81 F100 Build All New Brake System + MLS Strikes Again!!

[@sandgroper4044]

Number one channel on KZbin in my opinion.keep up the good work Chad and look after your knee mate

[@ThisNThatGarage]

👍

[@abelardocastillo6683]

I have 83 Ford f100 ,no rust at all. 302. Enjoy watchingur show it makes my day. It's more like a rusty bullet.

[@paulwaffler8208]

Best show of the week love my Wednesday night backyard butchery

[@walterrobbins4470]

The copper crush washer trick. Tighten it down. Smack the bolt with a hammer and then tighten it down again

[@leighfleming2075]

Thank you for sharing. In some ways I think it is mls that makes your videos so entertaining, I do feel bad that it strikes so much . Keep up the great work

[@johnruppe1699]

Looking good Chad; doing a 302 swap on my ranger I had to gently massage that firewall with the hand sledge for the headers to fit. No big deal, just a little tappie tappy.

[@mackdog3270]

Yeah, we seem to be a hostel for every feral cat in the county. It's a pretty rough life if you're a wild cat. Years ago I had a terrible mouse problem so a friend of mine gave me one of his barn cats. This little maniac was half the size of a normal cat, but he had the rage of a tiger. I brought him into my garage and he got into the wall through a hole and spent three days in there growling and plotting my murder. He calmed down after a while and it only took him three days to get all of the mice. LoL those mice didn't have any fear. One walked right in front of the cat when he was laying in the sun and wack. He didn't even get up. Great little guy.

[@ron19199]

Mr. Chad another good one I do enjoy watching you working on the old ford keep up the good work

[@robertbennett9243]

Like they say " If it wasn't for bad luck, I wouldn't have any luck". You will get there. So much fun watching you every week. Merry Christmas!

[@DarkFlamage]

Pat Travers said that in a song!

[@traviswilliams4308]

Look forward to your video's every week. Keep them coming

[@stevelangston2359]

Enjoy the build and looking to see this on the road

[@Eric-n3q]

Hi Chad great job on the old Ford .Good to hear that you have one of your cats back safe I'm a plumber by trade and the quality control gremlins hit us to . keep up the great work and videos😊

[@jerrymurphy6673]

You still doing good keep it up thank you

[@larrypaulsr.5346]

Kooll N video adventure.

[@charlieburton5479]

Hello Chad from Alabama, enjoy the Wednesday videos. Keep going brother!

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤

[@TheCrackerBox]

Thanks for another , Brother !

[@OldChevy79]

This is backyard butchery at your finest Luv it

[@dannybenfield1164]

I can't wait for the next video and hope to see the truck on the road

[@LarryCruson-wf8pu]

We got faith in you I've seen you do wonders , don't know how you fixed that Kubota tractor that had all the wires burned up but you did great video Chad we will be watching!!!!

[@mrV8manifold]

Looking forward to ThisNThat and a few other things. Let’s go! 🇺🇸👍

[@michealcollier]

You’re doing a fine job. I’m from South Webster, Ohio.

[@jonathanmiddleton1141]

Awesome video Chad!! Hopefully they’ll plan ball with you!!!

[@dalehartley-vd9qo]

Great job Chad the truck coming right along awesome video like always

[@stevehurley5408]

Oh my brother, hopefully we will get to see those burnouts soon. God bless you and Merry Christmas! Love watching your videos!

[@AndrewHCann]

Excellent Video Chad :), did super job fixing up this truck and going be awesome to drive!

[@chrisknauss6727]

Great video, friend.

[@johnbrooks9107]

Yous an amazing man. Blessings from Clyde Texas🙄

[@SamDancing-s2p]

Watching from Texas

[@glentucker4250]

I’ve owned a few Ford trucks in my day. The 79 was definitely my favorite. Just really liked the looks of it. But I had a 81 bull nose, 300 straight 6 With a manual 4 speed. LOVED that truck. Unfortunately the Minnesota winters claimed her. Ran awesome and drove awesome, but the wiring and the body just became too much. I grew up with GM and yes, they are so much easier to work on. Ford did not make their parts to interchange. GM did. Thank you so much Mr Chad. Can’t wait to see this ol’ truck back on the road. And as always, God bless. 🙂

[@7477corvettes]

Keep at it, it'll get done eventually. 😊

[@walterrobbins4470]

The pocket knife I carry is a Gerber dime. I found it in a van I bought some years ago and it’s super handy.

