Best AFFORDABLE Compact 10'' TABLE SAW (You Will Never Guess The Brand)

[@ELVISRN1]

this guy needs to demo everything on the planet , fast,informative and says whats on his mind.THANKS!

[@rangerguy196]

Agreed! This guy is phenomenal! I’m buying one of these saws! Amazon here I come!

[@franmcdonagh2929]

Xxxxx

[@ericculver115]

Thus guy talks way to much check project farm. He has no Sponsors and does honest non biased reviews. Much better than Vince for reviews sorry Vince

[@Sly_Wolf_1]

I got him to review my girlfriend before proposing. He saved me a lot of money and time!

[@sonofsandwiches6892]

I have this saw, bought about a year ago. Changes I've made to it: 1. Added a soft-start module (rewiring required). 2. Replaced the crappy miter gauge with one from Kregg. 3. Replaced the 24 tooth blade with a decent one 4. Bought a matching zero-clearance throat plate 5. Folded the legs down - they actually have tiny "feet" when folded to set on a table. 6. Built an outfeed table which the saw sits in (Thanks to 3x3 Custom on KZbin for this idea) 7. Bought a dado set from Freud. 8. Bought a push block (can't remember the brand) to save my fingers. The saw itself is fine, but underpowered for very large cuts. However the rack and pinion fence is great and adjustments for blade alignment is easy to do. This will be fine until I move up to a used cabinet saw.

[@rudywilliams6238]

Good afternoon, could you tell me what brand of soft start device you bought and if it worked for you, I would be interested in putting it on my saw, but I have been afraid of losing it.

[@rudywilliams6238]

I would like to install a soft start module to my Skil table saw too, could you tell me where you bought the module and how it went with that adaptation, do you think it is worth it?

[@jerrykramer7025]

Great video and love how you showed us to calibrate the saw. Most others wouldn't take the time. That why your the MAN.

[@kirbyberry9970]

Setup seems fairy easy

[@lewisdye1002]

You did this very well, all the important points covered and explained. As a cabinetmaker for 40+ years, I have seen and used most types of saws from massive 12" production units to drag to the jobsite and hope you get lucky. This one would be welcome anywhere good work is being done. It would be really helpful if you did a demo of the slightly less used but very necessary operations such as angled cuts, dado setups and mitre guage and very thin piece. Also, both for ease and safety, show how to build a simple, easily attached and removed outfeed support platform. Thanks for your efforts to bring pro level results to the "prosumer".

[@VCGConstruction]

Thanks Lewis, we appreciate your feedback!

[@Evan-hq5dt]

I just picked this up as my first table saw during a whole home renovation. I chose this after wonderful experiences with their cordless driver and oscillating multi-tool. They're affordable, come with chargers and batteries that aren't trash, and are very powerful. I've been very impressed with what Skil has to offer and this saw has exceeded my expectations at this price point. Obviously, I don't have much to compare it to, but I can say its been a workhorse and made me a repeat customer of Skil products.

[@dasboot360]

New home owner. Getting into DIY. You’re my go to guy for reviews and recommendations. Keep up the good work with the channel! Thanks

[@PaulPaid]

Check out the Project Farm channel too.

[@DManBreaux]

Best Demo video I've seen, well done. No BS, just the facts and practical use of a product. When I was shopping for tool boxes, I saw your videos. Now shopping for a table saw, I came across your channel again. Like before, Best, most realistic take on a product. Thank you!

[@darodes]

I’m revisiting this video for the third time.. peaked my interest months ago. Revisited when I started my hunt for an affordable table saw for DIY stuff…. Now I’m watching again since this saw was just delivered today! I’m excited to try it! Thanks again Vince!

[@markhalversen7566]

I'm a beginner DIY guy, picked up on one of these on sale for just under $200 and have not been disappointed. Cuts great right out of the box and for what I've been doing it's been awesome. Great review - keep 'em coming!

[@roughroosterknifesharpenin5531]

I've got this table saw. And it's a damn good saw. It struggles past the 1 inch thick stuff. I installed a DeWalt construction 60 tooth blade on mine. It really woke up the saw. Also on the wide rips if you have the fence to the left, flip the guard piece down and it supports the piece you are cutting. I had the DeWalt jobsite saw and I like this one better.

