The Best BMW N52 Mods!

[@justinsvlogs1701]

Thank you for doing this . Especially in 2023

[@8020Media]

Justin - Thanks for the feedback! We hope it helped.

[@CrankshaftsMotors]

True

[@Wooster_]

yes exactly!!!!!

[@emilioestevez3469]

You broke my heart when you said to look elsewhere if you’re looking for more serious power gains 😂😂😂😂😂. I can be tough once you have a lot of passion for certain engines

[@8020Media]

E - It's either that or fork out a ton of money, unfortunately.

[@GoodTofuFriday]

Great info. Was looming go the the n54 intake manifold mod but since my car is jsut a daily i think ill do the 330i instead. Ive watched a few vids now and you are clearly knowledgable, thats a subscribe.

[@8020Media]

G - Thanks for the feedback! Glad we could help.

[@natking1u1z99]

Yeah the low end torque trade off isn't worth it imo and most e90 n52's have pretty impressive low end torque.

[@bmw-130i]

great video ,thanks for the N52 love!! 😃

[@8020Media]

BMW - Thanks for the feedback! Trying to get to all of the BMW engines eventually.

[@mightycheese2389]

Really really great and detailed video! I appreciate you taking the time to put this together for us!

[@8020Media]

Mighty - Thanks for the feedback. We hope it helps!

[@OscarMackan]

thank you for this !pleasr make more e90/n52 videos please! u earned mt sub

[@8020Media]

O - Thanks for the feedback!

[@ripppking]

