9 amps, 18 channels! JOYO Preamp House is a POWER HOUSE of tone

[@iamthew1zard]

i just got the Preamp House for christmas because of this video and i love it, thanks

[@youngstownassault2438]

I have tried MANY amp sim pedals and this, for the money, has been the best. I have tried the Boss IR-2, Sansamp, and various other Joyo amp sim pedals. This is the best. It delivers good sound and has EXCELLENT noise suppression (something most other similar products fail miserably esp when you are trying to get heavy tones w high gain). The only place it fails is with an external dirt pedal but the sounds it is equipped with are great you won't need one. Great for direct recording.

[@BrandonKJohnson]

Hey Taylor, how about a revisit of this pedal? (if you still have it) Run it thru your favorite tube amp effects return into your trusty ol Mesa 4x12 WITH CAB SIM TURNED OFF with a "standard" overdrive boost in front (TS or SD1)

[@mctwishvonnoodles9793]

Didn't expect a chugtastic cover of Ritual! I love your demos, new and old, and I think I'll have to check out the R-15 for myself

[@stanleyjohn4094]

Thanks for the lovely review. Got the joyo preamp house today, it's a great pedal. Am using it with my baby bomb to power up my 1/12 cab for home practices. The stock cab sim is not bad, the tube amp simulation is good enough. It responds really well with my analog pedals, TS9+Diva drive+SL drive+ Keeley's Omni Reverb.

[@swmorgan515]

Would love to hear how these simulated preamps respond to a being hit with an TS in front on a typical metal-boost setting.

[@DravenxEyeless]

I have it. Put a 808 in front and it melts your face.

[@davelanciani-dimaensionx]

Very well. I put a joyo vintage drive (which is a Tube Screamer clone) in front and it does exactly what you think it would do - cuts the bass, adds that mid-hump, and lets the Preamp House do the "chugs" for palm-muted metal riffs. Tried the Rectifier setting, LoneStar setting, 5150, any of them sound great.

[@leftofzeroofficial]

I use the Joyo splinter ( fat rat clone ) with the vintage overdrive in front and through a good orange cab sim it DOOMS.

[@danc3746]

Nice review! I picked up one of these today. I ran it through a Headrush 108 FRFR, then a SD PowerStation 170 and then a Marshall DSL 20 return loop, def sounds BEST with a real amp tube power section and real cab. I noticed something about its "saving" functions, you can't actually save a preset setting for EVERY amp model. The A and B buttons will only save one Clean and one Dist tone only, and it can be engaged no matter what amp model you are on.

[@aftertheendtimes]

The most good and epic rewiew seen so far of the Joyo preamp house,..Thanks Taylor ;)

[@TaylorDanley]

🙌

[@apoplexiamusic]

it sounds like they definitely nailed the EVH, the Orange and the ENGL sims... Edit: also that riff with the pinch harmonics was disgustingly beautiful

[@TaylorDanley]

🤘

[@Deathrape2001]

LOL!! Sounds NOTHING like ANYTHING by Van Halen, EVER! =)) Some pedal brand could put the label 'Mesa Rectifier' & if it sounded like crow calls or cow farts U wold pretend it sounds like a Mesa = a $ucker born every second! =))

[@I_Am_BearSquatch]

@@Deathrape2001 there's always one.

[@Deathrape2001]

​@@I_Am_BearSquatch The fact it sounds nothing like EVH tone has nothing 2 do with me, U troll.

[@michaelmolenda1712]

Greeeeeeeaaaaaat! Now I have to buy another thing for my guitar and hide it from my wife. haha Thanks for the review!

[@Metalbass1979]

I know that feeling!

[@brooklynboy1000]

Your wife or mommy? Step up and roar

[@crabbubbles1161]

Ask your wife why she hates you being happy.....preferably after you are lit with a few beers. *Get ready to rumble!....argument time!* Lol....or actually not really funny but more sad.....

[@davidstokes4630]

I'd definitely like this in front of one of my JOYO mini amps: JaCkMan, ZoMBie, or Tweedy! My wife controls PayPal... so I'm going to have to wait a while.

[@gainonten4031]

nice review! I had to get this out of my system: with that awesome Mesa cab, anything will sound good lol . I want one, damn

[@felixsuarez3940]

Thank you soo much for doing this video!!! Been thinking about getting this!!!

