw Height Gauge: amzn.to/3jidia1 Spring Clamps: lddy.no/1575h Clamping Squares: lddy.no/1575g Small F-Clamps: lddy.no/157u9 (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order. Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@John-771]

3:00 plus mins in. Milwaukee Oscillating sander not orbital. Also your god is weak compared to the all mighty flying spaghetti monster. He created the galaxy creating pixies that we see in the night sky. lol if that sounds crazy to you, your shirt is just as bad to me.

[@grb024]

I use Dewalt's Oscillating Multi-tool, and I've found that the sander attachment works SO well. I find myself using this instead of an orbital sander whenever possible. The only downside is it doesn't have dust collection...but I'm fine with that.

[@ocdtechtalk]

Thank you for pointing out all the details of the router. Very few people point out the details of how to use the bets what the location up down left right and you do that and it's appreciated.

[@pedroramos6408]

Great video. And I like it the message on your t-shirt. God bless you. Greetings from El Salvador.

[@731Woodworks]

Thank you!

[@mrpolaris39]

Love the T-Shirt. Eph. 2-8

[@Thebratfudlad]

supersitious nonsense

[@MJ-nb1qn]

Great T Shirt. Thanks for the link!

[@harrycaul2494]

Thanks for video- for info the Kregg corner template link is taking me to a circular saw guide.

[@jimbaxter4442]

Love your t-shirt, Amen.

[@MarkLasbyCNC]

Matt, The Trig Jig tools are awesome, excellent fit and finish, solid aluminum and no plastic. I ordered the angle finder AF4 and the micro trim square MTS4 on Nov 30 after you did a short video about Trig Jig. I ordered from the USA website. The tools were shipped from Germany Dec. 7 and arrived on the west coast of Canada Dec. 20. The 2 tools were $118 US (about 20% less than the equivalent Woodpecker before WP adds $48 for shipping to Canada). After Paypal added the exchange rate + 3% fee it came to $167.73 Canadian. A great bargain for such high quality. Thank you for showing me these great tools. You should figure out how to get a commission on the sales from your KZbin Channel.

[@globyois]

Thanks, brother, and that for the words on your T-shirt. No truer words were ever spoken.

[@GizmosShop]

Superrrrr goood Tee Shirt!!!!!

[@NewAgeRed]

Do you have a video showing how the cuts and stuff were made on that little box at around 8:20? Thanks.

[@731Woodworks]

I don't. I made it on the CNC

[@johnd.4385]

Good video, …. GREAT T-shirt !!!!

[@grkuntzmd]

I've watched a few of your review videos and I really like your style. You tell both the good and bad of each product. Keep up the good work!

[@GyWO10]

Once again great video brother!! 👊🏽

[@731Woodworks]

Appreciate it!!

[@gregariouswoodworks1270]

The kreg router template is pretty cool with its interchangeable "bits"

[@WilliamBrown-vj4ud]

Love the shirt by the way!!

[@calderart]

Cool shirt! God bless you bro'!

[@PTC61]

There is a ton of profit for the creators of tool reviews. Sponsors, free tools and links to stores. It is virtually inevitable that most creators will skew to tool reviews-ads once they have a sizable audience.

[@kristoferlowell]

I like the shirt. Thanks for what you do

[@CrochetNewsNetwork]

Great video, great tee shirt! God bless you brother.

[@731Woodworks]

Thanks! You too!

[@RedHeadKevin]

Those Kreg corner jigs look like a dream for customizing on a 3D printer. You could make pretty much any corner you can think of.

[@Byggmester.Hansen]

Great shirt man!

[@RKSingh-pi4dq]

I am impressed with the Kreg Jig. It will make things easy for me.

[@donbrunodelamancha1927]

731 Matt, I have no idea how I missed this first time around but when you got the detail sander, it popped a lightbulb in my head if you have old blades for Oscillating Multi-Tool, you can actually cut sandpaper for whatever Great you want. Attach it to the blade. Use rubber cement if you want and use that as a detail sander. I feel like I need a parrot rubberized foam pads are cheap and easy to come by. I like my DeWalt Much L🫶🏻VE and Respect, and God bless to Y🫵🏻U and Miss Amy‼️✊🏼✊🏼✊🏼🫶🏻🫶🏻🫶🏻

[@BrianRodecker225]

Thanks for sharing all this awesome tool info with us. Can’t wait to start woodworking. Happy Holidays to you and the family

[@allenstark6713]

It's also Xmas time. I'm sure this content is giving gift givers great ideas and will make a lot of happy woodworkers out there come Dec 25th.

