Did I Find The BEST BUDGET Table Saw with the MOST Features?

[@731Woodworks]

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = Best Planer for Beginner Woodworkers - kzbin.info/www/bejne/hoiqh5KgnJZ7n5o Tools In This Video: Skil Table Saw (Amazon) - amzn.to/3S6GUYe Skil Table Saw (Acme Tools) acmetools.pxf.io/Kj2N3x Skil Table Saw (The Tool Nut) - thetoolnut.sjv.io/VmZZEj Zero Clearance Throat Plates for this Skil Table Saw - amzn.to/3RdhYgg Irwin Table Saw Blade - amzn.to/3cMbrdD CMT Table Saw Blade - amzn.to/3PXywZk Dado Stack - amzn.to/3Bs33dG MicroJig Push Block - amzn.to/3ShPsMe Indexable Square - amzn.to/3JiiWFu Incra V27 Miter Gauge - amzn.to/3bg4XmW 3M WorkTunes - amzn.to/3SoVIlk CNC I Use Shapeoko 4XXL - shop.carbide3d.com/731woodworks Camera Gear I Use - kit.co/731Woodworks/camera-gear-i-use Computer Equipment I Use - kit.co/731Woodworks/731-woodworks-computer-equipment (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@jamesbeecher4431]

This looks like DeWalt made this for Skill. I got the DeWalt about 4 years ago before they started making them smaller. I like the fence and set up and need the job site setup because my 'shop' is . . . well. ah, my back deck. So It gets pulled out of shed and put away. Keep up the good work.

[@BethRavengeGreen]

My daughters and I have a small business, we've been slowly increasing our wood products and the skill level involved. I'm so excited to tell you that we have finally earned enough to buy this Skil table saw!! We've been wanting it so bad, since we saw your review on it. I'm giddy, and we've made our first pile of "saw glitter" today! We're making squirrel feeders. Thank you so much for all the work and care you put into your videos, you are a blessing to us! I'd show you pics if I knew where to put them..haha God bless you brother! ❤

[@ScooterMcDooter69]

Fun Fact / Saw Hack : The Dewalt fence fits on this SKIL and gets you another 5" Rip. However the height from the table to the bottom of the fence is different and leaves a GAP. However with creativity this can be fixed.

[@realJohnJohn]

Please advice if you get them for the same price right now wish would get the SKIL table or DeWalt?

[@carolwingert64]

I just want to thank you for this video. My father passed away a few years ago and I needed someone with knowledge that I could trust. You are that man. Thank you for everything you do on this channel.

[@eclecticcynic9448]

Time for a follow up on this saw, as Skil has made some improvements. Bought one this week from the local Menards and noticed that the newest ones on the floor came in a much cooler box, which was black with white lettering. Inside I discovered that there was a separate smaller riving knife included so they are now removeable. The throat plate is metal not plastic, and at least on mine, the fence is a nice perpendicular 90 degrees. Thanks for your initial review which got me looking at this saw in the first place.

[@screw-luck4636]

Did they increase the overall height when unfolded? I see lowes has it listed as 36" and skil still says 32".

[@eclecticcynic9448]

Mine comes in at 33@@screw-luck4636

[@SpartanORGN]

⁠watching this video, they must have made it bigger. I'm 6ft and the one in this video looks much lower than my saw is on me. It's a pretty comfortable height for me to work with. Also I think the fence capacity is wider than the 25" he mentioned. So they must have made a bunch of changes. Additionally, I got mine on black Friday from menards for $265. So be on the lookout for deals

[@audimechanic]

I wonder if the throat plate is compatible with older models. I've seen the bowing as a complaint.

[@Michael-cb3dz]

​@@screw-luck4636 i just got mine in today and no they did not its 33 inches high i wished it would have been 36 but man im so happy with it

[@michaelkelley1943]

After other reviews (this was a year ago), I purchased this very table saw. And, after a year of use, I can say I'm very glad I did! It performs beautifully and handles everything I throw at it. My only issue so far is the table surface marrs very easily. And that's it! Everything else about it works fan-flippin-tastic! Highly recommended 👍

[@user-gk3lu1gg9t]

It really does. Mine is scratched to hell after a few uses

[@elvisvelez6609]

I actually bought one last Saturday for 200 from a gentleman that had bought it for a project and never used it. Brand new in the box.

