I Made Corn Hole Boards for the Arkansas State Police!

[@731Woodworks]

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: 5 Router Accessories Every Woodworker Needs -kzbin.info/www/bejne/b6avamN5bc-NfLM Tools In This Video: Shapeoko 5 Pro CNC - shop.carbide3d.com/731woodworks?redirect=/products/shapeoko5?variant=40249287671869 60 Degree V Bit - amzn.to/3skhTAB 90 Degree V Bit - amzn.to/3OFHSdi Surfacing Bit - amzn.to/3OKGeZx 1/4-inch end mill - shop.carbide3d.com/731woodworks?redirect=/collections/cutters/products/201-25-end-mill-cutter Arkansas State Police Badge Tray - www.731woodworks.com/store/arkansasstatepolicebadgetray Festool Track Saw - amzn.to/3KOL9pg Festool Dust Extractor - amzn.to/45aB12m Festool Sander - amzn.to/3KJM9eo Track Racks on Door - amzn.to/3E4UIwO TSO Track Saw Square - tsoproducts.com/guide-rail-squares/grs-16-pe-parallel-edge-guide-rail-square/?ref=731WOODWORKS Sanding Mouse - amzn.to/3E4MRiy Bench Cookies - amzn.to/3saCSFK Condiment Bottles - amzn.to/3E493cK Oramask - amzn.to/3E2MXax Ol Loggin Epoxy - www.ollogginepoxy.com/shop Table Saw - amzn.to/3QNpz8I Table Saw Blade I Use - amzn.to/3sizwRg Featherboard - amzn.to/44isQzZ Pocket Hole Jig - amzn.to/3sg8070 Forstner Bits I Use - amzn.to/3smHHfu Spray Laquer I Used - amzn.to/3EmA9fv Custom Baggo Bags on Etsy - creatoriq.cc/3OYQI77 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 [phone] Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@Morfoot6]

Thanks for your service brother. 21+ years here and now I’m trying to get into the wood working side as well. My Shapeoko 5 is ordered and I can’t wait to start using it. Beautiful job man!!

[@jeffharden7765]

I had no idea about your background. I follow you and watch and learn from your videos. We’re fellow Christians, so that one’s easy. My mother was a cop and single mother in the 60’s and 70’s. I just want to thank you for your service to everyone. You’re a master craftsman and incredible human being.

[@WalterRiggs]

It’s great to see a project video back on this channel, especially with the problem solving. Well done

[@731Woodworks]

Glad you liked it!

[@quentinbiderman1487]

Man I miss when this channel was just videos like these and not just tool review videos every week

[@FixItFrench]

This is the video that convinced me that I will get a CNC! Such a cool tool

[@jameslambert4487]

This was a great video. I enjoy watching you build things. Great details.

[@greatgrandpaswoodworking]

Again a great project. Beautiful. Great ideas for any local restaurant or bar that offer corn hole games.

[@731Woodworks]

That is a good idea!

[@Original_Old_Farmer]

It seems to me that it might be worthwhile to cut out the star and everything inside the star. Paint the recess blue and put the decal, hopefully white inside and then cover everything, including all the top with epoxy. I think you could find the emblem and run a white transparency off of your computer. Cut the transparency to the outside of the star and then attach to the indented area. Then do a complete cover with epoxy. The blue area need only be thick enough to cover the paint like you would with polyurethane. I would have done it your way, except you showed me that it was not the best way. Good video.

[@ronswoodshack]

They look awesome!! That CNC is freakin cool! Thanks Mighty Matt!

[@paulhopkins1905]

These came out great, something you might consider is using a 2k clear like an automotive clear. Spraymax makes an outstanding one that comes in a rattle can. It will hold up better, and has higher solids so it will fill in those little imperfections better than laquer. The only downside is it takes longer to dry as its a catalyzed finish, and once you pop the can it has a short shelf life

[@bryanmartin8336]

It just made my Sunday morning finding a 731 build video. I know why you mostly do tool videos now, but I don’t even watch those anymore. Your build videos are always an instant like!

[@vernsteinbrecker3759]

Nice job, they look great

[@paulellis84]

I absolutely love watching your build videos. Thanks for the awesome content!

[@731Woodworks]

Glad you like them!

[@garymiller5937]

Nice project Matt. It's also very nice of you to give the anonymous trooper a gift like that. I'm sure he'll enjoy it for years to come. I don't think there's a police man or woman who gets the thanks they deserve. Perhaps you've started a movement. Let's hope so. ❤😊😊

[@731Woodworks]

Thanks 👍

[@robertsmith3518]

Nice corn boards

[@LYTOMIZE_Woodshop]

Great job, Matt - they look awesome! I've made a couple projects to honour a couple officers from my service in the last few months, so I know how appreciated this project will be. It's fun doing stuff like that, eh? 🍁 😂

[@731Woodworks]

It is fun! Thank you 👊

[@timzeller1541]

This came out great! Excellent detail!