[@ryanelliott4538]

Just bought it. Arrives tomorrow. Super excited to build this bed I’m going to be working on. The red and Skil sold me.

[@galenjeffryes7766]

Just got this saw for Christmas as a replacement for my 30-year-old middle shelf DIY portable saw. The breakdown and other info were very helpful and I'm really looking forward to putting it to use.

[@VCGConstruction]

Glad the video helped!

[@andrewshoffitt3970]

Only thing I would love to see you put on the dado stack to see how a beginner DIYer could do it.

[@d1bigshifter737]

Measure Twice Cut onece. Now when i teach my young carpenter apprentice to check the blade curf ill act like ive been a seasoned wood butcher for years . Thanks Vinny from the Motor City!!!

[@72plyduster1]

Watched a couple of videos on this saw, I am not a professional wood worker but am a diy person who has built many items, this saw impressed me enough to purchase this saw. Wanted the rack and pinion fence, wanted a stand, wanted simple adjustments, I’m 77 years young so wanted something that would not be to heavy. Prior to this purchase I would have to return home to rip long cuts now I can use this saw. Just a note I have a Dewalt miter saw and stand that I love. Great video

[@FALL3Nx3MPIR3]

I love how in depth he goes into every tool.

[@toddvail2630]

Great informative video!!! My wife just bought this saw for me, I'm very impressed by its functionality. Super big improvement from the 20yr old ryobi I had.

[@scottbionicnerf8727]

I love to get honest input from someone who has professionally used a multitude of tool brands, and is able to give insightful tips, free advice as you follow along with the video. I really appreciate all the work you put into the channel and into your profession.😎🤠🤓😇

[@stankolodin5586]

Dang man, VCG Construction was so lucky to get sponsored by VCG Construction. So lucky.

[@djjinerson]

@vcg Vince.....Just unboxed and set mine up. Thank you for the informative review. 90 out of the box. Made a couple test cuts, and very impressed with the power, accuracy of cut (did some rip 45's through 2" for a beefy French cleat, had a razors edge on the piece of wood) So far very happy, besides scratches on the table (amazon). But so far as owning it for about an hour I am very happy with your recommendation. Thanks VCG

[@chinese244]

Dear Sir, thank you very much for this great introduction and DEMO. Love how you explain it.......simple LINGUINI ......NO CRAZY BACKGROUND MUSIC.........business only. I bought this saw and ready to unpack ...with your video I have more confidence in using this machine......Thank you again !

[@VCGConstruction]

Glad it was helpful!

[@davesradioshack]

Great video. I'm retiring soon, and building up a small woodworking shop in my large barn. I had just bought this Skil table saw, and got it set up. I've not used a table saw since high school shop class back in the late 1970s, so I've been a little apprehensive getting back into these machines. Your video gives me a lot of confidence that for the small projects I have in mind that I made a good choice in this saw. I really like your down-to-earth demo style and presentation - thanks for posting this.

[@okgentfarmer]

Well done review. I am and older guy on a fixed income and just getting my first table saw for diy projects. This video confirmed what I thought based on my online research. I will be going to my local Lowe's in the morning.

[@richardciardo157]

Thank you for the great demo. I just bought one, and don't have any experience with this kind of tool. So, hopefully you have saved me a trip to the Emergency Room! Yes, I read all the safety instructions, but it helps to visualize, especially when you are new at it!

[@MovieMakingMan]

I love all your videos!!! You are so great at explaining every detail and love your sense of humor! Is this table saw adequate for one person to cut strips from 4x8 sheets of MDF? I’m renovating my house and like most I’m on a budget. I’d like to cut my own boards for trim on my windows and doors. Keep up the fantastic videos! It’d be cool to have a beer with you! 😀.

[@VCGConstruction]

You buying first round! 👍🏻

[@buckbuchanan830]

Thank you for walking us through setting up the Guard system. The Manual did say it, but it was a lot easier to see how you did it.

[@rickiepeebles9912]

Best Skil table saw tutorial out there. Just purchased one. Good info. Thanks!

[@dongillette]

Just took delivery of this thing and I'm MOST happy to find this video. The instruction booklet isn't great for somebody who's always used a radial arm saw and is a tablesaw rookie, but this video cleared up several questions I had. Thanks!

