88- 97 Nissan D21 Belt replacement

Nissan D21 fan belt replacement
Power Steering
Alternator
AC
All auto parts seen are from NAPA
www.napaonline...
Follow me on Instagram
www.instagram....
Leave a like if this video helped you out much Love

[@onlinebills9169]

"I didnt find a video on this online, so Im going to make one for you".... This is love! Thank you for taking the time creating and uploading it.

[@pedrorodrigueziii4859]

I started hearing a squeak from my A/C belt on my 86 that would go away if I turned my A/C off. I bought the belt, but I think I'm going to take your advice and replace both belts and the pulley just to be safe. Thanks for the video. I know it was a while ago but you're still helping people years later!

[@curtfox91]

No problem Thank you

[@YoungEne114]

Mine happen when I turn the truck on it was squeak and then when the truck would move it was continue to squeak I would have to rev the truck for the squeaking to go away yfm

[@EyeSizzurp]

@@YoungEne114ever figure out which belt it was? My brothers truck is having that exactly same problem right now

[@tolearnandteach2595]

i watched this video twice and had no problems installing based off his instructions, you the man

[@shadencrin]

I really appreciate you doing this. Had to replace the belt on my 91 and this was a life saver

[@Skinny859]

I cannot thank you enough for your videos!!! You have saved me SOOO much money by teaching me how to make repairs myself.

[@Poopoopeeepeee417]

Many thanks for the walkthrough. Bought my 93 4x4 recently and believe that I have figured out why I don’t have ac. There’s no belt and that’s probably because the tensioner is just missing. I appreciate your videos and detail and look forward to more content

[@mattosterman7430]

Fantastic! Showed me just what I needed, saved a lot of time - thanks!

[@brentonwheeler3147]

This video helped me change my alt belt in 2 hours yesterday. Saved me time and money, thanks a lot.

[@RR-yg4hb]

Thank you for the video. I love the way you made the sounds to describe the noise- made laughed so much.

[@billrose5146]

From your video, I was able to see how to tighten the A/C belt and stop the dying pig squeal. Thanks!

[@cryptexawm3285]

Thank you for adding the comment about the pulley. My 94 hardbody started squealing like a pig and it was horrendous

[@peterpanpixyland]

Awesome thanks! Happy to hear you DON'T have to take off the fan! Because the only other video I found showed the guy had taken out both the fan AND the radiator!

[@revengefrommars]

Yeah, the Haynes manual I have says to take off the fan, and to do that, take off the radiator. Good to see that's BS.

[@JACk79457]

Thank you so much. Everything is so up to date and with my old vehicle that’s a decade older than I am tends to not have many videos on it

[@daveywarrior1]

Thanks man for the video. Helped me change out the Alternator belt for my 97 nissan pickup, the belt snapped while going 60 mph down the highway, thankfully had someone following behind me that ended up towing me back home. Usually carry a spare in the glovebox but I took it out cause I took it in to get the clutch fixed.

[@ItsMeScareCro]

MANY THANKS for this. Knocked out my belts in no time at all.

[@curtfox91]

ScareCro 🤘 YES

[@mendivilmarisa]

Thanks a Bunch, This Video Was the Saving Grace to helping me change these out on my own!

[@curtfox91]

Glad to help 🤝

[@thewhoacat3690]

Even though I have a 280zx this helped me as a noobie identify the tensioners and understand what im lookng at so thanks!

[@MaryDuran-c3d]

Thank you so much for taking the time and doing this video it was very helpful and awesome just what I needed on my truck and I got it done I like how you explained it was easy to do. Thx 😊

[@prdgnonr]

Thanks for the video. Getting ready to put new belts on my '88 Nissan. Broke this morning on the way t work this morning.

[@curtfox91]

prdgnonr Dang No Beuno

[@JosephDR]

Your video was very helpful. Thank you so much! 1993 Hardbody King Cab

[@RNTV15]

You kinda sound like Kendrick Lamar. Thx for the vid🤘🏻

[@mxcollin95]

This was definitely helpful! Thanks for posting man. 🤙

[@curtfox91]

You’re welcome.

[@majesticquartz]

Thanks for the quality video man, helped me get the belts fully sorted on my one :-)

[@JonathanGomez-kx6xh]

Thank you for sharing great explanation, i’d too searched on internet and KZbin but there’s not enough videos made for D21 how to fix this belts so I just subscribe to your channel for more videos stay safe during this tough times ✌🏼.

[@curtfox91]

Thanks alot and I know we need more D21 stuff so many people have these Great Trucks love Mine im sure you Love yours aswell. Thanks for the Sub if you have Questions feel free to Reach out

[@JonathanGomez-kx6xh]

@@curtfox91 will do thank you again ✌🏼

[@jasoncoppola8613]

Really helpful info. Thanks man. It help me out with replacing my belts.