[@sj6404]

@@elvisvelez6609 yeah, that's the kind of deal I just love!

[@modernNeanderthal800]

​@@user-gk3lu1gg9t Does that affect the ability to cut? How are vibrations? What's the material made of?

[@user-gk3lu1gg9t]

@@modernNeanderthal800 It hasn't seemed to affect it at all. They aren't deep gouges, just surface scrapes. Makes sense since it's a cast aluminum surface. It's a very solid table saw though, no issues with vibration or being level. It is a tad louder than other table saws I've used, that's my only complaint

[@kennykaeck3595]

I bought this saw a couple of weeks ago based on this review. This is my first table saw and I’ve gotten a lot of wood through it already. Adjustments are simple and everything works like it should. Thanks for pointing this rookie in the right direction!

[@joshuaquick5511]

I recently purchased this saw based on one of your more recent videos. Just a tip to other viewers who own guis saw. There is a special throat plate made specifically for use with a dado stack. This plate included a special arbor nut that claimrs to make the use of a dado stack on this saw safer. See your owners manual for the item number. I found mine in acme tools

[@deejaideel4246]

About three minutes in and this video is the absolute BEST setup video I have seen on YT! I bought this table saw about a year ago and am now getting around to unboxing and using it. The last time I used a table saw was in high school shop class DECADES ago, so I'm definitely a novice. You included aspects of setup and use that people like me need, as we're going it alone. Thank you so much for a clear, well-informed, professional-level video. New subcriber.

[@731Woodworks]

Wow, thanks!

[@Zack-xz1ph]

ability to take dados was the final straw, this is will my christmas present to myself 😎👍

[@natecoelho9516]

I just bought this saw TODAY and I paid 259 for it, just a heads up. Went to Lowes where they had it in stock and priced at 269, I had them price match Walmart which was online order only at 259! Watched this after buying it and im so glad I made the purchase!

[@Room1sixtyfive]

I just paid 244 after taxes on Amazon bundled with the dado insert.

[@dronepilotflyby9481]

It's now only $300 on Amazon and I bought one because of your video. Thank you. I wanted to replace my ancient Craftsmen bench model because it had no protection pieces, a friction fit fence and no t-channel for the miter. I'm just a hobbyist so it's not worn out but the motor noise of the of the Craftsman is twice that of the Skil. The rack and pinion fence, guards and other features you highlighted sold me on this.

[@V200DIESEL]

Thank you for helping in my decision to purchase this saw. Your video was straight to the point and made me more comfortable in my choice. It also answered some questions on it's ability.

[@garypartain3045]

I bought after your recommendation From Walmart for 300 bucks. Great so far. I even started making Microjig Matchfit jigs to use with it. I have made your channel my top wood working channel because of your faith based Christian view and advice. Im also a police officer in a high crime city in VA. For 26 years I did carpentry before law enforcement. I enjoy it as a way to deal with the pressures of the job. I really admire your commitment to the craft and I appreciate your service as a police officer and a man of God. I do like your videos regarding faith and world advice fulfilling the great commission we have all been Called to fulfill , more people need to hear it. Keep it up, your content has just gotten better over years.

[@731Woodworks]

Thanks Gary and thank you for your service!

[@feron450]

Thank you for your service sir, stay safe

[@andersonolive4553]

Just ordered mine today! Found out about this saw when you put this video out I am EXTREMELY excited. First tablesaw and the only tool I need to have a fully functioning shop. I will post an update once it arrives.

[@norm5785]

Very useful for small shop or those that have a need to transport for work. Nice fence size And high low feature. Nice price for value. Thank you for sharing this with us stay safe happy and healthy from Henrico County Virginia

[@corbettlafrance3352]

Just purchased this saw and have been spending a fair bit of time getting everything squared up before I actually put it to work. I love the amount of adjustments that are available on this saw it is a definite upgrade from my last saw. The one issue I have so far is that the table seems to dip from the miter gauge to the blade, when I put a straight edge across the table perpendicular to the blade there is a definite gap that starts at about 1.5" from the throat plate on either side. Not sure if this will cause any issues but I am concerned that with smaller rip cuts it may cause the cut to be off 90°. I really appreciate the content you put out and use many of your reviews/recommendations as I build up my tool selection.