great video and wished these videos existed years ago when i had bought my e90, not too much info was out there was people were just trading them in for upgrades, turns out these engines are one of the most reliable engines i can think of and fairly easy to work with no experience given BMW reputation, took me awhile to find out the tuning and mods are extremely limited for n52 models especially for the minimal gains achieved when you look at money you pay to gains ratio, but in the long wrong these things are the tacomas of the sedan world and go to my grave stating that, so investing money in good parts and maintenance will be really rewarding with a fun & amazing daily driver, some things Ive learned and want to point out over the years there's two variants of the n52 engine, one being from the UK and the other being the US domestic models, the UK models have a different engine cover (grey) and came with a much bigger air intake compared to the US e90 models which i believe were produced in mexico, grabbing an OEM original air intake on eBay from overseas is your best first upgrade to get that simple mod knocked out the way, aFe also makes aftermarket intakes but from my research, its hard to justify paying the bit of extra money for minimnal gains on an aFe air intake , over what BMW engineers had intended for their cars, although an OEM air intake can cost around $300 even less, its alot for minimal gains so going with an aFe aftermarket 3 stage inake is justifiable due to availability , cylinder air filters are what originally came with 328 models but were downgraded for the US e90 models with charcoal flat air filters, a common mod is doing a charcoal delete to increase airflow if you rather not upgrade the air intake (the charcoal filter for smog and cleaner air airntake reasons i believe so heads heads up on your state policies) just helps the engine breathe better, there is also an upgraded aftermarket clamp on silicone hose, that can be purchased on ebay for about $30 which connects to the air intake and improves airflow over the stock plastic OEM tubing which i believe the aftermarket hose just has better aerodynamics with the way its shaped, the upgraded air intake and mentioned silicone hose take more or less 20minutes to swap out and should be done together IMO, super easy also a begginer suggested part upgrade you could do in less than 5 minutes with the upgrades above is a minor upgrade which is heavily debated, is the e90 aftermarket front grill air scoops, for as long as i can remember there has been mumerous claims, that they are worthless "ricer" upgrades and others claiming they do help with aerodynamics depending on your ride trip, there was a poster who dyno'd his e90 and posted the results being no different than having them off, but the counter argument there is i remember reading, you need to be cruising at high speeds to receive high air flow thru the grill intakes which makes sense, when crusing highways at higher than usually city speeds completely make sense to me vs a stationaired dyno test with no cool air flow being pushed thru the grill, i have not heard much updates on effectiveness of these air scoops which only are a few bucks so that debate is still "up in the air" (no pun intended) considering the test anyalsis for something so more minor on 20+ year old cars right now seem rather "pointless" as it stands, but personally i believe they work for long drives & touring which this car is amazing and kinf od built for in general. if you chose to hold off on the mentioned above upgrades/mods i would HIGHLY suggest high performance spark plugs and metal ignition coils as your first official maintenance and upgrade tune, for around $150 you can grab metal ignition coils, the plastic Bosch ones (oem) are okay, and get the job done i guess, but it would only make sense to get the better high performance metal coils with how much fun youll be reving the engine, blew out my fair share of plastic oem coils revving it pretty good just having fun as a daily which i believe the engine can endure alot more stress when having fun revving it but the plastic coils are just notorious for giving under that amount of stress (depending if you drive it hard or not, which i honestly do) as for spark plugs i prefer NGK iridium but honestly up to your choose personally after you finish the some of the easiest bolt on upgrades/mods that take no less than an hour all combined i think it would be wise to invest into some quality wheels which will without a doubt change ride quality depending on your setup and of course your model, being AWD/RWD the stock BMW tires are pretty trash due to being run flats which i guess serve there purpose for what they are but a new set of tires and even rim size will drastically change how the car drives and turns alone, i went with wider/bigger tires on my AWD and mpg slightly went up due to less time to travel, buy being wider had more friction on the road, and being wider the turning wasnt as sharp but man can i blast thru corners... the correct wheel setup can change alot of factors specially when you start setting up suspension kits down the line after all that i would then start to focus on the bolt ons mentioned in the video from the exact order, 3 stage manifold then headers and either an exhaust or suspension upgrades cause these seem to be where this is majority of investment for parts comes in compared, to other parts after all that theres really not much you can mod/upgrade outside of proper maintenance , and this is where i would start messing with ECU tunes because then you can get the full power from all the upgrades that have been added with some tuning, the reason you wait for this being a final step is because not many people know or mention the ecu will tune itself over time, minimally when you've added aftermarket/upgraded parts the more you drive your system pulls the data and statistics and the ecu will slowly adjusted itself but yeah youll still want to send it in for proper tuning to match your setup somewhere along the lines of your project you'll want to grab a throttle mod chip this will help with giving instance throttle response when pushing the pedal for extra fun and performance really unlocking the cars potential from manufacture down tuning ( even base model bmws have tons of power they just dont want anybody I.E. elderly clientele to go full petal to the metal so theyre down tuned from the factory before reaching consumers.. lame but understandable considering the targeted clientele for bmw love to beat and drive the hell out of the latest models before upgrading) but a chip can also help with lead foots putting it into Eco mode also a $80 hood sway bar is worth the money for what you pay, another simple bolt on, also a m series steering wheel upgrade can greatly change the quality of life and drive of the car cause after all its what youre using ever time you drive, which is a worth wild upgrade down the line cant really think of much performance wise, after that its kind of just cosmetic upgrades, even even upgrading seating and the infotainment systems, body kits and headlights are also popular, though some people really do prefer trying to stick to OEM if anyone can mention other upgrades mods or cosmetic features feel free to let me know as this is just what i can think of at the top of my head thru the years i know alot of the n52 crowd gets tons of slack from n54 fanboys but the reality is the n52 is a much better reliable daily driver and lots of fun, with the car market heading the way it is i believe these will be more sought out for just on the engines alone if you want a super reliable cross country touring car with comfort and a good aspirated sound, i personally do not see any other perfect daily driver besides maybe a porshe vr6 955 that offers the same comfort durability and reliability. defintely not the most luxurious, fastest or prestigious cars but theyre built to last when taken care of. the n54 is a fine car just too sporty for a daily unless you have the pocketbooks but even then more prone to maintenance issues. these cars are just a great all around sport sedan with good specs and fun to drive to its limits without fear or something breaking at the end of the day

[@8020Media]

R - Thanks for taking the time to write this in-depth comment! This will certainly help future viewers.