[@ausencioduranjr2959]

Thanks for the info on the video it help on my 97 D21 👍🍺

[@jrock-xs9vp]

Love the cussing thanks for your video .

[@matthewdickerson8772]

thanks bro just what i was looking to see excellent

[@jrock-xs9vp]

Excellent video very helpful I appreciate it

[@manny2562]

Found this after I did mine on a 98. All same set up. Alternator was a nightmare! But thank you so much for this video, the clearest instructions!! The pulley you replaced, was that the lower one or upper one? After I changed my belts my truck won’t stop squealing. It’s the reason why I changed the belts but now it seems to be a pulley because my truck won’t stop squealing now. At first it only happened at start up and then went away. Thank you and appreciate the video!!

[@curtfox91]

The Pulley I replaced was the bottom one closer to the driver side. It’s the AC pulley still no squeaks til this day for me. You have to make sure your tightening that tensioner if the belts are to loose they will make noise.

[@manny2562]

Awesome thank you for the information!! Much appreciated!!

[@brayamcatalan4317]

Great video brother. Helps a lot

[@curtfox91]

Thanks alot

[@kiisu74]

Thanks, you’re a good man!

[@robertcollins4849]

Excellent video thank you for the details.

[@archangeloftampa7]

Wow, thanks Man!

[@weekendhomeprojects]

Autozone told me I need a 15360 belt. I see you got a 15355. I read on a forum the 15355 is the right belt. Did you run into that?

[@stephonscott-cooper734]

Hey, man this video really helped me the last belt on this video is the one I changed but I’m still having an issue my belt must be too tight I broke 3 of them.

[@curtfox91]

Sorry to Hear that Playa. I dont see how it could brake maybe it is to tight.if you change it again id take it slow and maybe replace a pulley if you have to. Tighten it a little turn the truck on let it run if it sequels try to tighten it a little more until it stops thats when you know your good.

[@rodneywilliams8007]

Great job this vid was very helpful! I have that annoying sound as well, which pulley did you replace, the A/C Pulley or the bottom tension pulley?

[@JuanGonzalez-tt7hq]

Tanks for the video

[@LawnJohnSilver]

I left a like and subscribe on the screeching sound alone, because my truck is doing the same exact thing and it’s really really annoying!

[@curtfox91]

Swap out the Pulleys and Belts. Thank you for the Like and Sub

[@LawnJohnSilver]

Curtis Fox91 no prob, they just put all new belts on, not sure if they came loose after , was like a month ago , but it’s like screech when startup until the engine levels out, then screech when putting ac on, no screech if in gear being parked, soon as you hit the gas screech, then goes off after about 10mph , it’s a nightmare, would u guess it’s the pulleys or belts needing adjustments or both

[@curtfox91]

@@LawnJohnSilver i would believe the Belt is not tight enough or the Bearing in the AC pulley is bad.

[@Xbrayan777X]

Thanks man

[@truthis9340]

if your still having trouble try gates belts

[@4rubios]

Thanks for posting this video! I have a question how will I know how to tight the belts should be? I just replaced them and it saeals when I start it. Someone told me they may be too tight...

[@curtfox91]

You should tighten them to were your experiencing a small amount of play on the belt. Tight but not over tight to were the belt cannot move at all.

[@MarkWalkerMusic]

D21 Reprazent! Great comprehensive vid. 👍 And my label is prepared to offer you a 6-album deal based on the strength of your Napa Theme Song demo.

[@DylanO0505]

Thank you got it

[@roselinolivar7702]

Thanks for the video 👍

[@423alonso]

Thank you for the video brother after watching it i got my answer this pieces of crap trucks are the must horrible garbage to work on so getting rid of this garbage buying me a Tacoma thank you again....

[@curtfox91]

423alonso nothing like a Tacoma also nothing like a Hardbody! Keep truckin

[@trels203]

Dope video man.

[@Curtfoxgaming91]

Thanks

[@rogerbec5766]

Going back to OEM. The ribbed belt to the alternator screeches like a witch every time I start the truck.

[@curtfox91]

To loose??? It should not screech

[@rogerbec5766]

@@curtfox91 - Yes I tightened it twice. Got an OEM V belt. Having it installed this week. I'll let you know the results.