[@anthonyfox7380]

Bought mine as a Father’s Day gift and just started putting it to use. Thing is amazing for the price. Simple adjustments to make sure everything was square and exact. No complaints and fits my garage shop perfectly.

[@QuietJust]

I actually just bought this. Haven't even pulled it out of the box yet. After much research I bought this because of everything mentioned especially the fence. Glad to hear that I made a good purchase.

[@stevefinlay8886]

Great to see a believer being bold on his channel. Love the t-shirts and the, ‘Greatest Free Gift,’ video that you made available. Awesome brother! I pray it is being effective leading others to Christ Our Lord.

[@toddparker2924]

I've had this saw for about 2 years now. I love it, does everything that I need it to do. Love the folding legs, great for transportation to the jobsite. Small and compact. Great rack and pinion, and extension. Would definitely recommend for a first time buyer or someone on a budget.

[@tommycollier9172]

I've been using this saw for the last year and totally happy with it.

[@leefottler4744]

25 years ago I worked in the “tool corral” at Home Depot. Even back then, these Skil table saws were packed with features the other big names didn’t have. They were half the price in many cases and more than double the features. They weren’t a super rugged job site saw, but really fit the bill for homeowners and light commercial use. Probably the biggest downside , was the name. Skil, once a leader in the power tool field , was considered sub-standard to many tradesmen. Glad I found your video, quite by chance, as I am in the market for a tablesaw for my handyman business, guess I will have to reconsider this old friend !

[@reyescastellanoz4688]

I really enjoy your videos, you get to the point without all the nonsense and comedy !! Keep up the good work, as a 59 year old novice woodworker I'm learning a lot from you !!

[@trentthompson2928]

Awesome!! I’m a 54 year old novice woodworker!!!

[@woodworksbygrampies1284]

I'll turn 50 in a few months AND I'm a novice but I hope I don't get tired of humor and nonsense as I get older. 😂Have a good one! 👍

[@richardbriggs8662]

Great video. I’ve been doing some research on table saws to see what might work best for me as I want to start doing some woodworking to help with income. Once I can afford it, this’ll be the one I go with! I definitely appreciate professionals like you who like to help out newer woodworkers just getting into the craft!

[@timtaylor253]

Thanks!

[@731Woodworks]

Awesome! Thank you!

[@nicolassmith8739]

Definitely the best place to get more knowledge!!!! I am just getting started and learning what to get and not to get…. Have to say thank you very much for all your videos

[@731Woodworks]

Thank you

[@MagTheGrate]

Thank you for this video! I already had a nice table saw, but I wanted a way to make box joints and dado joints while minimizing the setup. I bought this saw and the Freud Dado set. For the price, for me, it was worth it to have a second dedicated table saw to keep the dado blades on. This is a great setup! You also hold the distinction of being the first person that I have ever clicked affiliate links for. Your videos have given me a great amount of value. Cheers!

[@JonasSkullerud]

After watching and reading tons of reviews I ended up going for the Metabo TS 254 M. Thanks for listing up what’s important for a saw.

[@Murrray_Duncan]

I have this saw in New Zealand. If you look at the table bed there is a rabbet you can sit the handle of the rear collar spanner against when putting pressure on the front nut spanner. No need for a arbor lock, just use the rabbets. Changing blades is actually very easy when you use this feature.

[@rattlhed1]

Thanks for this video. I’ve been using a craftsman portable table saw for about 15 years. It was one of the first shop tools I ever bought but it’s showing its age and does not make straight cuts. I’ve finally decided to get something I can rely on and just ordered from ACME. Can’t wait to get it!!

[@aubreytingler4524]

Bought this saw about 6 months ago and I couldn't be happier with it for the price. Heck, half the more expensive job site saws seem like they don't have the same amount of features as this one. It is loud, especially in roughly 10x8 section of my basement that I work in so ear pro is a must. Even outside it's an annoying noise and I prefer to wear ear pro. Best money I've spent on a tool yet.

[@deezle1460]

I have it's cousin... the Skilsaw wormdrive spt-99t (8&1/4") smaller blade and about 100 bucks more expensive BUT I am pleased so far ...good brand... chose it over the similar dewalt set up, I am happy with it.

[@romanhwc]

Fantastic review. I normally dont leave comments, but i had to commend you on the thoroughness of this review. Great job.