[@Cyphuer]

Why does nobody talk about the fact that a 328i SULEV does not need the intake manifold upgrade because it already has it and just needs the 330i tune? If your bmw is a SULEV its goof if it's a ULEV then no, and you will need the intake mani upgrade.

[@8020Media]

C - Thanks for the insight.

[@alimehrozi2828]

What oil do you like to use? My car is stock i have a z4 sdrive30i

[@oliverrice8869]

I just picked up my N52 powered 130i, that i intend to build into a cheap and fun track day car.. so this video is great! Thanks

[@8020Media]

O - Thanks for the feedback! Glad it was helpful.

[@Xtremebotz007]

N51 models already has 3 stage manifold and thats good to go with tuning.

[@8020Media]

X - Thanks for the insight.

[@Lolfungreg]

I saw someone else commented, but yea, you missed out on mentioning MILVS, modified supports for the valvetronic system that allow a little bit more aggressive timing using the stock cams, give about 10whp with a tune. Otherwise very nice quality video!

[@8020Media]

L - Yes, we acknowledge it, but we want to keep it simple for this video.

[@BrandonBreeden-iq4rx]

The supports are slightly thicker in gauge more lift more power right it requires a simple tune to the valvetronic system to sync the one mm difference in size could ride like ass without one tho 10+ish plus hp gain from them alone easy instal during a valve cover gasket change tho if you are handy with using a screwdriver improperly is what Im understanding from watching install from other vid but it is kinda sketchy looking loll

[@e28forever30]

@@BrandonBreeden-iq4rx Take a deep breath… Ever heard of interpunction?

[@natking1u1z99]

@@e28forever30 lmao

[@Smartrior]

Thank you very much from Ukraine! :) Here we love Classic BMWs! (even tho most people just ride around on F series)

[@8020Media]

Smart - Thanks for the feedback! We personally have 5 BMW's, so we love them as well!

[@0megalul309]

3sim/N54 + MilV + headers + Charcoal filter removal

[@8020Media]

O - Thanks for the insight.

[@traviswhite771]

Greatly appriciated foe this video mate 🍻

[@8020Media]

T - Thanks for the feedback! We hope it helps.

[@Vodafone16v]

Eyy! Great video here with excellent info! Don't forget about the X3's with the N52 and N52n engines. Would be of great value some more info on those regarding compatibility of the intakes and if the headers would be the same to the sedans, or if they will be X platform (E83) specifics. Cheers!

[@8020Media]

Voda - Thanks for the feedback! We'll certainly take it into account.

[@vineshsingh6010]

Thank you and well done.

[@8020Media]

V - Thanks for the feedback! We hope it helps.

[@joe-rc4ps]

Will installing headers cause the check engine light to come on? If so how do you remove it.

[@8020Media]

J - Depends on the type of headers, but more than likely yes. You could always tune it out.

[@robertpiccininni9208]

Hi. I'm in Northern NJ. Where is a good place to take my BMW 528i for performance upgrades??

[@danieldiettmann8190]

Me a previous e92 335 owner am looking forward to making a slightly more powerful modern e36 sedan m3 outta this 325 n52 just gifted to me. It’ll be a suitable cheapish replacement for my beloved e36 when all is said and done I imagine

[@8020Media]

D - Sounds nice! Keep us updated with the build.

[@UbiDivision]

After installing the DISA on a 128i do you need to tune it. Also will the manifold off the 335 fit the 128?

[@UbiDivision]

Great video btw

[@lucadevoti6955]

Anyone knows if there are some models with idraulic steering other than the 130i ???

[@loneokami6560]

The 125i/128i have it too

[@lucadevoti6955]

@@loneokami6560 thank you very much!!

[@jeremiaharchuleta9559]

Can you do these on n51 sulev?

[@8020Media]

J - We will put it on the planner.

[@2A_TJ]

Will I see similar numbers with the n51 engine?

[@8020Media]

2 - You should!

[@KpDKGaming]

Thank you so much for this video incredibly informative, love your channel!