[@731Woodworks]

Thanks!

[@dtr2058]

Great build, but a heads up, wood glue doesn't properly bond to painted surfaces. Your joint will be a ton stronger being bonded to raw wood.

[@davidkendrick3158]

So good to see you back in the shop with a build! We miss you showing us regular folks what’s possible in a garage sized shop space…even if you did use a 4 figure machine in your build. They came out great! Thank you for your service to your community and to all of us KZbin viewers!

[@TheArtificiallyIntelligent]

As an Arkansan, with the amount of issues coming out of the Trooper program, it's definitely not a badge of honor.

[@dreamlookautodetailingauto3353]

Blue legs & white trim hole would have really set that off nicely... still looks great though 👍

[@IPING4U]

Warm up your spray paint can in the sun or warm water. It raises the pressure in the can and they spray much better.

[@gtkwatkins]

Completely understand that you were not making "tournament boards" - that said, if you make angle of the legs go beyond 90 degrees you will have less movement out of the boards when used on a hard surface and a more enjoyable play experience. I may have missed it in the video, but you should also run a round over bit around the hole top and bottom.

[@danreger8924]

Very nice!

[@jimfeaster4837]

Nice job enjoy

[@731Woodworks]

Thanks 👍

[@Hoss122]

You are the absolute best! Your love for Christ shines bright! Thank you for your service and your continued support of law enforcement. These boards look amazing! And they play even better than they look 😉

[@731Woodworks]

Thank you Hoss! 👊

[@GrantButler]

The catch-all tray has a #3 in it. What does that mean?

[@731Woodworks]

it's the badge number of the trooper

[@GrantButler]

@@731Woodworks that's cool that he has such a low number

[@731Woodworks]

@GrantButler yeah. It’s a random draw lol. They repurpose badge numbers after someone quits, gets fired, or retires lol. I was 364 lol

[@brentruhlen2039]

Matt, maybe an easier way to make this would have been to paint a base color, get the ASP badge cut out of vinyl, stick it on and then top coat with clear epoxy.

[@TenRooster]

u made my sunday

[@curbshooter]

Love the builds!

[@TravisFrazee-b6h]

i love your videos do you think sometime you could make a video about 5 projects that sell or something

[@731Woodworks]

I've made several of those. Just search 731 Projects that Sell

[@TravisFrazee-b6h]

thanks @@731Woodworks

[@TravisFrazee-b6h]

the latest one was 3 years ago i meant a new one thankyou

[@Mike-ou5ps]

Howdy Mr. 731... Very nice build. I've thought about doing some corn hole boards but then again, I've "thought" about building probably 1000 things, lol. Very good video. Concise and straightforward. I'm curious though....At the end, you show a pic of yourself in uniform. Why is it that Military and Police force pics they have you pose with no smile? Why is that? All pics look like the photographer pissed yall off. The only reason/conclusion I can think of is that "they" want to portray a "Seriousness" to the duty. I can understand that, to a point....But the other side of that coin is that who's going to see those pics besides fellows and family? It's not like the public is going to see them. I dunno. Just curious. Great video Mr. Buttons. Keep them coming. 😊

[@731Woodworks]

lol they don't force the angry face. But at the ASP they took those pictures during troop school. We were a few weeks from graduation but still in the thick of it and wasn't nobody having fun lol. There were a few that smiled. But most don't. I didn't want to be the one cheesing ha. My later ASP pictures, I smile in lol.

[@sonnygouge894]

👀 Is that the new Ridgid D Handle Jig?

[@731Woodworks]

lol Yep it is.

[@sonnygouge894]

@731Woodworks Better than Octane I've heard... can't wait for a video!

[@michaelfairchild]

Beavis and Butthead: Hehe, Cornhole...

[@731Woodworks]

😂

[@iserod2206]

Subscribed ☑️

[@Karen-wu1eh]

Do you need to get permission to create an official design? I know some people have gotten in trouble for copying trademarks!

[@731Woodworks]

🤷🏻‍♂️ I didn’t see any trademarks on the ASP Star. However if I was using a big sports team logo then I’d be cautious about the trademarks.

[@robertlee1977]

Unfortunately, I got to meet one of your Arkansas St. Trooper buddies this spring on the way to the VEX Robotics world championships with my teams. Someone side-swiped us on the interstate. Extremely professional and nice, just not the way I like to meet people.

[@ericpetitclerc5519]

I have to admit that I prefer, by far, your project videos. Thank you for this one! i understand that you get paid a lot more with your sponsored videos where you compare products, and I will not blame you for making money! I will just not watch them. Again, thank you for your great project videos!

[@731Woodworks]

Thanks. Actually very very few of my tool videos are sponsored. 99.9% of them I buy the tools because I am interested in them or I know that the audience is curious about them or would find them interesting.

[@scottcountryman6090]

Another comercial video

[@731Woodworks]

If you're going to throw shade at someone, at least learn how to spell. 🙄