[@barrycarlson5265]

Love the shirt!!

[@garyhagger6665]

I purchased the digital magnetic table saw angle finder. I have yet to use it but I'm sure it will be worth its weight in gold.

[@Asta-wl8jz]

Dude! What a great shirt. I instantly subscribed to you. Merry CHRISTmas!!!

[@btrswt35]

These are the kind of subject videos I am a huge fan of. New tools that no one else is promoting that actually work is great.

[@denisfluet9699]

Do you have a specific pencil that you like?

[@njlewis2294]

Love the tee shirt

[@Darman-in8mt]

My good man great video. Someday I will have the workshop I need. You have so many projects. I need to build a few. I like your silent yet Bold witness. We need more Folks that Kneel for the Cross and Stand for the Flag. May the Good Lord Bless and Keep You in the New Year. As for Me Over and Out.

[@FixItFrench]

Great video, i haven’t stopped thinking about that Milwaukee sander since you said something about it a few weeks ago

[@731Woodworks]

It's very nice!

[@johnleeclair]

bro same. And now its on sale!

[@tonyrichmond9428]

Well, we both know that means you're gonna buy it. May as well just go ahead and enjoy using it instead of thinking about.

[@BroRiv]

Great...now I have to go sell MORE rivets and cutting boards to go get these😀. Gonna need a bigger shop soon. Great reviews!

[@731Woodworks]

lol thanks!

[@okafka5446]

@@731Woodworks 5:14 you mention there are no alternatives to this tool that don't cost a lot more - I'm not fussed about the extra cost - what are these more expensive alternatives to the Rikon?

[@731Woodworks]

@@okafka5446 Surf Prep makes one (I think) and Mirka makes one.

[@okafka5446]

@@731Woodworks Smallest Surf Prep makes is 5 inch, smallest Mirka makes is 3 inch - more importantly they're both mains powered. The only one I can think of that's close is the Milwaukee 12v right angled die grinder, but for sanding it spins way too fast. Just thought you might of come across something different, and ideally better engineered for a longer service life.

[@bwoodtick821]

Love the shirt man! Keep up the good work and the good word!

[@akquicksilver]

Merry CHRISTmas sir!

[@731Woodworks]

Merry Christmas

[@snorlaxTACO]

Subscribed! Thanks for the tips/tutorial Brah!

[@731Woodworks]

Thanks for the sub!

[@csimet]

Why does Kreg continue to make stuff out of plastic? I much prefer Aluminum, even if it costs 2x. I got a well made aluminum corner set that costs what the plastic set from Kreg does. I love the TrigJig and have them as well. The angle finder is super handy with the miter saw, since it reads in actual miter saw angle settings and not "true" angles (if you have one, you know what it does).

[@vernsteinbrecker3759]

Great video, adds to the wish list

[@731Woodworks]

Thank you Vern!

[@twisterwiper]

Kreg makes some really clever products. I wish they were more available here in Europe.

[@ratofvengence]

Love the shirt mate!

[@stevenoswalt9125]

Thanks for the review Matt. Cool t-shirt Brother!

[@PNWlawnguy1973]

what is the pencil you are using?

[@gerrylepage4573]

LOVE THE SHIRT BROTHER!!

[@jimm4533]

Thank you for the informative video. Love your shirt!!!

[@DixieNormous1]

Trigjig had the 7" square with level built in for $99 with free shipping,even to US‼️ I'm a general contractor and I love it. Martinez is the only other option and their $179

[@chevycheeseburger3273]

I believe this channel has turned into a tool review Channel instead of woodworking

[@731Woodworks]

What Hank said ☝🏻

[@kamilegier4730]

Well the tool reviews are nice and an important part of the whole picture but I do miss the project videos

[@731Woodworks]

@@kamilegier4730 Understood. Projects are coming soon. I filmed one a couple weeks ago and is being edited now. I do a mix of content.

[@Bluecommando10]

I like both. I would like to see what Mr. 731 Woodworks is working on though. Like a monthly update video or something.