[@TaylorDanley]

No problem!!

[@lucky0brutus]

I’ve been debating getting this for a silent and quick practice option and there’s not many quality metal reviews out there. This is by far the best review of this pedal for metal that I’ve seen (not that my opinion as a random guy on the internet matters much 😆). Thanks for doing all tedious stuff so we can get a true idea of the tones! Keep crushing it dude! If you’re keeping the pedal for a while, it might be sick to try it with something like the cab box, which had an eq and presence control, to see if you can coax the exact tone you were looking for.

[@TaylorDanley]

Thanks for the comment! Yeah, I was thinking about the cab box and this... seems like a good pairing!

[@SwingEzzZZ]

Yeah, interesting! I wonder if this would get along well when paired with the cab box. I mean both have their own amp modeling and cab sims.

[@sashabagdasarow497]

Honestly, I'm a lover for those little things containing a lot of amps and stuff, but this amp sim sounds so much the same on all of the hi-gain settings. It's like a subtle difference.

[@billwatson8380]

It's because his guitar sounds like he's playing bass. Lol

[@RobzFreakGuitar]

I have to buy it, soon! Thanx for the video.

[@TaylorDanley]

🙌

[@AaronMorgan666]

Doin gods work man. As far as I'm concerned your either Mr.budget metal tone or Mr.metal amp modeler shooter outer. Thanks do much for this. Now you know whats next right? Comparing these preamps to the mooer preamps!

[@TaylorDanley]

😂 maybe, not sure yet... I have a lot on my calendar I want to get to first!

[@b.tee.2600]

Hey Taylor, just got an Origin 50 combo and I’m a “gainiac” and I don’t want to have it modded. Can you please help me get the best pedal for this combo! I have a 5150 OD into an Ultra metal. My EVH Frankie sounds good but my Dimebag doesn’t sound good at all and I have tried everything to get it too. I was even thinking of trading it for a 5150 combo but I’m on a budget right now. Do you think this joyo would work well and be versatile enough?

[@JakefromFH]

I'm buying one. I'm in love with this pedal.

[@PotatoGun94]

How do you feel like this compares to mooer preamp x2? pros and cons if possible?

[@immortalgram]

Nice! This is the best demo I've seen on this yet.

[@TaylorDanley]

🙌🤘

[@Burkhimself]

Enjoyed the vid....product sounds good. I kind of wished you’d have gave a few a try with a stock LP w/passives. For more generic rock tones (80’s/90’s).....with all the modes

[@bartoszkrawczyk4976]

How does it compare to Line 6 pod express?

[@wookierock7860]

I know I'm late to the party but this sealed the deal for me. This into the Seymour Duncan powerstage 200 is going to be massive

[@JamesLinenX]

@@wookierock7860 You think you're late?

[@TheDannyDerringerOfficial]

@@JamesLinenX felt lol

[@billyturk8117]

It has an fx loop so you could always add a sonic maximizer or amptweaker depth finder for presence and resonance controls? Im seriously done watching your videos dude ive literally changed my mind 4 times today alone on what pedal I want haha all videos ive already seen too lol been going back in time all day. 💙 you broski!

[@barryprosser1370]

Nice work dude! \m/ Never heard of this pedal but i will be looking into it more now.

[@TaylorDanley]

🙌

[@KPGuitarStudios]

But it's not a Behringer?! Granted you seem to a Joyo fan... maybe this is in Barry's future? :)

[@barryprosser1370]

@@KPGuitarStudios Dude... WHAT? :) I actually am not a big Behringer fan. I do really enjoy joyo.

[@KPGuitarStudios]

@@barryprosser1370 Joyo seems to have some sweet gear. I've got a few reviews to do of pedals of theirs as well. Barry as a Joyo artist? 😉

[@barryprosser1370]

@@KPGuitarStudios nice ill have to check them out. No... no I'm just a crazy bedroom guitarist haha :)

[@rangerdoc1029]

Would love to see this head to head against the Flamma.

[@ivanlydian6698]

I use the Preamp House + Flamma CAB 😅

[@Worsttalkfilm]

​@@ivanlydian6698 newbie question. with same gear , if i play to Amp. i need to turn off the flamma Cab? or just turn off cabsim feature. because i love the diezel on flamma Cab.