[@theodoredugranrut8201]

Central California watching

[@RobertChryssikos-m5r]

Hello chad the truck is looking good keep it up and be safe intill next week bu bu bu

[@JAKEHEBERT-gx2uz]

Chad sorry to see all the issues you are having with this truck but you are steadfast in getting it done my hat off to you

[@ThisNThatGarage]

👍

[@dalemiller3774]

I would have to say you handle m.l.s in a good manner. Marry Christmas Brother 🎅🎄

[@ericfallis6202]

Hello Hello good to see you 😊

[@Ben-rj7xs]

You should do an old Maverick with a 390 or a Pinto with a 302. I would also like to see a Vega with stroker or a Monza with a stroker. I love the channel Thanks for making these videos for us. I hope you find all your cats ok. "God Bless"

[@DependableAutoTruck]

build a frame work on the top of your lift to support a I beam and mount winch to i beam to pull motors let it extend off the front 4 feet so you can pick up and lower engines to the floor

[@hankroberts-mi3yd]

Thanks sir for showing that even brand new stuff is messed up or wrong... also you are not dumb or Stupid. Cut yourself a break. Now and then. strive for excellence not PERFECTION. . as ALAN KUWICKI said !!! I really enjoy your videos. You're the best one going!!!! FORDS WHY????? IS HILARIOUS. I LOVE Old Fords...but believe me.. I see your point. Keep up the good work sir.. !!!! Appreciate ya !!

[@daleh645]

Merry Christmas!

[@BrentDuncan-t4s]

Great video. Chad!!

[@DaleWesley-d7i]

😉😉😉😉 song when the levee breaks.

[@shawnCurtis90]

It’s go time for the silver bullet again heck yea

[@GeekGinger]

I don't like things in my pockets either. I've gone to a mini folding utility knife. It's small and takes zero skill to keep it sharp 😂

[@phillipvanblaricom8151]

Thank you I've been waiting lol

[@danielstrachan8988]

Yup,I had the same problem on my Ford what I did was to talk weld the head to the fire wall, problem solved 😁😁👍👍

[@sascontracting8749]

Your the man another awesome video can’t wait for the burnouts

[@jasonarmstrong1078]

Best show out

[@ThisNThatGarage]

Preshate it! 👍

[@richardclemens6038]

Hey them pocket knives I call them the handy dandy all-purpose tool

[@justs-28445]

Finally the WAIT AND ANTICIPATION,,, is over!!! Another video!! Oh boy!! 🙏🙏❤️❤️🙏🙏

[@JeffreyParker-b3d]

I hope your knee feels better

[@billbudd99]

One thing for sure Chad, You say Welcome to my MLS world, kinda just like the rest of us . 😂 I drop so many wrenches, & lose so many universal wrenches. That’s why I buy Chinese at the HF store . I don’t feel so bad now. Rant over! Take care of them knees o’buddy ! 🙏

[@jamesmcdonald5868]

I am liking I have been subscribed for several years And this is my comment.

[@Castrucksandtractors]

Chad I enjoy your videos and I'd be fine with a 2hr video every week. My uncle bought an 1981 ford pickup brand new 6cyl automatic and the next day he bought a brand new ste of crager SSs and didnt have time to get them put on he left for basic training for the Marines when finally came home on leave to get his truck and take it back to his first duty station when he went to get his new rims put on that's when he found out his was the small bolt pattern not the big one like every other ford truck he had had he was disappointed. We started restoring his when did the first video on ole bullitt and I bought him a set of Cragar SSs to put on it and he gave me the set that were still in the box and put them on my 66 ford pickup which I bought from him in 81 at 9yrs old

[@inked4life309]

Another awesome video

[@ThisNThatGarage]

👍

[@bryantidwell]

Hey Chad you should try those SOS soap pads and see if they would clean the brown rust off of the paint on that truck

[@corydriver7634]

MLS will get you every time. I hope that stuff isn’t contagious. 😬

[@transcanada9028]

50:06 Hey Chad the second time you filed the hole to fit over the dowel pin I think you filed the wrong hole. You filed the right hole the first time.

[@walterrobbins4470]

The nut and bolt problem with the master cylinder is intentional. Ford wanted to make sure you had to make friends with someone to hold the wrench for you.

[@The-Deadbolt-Deputy]

Glad you got one of your cats back. Last week I had to say goodbye to my cat of 15 years. He was indoor / outdoor and the coolest cat I ever had I miss that fellar.

[@ThisNThatGarage]

Sorry to hear that. I've got one that's 19 and I ain't looking forward to that day!

[@geoffreymills9932]

Another fine product from the aftermarket 😢😢, but the motor looks killer 😊

[@brentunderwood7600]

good video! enjoying this bullnose build!!and thats weird the master cylinder bolts was nuts and bolts i have never seen that my 85 f150 just has studs thats very odd.

[@deadon4847]

Standard brakes, the vacuum booster for power brakes has 4 studs.

[@matthewfort3740]

Chad looks for a shorty header like the fox body cars used. Plenty of manufacturers make them for the 302 , 351w

[@LeonardMagnusson]

here in west port wa. state we had one hell of a storm. i mean one hell of a storm. if it makes it to you sorry.

[@shawnlowell4522]

Unreal how bad quality control is now a days ...BUT I look forward to hearing an seeing the ole stroker get on next week bud!! 👍

[@fordnut4914]

Winds blowing 984 mph.😂😂

[@ThisNThatGarage]

Pretty windy!