[@8020Media]

K - Thanks for the feedback man. We hope you find everything helpful.

[@clydestrong2913]

Great vid!

[@8020Media]

C - Thanks for the feedback! We hope it was helpful.

[@rezas6786]

All of this is for a E82. You reckon subfram inserts and bushings would be great? And what would you recommend between a 135i back box or a valve rear section whilst keeping the oem cats

[@stevenrivera4712]

you do that job I need it for my car

[@8020Media]

Steven - Not too sure what you mean by this.

[@natking1u1z99]

The N52's high torque @ stock is impressive IMO. When I first bought mines I had to be easy with the gas pedal while turning corners because the RW would spin and I would unintentionally drift a bit. I ran the VIN a while back and the specs said I had the N52 engine with 230HP vs the 215 most people have so i guess I lucked up. As for mods the car came with an AFE cold air intake and the sport suspension system so the car is lower than most stock e90's. I would get pretty good sounds coming from the engine, you could hear the air being sucked in and people thought I actually had something nice under the hood....Nope!😂

[@8020Media]

N - Haha! Thanks for sharing your experience.

[@ripppking]

yeah man the engines on these things actually sound damn good even just for being stock they got that nice aspirated sound that you just dont really here no more, the power on them is jusut enough to have fun in the cities revving high enough to let the engine rip without completely hitting top speeds, they really remind me of the 2000s m3s that are now classics, them being not complete power houses but just build perfect where you can let the engine breathe and wind with high rpms and not having to worry about picking up too much speed, literally funnest cars to be driving outside of sports cars, and for the n52 to be the last naturally aspirated engine from bmw just makes it that much sweeter, a good intake, exaust headers and manifold are keys to letting them sing

[@zayupnext4634]

I have a 2007 BMW 328I Coupe, what price range should I be looking for on the headers, 3-stage manifold, and tune for the manifold

[@8020Media]

Prices can vary significantly on some upgrades, especially headers. The 3-stage intake manifold should be right around $500, another $600-800 will get you a solid set of headers (though, they can get up to $1,500+ depending on brand), and about $400-500 for a tune. Ultimately, about $1,500-1,700 should get you a quality setup with all three of these N52 mods. If you go to a shop for install then I'd factor in another ~$500-700 in labor costs.

[@garrettstiles7808]

Add another ~$700 for new DISA valves. They’re ticking time bombs if you reuse the ones you get on a used 3Stage intake manifold, and cheaper to do before the install. Just beware: I did this same set of upgrades on my ‘07 328i and it all ended up a good grand or two beyond what everyone said it would all cost. Build some realistic cushion into your expectations.

[@ripppking]

@@garrettstiles7808 can you recommend quality disa valves proven? no trying to take a ebayers word for "working" when for all i know they just took it from a junkyard or some other means. would just rather have new parts

[@garrettstiles7808]

@ because I didn’t want to pull the manifold to get to the bottom one again I just went OEM. ~$700 unfortunately (which is insane) but I wasn’t willing to roll the dice. I also just had the top end rebuilt for like $4k and wasn’t willing to risk tiny rubber and plastic bits going into a half-new engine. From everything I’ve seen there are no consistently reliable ones other than OEM. You either go: 1) new OEM (reliable but stupidly expensive) 2) used OEM (reliable and cheap but unknown how much life is left in them) 3) roll the dice on cheap chinesium ones, a third of which won’t last 5,000 miles and another third of which won’t last 20,000 miles. If you have the free time to do the manifold yourself and do it again, and it’s not your only car, and you’re willing to risk plastic/rubber bits going into the motor (think you’ll need a rebuild soon anyway), then I’d roll the dice on a set of off-brand ones.

[@rezas6786]

You think M3 arms in the front would be good for a E82 125i what’s your thoughts on this?

[@8020Media]

I run the M3 control arms on my E90 335i and it was an excellent upgrade. If you're looking for suspension upgrades it's definitely one I'd recommend. However, if you're on older, worn shocks & springs then it may be better to address that first.