[@ivanlydian6698]

@@Worsttalkfilm If you go to an Amp Input/PowerAmp/FXReturn you have to turn off anything related to CAB Simulation. Flamma CAB or Joyo R-15 Cab Sim. If you like a profile in the Flamma CAB, try a FRFR Speaker

[@spearchuckerbear2817]

Awesome video brother

[@TaylorDanley]

Thanks 🙏

[@RYAN-cj2fp]

What is the signal chain you are using? I see the Mesa cab obviously

[@Demonik44]

have to try this little toy ;) thanks for revewing ! i have tried de joyo firebrand into a captor x and it is really surprising

[@lucaspontes91]

I bet that this wonderful piece of gear with its drive boosted by any TS-ish overdrive will sound HUGE and powerful. Would be glad to see it happening.

[@Deathrape2001]

If U have something that actually sounds good U don't need 2 'boost' it or whateverthefuk = jeez. Just slap a tube screamer on a pile of steamy dog poo & MAGIK! =))

[@bigridefpv688]

Have do you test that we can choose different amp on clean (ch A) and dirty (ch B) ?... Like fender/vox amp on Clean channel and evh on Dirty channel

[@ConstantineM]

Inches is from alien measure system :)

[@TaylorDanley]

😂

[@MusicTutorJay]

Is this digital or full analog pedal

[@ongdy7076]

hey taylor, a mooer 005 vs AMT P2 would be a great video ideas since they're emulating a 5150/6505 amps. let's go!

[@TaylorDanley]

Noted!

[@niclastname]

This would be a great travel amp with headphones if it had a basic reverb built in!

[@eaglebauer944]

Yeah, but the headphone out sounds horrible. I run mine through the fx return of an amp and use the amp's headphone out. Much better.

[@mrzapapate3083]

Are you playing straight to PA ? Or rec with a mic ? (Asking because the pedal is on a cab :) )

[@quiksilver78]

I always wondered why they chose a Fender Twin Reverb and a JCM 900 instead of the Deluxe Reverb and JCM 800. I think they just ripped off/borrowed the algorithm from Mooer

[@BrandonKJohnson]

Is this kinda like a cheap way to have all the bantamps in one box and ready to be plugged into the effects return of a nice amp?

[@Arwndr]

That is digital or analog processing inside amp?

[@joandelarosa6630]

It is digital.

[@SwingEzzZZ]

I put a Joyo Zip Amp in the send-return loop and it was muddy. I thought the Zip Amp might have messed up with the Preamp House and causing muddy sound so I changed from the Joyo Zip Amp to the Joyo Tauren which I think is a drive pedal but the sound was still muddy. It looked like something was wrong with the loop circuit. I tried again and this time I put the Tauren drive in front of the Preamp House but the sound was still muddy! Does anyone experience the same issue? Thanks.

[@Deathrape2001]

Wow what a big mystery! Considering that pretty much all the tones in this video R muddy as $hit =)) Can't possibly B the pedal, or krapy pickups! =))

[@SwingEzzZZ]

@@Deathrape2001 I think my unit was definitely defective. Returning to China didn't worth it.

[@Deathrape2001]

​@@SwingEzzZZ Nah, it's just another of the bazillion $cam 'guitar' products = just name the same sound with different EQ or something as if it sounds like a bunch of different famous expensive amps but of course it doesn't sound like any of them at all =)) The idea is to keep you fiddling with it until the return period expires or find someething else to do with it that didn't sound anything like you were promised =P It's criminal fraud but never prosecuted. Guitarists should do a class action on brands that say 'Marshall blabla' but doesn't sound like it.

[@SwingEzzZZ]

@@Deathrape2001 LOL.

[@MarceloEid]

Cool video bro !! So it's a digital pedal not analog, right ?

[@AxelGonzalez-ok3xy]

can you make a video of the two joyos combine?. the r8 and the r15.?????

[@davidwoods358]

This is a really cool product but I believe a choice of even 3 cab sims on this would have made a huge tonal difference on all of the amp tones.

[@TaylorDanley]

It definitely would! I think the built in cab IR is pretty usable... Just have to remember to be conservative with the bass and middle frequencies.

[@kinga428]

Connecting to the loop effects or directly ? wich is better ? In Katana I can configurate a little bit of chain of effects and preamps.