[@davidcorliss]

@chevycheeseburger woodworking videos don't make enough money

[@jamestroy34]

Thanx Matt! Picked up the Massca M2 PRO pocket hole setup you promoted from another video. I already have the Kreg model, but prefer the better build of metals. Trig jig square is out of stock. And was out of stock last time you promoted it. They apparently can’t keep up with making their products for the demand

[@davidhorsfield4462]

Hi Matt. The Milwaukee detail sander looks awesome, but I cannot find the power grid pads in UK! Do you know a source?

[@emilygloeckner667]

Thanks for sharing about the tools. Love the t-shirt the best though.

[@giselly0077]

For the Milwaukee orbital sander, is the contour pad sold separately or does this come with the tool? I can’t seem to find it. Thanks!

[@Jakethebaron]

Great shirt. You got my sub.

[@731Woodworks]

Thanks for the sub!

[@jasontofini3412]

I dont get why you wouldn't just make the kreg jig with some plywood.

[@DavidHodgesKU11]

You could 3d print or have someone 3d print whatever other sizes you want for the router jig.

[@juliejacobs6070]

Love your shirt! Blessings...

[@michaelbradner9141]

What is the pencil you use with the trig jig square? Struggling to find a mechanical pencil that fits those tiny holes of my woodpecker square without constantly breaking….

[@731Woodworks]

It's a Pica marker

[@Rethyus]

ive been building a guitar and im almost at the sanding stage, that m12 with the soft pad would be perfect

[@tughilldog]

impressed by your shirt. and your video is pretty cool as well

[@danieldecareaux9914]

What pencils are you using? I looked at the Swanson link but that doesn’t look like the pencil you were using describing the squares

[@731Woodworks]

That is a Pica brand marker

[@jasonscoggins01]

Nice video thank y’all

[@samlogosz8422]

You are the man. 😁 God bless you and have a merry Christmas.

[@731Woodworks]

Merry Christmas

[@stephenmcgeown]

When will you do some more woodworking/project stuff?

[@731Woodworks]

Project video is being edited now. Should come out the Thursday after Christmas

[@justinbey3426]

The Amazon listing linked for the 4 piece WhiteSide router bit set is saying unavailable. Is there another listing you recommend for the same/similar set?

[@731Woodworks]

Looks like you can get them at Woodcraft www.woodcraft.com/products/whiteside-404-4-piece-compact-router-bit-set-1-4-shank?gclid=Cj0KCQiAtICdBhCLARIsALUBFcFNwwmWmCEPMqXZ-xhZTsOsEEMqLHHWpgGVMgTY-J1b425BasWnANUaApZWEALw_wcB&gclsrc=aw.ds

[@dlehmann61]

Wait!? is that a mechanical carpenters pencil?

[@jamallaidley4718]

Cool update 😎

[@garrybray7173]

Hey Matt I never tried a router cut off bit. I have a cordless dewalt router. Do you set the speed high? You made it look simple and I want to try it.

[@731Woodworks]

The larger the bit, the slower the speed. This one works good at either max speed or slightly under

[@JackOfAllTrades521]

Hey Matt do you do wood working classes? I need to work on my skills and techniques I've bought quite a bit of woodworking tools. I made stuff don't get wrong but I need to work on my joinery mostly.

[@731Woodworks]

Not yet, but coming in early 2023 we will have a course.

[@JackOfAllTrades521]

@@731Woodworks oh ok would it be video base course’s. I been subscribed for a while now to your channel. And would there be a price for the course.oh I like Ryobi is my tool brand.

[@okafka5446]

5:14 you mention there are no alternatives to this tool that don't cost a lot more - I'm not fussed about the extra cost - what are these more expensive alternatives to the Rikon?

[@terrmaso]

Thank you for the review, good sir! I grabbed the Rikon detail sander for $69.99 when it was on sale through Tools Today. When I charged the battery to try it out, it seemed the speed was a bit lack luster. How is the speed on yours when you turn it all the way up? Wondering if it is the tool or if I have a bad battery. Thanks.

[@DobryBoj]

Love your tshirt.

[@p.kwoodarts]

Good 👍👍👍

[@laurensiemens1436]

Hi Merry CHRISTmas. I love your videos...i learn a lot. I notice you had a Millwakee trim router...my question is do they offer a plunge option to the router?

[@PaulKing-ws1po]

Another great video - a suggestion - take a look at Handi-Shims, very handy tool, I seem to be reaching for them all the time. I know you can cut your own, but would they be that accurate and cheap? Color coded and labeled, ties right into my OCD tendencies nicely.

