9.9 hp Mercury Won’t Start - Fuel Line Issues.

[@John_D2]

Excellent idea for your test tank. I might have to try that.

[@walleyegil]

Good honest man love it.

[@ricksnowden8408]

Sweet little motor!

[@LivetofishOutboardRepair]

Rick Snowden…. Thanks for watching and commenting. Yes it was I would have liked to have kept it but it had to go back to the owner.

[@lewdog11]

nice video man

[@LivetofishOutboardRepair]

@shadowlazer580 … Hey, thanks for watching and commenting.

[@chandlermckenzie84]

Anyway to check the fuel line specifically? Carb has just been cleaned throughly will idle but once put in forward it dies out. I looked at the fuel line it’s starting to crack in a few places. I have that same motor.

[@LivetofishOutboardRepair]

Anytime your fuel line has cracks in it Replace it. You’re probably sucking air from Tiny pinholes in the fuel line.

[@chandlermckenzie84]

@@LivetofishOutboardRepair thank you

[@potorefo]

Hey having the same issue. Did you ever get it figured out?

[@LivetofishOutboardRepair]

Potorefe … yea there really wasn’t anything wrong with the motor, it was his fuel line being old and rotted sucking air. Once I used my own fuel line and primer bulb it ran fine.

[@georgie2158]

Well done brother I need some help. Quick connect female side fluel barb clip is stuck on the motor. The release clip lost its spring. How can i get the connect off the motor? Thank you man.

[@LivetofishOutboardRepair]

Georgie…. That’s a new one for me. I have never run across that problem. I guess I would try cutting it off trying not to damage the male end. I hope someone here can answer better than I can. Good luck and thanks for watching and commenting.

[@georgie2158]

@@LivetofishOutboardRepair i figured it out. I took the male end off the fuel line while fenale quick connect was still stuck on there. I brought both ends stuck to each other to my local marine shop caise i didnt want to damage the male end. Anyway they were able to pry them off eachother. Turned out the old o ring was way to small and was sqeezing way to hard. Save the male end and bought a new quick connect fuel clip. All fixed Thank you brother for answering back.

[@LivetofishOutboardRepair]

Georgie… I’m glad you were able to get it worked out.

[@AlanT-s8t]

Probably a bit late, but any idea what year that 9.9 was from? I have one just like it with no indications anywhere of what the year would be. Thanks ahead of time

[@LivetofishOutboardRepair]

Sorry I don't know the year.

[@noahlotow9752]

where did the get that fuel line

[@LivetofishOutboardRepair]

I believe I Purchased the fuel from a local Automotive Parts Store. You can get them fully assembled at www.westmarine.com

[@hudaz123]

What year is that motor? it's exactly same motor as mine but i coudnt read the serial numbers on mine

[@LivetofishOutboardRepair]

Sorry, I don't know

[@TR4zest]

I thought it was the loose spark plugs that were the issue?

[@LivetofishOutboardRepair]

I spoke to the owner and he told me he pulled the spark plugs after several attempts to start the motor. He just didn’t torque them down before bring me the motor. His fuel line looked like it was in very bad shape, so I believe this was his original problem.

[@TR4zest]

@@LivetofishOutboardRepair OK Thanks

[@SrdjanPejovic-zu6pm]

Gde da podesim da radi lepo

[@LivetofishOutboardRepair]

Sorry , I can’t translate into English

[@SrdjanPejovic-zu6pm]

@@LivetofishOutboardRepair where and how to adjust the smoke, so that it works well

[@SrdjanPejovic-zu6pm]

Mozete mi pokazati kako se steluje smesa na marineru 9.9 2 takta

[@LivetofishOutboardRepair]

Sorry I do not have a video on that