[@roccjar]

Testimony for the Skil Table Saw... I've been in the market for "budget" table saw and after watching your review and several others decided to purchase the Skil Table Saw. I just got it and spent the last couple of days making sure everything was square and properly aligned after swapping out the factory blade for a 60 tooth Diablo blade. The FIRST 2x4 I ripped I noticed that the saw seemed to bog down but figured I was just feeding it through too fast. I reset the fence to rip another slice off the board and it again bogged down at the same point in board. I knew there were no knots in the board so when checked to see if there was anything there I saw the problem. I had cut through a nail not once but TWICE. It was completely embedded below the surface of the board and being a commercial board from a big box store it never occurred to me there would be a nail in it. However, the saw and blade both survived so I don't know if that's a plus for the saw, the blade or both.

[@tomb7890]

A 60 tooth blade is for cross cuts and plywood/fine finish on sheet goods. Use the supplied blade for rip cuts. Or a similar replacement blade. This channel has a great blade explanation video.

[@DavidRitchey-x2g]

Even though the review is a year old, I bought the saw and agree with your assessment.Thank you for what you are doing through the channel and what it means to a beginner woodworker!

[@DarksouIjah]

I’m a new subscriber and brand spanking new to woodworking. I just purchased this saw bc of your in depth knowledge and review. I am excited to start this new hobby.

[@731Woodworks]

Congrats!

[@goggutube]

I have an old hand me down Ryobi, no rack and pinion fence. Been looking for a new one. Been looking primarily at cordless units. But man, built in legs, onboard storage for accessories, quality of cutting, I just might be sold on this. And it's like at least $100 less than the cordless. If I see this on a sale, I'm going to get it. Thank you for the very detailed review, and demonstration of the use cases. It was easy and thorough. Really appreciate it. The 25.5 cutting width seems great to me. I think both the Milwaukee and DeWalt's are like 24.5. And great suggestion on the miter gauge. Thanks again! God Bless!

[@pamcadd8658]

Thanks for your detailed review! Just purchased this (Sept. 2023) for $299 from Walmart, free shipping. Great price!

[@gonebyrv9748]

At 5:22 when you started to cut the walnut, why was the walnut pre-cut for several inches?

[@sinclairamissah7006]

I just returned a Kobalt table saw. Been stuck contemplating on which one to get next. This is the information I needed. Thanks.

[@MaribuStork]

So I have this saw and I've had it for about 18 months. I only do occasional DIY stuff, but have used it on very hard Beechwood Butcher block where I resawed a 6 inch portion of a desk cut-off. And some regular 3/4 hard maple, both with no issues, amond other easier woods. I did install a Diablo combination blade and aftermarket mitre guage, but the saw is actually really good. I like it a lot, it's easy to use, very convenient being able to fold it up and put it in a closet. I got this saw after I had a Crafstman saw that was a total piece of junk. Uneven surface, nothing was square, the mitre slots were a proprietary T shape. I returned it. This Skil saw was only like 40 bucks more and it was night and day. Would 100% recommend.

[@Ben-ej5bh]

Today i went to a tool consignment shop (sorta like an amazon liquidation store) and was looking for some clamps and my mom walked down a row and there were 2 or 3 table saws... but in the midst of all of them, was a hidden gem. A 10" craftsman tablesaw with a standalone stand, manual, push stick, blade guard, blade change wrenches, dust bag, fence, miter guage, and a blade, all gor 149.99. The table saw is now in my shop!

[@MansterBear]

This is good news to me. I had the cheapest Menards saw for a few years and I hated the fence so much. A couple years ago I fenced in about half an anchor, and the design my wife wanted has a dado groove in every 2x4 to frame cattle panel. A TON of dado-ing. I decided I needed a new table saw, and all I knew is I wanted a geared fence and this one seemed solid. A couple years later and I’m getting more into wood working and have been binging your channel and others. It’s nice to see a tool recommended that I already have lol

[@Evolution_Woodworks]

I bought the 8 1/4 skilsaw wormdrive version after much debate and I'm kinda glad I did. There is a blade lock button, so you only need 1 wrench

[@OSRS_KQs]

I figured out a cool way to keep my shop vac hose connections in place. I wrap 2 strips of the same side of velcro (1 on the end of the shop vac hose and the other on the collection hose it attaches to) and a single strip of the other side of velcro which bridges the gap and keeps it in place.

