Installing Fox Body Mustang front Springs 79-93 www.maximummoto...
Пікірлер: 62
@captainhowdy95576 жыл бұрын
100% bullshit that it’s harder than an original spring . Obviously he’s never done the original spring. I have the same tool there’s no way of getting the jack under neath
@alfrede.neuman86118 жыл бұрын
Curious, can this tool be used in the reverse order to remove the spring as well? Every "demonstration" video I'm seeing with this tool only shows installation.....never removal?
@mikemarks18344 жыл бұрын
This video looks like it’s from 1970
@nedaCFilms12 жыл бұрын
@jpadilla05 79-93, 94-98 and 99-04 have the same McPherson style suspension setup and same chassis platform... Basically the SN95 and New-Edge models are still on the Fox-Body chassis and parts are interchangeable and process is the same.
@walbertomartinez695110 жыл бұрын
Omg!!! I'm having so much trouble putting back my damn spring! I need this tool!!!
@captain75774713 жыл бұрын
After seeing this I went to H.D and got a 3//16 x 1 1/2 piece of steel bar and made one.It works great.! Total cost $7.99. and about 1 hrs work. Tools req'd vise,10lb sledge hacksaw,10in mill file. and drill. If you would lke to know how I did this e-mail me and i'll give you specifics.
@cburford27307 жыл бұрын
captain757747 got the specs for it? I've made one currently, but wanting to know your specs
@captainhowdy95576 жыл бұрын
captain757747 I paid 19.99 and I have the computer designed component , that you can trust if you don’t have the tools you have . I would make it myself also if I had a spot welder . I get what your saying
@markdsatterfield47126 жыл бұрын
I would love to have the details on how you made this captain..
@yoelb1311 жыл бұрын
Dude, this has got to be the best spring install video in the whole KZbin world....cause I did some searching, and this video was helpful, unlike others; especially in learning how to use the MM tool.
@chuy65413 жыл бұрын
hello friend as it is called the tool used to install the spring, or is it custom made
@captain75774713 жыл бұрын
Man I wish I could have seen thie video about a week ago. I recently changed the front lower control arm bushings on a 97 mustang. I sure would like to meet the dim wit engineer ( graduated last in her class) that placed the front bolt of the arm in such a position that you have to drop the rack and pinion to get it out. The rear bolt only comes out after you remove a body bolt. (It's the easy one.) Ford ,glad to see you'r hiring the future's DIMMEST STARS. Horse but award to you.111
@rd2fst11 жыл бұрын
Whats the easiest way to do a front 5 lug conversion on an 83 mustang? Also, when takin the front springs out will they shoot out even if the front end is jacked up?
@curth609411 жыл бұрын
where did you get that spacer between the spindle and shock? thats what i need for my stang, i just put hardened washers in there
@DWBmotorsports13 жыл бұрын
will this work with factory springs? im trying to install oem coils in my 93 fox and i cannot get them in for the life of me
@residentkiller1911 жыл бұрын
Can I use that tool on a 1999 Chevy van? Where can I get it and what is it called. Thanks
@HOGSIDESJTV14BOSSHOGRECORDS12 жыл бұрын
What about takin the spring out ?
@JeromeB198513 жыл бұрын
can you take MMT-8 out and use it on the other side? or does it stay in for good?
@DWBmotorsports12 жыл бұрын
have you used it before on factory lenght springs? just for future reference...
@Digital_Gangster14 жыл бұрын
Wow! I never knew about this! The parts house compressors I could never get to fit right. I'm buying one of these! Thanks!
@Kevins93cobra12 жыл бұрын
Nice video man. I've spent tons of money with MM recently, and am literally about to install springs tonight. Sure wish I would have known about this tool ahead of time. If I ever help a friend do springs, I'll be ordering that for sure.
@rfrances9214 жыл бұрын
wat is the part called
@ANULife12 жыл бұрын
what is the name of this tool?????
@sub0ca14 жыл бұрын
Thanks for posting this!! I bought one and it worked out perfect!!!!!!!!! Thx again!
@claytonbranch12739 жыл бұрын
the factory spring is a lot tougher to install. and also why would you ever lower one of there I am trashing the Eiback springs and had a set of custom factory made. I had coil spring specialties make a awesome set way better than Eibach.
@mechanicmoore8 жыл бұрын
I Hear Ya Big Money! It's what the guy wanted!
@jpadilla0514 жыл бұрын
this works on 99-04? stangs
@london33199 жыл бұрын
very helpful tool also works with other cars with similar lower control arms. Installed 650lbs springs under 70 Chevelle very safe and super quick!
@331LX8 жыл бұрын
What are the little spacers you put in when bolting up the spindles to the new strut? Thanks
@pedrorios348 жыл бұрын
thanks man love this tool. ..+++++++++
@javiermiranda6439 жыл бұрын
Can someone let me know if that tool stays in there after the spring is installed or does it come out some how?
@london33199 жыл бұрын
Javier Miranda No you loosen the nut and pull it back thru the bottom of the control arm.
@javiermiranda6439 жыл бұрын
Thanks for the reply Alex, it was actually really easy on my new edge to put lowering springs I didn't even use this tool lol, wasn't in stock arrived like 2 weeks later ha
@captainhowdy95576 жыл бұрын
Javier Miranda It comes out moron
@78jiver3 жыл бұрын
@@captainhowdy9557 not everyone is a mechanic, no need to be an ass.
@21mejia2512 жыл бұрын
nice! i'll be doing the same thing soon!
@LuisCastro-mr1qf7 жыл бұрын
is mms the only store i can purchase this item from?
@pedrorios348 жыл бұрын
thanks man love this tool. ..+++++++++
@bigcee196810 жыл бұрын
Dude, you put the spring in upside down. I hope you caught that and fixed it.
@ljshoreslokal10 жыл бұрын
Cliff Rogers He put the spring in correctly. There is a notch in the spring cup that the end of the coil spring rests in.
@mechanicmoore12 жыл бұрын
Yep...lol, glad it helped ya man!
@stereomaster423112 жыл бұрын
Are you from the South?
@mechanicmoore14 жыл бұрын
@sub0ca No problem...
@codywilson73108 жыл бұрын
man this video is awesome them springs are hell to put in I'm also doing a5 lug conversion
@dntlss9 жыл бұрын
Awesome video man and great tool,i have a 91 gt and im almost positive this wont work with stock springs being that they are much longer that lowering ones plus ive tried the jack trick and its just not doable but for a guy thats lowering his car the tool will be invaluable plus you explain everything really detailed,thanks again!!!
@mechanicmoore8 жыл бұрын
I have used it to pit stock springs in with no problems. I take the strut out of the top. It will raise the car up a little but it will work. Or it has worked for me every time.
@sheehy93312 жыл бұрын
I'm ordering mine NOW !
@svt_guido8 жыл бұрын
the only way I was able to get the springs in on the front of my 1998 was without the isolators... but I can hear the springs making noise...
@mechanicmoore8 жыл бұрын
You will hear metal on metal without them. Put them in and it will go away.
@johndeloach5032 жыл бұрын
can I get this tool from the parts store or do I need to order from Amazon
@mechanicmoore12 жыл бұрын
yes it will.
@Jonboatjax11 жыл бұрын
Great job dude post more
@mechanicmoore12 жыл бұрын
Good deal.
@shitbagjay788 жыл бұрын
or you could rent a spring compressor
@mechanicmoore8 жыл бұрын
Good Luck with that scooter! Please post a video of it...lol