[@christianh2o252]

I love the rack and pinion fence though the plastic gears may not hold up over time and a lot of use. For a DIYer who is looking for accuracy and may only do a few projects a year, I think there is a lot of value in this saw, at the price point. Particularly with the integral stand, which adds $40 - $50 dollars in value vs. a simple aftermarket stand. Take that savings and reinvest it in a higher quality blade, and this could be a really nice saw.

[@edwardpenniman246]

Bought this saw and your video was the best in answering a couple of questions I had in assembling it. Great video.

[@VCGConstruction]

Glad it is helpful Edward.

[@papatrt]

I ordered one based on your and others reviews can't wait I had to downsize my shop temporarily and missed not working my wood projects so I picked this saw up hope it has durabilioty and stays accurate! thnak you!

[@kle2217]

I just bought the Ridgid R4514 online at Direct Tools Factory Outlet for about $349 (listed as “blemished). If I had known about this Skilsaw model at this price point beforehand, I might have considered buying this as it is very compact looking, and don’t have a big work area. Thanks for showing this as an option.

[@khounmy45]

Thank you, alot of KZbinr dont understand the meaning of DIY! Yes it a simple project a 10year old can do but your a professional using professional equipment. I'm not a carpenter so I dont own a table saw so that 10 min 5$ diy video turn into a week project that cost me over 500$ in tool!

[@gregghernandez2714]

I remember watching a guy start using a Ridgid table saw right after unboxing, then complained that it didn't make accurate cuts! Great explanation on how to fine tune the saw before putting it through it's paces.

[@donmunro7568]

Started my own business years back installing hardwood. I bought a skil saw. Junk within a year. Plastic bearing holders melted. Spent a little extra got a dewalt and love it. I have used it almost every day for 12 to 13 years and still beautiful.

[@wacollier]

Thats Skil 12 years ago, they did make cheaper stuff. This is Skil now. Glad we have current reviews instead of old prejudices. I bought this to replace my old Dewalt, got it on sale less than $300. For what I paid, its a solid deal. I apparently got a newer revision, came in a black box, and had some changes, and things like the throat plate were metal, not plastic. So apparently they are continuing to improve the product. That's a good sign.

[@donmunro7568]

@@wacollier My old prejudice Dewalt is still working great.

[@cleverdiy]

Thank you! Great video, clear and easy to follow. I just received this table saw as a birthday gift and from the unboxing to setup, watching the video I'm excited to give mine a try now!

[@jimmyreuben6919]

I just bought one, in new zealand it comes with a 48 tooth blade, lucky me I am yet to test it yet but will put it through its paces this weekend. Very informative thanks.

[@anthonywilders2025]

Orderd my saw on Tuesday and got it today (2 days) just got a chance to put it together but not use it yet, seams to be quality. I was skeptical about buying a new product without many reviews but trusted the skil brand and was happy with with the price. Thanks for the video👍🏻

[@christianh2o252]

Hi Anthony... Let us know what you think of it when you’ve had a chance to put it through it’s paces...

[@rudywilliams6238]

I have a question today my new skil TS6307 saw came to me, I was putting it together well, the little that there is to do, the truth is that it is already ready to use if it is not necessary to make any adjustments, but I have a question, the riving knife in my The saw cannot be removed but watching your video I see that you can remove it all, is that how yours came or did you cut it?

[@VCGConstruction]

You’ll Injure Yourself!

[@sonofsandwiches6892]

Its removable AND adjustable. There are springs which you can access after taking off the throat plate. To the guy below that said removing it is a safety hazard, this is true but for Dado cuts you may need to remove it temporarily. It does have two locking positions.

[@javier-pr3mr]

@@sonofsandwiches6892 actually it has 3 locking positions, the one that goes to the bottom is for when you want to use dado cuts the riving knife doesn't interfere cause as he said is not removable on that specific saw. I have one too.

[@JD-8-1971]

I have used my Skil tools for years I have no complaints at all. Heck even have a few 35 year old Black & Decker tools still going strong.

[@RussThacher]

This is the video I've been waiting for. I've been researching and watching table saw videos for months now trying to figure out what to get and was hoping that you'd drop a video with your opinion. Thanks!