[@Disassociatd]

@@8020Mediareally are the best with help and info🙏🏽

[@ripppking]

yes theyre similar in price and buillt with better aluminal if i recall just overall better for hardly a price difference

[@ArticulateArena]

cool video. how much power can the engine take from tuning and other mods before anything else needs to change?

[@8020Media]

A - Near the end, we discuss mods for over 300whp. What kind of power are you going for?

[@dabzik6521]

what about sulev n51, it comes with 3 stage manifold from factory, so does it mean its just detunned ? because it makes 230 horsepower, what difference between 328i sulev and 330. just ecu detuned?

[@8020Media]

N51 has a lower compression ratio which is a big reason but it is also tuned different to meet the SULEV requirements. Manifolds are the same but the DISA systems are a little different.

[@rezas6786]

i wanna keep oem cats on the 125i would the magna flow exhaust keep it or get rid of it and if so what are the alternatives ?

[@8020Media]

E - you will want to look for catback exhaust systems then you won't mess with the OEM cats.

[@Kitbh314]

Hi. I have Bmw e88 3.0 petrol n52 and I’m confused about to upgrade 3.23 diff to 3.73 . Is there any straight swap I can do . I would appreciate for help

[@cxt7181]

What would you say that the 245whp power figure you mentioned translates to in terms of power to the crank?

[@8020Media]

C - Hard to say directly, we only care about whp. But if we had to guess, around 280

[@LuffyPhobic]

I wanted to ask you about this so i have 330i n52b30 engine and turbos of n54 can i install and run these turbos without any problems

[@8020Media]

T - I mean I guess you can, but it sure won't be cheap..

[@Fafayega]

Will the Disa intake fit and work on a 323i aswel?

[@rezas6786]

You reckon I can fit a carbon fibre air intake n54 on a N52

[@8020Media]

E - Carbon fiber isn't a different size, just material. So, it should still fit, yes.

[@rezas6786]

@@8020Media what exhaust system or pipes should I do to it I was thinking about a straight pipe a high cat pipe or a full on exhaust system I already have a resonator delete a 135i muffler and the butterfly valve disconnected what should I do

[@8020Media]

E - We have a ton of written content on the N52 on our website: bmwtuning.co/bmw-n52-engine/

[@ripppking]

a carbon fiber air intake is just cosmetic man, hope you didnt actually buy it unless youre trying to make your engine bay look good but imo waste of money if not your intended goal, doesnt save weight as the original uk variants just came with plastic and a cylonne air filter, upgrading to a k&n should be your priority

[@72911RS]

or add lightness. :)

[@8020Media]

7 - We're revamping our setup in the near future. Thanks for the feedback.

[@72911RS]

@@8020Media It was on old line from my 911 days. In the early '70s the Porsche .racing guys went to extremes to reduce weight in the track cars. Thanks for the cool vids. I'm trying to decide on a 135 or 128 for track days

[@8020Media]

7 - Completely misunderstood what you meant by this lol. We thought you meant lighting on the video. Yes, you are correct, but could be costly for small weight reduction. Thanks for the feedback and sharing your insights!

[@skip2681]

So question I have a f10 528i n52 is the e9x n52 the same engine? Meaning I can buy parts for thag engine and they will fit on mine ?

[@8020Media]

Yes they should be the same for most engine related OEM parts but modifications might be different for certain parts just since the different body design and engine - so make sure you check fitment or check with the company specifically.

[@bmw130i_]

Should I turbo my 2005 130i e87 N52 🤔🤔 producing 267bhp atm

[@8020Media]

B - Depends on your budget.

[@sneaksxx7163]

well its expensive and the n52 is not really made for high boost. but 320 hp are sure if you gonna turbo it

[@bmw130i_]

@@8020Media not really got a budget tbh haha

[@8020Media]

B - If you're looking for a ton of power, we'd get a newer B48 or B58.