[@BassadorWoodworking]

This video is extremely well timed! I have been looking for a small saw for my father's basement. This one just made it to the top of the list. Thank you!

[@jimmyreuben6919]

I've just bought one of these after your recommendation Matt, haven't done a cut with it yet just keep looking at it. Lol

[@dima3401]

The blade adjustment is the best. So easy to make it parallel to the miter slots.

[@markclausen7812]

I just bought this saw based on this video, and I have to say it is amazing! After struggling for years with a Ryobi contractor (job site) saw, the difference is night and day. It was almost perfect out of the box, but I still spent about an hour tweaking the adjustments to get as close to perfect as I could. I haven't yet done much with it, but I can really tell the difference. Thanks!

[@attepitkanen7358]

Ordered one today, had chance to fiddle bit in local HW store prior buying, and phew, can't wait to test it!

[@slam854]

Just unboxed and did preliminary adjustments. I am clearing garage and off loading my HUGE Delta Unisaw. Garage floor is so bad there is no place to make it useable. I do my future work out on the new driveway. Looking forward to doing some woodworking again.

[@aaronnelson7702]

Uh.. This IS what I need. Wow. Random video in my feed actually paid off.

[@sj6404]

Thanks for another great video. I'm semi-retiring this year and plan to do a lot more carpentry. Going to get rid of my basic table saw and pick up something new. This seems like a nice saw for a beginner but I'm more interested in something that will allow me to take my workworking skills to the next level. I'd like to see you do a video on the top tools and give an example for base model, mid-level, and higher end. I'd be more interested in the mid-level but I'd like to see your recommendations for some higher end items: table saw, router, planer, miter saw, etc. thanks again

[@normferguson2769]

I make sure I can hang some weights off the bottom because a 4’x8’ sheet (or bigger) will want to flip the saw over due to friction on the table.

[@jrobiii1]

Woot! looks like not being the first anywhere has finally paid off. This saw is now $299 on Amazon. Thanks for the review!

[@Bonky2004]

I got one too it's a great table saw Only i installed a soft start for a smooth start And i want to replace the plastic dust plate I buy it for 260 euro in the Netherlands

[@flyfliker]

I purchased this saw from Walmart on line $299. Your review influenced my decision. Thanks

[@zARies31]

I had the dewalt its about 7 years old great saw still have it but i bought this about a year ago when i seen it come out the dewalt is setting in the corner now I love this thing im not a high end woodworker by any means but I get peace from building things and I have used this to remodel our home other than the obvious miter gauge an blade which is every jobsite saws downfall this is the best saw in this price point you will ever buy hands down

[@thomasfamilyvideos7393]

Thank you for this review. I got it in 2 days before knee surgery. It’s been hard looking at the box without opening :).

[@dougbeard7624]

Every time I look for some info, you've got it. I like your delivery and detail. Well earned sub.

[@uriel-heavensguardian8949]

No one local has it. But this one is for me. Thanks for sharing

[@r3dsnapper]

Thank you for this recommendation! I've been struggling with an old Bosch and its nasty fence system. DeWalt has a great system but with my budget and the need for a 10" it's out of the question. You rule the school!

[@pedrorivera-soto7566]

I bought this table saw before I even saw this review and I love it. I also bought the zero clearance plate and the dado plate and it came with a special nut to have the maximum width that the saw is supposed to do. I also wished that skill would have made the fence go to 30 inches. Other than that, this my saw until I can get a cabinet saw

[@mrmoneybagz]

What a beautiful workshop you have. Very neat and well designed. And your tips are exactly what I was looking for, as a beginner woodworker.

[@LarryDickman1]

A clean shop is the sign of a sick mind. 😋

[@johnalligood7150]

DUDE! This is just what I need for my install jos.

[@jolebole-yt]

Excelent value table saw packed with features. I was able to snatch one from Menards for $269. Thanks for the great review.

[@jimholt1635]

I had to move 8 years ago, had to get a storage building to hold up some of our stuff till we got set up,I misplaced the fence for my tablesaw, so went and got a Porter cable 10", haved it on every job sense, still works very well, and I am the one that thought it wouldn't, last out the job.

[@joshscott009]

I have this saw and it’s been great for me being a woodworking hobbyist. The rack and pinion fence is what drew me in to get this saw.