[@rogerbec5766]

@@curtfox91 - Got my 97 Nissan back from the shop today. The alternator OEM V belt I bought in Ebay ($24.84) works great! No more screeching. FYI

[@curtfox91]

@@rogerbec5766 🙌 YES

[@dillontaylor5738]

This all works with single cam 240sx’s too

[@curtfox91]

Yes S13 i should mention that in the Heading

[@yeayea881]

Thank you

[@curtfox91]

Your Welcome 🙏

[@typicaldavid389]

How do I know what pully making that squeaky sound ?

[@jlreyes7424]

Can you share part number for the pulley thay goes under the ac compressor please?

[@curtfox91]

I have to look other up

[@dougsyoutube4724]

What time of video shows the pulley u replaced ?? The pulley u bought ?

[@mdrolando2011]

Nice video bro! Any chance you can tell me which part/belt number belongs to which engine element?

[@curtfox91]

Just ask at your Local Auto Parts or Screenshot the video when you see me talking about the Belts and ask them which one is for what component. If i had my receipt i could help you

[@RobertBlevins]

I like you already Curtis. You should join the support forum Infamous Nissan. You'd fit in there real good. I have a 97 King Cab with 130,000 original. You can sort of see it behind me in my picture. Same color as yours, too. Woo hoo. Nissan hardbodies rule.

[@curtfox91]

I get on there sometimes but im not in the Forums yet . For sure will look into it Hell yeah Bruh Nothing like having a Hardbody 👌 the 96s- 97s are the Ultimate. Love Love Love these Trucks cant live without them

[@deborahvenetucci8278]

thank you sooooooo much

[@Darjan_Spasojevic]

Man I just watch d21 content to get more familiar with the truck. I had to change an ac belt. When I bought it ac didn't work, all it was the belt teeth were stripped. Put on a new belt and bam! Worked.

[@mirvgeorge3290]

What’s the size an number on the ac belt????

[@bboybrandon1992]

Hey bro thanks for the video got all the belts off... how you take that pulley out? The one by the ac compressor!

[@curtfox91]

The AC pulley comes out once you loosen the 2 bolts surrounding the pully. One in the center of the pulley and 1 behind it. And then to reinstall reverse the process

[@bboybrandon1992]

Yea that plate on the pulley was all tore up! Have to find another one at the junk yard... appreciate the help bro!

[@curtfox91]

bboybrandon1992 Try to get a New one if you can. no Problem goodluck if you need help with anything shoot me a Comment. I may have some knowledge

[@thegame4832]

I replaced the first belt but the smaller pulley started to smoke, any reason why?

[@quinnwitters206]

For the 9453m did that go onto the alternator system?

[@curtfox91]

Quinn Witters i forgot which ones are for which i have to find my receipt but i got it from Napa you can look on the website.

[@TheDamageinc81]

Is the crankshaft pulley suppose to move???

[@curtfox91]

Only if you put a tool on it that Bolt holding it should not be loose.

[@TheDamageinc81]

@@curtfox91 Appreciate that.

[@Ancryptoh]

That belt is a mf to get back on the alternator man I been struggling for hours. Any tips please lmk

[@cruzcervantes1848]

Did the pulley fix the squeak?

[@curtfox91]

Yes if you have a Squeak change your pulley or just Tighten up your belt. It should be one or the other or if tour belts are worn you would need to replace them.

[@curtfox91]

No squeaks for me .

[@dougsyoutube4724]

Dude what ac pulley did u replace ? U didn’t show it in the video is it the one under the ac compressor ???

[@jessesrx7]

Fucking curtis , thanks for the video

[@trustnobitcheqz]

Ever since I changed my ac belt on my 96 I get a high pitch squeal but I noticed your belt looks like my old one and the new one I got from Napa is much thinner.. do u think they gave me the wrong belt ? Part number 9362m

[@curtfox91]

Sorry for the Late reply! Possibly ask for an 88-97 ac belt from Napa they all should be the same. And if your squealing your belt might be to loose try to tighten up that Pulley a bit. Also change the pulley cause the bearing could be bad on the inside. Goodluck

[@curtfox91]

Yes 9362M is the belt i have. But to make sure its correct ask for the Year of the Truck mine is a 97 so we get the same parts.

[@trustnobitcheqz]

Curtis Fox91 I changed my ac pulley and my ps pulley and still has the same noise. Tension is also good on all belts. Everytime I put the old belt back on the noise goes away. But the belt for the ac that u have is the same one I got. I think I need a 97 ac belt but my truck is a 96 🤔

[@curtfox91]

Prince EQz 96 and 97 should share the same part numbers. I would believe the belt is to loose or the pulley is bad. But that’s why i say just go ask for the Year of your truck and see what belts they have available.

[@travietrades9301]

@@curtfox91 I HAVE A 97 AND NEED PART NUMBER FOR POWER STEERING BELT