[@ripppking]

no not worth it and the magnesium aluminum block is just not made for it, thats why the n54 is the predecessor, albiet a little less reliable but can endure more of that power and stress, n52 turbo is still doable jsut wouldnt recommend since you can do much better things with the engine in general, even just swap it over to another luxury car with a blown engine

[@atomicdetailsoc]

how do i know what n52 i have? its a 2007 525i. i added a sport mode mod button which stiffens up the steering and higher rpms before shifting but not sure if it actually increases horsepower....

[@8020Media]

C - Your best bet would be to plug your vin into a vin decoder and it may tell you.

[@Bimmer-Fonz]

Only reason to move on from n52 is if ur not going FI. These motors want boost so bad

[@8020Media]

E - Well said.

[@HorizonD2]

Wait so I have a 2012 e90 328i coupe soulev. I heard I don’t need to swap out to the 3 state intake. Just the tune?

[@8020Media]

B - You don't have to. We make these mod videos for good power while still maintaining reliability.

[@plexusgamer1105]

Hello Zach would you recommend performance mods for N52 328 xdrive?

[@8020Media]

If you're looking for that extra bit of power then I'd absolutely recommend performance upgrades for the 328i xDrive. Even just the 3 stage intake manifold and a tune will make a big difference. You could go further and do all the mods I discussed in the video. However, as I mentioned towards the end, I wouldn't go chasing huge power gains with the N52 and you may be better off focusing on other mods like suspension, control arms, etc. I'd personally do a tune, intake manifold, & coilovers to start. Then in the future maybe circle back around to a couple other mods like headers and some additional suspension refreshes/upgrades.

[@Hero_nooob]

Do I need a tune for headers ?

[@8020Media]

H - You don't NEED a tune for headers, no.

[@jaymilo8425]

My guy that wall is filthy, thought it was my phone but nope😅

[@8020Media]

J - Lol. It was in our garage, but we have since moved our setup XD

[@raxor5359]

What can i do with n52b30 190kw F10 2011 for more power?

[@8020Media]

R - Watch the video.

[@iaintcatchingnoell]

Can I put a B30 3 stage manifold from a 330i on my N52B25 2.5L 218HP (325i) ?

[@8020Media]

I believe the N52B25 already has a 3-stage DISA manifold. However, I'm less familiar with the euro spec 2.5L engines so you may want to double check and confirm that is the case.

[@iaintcatchingnoell]

@@8020Media sadly you’re rigt

[@Vgk36]

Why are the headers so pricey ??? My e36 headers were cheap in comparison.😳

[@8020Media]

Vgk - Most likely because of the sophistication of them.

[@ripppking]

custom made by garages i believe, only so much of a deman for specific headers on a car, ive actually been told to look into chinese headers which is actually insane to put chinese performance parts on a bmw but truth is chinese manufacturing has actually high tech machinery is you know how to source from sellers and factories, the m5 was built in china which is by far the worst bmw made in reliability so if im being honest buying Chinese headers from a reputable factory directly would be viable with their updated tech machinery. this is off topic but years ago ive seen machines "3D" print with metals that im not sure human engineers can come close to creating, worst case scenario you get cheap headers best case scenario you get really good headers for a fraction of the price, also tons of high tech Chinese scan tools for the automotive industry is being made by factories in china that would otherwise cost thousands of dollars, when it comes to china sure they might have tons of cheap labor and manufacturing but if you tap in with the right agents and factories you can basically buy directly from what most other companies are just sourcing their stuff from

[@pignapoke6772]

The N51 is three stage - does it use diss?

[@8020Media]

P - Not sure we understand.

[@stevet8607]

Yes to answer your question

[@Johnsbrggnfndm]

I know it kinda goes hand in hand with modifying cars, but does doing these compromise the reliability?

[@8020Media]

Nuts - Yes. It depends what mods you opt for. An intercooler makes the vehicle more efficient and so can a tune. Once you start pushing more boost, it naturally becomes less reliable.