[@pizzaROX]

I'm pretty impressed. Especially for the price. Do you want to be on the road and stop at a bunk ass city and get your 400-500Ksr ceres stolen? Or your prized 120 watt tube amp? Or a like ~100 peda? l Having a small awesome sounding preamp like this at the price is an awesome selling point.

[@二加二]

The nux recto, plexi and steel string seems great, will you gonna try it?

[@TaylorDanley]

Yeah, possibly!

[@TroyNaumu808]

Where in the signal chain ? would this go if i already have a amp in the box sim ?

[@DugiDevetCarabolium]

Hey man, can you recommend chipest best AMP CAB pedal that i can play on my headphones with no additional gear, just guitar direct to pedal and headphones? Cheers man, you have great videos always!

[@brpadington]

It sounds good but it doesn't really sound like the amps it is supposed to be copying. It is like the mid-range reacts differently than the real amps do. Ultimately that doesn't matter as long as you can get a usable dirty sound and a clean sound.

[@glowskullsmedia1499]

Seems the volume knob set in maximum, wonder if this can be loud in the studio when drums plays in

[@otakuholly8885]

i got one of these used and no manual, i cant find it anywhere online and or know how to use it (was working at first, then i noticed lighting was blinking, and now i get no volume)

[@kevinmoore5206]

Can you just run this through a power amp with a cab? I'm looking for a pre amp pedal for clean tone. This looks interesting.

[@tommydstudios2094]

I was wondering if this pedal was decent. I almost bought it to check it out but I'm glad I didn't now lol. The low end sounds terribly flubby on every sim.

[@onairmastering]

Bought it because if this video! NOW, what's that mini stand? I want it!!

[@TaylorDanley]

Lol, it's like a 2 dollar cell phone stand I bought on Ebay. Glad you enjoyed the video!

[@extendedrangetechmetal1489]

i actually enjoyed the stock ir the most ..hmm

[@jesseparrish9198]

Would you prefer this over the mooer 005 preamp pedal?

[@kuzWich]

Most models remind me of amps being boosted by a TS frequency wise. That’s not the most ‘used to’ way, but could be way more convenient for high gain imho. Why not make the most of the tech, it is digital after all. Shame it lacks ir loading option, though the built in is quite usable. Btw, noticed the Master and Volume knobs are cranked all the way. Is it kinda shy with the output levels?

[@LucifdeLuther]

It`s like straight preamp sound, very mid heavy. Coupled with tube poweramp or PA that emulates PA-cab coupling it, maybe, sound better. Or if IR contains PA-cab interaction (i.e. impedance curve). Actual EVH 5153 straight from line out also sounds very mid-range. So it`s like tube preamp into "Hi-Fi" power amplifier (like PA from Randall transistor amps).

[@TaylorDanley]

I wouldn't say that, but the way I had it hooked up when I was monitoring myself for the live playing segments, I did need some extra volume.

[@prometherion3089]

Doesn’t it have a 3rd party IR?

[@erickgiron1868]

When I turn on my pedalboard both lights are turned on I need to disconnect the pedal and reconnect it back to use it. Is there a way to use it just pressing a footswitch without disconnect the pedal?

[@zigzagrz]

That jackson kelly, wow

[@TaylorDanley]

🙌🤘

[@Tripple-L432]

I have one on my live board.it works great,You can find great tones with about any rig set up, I have all my modulation effects ran through the loop of the Preamp House and it works great,i use the clean channel of the friedman and have three drives before it, it stacks well and I love it, I may get an IR loader just for different tonal characters.but it works well on its own.I go out of it into an mxr 10 band eq with stereo outs to two marshalls and a direct line to my board. great product.

[@Tripple-L432]

yep, The powerball amp kicks A##. but their all good, metal,rock,blues ,etc....

[@pizzaROX]

That's a sick rig man.

[@SwingEzzZZ]

I put a Joyo Zip Amp in the send-return loop and it was muddy. I thought the Zip Amp might have messed up with the Preamp House and causing muddy sound so I changed from the Joyo Zip Amp to the Joyo Tauren which I think is a drive pedal but the sound was still muddy. It looked like something was wrong with the loop circuit. I tried again and this time I put the Tauren drive in front of the Preamp House but the sound was still muddy! Does anyone experience the same issue? Thanks.