[@HeliRy]

Is it true that the riving knife can’t be removed, to make a zero clearance insert?

[@bruceberry1384]

Shredded that tuba six! Thank you sir for the video, very timely for me

[@kevinbradley57]

I bought the Skil TB6307-00 today and was surprised that it came with a plastic throat plate. In another video, you said the newer models come with a metal throat plate. I'll be calling Skil tomorrow (today's Sunday) to see if I can get a metal one.

[@ArrowHeadForge]

I was glad to see it unplugged lol! I was looking for the power cord! I’m not saying you wouldn’t but I know many ppl who don’t

[@neilmoore7186]

Owned this saw for over a year now, put it through its paces. Hasn’t disappointed. You have mis-spoken about its dado capacity. It will accept a full dado stack, though not with the stock insert. Skil sells a dado throat plate but what’s the fun in not making a zero clearance or a dado plate. 👍 good review, came out after I bought mine but solidified the purchase.

[@charlesdjones1]

Getting ready to build some cabinets. The two low end china freight models had decent reviews and excellent prices, but had next to no rip capacity. The Skil is still within the range of what I consider affordable, and offers a decent rip capacity. This review was all I needed, thanks.

[@MemelordSupreme]

The Hercules saw is also another super solid machine. These two are practically identical. If you're in the market for a budget friendly machine it seems the Skil and Hercules ones are the best bangs for the buck right now. The rack and pinion are the best features for these. Especially since most portable saws major flaws are the fence systems.

[@hillustration]

I agree. I think I like the Hercules a little better, but the Skil is a very solid saw.

[@mmjay7078]

Hercules is trash

[@MemelordSupreme]

@@mmjay7078 If you say so. My experience has been the complete opposite. They are better built than other brands in the same price bracket like Ryobi for example.

[@NOVADOSED]

@mmjay7078 that's too bad, you must've got a bad unit.. I own their 12" compound miter and it's an absolute beast never an issue and true cuts..

[@charlesdjones1]

@@MemelordSupreme just paint it yellow and watch him slob on that adjuster knob.

[@steveyknoxville]

New Sub from me. I've watched them all, this is by far THE BEST most comprehensive review of this saw on KZbin. Thanks for your efforts. I'll be picking one up tomorrow... 👍🏻😁

[@731Woodworks]

Thank you Steve!

[@adgieem1]

Btw. I think you do a great job with your informative videos. I look for them constantly.

[@nore8141]

Finally found one at the Canadian Tire store in Montreal for $399 Canadian. Going to pick it up today. Thanks for the in-depth review on this table saw. ❤

[@simplyphil.photography164]

Thank you for the review, l have been looking at others, just going to upgrade from a 8 inch starter saw, and its about the price l can go for, DIY only, just to give me something to do as l'm retired, l'm in the UK and it is available on Amazon UK

[@jrep88]

Good review. This was my first table saw. I changed to a Diablo blade right out of the gate. The saw is LOUD. There is a lot of people that would be impressed with this saw if they tried it. Definitely a good purchase on deciding whether to further pursue your hobby/career.

[@sweedenburg]

I absolutely LOVED my TS-3600 and only made the switch when I got a crazy deal on the Delta T2. The noise was my only real complaint for all the hobby/furniture work I was doing. Tamar has done great work with her Delta over at 3x3 Custom, but I'll bet the SKIL would outperform pretty much all of the other jobsite saws at this price point.

[@ethankaufman8577]

@@sweedenburg yeah I saw the Delta T2 for $60 more than this Skil and I think I'll go delta

[@AlmightyAetius]

I’ve had this saw for 2 years now and it’s a love hate relationship. Running into this video reminds me that it’s an absolutely great saw for beginners and I could get much more use out of it if I didn’t outgrow it. When I do upgrade I will be keeping this saw for its intended use, being my portable saw. If you’re on the fence this is a great saw to start on

[@S0Ev0]

I am on the fence about this saw and the Hercules table saw from Harbor freight. What are some of the things you love and hate about this saw? TIA!

[@AlmightyAetius]

@@S0Ev0 honestly the only thing I hate about it is that it’s not bigger. It has a ton of adjustability that makes up for it though. I also don’t like the saw blade cover that came with it but I just made my own zero clearance plate and that fixed that

[@eddievo6798]

​@@AlmightyAetius If those are the downsides of this saw then I'm all for it. This is going to be my first table saw. And I'm planning on building a workbench to sit this table saw and my miter saw so I think the size wont be too much of an issue. Between your feedback and Matt's review I feel good about purchasing this purchase. Thanks guys.