[@justs-28445]

The moment you said GOOTEN-TIGHT,,, an old joke popped into my brain 😂😂😂😂 that's as far as I can say. Oh, what might get your cats back,, is to hang a TUNA,, up high on a pole out in the yard,,, and the smell might draw them home 😮 but that also might bring in more than you want 😮😂😂😂TOO! every cat in the neighborhood, raccoons, buzzards , well you get the idea. 😮 I'm PRAYING THEY COME BACK FOR YOU,, I'M A CAT PERSON TOO,, HOPEFULLY THEY WILL FIND THERE WAY HOME SOON!! IT'S NICE TO HAVE A LITTLE FUZZY CAT TO KEEP YOU COMPANY! 🙏🙏🙏❤️

[@joeedwards922]

Chad, please video the window replacement for your thisnthatgarageextry channel. Still loving all your content.

[@ThisNThatGarage]

Too late!

[@klapaucius77]

I had a flex hose with bad threads from the manufacturer, I fought it longer than I should have before I got another one.

[@ericfallis6202]

That's all I will put in is brass freeze plugs they don't rust out

[@Bigwill1969]

Ford didn't weld nuts on the inside because vacuum assisted brakes were an option instead of a factory standard equipment. The booster has studs on the back that goes through the fire wall.

[@ThisNThatGarage]

Not a good reason at all!!

[@Bigwill1969]

@ThisNThatGarage I mean, I can't say I disagree with you on that.

[@dannysettles5646]

I cut everything from saw dust to rail road iron with my pocket knife lol😂😅

[@ThisNThatGarage]

Mine will cut diamonds!

[@walterrobbins4470]

I used to know of a company where you could get a used bridge crane but the guy retired and the company went away.

[@ericlester5890]

Stock fox body mustang headers i bet work perfect

[@ericfallis6202]

Cut a piece of pipe for the spacer

[@bigsteven1984]

Yee haw!

[@SandraOrminski]

thats quite a kick in the head with that stupid convertor. been there done that many times.almost there though. to bad there wasnt a 4 or 5 speed kickin around thats tons of dollars. youll get it.hope it sets sail before long.hope you dont forget that parachute!

[@Mingocountyroadrunner]

👍👍👍👍👍

[@kennethnesmith4936]

Chad don't blow drum brakes, clean with brake clean. That old brake dust will kill you. Be safe.

[@roberthocking9138]

Frustrating , ford master cylinder bolts, enough to frustrate a saint 😁, nice job, some progress and a lot of fun for us 👍

[@82randyacman]

Do you need a set of valve cover I have a set for 5.0 will the work

[@KennyMarsee]

I wouldn’t put Quaker-state in a blown up lawnmower, think they made it from candle wax ,bar soap and large chunks of used fifth wheel grease!

[@82randyacman]

Hey Mr chad

[@stevenmcdaniel-b7g]

I can just about disassemble my entire engine on my Toyota 4 runner with a 10, 12 and 14 MM socket , on a Ford you need all the sockets you own to change the alternator

[@hankroberts-mi3yd]

Please don't call yourself stupid

[@OldChevy79]

If it was a chevy , it would have been done this week guaranteed

[@ThisNThatGarage]

Parts are definitely easier to get for a chevy!

[@johnverdin6600]

What happen to your other channel you had ???????????

[@Moondog7974]

Chad maybe you bought that the wrong caliper and that’s why the GVW and the pads don’t match if you have the bigger calipers your gonna need the bigger pads just a thought

[@JHACbiz]

I enjoy the Ford build not because I like Ford but it's just not done much amongst the KZbinrs.

[@tedhague3814]

Mr.Chad you need about 5 more hands.

[@ThisNThatGarage]

At least!

[@timothyrondo5808]

quality parts👎 enjoyed the video 👍

[@tedhague3814]

Mr.Chad I feel your pain drum brakes are the worst thing ever.

[@ThisNThatGarage]

Hate em!

[@ricardopino4857]

Nice Junk 🙀🐧🐧🐧🙀

[@BrentDuncan-t4s]

Believe on the Lord Jesus Christ and thou shalt be saved.

[@terrystines2536]

Amen I agree 100‰ !!!!

[@noahingram8052]

Agreed

[@tedhague3814]

Because Ford.

[@timrohan5407]

Why you doing all this to a pos truck Brother?

[@ThisNThatGarage]

You must be new around here. If fancy high dollar build is what you're after then you're in the wrong place. 👍🏻

[@justs-28445]

You need watch out what your saying about china,,, THEY GONNA SUE YOU FOR BEING HONEST AND PUTTING DOWN THEY'RE JUNK😮😮😮😂😂😂 BYE

[@DarkFlamage]

Yes, Do take care, Mr Chad....cuz if you bad mouth Chineseium stuff, I imagine they might turn their "Top Secret" Long Range Invisible MLS Pulse Cannon at your shop & give you a few blasts! [Think about it! It could explain alot!] All joking aside. I wish I could handle set backs as well as you do.