[@cuchanu]

Get the Metabo if it's on sale. Same price, much better saw

[@albertv6054]

I like the fact that it has two latches on both sides of the fence ... does the metabo

[@scsc9311]

I would go for the DeWalt dwe7485. Way better saw and deal. The worm drive version of the Skil saw is way better. It has a nicer stand with really large tires, but at that price range, definitely go for the Dewalt dwe7491rs.

[@livinglifenow1000]

I agree, my next and first saw!

[@number6396]

@@scsc9311 The Dewalt is $250 more than the Skil. In my book that's not the same price range.

[@andrewmiller5145]

Thank you vcg construction that be a nice saw for a homeowner and thank you for showing everyone how to adjust and setup the new saw I never knew how to do it correctly

[@steventoney1741]

Just bought this saw last week. Hadn’t seen this video and didn’t know anything about it. Went to the store planning on buying a different one. Saw this for $30 more ($299.99) and decided to get it. Love it so far. Great for beginners like myself. Easy to use, cuts great. Will upgrade the blade at some point but over it’s well worth investing in.

[@kjk7225]

How is the noise level?

[@steventoney1741]

@@kjk7225 It’s pretty loud I guess. I wear ear protection so it doesn’t bother me. I’ve never had a table saw before so I don’t have anything to compare it to. Still think it’s a great saw!

[@JimmyRay7159]

I love my new skil table saw. Im 6'5 and i heard it was kinda short but honestly it really isn't that bad. If it becomes a problem il build a platform to gain a few inches. Its almost dead on out of the box. You dial 1.5 inches on fence its dead on the money. Its square, level and ready to rock.

[@MikeE-hb8zb]

Enjoyed your vid! No B.S. and no punches pulled! love it!!

[@zzmalone6720]

Nice saw! Just throw on some hearing protection. I used to have a 10” Rigid job site saw, that was nice. Ended up selling it and I picked up the M18 job site. Love that saw. Had to rip some Trex. Worked awesome!

[@richardgray1730]

Milwaukee m18 table saw is a great saw but the blade size is 8-1/4" not 10”. the 8-1/4” blade mades not differants to me for I grow up using my fathers table saw he got in the early 50’s… it had a 8-1/4’” blade on it too

[@skilo81]

Great video! Did you happen to notice if the surface is flat... Saw a review that it was not plumb... And that it sags towards the middle...

[@briangustin3745]

Mine was flat - only thing that sags in middle is the plastic blade insert.. but that's easy to solve by making your own zero clearance insert.

[@joshuahunt633]

I got this just the other day. I immediately put it to work cutting up an old oak table into straps. It was a 1.5 inch thick table 8 ft long and 4 ft wide. This saw made short work of it with a 24 tooth blade. All of the cuts were nice with very little saw marks.

[@frederickburns1739]

I have watched several in depth comparison on the major players in this market. In one comparison against seven other saw the Skill finished first in the power of cutting but overall finished fourth or fifth of the eight saws. And considering Ridge finished last I guess fourth or fifth ain't to bad?! This passed Black Friday I purchased a KOBALT from Lowe's as I was in need of a new saw and theirs was a $100 dollars off retail. The two things I liked about the Skill was the power rating over the BIG NAME'S and the geared fence system. As a retired log home builder the KOBALT saw was the best bang for the buck at $229.99!!! And that's my two cents. :-)

[@free2chasehappy]

The integrated stand is a nice welcome at that price! If it's as reliable as the dewalt saw, skil has a winner!

[@gladiadorpr1356]

Thanks for the video and the information. I will consider this one. I am about to start little cabinets proyecto. Thank you so much! God bless you and your company!!

[@ZachAttackThe]

Thanks! You helped me decide on this saw, and set it up tonight, excited to get using it

[@kjk7225]

Is it as loud as he says?

[@ZachAttackThe]

@@kjk7225 it is loud indeed, however it’s a power tool and that’s something I consider part of the deal.

[@bsanders9106]

Picked this up today at my local BiMart for $275. The included legs makes this thing worth it. Did some test cuts, felt good but this is my first table saw ever. I like how it stores down with all the tools onboard.

[@kjk7225]

Do you think legs will last? Seems lili storing it with legs down like ive seen in pictures and all the plastic in the legs they might breakdown?

[@andrewvaldez1777]

I’m a DIYer and based on advice from Vince I went with the Skil cordless tool line instead of Hercules. Best advice ever. Thanks Vince! I may get this table saw as well, hopefully on a Black Friday deal. I hope Skil gives you a little something for the effort.

