7875 trans am e85

99 trans am, t56, 9 inch, 06 6.0, tick cam, huron speed kit 7875 turbonetics turbo, twin 450 in tanks, bosch 210s, stock ecu, 3bar SD hptuners
750whp 17psi 14deg timing e85

[@nizzy1057]

damn thats a good looking trans am

[@SloppyMechanics]

Epibloger so clean

[@supertunesupertune]

From the first run to the 6th run a hell of a jump! 115hp! Matt, you surprise me all the time with your tuning skills! Great job...

[@andrewdynes5300]

There were probably boost increases in there too

[@PATuners]

guy has a nice trans am

[@3rdGenGuy]

I wanted a 4th gen WS6, but i'd have to smog it so went with a Turd gen

[@Msweet151]

My "turd gen" put down 518 at the tire, naturally aspirated. So it's what you make of what ya got.

[@3rdGenGuy]

Mitch A it's a California 1992 RS I drove in highschool. The turd gen is life

[@GlycerinZ]

I have a '97 WS6 and yeah smogging it has been a pain in my ass. about to head to the emissions center for the 7th time

[@3rdGenGuy]

Glycerin well in 5yrs it will be exempt in most states.

[@BlackRecoil]

@@3rdGenGuy im in ca too but i thought only cars 1974 or older were the only smog exempt cars?

[@TheProchargedmopar]

Now that's badass​!

[@shannonsisk]

I really like the wheel combo even tho they don’t match. I’m not a fan of skinnies up front.

[@SforSytosis]

This car is seriously my goal for my camaro ss... damn...

[@8wireracing694]

06 6.0 is a bloody hummdinger in there.

[@dirtswimmer]

that's a happy fire chicken!

[@zachensley94]

trans am with turbo flutter, now that was sexual

[@raymond80hr]

Good numbers

[@PreetSingh-gp3re]

Wow Beautiful, is it a stock 6.0 with cam? Or anything done to thr bottom end

[@Eastbayrob]

Damn dude you're pumping out so much content lately I'm just waiting for you to start charging a subscription fee 😂

[@MrGuvEuroman]

When ever I hear that name I think of Da Bandit.

[@WeldonAutomotive]

I'm looking to do a on3 kit on my camaro, do you have any suggestions on things to add / change to the kit that you have experienced

[@SloppyMechanics]

I have never used an on3 kit so I can’t say good or bad

[@jamesholland9565]

Man I want one so bad

[@djones102]

Why does it backfire after each pull?

[@D.Magic_]

Goals

[@genemounce8302]

What work has been done to the T56 to handle that?

[@crxman9119]

Was the person in the passenger seat using the headphones to listen for knock?

[@SloppyMechanics]

Nope

[@andymokszycke7570]

is the 14 degrees of timing at peak tq and then you ramp it up more?

[@russellfisher1514]

I'm sure a dumb question but what does SD in the description stand for?

[@mrsmichaelfreburg]

speed density

[@russellfisher1514]

OK here is another one lol by that he means he is using maf? I feel dumb.. I must be

[@mrsmichaelfreburg]

No maf. just the v.e. tables in hp tuners

[@kylejohnson3892]

What heads and intake is on this one. Looking to do one of these but probably with a s480 clone like Matts truck

[@SloppyMechanics]

i believe stock and stock

[@kylejohnson3892]

317s nd truck intake or car

[@TheTurbooneg]

gen3 through a 60e?

[@TheBrokenLife]

It's a stick (from the description).. It also sounded very much like a stick.

[@KevinBigg]

TheTurbooneg t56 6 speed manual

[@TheTurbooneg]

thanks! description wasnt showing for me, i agree it sounds like a stick lol

[@TheBrokenLife]

Yeah,, if your auto sounds like that, you'd better call Carmax. ;)

[@dustinnealy9234]

Going to post the tune?

[@OBSBryce]

Hey matt, anyway you could post this tune to the repository? No manual cars on there now for hp tuners. Plus I have a similar set up. Thank you.

[@SloppyMechanics]

just download the other 210lb injector tune that is already up

[@nickycowboy5020]

How much would a build like this cost on average ball park? Car, mods and typical shop Labour?

[@George37897]

How do the 210s work on the stock ecu, and how is the tuning on them? Currently deciding on injectors for 700 wheel on e85 with room to grow

[@SloppyMechanics]

they work. not much else to say

[@champspec]

Do you know the specs on the cam? Stock 317’s?

[@mrclucker1969]

Was that 'clack' sound a backfire through the blow-off?

[@SloppyMechanics]

Paul Roberts wot shift box

[@jsnyara]

looked like it came out the wastegate dump

[@ivanracing27]

What's fuel injector used on this car

[@codyheiden5053]

What wheels are these?

[@HGHMotorsports]

needs more lope

[@waazpilot7784]

what type bov is he using?

[@jsnyara]

He isn't using one

[@pastaalalamborghini]

you can clearly hear a BOV. You can't really get away with not using a BOV on a manual car either

[@jsnyara]

Why is that, I was thinking about removing mine ( i have the same setup almost exactly as the car in this video)? and it clearly sounds like no BOV since its fluttering back through the turbo.

[@pastaalalamborghini]

The WOT, chop, WOT when shifting a manual car causes pretty violent surge on the turbo with no BOV. Auto car is a different story, no throttle chop shifting. Sounds like a turbo smart BOV at the end of the dyno pull, if you ask me. Maybe there are other BOVs that sounds like that but thats the one I know of that sounds like that. Your car doesn't flutter on below boost shifts like that?

[@GoodSpeed150]

Its an eBay BOV

[@derekr1854]

How much boost? 20lbs my guess

[@Itsme-mx5tl]

last....

[@squidgymop1]

so is this an aluminium or iron block ?

[@GoodSpeed150]

iron 6.0l. LQ4

[@JoeHynes284]

only like one year 5.3 is aluminum I believe, quite rare

[@squidgymop1]

oh ok here is Australia we only got aluminum ls engines

[@pastaalalamborghini]

the motor in the car is a iron 6.0. Aluminum 5.3s were made from 03-12

[@JoeHynes284]

i thought the aluminum was a special order, in other words, not every 5.3 built in those years was aluminum?