940nm infrared LEDs are virtually invisible to the naked eye. 850nm LED produces a visible red glow but will illuminate stronger than a 940nm LED of equal power.
Пікірлер: 73
@billybutcher99125 жыл бұрын
This answered my question about "visible" IR light. Thanks for posting..!!
@wibble19994 жыл бұрын
fantastic. Massively helpful. thank you my friend
@mickcarson85044 жыл бұрын
The 940nm has a more evenly distributed light and yes, it is also brighter than the 850nm. I think you should check your video and see which is brighter. I would rather have the 940nm IR in my cameras than the 850nm to keep them away and hidden from preying night owls (vandals, intruders). The 940nm doesn't attract flying insects than the 850nm which pull insects towards the camera like magnets, resulting in constant fake alarm and sleepless nights.
@cahoc992 жыл бұрын
hi what kind of camera to see vision night ??
@closed-channel9 ай бұрын
Yes same what camera are you using? Mine almost doesn't pick up the 940nm
@koningklootzak77887 ай бұрын
Incorrect. 850nm is brighter.
@diodedoode7 ай бұрын
Hello, @cahoc99. A night vision camera has no infrared filter inside the camera lens, whereas normal cameras like on an iPhone has a filter so the image looks the same as the naked eye.
@lifewithbreion13924 жыл бұрын
Great vid... needed it, thanks
@mikeshipley6158 Жыл бұрын
Thank you. Your video is very informative. I'm definitely buying a 940nm based on your video.
@engjds3 ай бұрын
Err....he told you the 850nm is brighter, just the camera adjusted exposure!
@pbcb5616 жыл бұрын
That answered my question "what's the difference between 850nm v 940nm?". Thanks!
@Heywoodthepeckerwood3 жыл бұрын
About 90nm
@litterlyanything79152 жыл бұрын
this video was very helpful thanks
@androidera18587 жыл бұрын
thank you.
@GoWokeGoBroke20232 жыл бұрын
Excellent review
@hamitinan64222 жыл бұрын
so so so thanks great. it worked for me a lot
@ludr22255 жыл бұрын
where did you buy that 940 led?
@samsen2015 жыл бұрын
Good comparison. A question. Can you condense the beam of these chips, using a lens?
@usbtower43585 жыл бұрын
Yes, it could be done
@alhwaity23 жыл бұрын
Thank you
@jpdesroc Жыл бұрын
What is the part number of your 940nm flood bulb ? 120vac uses ? And who sells it ? Thanks !
@kasperasperdgb27235 жыл бұрын
can you please make demonstration with 730 nm or 740nm? thanks
@sergiosecreto3189 Жыл бұрын
hello what is the camera modell you tested them? I think it also depends a lot on the camera. or am I wrong? I have already seen cameras that could see perfectly the 940 too but of course for the human eyes it was invisible.
@vexelite773 жыл бұрын
I appreciate the video
@fernandocalabro862 жыл бұрын
Good evening. Sorry for the inconvenience. I ask you a question. I need a powerful infrared led system so that when placing it next to a written plate, and I need that when someone takes a photo (during the day) of that plate, the photo appears "burned" or at least it is not understood what it has written. Is there any led with which I can achieve that? What do you recommend? The important thing is the clarification that is that it has to work also during the day (not only at night). Thank you very much and sorry for the inconvenience.
@hamitinan64222 жыл бұрын
Light the plate with and shoot a film on the plate. The IR lights from the cameras will be stuck in the filter and will be invisible ;)
@matthewlewis-zw3tf6 ай бұрын
All depends on your digital sensor, what wavelength you need.
@mostafakabbaa90814 жыл бұрын
Dear If you made a 3000nm camera, could it penetrate the dirt
@federiko83977 жыл бұрын
Hi USBTower, Thank you very much for this video. I tryed to build a infrared camera and I bought a 940nm 18 led board but I can't see nothing with my camera, phone or webcam. In your video the bulb works very well and you have a "white" contrast, not Violet or blue. Please can you help me for to buy your bulb? Thanks
@usbtower54997 жыл бұрын
Sorry for the delay answering. When your camera is in the night vision mode, you should not see any color. The fact that you mention blue or violet, tells me that your camera is probubly in the day time mode with IR filter on, so the problem might not be with your illumination but rather with the camera.
@digibluh6 жыл бұрын
they probably have an IR Filter so you would see nothing.....
@Steve-Cross11 ай бұрын
The advantage of a 940nm IR, is that it is less visible to the naked eye. This makes it much better, especially if you need to be covert. Night Hunting etc.
@260719905 жыл бұрын
Hello, can you tell me please what flashlight do you use in the video and from where can i buy one ?
@usbtower43585 жыл бұрын
There was no flashlight. The bulbs you see are all that has been used. They are available on eBay
@260719905 жыл бұрын
@@usbtower4358 ok ☺ in this case what flashlight with 940 nm bulb you reccommend?
@260719905 жыл бұрын
ok ☺ in this case what flashlight with 940 nm bulb you recommend?
@engjds3 ай бұрын
What is the power of those torches?
@Manosspan17 жыл бұрын
Hello, I have tried using 20pcs of 940nm led's but there are lighting only for 1-3 meters. do you know why? how many amps and voltage do they need? thank you
@usbtower54997 жыл бұрын
There are many different 940nm LEDs available out there. They all have different specs. All LEDs (light emitting diodes) work on constant current rather than on constant voltage, usually you would use an appropriate constant current power supply. Unless you already familiar with the issue, you may want to Google it.