[@JorgeM523]

I agree, great video with great tool ideas and offers. I appreciate these reviews because you always seem to present a tool that will help with a project I am currently working on. Looking at running by Home Depot for the Milwaukee sander. Perfect!

[@731Woodworks]

Glad you like them!

[@JorgeM523]

Just picked one up...on sale for $149.

[@JorgeM523]

UPDATE!!! At checkout it rang up for $129!!! SCORE! Thank you Matt!

[@andrewochoa8507]

The kreg radius template jig isn’t available 🙁🙁🙁

[@5055hunter]

Yes! I bought a set of those red round over jigs, and holding onto it while routing was TERRIFYING! In fact, I used it 1 time and decided that was not for me. The Kreg jig looks like a perfect solution for that.

[@WarriorKidd06]

2nd time you’ve shown trig jig products and the 2nd time I’ve gone to their website and seen that they were completely sold out

[@JohnWilliams-yv7ul]

Love the shirt

[@tacitus7408]

Where can I purchase that shirt?

[@tacitus7408]

I found your link

[@bloop6812]

Well how much is the Milwaukee sander. You stated the round fisk was a hundred bucks.

[@731Woodworks]

Milwaukee sander is $149 if you already have M12 batteries. If not, it's around $229 for the kit with charger and batteries.

[@j.c.almodovar1890]

The 3d printing community has had router jigs similar to kind of tool you showed for a while. I remember seeing Alexandre Chappel on his channel utilize them a lot in his work, where he would use them to make custom templates for corners and small holes.

[@Fishbone8891]

anyone who purchases the Kreg or even the Woodpeckers is a mad man, it's honestly $3-5 worth of material on a cheap 3D printer

[@BrotherofBanshee]

Instead of the Krieg routing template jig wouldn't it be a lot easier to cut what you need out of 1/2" MDF and clamp it down?

[@josevega4698]

I love your shirts so much . Jesus is Lord.

[@jolookstothestars6358]

I'm always looking for tools that make my job easier and better. But most of all I definitely agree with your shirt!! 😉

[@ninthplanet3040]

Kreig Tools = purveyors of all things plastic.

[@TheOneTexan]

A flush trim bit is not the same as a pattern bit. On a flush trim bit the bearing is at the bottom and a pattern bit the bearing is at the top.

[@onecircuit]

Where did you get that dot matrix led KZbin subscriber display?

[@731Woodworks]

Amazon. Brand is called Divoom

[@onecircuit]

@@731Woodworks Awesome! Thanks and God bless brother!

[@TekedixXx]

All I can think about is 3D printing some custom corner jigs that slot into that routing tool. Any FDM printer can handle a job like that, and with PETG or PC the home-made parts could last a long time. I would start by measuring certain dimensions of the part and then snap a picture and build the model off of the picture and measurements.

[@dougtilaran3496]

I like that clamp. Off to waste money !

[@sargente7726]

The Rikon is out of stock at there factory, ToolsToday told me it will be around April before you can buy one.

[@731Woodworks]

Oh wow. Check out the link in my description, they have some at Acme Tools

[@ragmanintx]

Is there any channel that costs me money than 731's? Well, excluding boom boom sticks.😉

[@731Woodworks]

🤣

[@shinymud7]

That’s a very bold statement saying I have never seen these tools before! You make yourself out to be a fool.

[@its_reckoning6667]

3:10 at least take the battery out before touching the bit

[@eliasgarcia1904]

Hey, nice t-shirt. What's the story behind it?

[@lukeblackford1677]

I’d like to see you make a router guide and sell the plans.

[@skivvywaver8437]

Dude, you said these tools were a hundred bucks. Cheapest I could find was $180. For the Milwaukee. Not trying to split hairs here but hey, we are in a recession.

[@731Woodworks]

The Rikon is $100, and I actually said "give or take" The Rikon is actually $70 at Acme Tools if you pre-order now as they are currently back ordered.

[@giselly0077]

I just bought the Milwaukee detail sander for $129 at Home Depot - not online, but the physical store. The price is labeled $179 but when I scanned it the price said $129 - I’m in VA!

[@florencehargis4068]

I don't think my hand would even go around that clamp

[@ivyblu8748]

All the hate on the reviews. Thanks for the videos. It's obvious that you are enjoying success on KZbin and following the view statistics. But remembering the generation of quick growth was teaching us regular folks how to make nice things with basic lumber and tools. A healthy mix will keep you growing long after the fad wood workers fad away.