[@TheKurtTribute]

Mine showed up last week. Ripped 2x4’s into 1 1/2 x 3/4 pieces, as well as lots of cuts on 3/4” Baltic birch plywood. Worked great. Awesome saw for my needs. Only con, like Vince said, it is really loud.

[@zackjames88]

I've had this saw (Wich I love) a couple months and do not find it loud at all, my Porter Cable was louder

[@TheKurtTribute]

@@zackjames88 To be fair I work in a cabinet shop and am used to three phase saws, the blade spinning is literally louder than the motor on those. I would say this Skil table saw is about as loud as most miter saws I’ve used.

[@rodw]

HI VINCE !!! VERY NICELY DONE SIR !!!! THANKS RODNEY

[@andersonolive4553]

Mine just arrived today, pumped to check it out. My first table saw and I was confident making the purchase thanks to you! I really appreciate your content.

[@dayv2005]

Love the video. Was looking for just this answer. Went to Amazon to see prices and they are 430+ now on there. I feel at that price you are better off getting a dewalt one. I looked other places and they seem to still be selling around 300. Thank you for the content.

[@josephmelcher1312]

Nice job, Skill would not have been my first choice but your demo makes me consider it. I would like to see the Harbor Freight offerings demonstrated just for curiosity's sake.

[@thehelpsmith]

I was looking for a review on this saw and couldn't find one. Thank you Vince! The only reason I haven't updated my old portable table saw is because it's dead quiet, it has an induction motor instead of a noisy universal motor which all the new contractor saws use. Makes a huge difference working inside or near neighbors.

[@Andrew_Sherman]

Gotta admit, this is the best review I have seen so far from this saw. Good job Definitely got me thinking of getting one

[@don-thegeneral5403]

I like the collapsable legs on that. I have the rigid compact table saw with the wheel base but that Skil would be nice to pickup and go

[@yobryan88]

I remember you guys went to a convention and tried the new skill tools and it was impressive from what they were before! Great job guys!

[@fccquoter19]

any comparison between this saw and the ridgid 10" jobsite R4514?

[@terrycampbell1171]

Just bought one yesterday. Will be a massive improvement over my old, cheaper than dirt, job site " toy" table saw. 😂 Looking forward to trying it out.

[@ForTheChristians]

How has it been for you? I just bought one yesterday

[@jamespayne8781]

Went through the process. Ultimately gave away my first saw and bought the Bosch. Now I use the Bosch like a regular shop saw. Plus it also came with a colapsable stand and wheels.

[@408SPLKINGS]

Excellent review, tutorial, demo, clear audio & not condescending 👍

[@drew-rb7fu]

I'm impressed by all the new skil tools I have several and plan on buying this saw

[@wlms04]

I know someone who has a Skil circular saw (not a skilsaw, a Skil brand [same brand as the saw in the video] circular saw), and let me tell you, it is the loudest saw I have ever heard. Ever. Every time it fires up I jump. It is front row at Metallica loud. It’s pretty powerful though!

[@VCGConstruction]

🤣🤣

[@bryanbahling2877]

That saw is fantastic. I purchased this one because of this video.

[@VCGConstruction]

Enjoy it

[@joedechristopher2764]

How useful is the little blade adjustment feature it advertises? I’d love a saw that is easy to keep square to the miter slot and fence.

[@sue5427]

Anyone having trouble installing blade guard. Raise the riving knife to top slot. It's in directions. The drawing doesn't show the knife three slots up. It comes shipped one slot lower than you need it. This video is super great think a few people missed this . It sold me on this saw. Plus my last skil is working great after 15 years but my rip fence failed and parts are no longer available. Seems you need a rip fence to make a rip fence. Plus who doesn't want a new tool after 15 years.

[@RaulGarcia-so7lc]

Thank-you. Very good demonstration. I am in the market to purchase a table saw. I'm impressed.

[@vincentcorpuz1622]

I love it! Bought it at Menards last week for $269 after rebate

[@themeat5053]

Vince, nice review. I've been gone awhile, glad you're not screaming in this one.

[@hohenstaufen.1010]

I bought it and it’s a awesome machine 👍🏻👍🏻 including the skil chopsaw.