[@AlmightyAetius]

@@eddievo6798 I’m finally building a work table that this will fit in so my only issue will be solved and then I predict many more projects with this saw. Happy building!

[@LukeHoersten]

I bought the Skil saw on your rec and couldn’t be happier. I didn’t know it existed and probably would have been fine with the standard Dewalt everyone goes with but the Skil features suit my needs perfectly and with a larger blade! Thanks!

[@RCDronage]

Are you still happy with the purchase?

[@joef6851]

I picked up this table saw for my garage it is a great saw. Set up was a breeze. I just finished building all my cabinets for our kitchen it was very accurate for all the cuts. Great saw no complaints and budget friendly

[@bigd835]

Skil sells solid stuff. thanks for an excellent review. you sold me a saw.

[@charliebronson1274]

Mine is arriving tomorrow from Walmart. Can't wait to use it. Great review.

[@Greg8872]

Finally! I got to make first cuts with this saw, that I bought back when it went on sale (hope you got the affiliate credit :). Finally in my house and they just finished foundation repairs this evening... Couln't wait to start setting up "my shop". Granted only did basic cuts right now, but that thing cuts like it is cutting though butter!! Already got first injury, but that is on knucle of my thumb when releasing the knife lock and my thumb grazed a tooth. Now off to do the responsible thing, reading the whole manual. Thanks for the video and recomendation!

[@duane2243]

Picked one up yesterday-Skil saw--good show!

[@originalguckfoogle]

You don't need a built in blade lock, just place a small piece of scrap wood so the tooth of the saw stops on it when you turn the wrench. I'd also recommend either slipping a pipe over the wrench handle or getting a longer handle wrench to increase your leverage. It will also be much easier on your back, this type of work is hard enough on it already.

[@sarasharick5209]

I like this “best budget [tool]” series. I watched the one for the Wen miter saw the other day and I did actually eventually buy that one. This table saw is looking good too.

[@shimcgraw1734]

Was looking at the dewalt and came across your review. I will definitely be getting this one. I hope the ppl at SKIL take notice, endorse this video and compensate you.

[@markmoore8297]

Awesome Video! I just purchased this saw for299.00 with free shipping from Walmart.They delivered it in two days!A great saw.I was wondering if anyone had tried the rip fence from the worm drive saw on it.Seems like it would be a nice upgrade if it fit.

[@dustinlee3529]

I have this saw, and I share your views on it. Highly recommend!

[@zacharyjohnston70]

build some well through out tables around that and it would work for a long time. im glad you did this. i would never have considered skill otherwis

[@ivanivonovich9863]

Outside of the Tools that come with the saw, can one get a "narrow/slender wrench in to do the blade change? I have never liked those stamped steel "tools" that come with the saw. And as you said, the fit of the "tool" left something to be desired.

[@731Woodworks]

I'm not sure if you can find one of those or not

[@liftny]

Thank you for the clarity on your video and well thought out presentation of this table saw.

[@TPoPArt]

Thanks for doing all these tool tests. It helps me have a little more confidence in getting my woodworking set up. I’m still scared though. lol

[@OneIdeaTooMany]

I watched the short and came here to watch the full review. I already have a DeWalt table saw and I picked mainly because of the fence and what's available in my country. Great review btw. Thank you!

[@Rando88_]

How do you think this compares to the compact dewalt?

[@canonman223]

Of the high and low position of the fence, when would you ever use the upper position? I understand the lower position being at the level of the rest of the table to support the board you’re cutting.

[@timmartin8128]

This just replaced my 8" DeWalt for my jobsite saw. This thing is great once you dial it in.

[@AbrahamSanchez]

I bought this saw blindly without doing any research and I was very impressed and happy with the purchase. I got it for $299, which beats out the cheap saws at harbor freight

[@geriengel]

For a beginner, which do you think would be better, the skil or Dewalt DWE7485?

[@joshua24shea]

Just got mine in today. Had a gifted ryobi table saw that just was not it for what I’m doing in my shop. Looking forward to all the things I’ll make with it thanks you you man