[@ripppking]

in theory yess but not really, these engines are one of bmws most reliable and solid, seems the other reply was reffering to boost and turbos? which just isnt recommended for the n52 and thats why we have the n54

[@BMWEiMSport]

Depending on region the 25i/28i models already have the 3-stage intake manifold as standard. Mine came with it from factory.

[@8020Media]

Are you in Europe? I believe a lot of the international models got it but unfortunately none in the US did.

[@BMWEiMSport]

@@8020Media Yes. The Netherlands.

[@8020Media]

BMW - That would make sense why you go it from the factory. Nice!

[@johnnyloveee]

Yeah, in the US the SULEV models got it. Mine has that manifold from factory and I’m curious how much I can get out if without compromising reliability

[@kontext4277]

I have seen 323i with the n52 3 stage intake manifold

[@joehernandez6260]

Swap out to a LSX it’s that simple

[@8020Media]

J - What..?

[@rezas6786]

I was thinking of doing a 130i tune on the 125i e82 what other mods do you think i should get to support the N52 engine thats gonna run a 130i tune or is it just these mods that youve listed that would help it ( asking if theres anytthing else to get )

[@8020Media]

E - The mods we've listed. No different across models since it has the same engine.

[@alwayslearningthefacts5881]

Thanks how about the Milv`s

[@8020Media]

A - Thanks for the feedback! The what?

[@garrettstiles7808]

Bingo. MILVs are the only proven N52 mod outright omitted in this vid

[@brianscott217]

My N52 530xi has 255 stock

[@8020Media]

B - Then you have more potential.

[@brianscott217]

@@8020Media yeah it has 3 stage intake factory it needs header. and IDK if they are a tune for it. I put sport mode on it myself and that Titans the steering column changes the transmission and I can't find if it gives me more HP seems like it but could be the way it changes the transmission. It has factory air box with k&n filter.

[@quillyum]

275hp isn't crazy for an N52 Lil bro, the X3 3.0si does 272hp stock

[@8020Media]

Q - Thanks for the insight

[@E90gangNm]

🔥🔥🔥🔥🔥

[@8020Media]

E90 - Thanks for the feedback!

[@Elbmwenthusiast]

Well, that’s 275 that’s normal throw a turbo or supercharger on it and that shit will be reliable still you won’t blow up the motor unless you’re dumb you don’t know what you’re doing. Could explain why a lot of people say you go n54. Although At max you will probably get up to 500 to 600 to the wheel. On stock internals.

[@8020Media]

E - What you're saying is not cheap.. Also, most people don't have the knowledge to do so.

[@bussheadchoppa7184]

I’m getting code p0015 on my bmw 2011 528i

[@8020Media]

The VANOS solenoids and cam position sensors are two likely culprits of P0015 on the N52. Have you tried cleaning or replacing anything yet? I'd start with cleaning the VANOS solenoids to see if that gets rid of the code. Otherwise, cam position sensors have become more and more common issues as these engines continue aging.

[@bussheadchoppa7184]

@@8020Media it was coming up for exhaust and I change it

[@bussheadchoppa7184]

@@8020Media I change the vanos solenoid

[@bussheadchoppa7184]

@@8020Media and when I’m at a stop light I feel the car idle a little bit ruff but no code for that my car got 143k miles

[@8020Media]

Buss - did you change the cam position sensor?

[@mojoofficial3395]

just buy an n54

[@8020Media]

M - Both are solid.

[@spudmckenzie4959]

That's a bit disappointing. I was hoping for camshaft mods, changing rod lengths, stuff like that.

[@8020Media]

Spud - We can certainly look at doing this in the future. This is a simple mod list. Cams are certainly more complex.

[@spicysnowman8886]

You're better off talking to a racing engine builder at that point.

[@ericroper5124]

Get milvs it’s worth it

[@garrettstiles7808]

This list + MILVs. Beyond that, you’re into one-off territory and well past the cost-benefit ratio of the N52 platform.

[@2A_TJ]

@@garrettstiles7808with all these mods plus MILVs…do you think it’s possible to crack 300hp on a 328i???