[@reaper060670]

Hey bro.. I've been trying to get my hands on one of these bcos for me to buy the DEWALT 7485 here in IRELAND it's costing me nearly 700 euros man.. That's way too expensive when I can get a Cast Iron table saw for 900-1100 euros.. I cannot get my hands on one of these Skil table saws. It's a real beauty. Ur review is the 2nd I have seen now and this saw is the Dogs bollocks as we say here in Dublin, IRE.. Great review man.. Keep up the great work. Always enjoy yr reviews of power tools, especially the newest ones on the market..

[@leokennedy5079]

Awesome video. Thank you! Just assembled my saw. Picked up a few things from you for the assembly. I would call myself a self-taught very accomplished DIYer. Not sure if I'll start with the windows, which need new jambs and sills or my wife's new potting shed. Regardless, I'm looking forward to making my first cuts tomorrow. I agree with the comment below. You should demo every tool on earth!

[@JAMAWALLER]

I'd like to see how easy it is to align the blade to the miter gauge slot. I was looking at the manual and noticed some knobs to micro adjust.

[@joliemoss689]

I got this saw because of your review. It's my first table saw and I love it! I can move it around, and am learning a ton by using it. My one question is about the "Auxiliary fence" The thing that swings over the fence--what does it do? could you demonstrate its use? Incidentally, The one I bought was the last one available within a 50 mile radius. You must be quite an influencer!

[@calcant10]

Just got one too. The auxiliary fence that swings over the rip fence can be used as a work support if you are cutting past the edge of the table. There is more information on it in the owners manual on page 35 and 36 if you want to know exactly, was just reading about it when I was making some adjustments.

[@jimhagler3716]

it's also used for ripping small and thin pieces so you don't put the tall part up against them. makes it easier to see and handel.

[@whatthehellimbored]

I've been using this for a couple weeks after my DeWalt finally died after 12 years...great saw! Accurate and powerful.

[@jamesnm21]

I wish it had a wheeled stand so I didn't have to carry it but looks like a good saw for a decent price. The Dewalts are nice and also pretty loud so not really an issue there.

[@rts3613]

As a remodeling contractor I have a ton of pro grade tools. I settled on Dewalt table saws. It's hard to beat Dewalts rack and pinion fence setup. It's very accurate. The only Skil tool to make the "cut" through the years is a Skilsaw Mag 77. My van was broken into and I had several thousand dollars in tools stolen along with my beloved Dewalt table saw. I'm happy to see that now Skilsaw has a worm drive table saw with the rack and pinion fence, although not this model. It might be the perfect replacement.

[@MinhNguyen-ze7ic]

Thanks as you asked if we have any questions, I would appreciate if you can show how to micro adjustment of the blade parallel to the fence or miter slot. This saw has this feature. Thanks again.

[@Mike.Macmyazka]

Thanks for the video, Vince. Would you still recommend this one a year later (it's $350 in 2022)? I'm in the market for my first table saw and I don't need anything better than this for my purposes, but I am curious about a couple other saws that are in the price range. I've looked at some of the sub-$200 saws (Ryobi, Performax, HF, Craftsman...ones that would've been $100 or less a few years ago) so keeping in the price range ($400 max), I was looking at the following: These are 15A 10" with the exception of one 8-1/4". DeWalt DWE7485WS (8-1/4") $400 Ridgid R4518 (10") $400 Ryobi RTS23 (10") $300

[@sreevatsan]

@Mike I’m going for this SKIL saw for my first table saw as well (found a DEAL at Kent Building Supplies in Canada now for 399 , approx USD 310). I’d pick the SKIL over Ridgid R4514 / R4518 just for its Rack and Pinion fence! But if that’s not an issue for you, then by all means go for the RIDGID as it has the lifetime service agreement and give you the same or better performance.

[@Mike.Macmyazka]

@@sreevatsan I found a deal on the Ridgid 4514 for $215 plus shipping on a refurbished unit. I'm going to try it out and see what I think. If I don't like it, I should be able to sell it for what I paid or slightly more without an issue. If I don't like the Ridgid, I will definitely get the Skil.

[@sreevatsan]

@@Mike.Macmyazka Sounds good! And good luck! I picked up the SKIL and going to open it up this weekend.