@Manosspan17 жыл бұрын
Thank you very much for your reply. I used a ac to dc power supply like this one www.ubbcentral.com/store/item/img-large/eu-9v-ac-dc-power-supply-adaptor-plug-pack-for-super-nintendo-snes-console-new_221797783699.jpg What characteristics should I look , in order to find 940 leds like these in the video
@usbtower54997 жыл бұрын
What you see in the video is a bulb, that is a complete system LEDs, power supply, heat-sink and it can be used in most light fixtures that use standard e26/27 light bulb. We sell them on eBay, Amazon and our website. Unfortunately instructions on putting one together involves more than a few lines of text.
@Ibanez74005 жыл бұрын
If you look up tactical flash light. You will notice you can increase the intensity by using magnifying lenses to zoom or widen the the range. However this also depends on your power output. If rated you may be able to change your circuit parallel vrs series to increase the intensity of the LED you are using.
@CoolShot9066 жыл бұрын
May I know the camera you use.. And if I use 50 940nm ir led,how much voltage and amp I need?thanks
@tocadisco41666 жыл бұрын
Ir LEds typically have a forward voltage of 1.5V, so if you want to use 50 of them connected in series, ou simply need to multiply 1.5V x 50 leds = 75 volts. The current will depend on the type of led. Small 5mm leds will require about 25mA. Instead of using theses 5mm leds, I recommend you to test some larger 3W power leds. Each one will require 700mA and 1.5 volt to work.
@CoolShot9066 жыл бұрын
Toca Disco well,thanks!
@usbtower43586 жыл бұрын
I would add that the LEDs require constant current rather than constant voltage power and if you are experimenting with a regular constant voltage power supply, I would connect a small resistor in series.
@usbtower43586 жыл бұрын
The camera is a generic Chinese Cam from eBay. The stamp on it reads NETWORK CAMERA Model No NC223W-IR
@miguelangelsimonfernandez54984 жыл бұрын
@@usbtower4358 Actually they don't . They are more efficient in pulse mode and a higher voltage than nominal DC voltage. You would need a pulsing (forward ) current at a frequency higher than your camera shutter frequency. Using direct DC depletes your batteries fast.
@STAY-GOLD-VINYL6 жыл бұрын
Is it possible to make this portable?? Can u give me a run down on how I could make this portable?
@usbtower43586 жыл бұрын
These bulbs can be made to work with a DC power source. It would however require a different internal power supply. Doing it would require professional skills though. If you really need one I could make one for you, if you look me up on our website or e bay.
@imadjawad44087 ай бұрын
Great thanks
@pablowin075 жыл бұрын
Which is better OSRAM OSLON - INFRARED 860nm OR INFRARED 940nm for one bisor ATN ???
@drefhill4 ай бұрын
They are different, it depend what you want to do with them.
@Subgunman2 жыл бұрын
The military uses the 920 to 940 nm illuminators since it provides better lighting and it won't give your position away to those using conventional optics searching for that telltale pink glow from the 840 equipment.
@brokenpencil572 жыл бұрын
Beware if the IR light frequency (850 or 940nm) doesn't match your camera sensor frequency you will have much less intensity (half??) resulting in significant loss of range.
@sergiosecreto3189 Жыл бұрын
so yes exactly, that's what I have written too. the big question is the sensor of the camera. but I also think it is very diffocult so decide cause only later and via testing you can see the result
@closed-channel9 ай бұрын
@@sergiosecreto3189An idea of which camera to use for the 940nm
@hippopotamusanonymous1580 Жыл бұрын
Where can I buy these bulbs?
@radharamanan50036 жыл бұрын
nice
@Fortun.a_Major4 жыл бұрын
940 is good for invisible spy cam
@tocadisco41666 жыл бұрын
The led was 3w or 5w? How many leds?
@usbtower43586 жыл бұрын
The LEDs are 3w and there were 3 of them. Both 940 and 850 nm
@SodiumSyndicate Жыл бұрын
IR is used for stealth. It makes ZERO sense to use 850nm as it glows really well to be spotted easily.
@artur49455 жыл бұрын
esto es una de las caracteristicas que no explican en las camaras de vigilanci que deberian de decir y no dicen
@prajapatbecharbhai18433 жыл бұрын
Good
@wtfvids34725 жыл бұрын
That is strange, humans are not supposed to see 850nm in fact anything over 760... Do you know why this light can be seen?
@usbtower43585 жыл бұрын
If it only produced 850 we would in fact not be able to see it, but no LED is perfect, and alongside 850 it emits some light in the visible range. The 940 LEDs produce light mostly in the 940 nm range and a lot less visible light, if you load them to capacity, or overload them they too will produce some visible light, a lot less than the 850s though.
@5thDragonDreamCaster5 жыл бұрын
The boundary between red and infrared is not a sharp cut-off. Red slowly fades into infrared as the eye's response drops off. From 700-800nm there is a transition zone called far-red which is somewhat visible, but takes on the properties the near-infrared. With your own eyes, you can see black fabrics change to red, while any black marker writing or black plastic stays black. kzbin.info/www/bejne/iKHYfoOCfc5_qpY
@Fortun.a_Major4 жыл бұрын
940 nm , no glow is good then..
@RynaxAlien6 жыл бұрын
With A7S or X27 you wouldn't need even IR lighting.
@StamZO6 жыл бұрын
who else was expecting a ghost?
@ZOMBIEEZ4 жыл бұрын
u
@NK-yx7zn3 ай бұрын
So is it a myth that we can’t see above 800nm lights ?