[@leftofpunk]

I was looking for options for my very first table saw just the other day and I happened across this same saw and thought it looked like a great option. Didn't want to go super cheap like those Ryobi's or Hercules'. I feel much better about my findings after stumbling upon this video of yours. Also thank you for the calibration lesson. That'll be helpful!

[@bricemayes7566]

I have the ryobi jobsite saw and it is amazing!!! And cheaper than this one

[@fiveohgod]

Tony, the Hercules is a better saw, but it's much like Loutenenant... Dan...he's got no legs.

[@adryangalindo6459]

Im.new to the game and getting serious about my work . Iv restored a jig saw and circular saw by Skil and I'm content and fairly happy with how they preform

[@jjsrt8]

Those built in legs are genius! I've been looking at getting a dewalt. I'm just a home use builder/crafter so this will probably be good for me.

[@jackaffleck427]

Thanks for the demo! Would have liked you to use the miter guage also. Wish me luck. I just placed an order for one. Arrives on Monday the 9th of August.

[@joshwilson2949]

It’s not just the piece will make the machine cost more by making it metal, it’s that process of mass machining and metal pricing. So it will more than double the cost. Plastic is pretty durable and a lot cheaper to replace vs metal. Great review overall.

[@martineastman2003]

I have a built a table to hold a table saw which provides an outfeed area. Can this saw be fastened down to a sheet of 3/4 plywood and or can the legs be removed for that purpose? Thanks, by the way, great video.

[@lcook0825]

Great video and saw looked very easy to use. Really great for a small shop.

[@MartinLuchterhand]

Great review! I just bought and used this saw and love it!

[@VCGConstruction]

Glad you like it!

[@foggyfrogman1]

Been looking for a new budget DIY saw as my next investment. I like my skill circular saw and now this table saw is top of the list. 👍

[@whytwulf3545]

I just bought this saw. So far, loving it. Menard's, if there's one near you, has these for 289 right now on sale.

[@jamespostevka1144]

Just picked mine up, had a $210 rebate check to spend. Great tool!

[@scottmorris4914]

I like the built in stand, the two items I see as an issue is the plastic gears, and the dado width it can handle. The specs say 5/8”, so it cannot handle a dado the width of a 1x board. You would have to do two passes. Most other saws are at least 3/4”, Other than that, the price is great, and it appears stable. I wish the non-cabinet saws were gear driven for setting the angle of the blade instead of moving the tilt by hand.

[@carasmussen27]

seems like way too much plastic. I am still leaning towards DeWalt.

[@MooseDoesStuff]

How was the table for flatness? That's one thing I always hope to see in table saw reviews and almost never do. I've seen comparable table saw tables vary by as much as 1/8", which is more than enough to mess your cuts up on any ripping.

[@NKWoodworks]

This is a jobsite saw. That type of accuracy doesn't really matter for the type of work this saw is intended for.

[@KILLHACAY]

ello greetings from the UK. first off i just want to say im a big fan of ur channel and ur videos defo one of the best channels in the genre of construction n building keep up the great work! so wow! im impressed with this table saw from wat i cud see it is powerful and accuurate to cut a ribbon of oak with no stalling or juddering with relative ease was reqlly impressive! it maybe loud but thats nothing a pair of ear defenders wont solve. so this is a a tool i might consider getting as ive been looking for a portable table saw for a while now and this looks perfect for wat i do. im a carpenter by trade but can and have worked in other trades such as plastering, tiling, plumbing, bricklaying, and minimal electrics. so u cud say im a muliti trader but wat i work as and primarily do is fit or instal plantation shutters the averge jo and general pulic call them blinds but there not exactly blinds same concept and function though. so id like to see how well this saw wud cut a shutter frame which in some cases has a acrilic or lacqour paint finish over mdf probably wud need a fine tooth blade. also some of the reviews u do in the future please include us brits as the power source n output is different and wud like to know if some of these tools are avalible in the UK and EU any who i think ive rambled enough on this comment lol peace love respect n hounar!

[@davidmedina4625]

Thank you, you made my decision. I just went out and bought it. 👍

[@oakwoodmike]

I'd like to see how you rank portable tables saws like you did with the drills and impacts. What's the best for a new comer and pros?????

[@markfernandes2396]

I think you should always use a material support at the end of any table saw and keep a push stick in your pocket, that's just what I think. Also a great blade is always my first choice with any saw. If a saw comes with a blade it is usually low qualify.