[@Tripple-L432]

no my tones are clean and clear. I have my drives in front of the preamp housein an isolated loop off the noise gate, all effects in the loop. but no drives or boost. coming out of the preamp house it hits an mxr 10 band eq,I use this one because it has stereo outs, but still not mudddy. I did have to experiment. But I have not had the muddy issue. keep workin on it you will get it.

[@SwingEzzZZ]

@@Tripple-L432 Thanks for the reply. I'll try again.

[@jeant9946]

Hi, what do you think about this vs Flamma preamp?

[@drashkum]

Does this have a DI built in Which i can plug directly to my yamaha mg10xu mixer?

[@ScienceofLogicTV]

Just use the XLR output. You can use it with the built-in cab sim for the full amp sound or use it without the cab sim for the preamp tone. That's what the toggle switch is for.

[@tonybarber420]

Is this better than buying these bantamps? Bout the same price but seems u get more for your money?

[@sbrailo6747]

How do you feel this stacks up against the Flamma pedal you played?

[@TaylorDanley]

This is built better, and a little bit easier to use. But I think the flamma models sound more similar to what they are emulating

[@michaelbullington1053]

Hey Taylor great playing and that thing sounds bad to the bone.but I've heard other demos and it didn't sound nothing like what yours sounded. My question does this sound that good and I'd be running it thru a power amp and cab and I'm going to get the joyo cab box

[@bivotarshamble3672]

A preamp pedal straight to a cab ? 🤔 What about the power amp ? I didn't think running a preamp pedal to a cabinet would work ... I'm so confused 😕

[@timbrowner6643]

Awsome man 👌🤟🤟

[@SuperCocoKrunch]

Dude i just bought american sound. If I know Joyo have something like this I would go for this instead. Nice video btw!

[@TaylorDanley]

🙌

[@thesage9081]

You can connect the preamp direct to the cabinet?

[@xXxEyesSewnShutxXx]

You need a power amp

[@thedanksavatron7782]

Does it power the cabinet or do I need to plug it into a head???

[@TaylorDanley]

No, it won't power a cab. If you plug it into a head, plug it into the fx return to bypass your preamp.

[@crabbubbles1161]

Thanks for doing this man....I just may get this as I'm desperate for a silent recording solution. All I really want to know for sure is can I run it direct into my computer and have a decent 'hey this sounds like a real guitar being played through a real amp' tone. If it can do that I'm getting it. Also the riffage starting at 16:25 was nice.

[@Deathrape2001]

A Sansamp sounds WAAAAY better =D In fact, that's basically what Rammstein does LOL The other is a 'Me$a Triaxis' (so I've read), which is just a tranny pedal in an overpriced box with a bunch of tubes AFTER the distortion 2 warm things up a bit, but they sound kind of hollow & not really better than a Sansamp. They use the PSA-1 but the pedals sound about the same. The Behringer TM300 is very similar for high gain but the low gain sounds R more harsh.

[@danielbarraza98]

could you make a video about the best bass pedal thanks for your videos they are informative

[@Tohfool]

Can I plug this with another preamp?

[@sergiojimenez9986]

You think pre amp pedals are better than modelers? I mean, sound quality in high gain sounds

[@randymiles904]

I wonder how this would do if you used it with one of the joyo amps. Like that blue one that's just a really clean amp? I can't think of the name atm. 🤔

[@mattgilbert7347]

Bluejay?

[@randymiles904]

@@mattgilbert7347 atomic. 😉

[@slayabouts]

Wait, this thing is analog? I figured it would have been digital for sure

[@OW79]

Are there any presets?

[@Zhorellski]

This is what Strymon Iridium should have been!

[@dreamaster9000]

If the Iridium had Dual Rectifier model in it... I would have bought it.

[@dulouz]

Strymon knows their market. Tons of church guitarists love it.

[@jwrocks83]

Would this pedal be plugged in to input of an amplifier or in the effects loop, since it’s a preamp pedal?

[@pastorkev777]

In on the FX loop is the intended use, but try both. Nothing is wrong tonally if you like it.

[@michaelbullington1053]

How would it sound straight into a clean power amp

[@dlwhite6537]

Something like a black heart clean tube amp.

[@joeyvanostrand3655]

What Pup covers* are in that Kelly?

[@TaylorDanley]

They aren't covers! Those are the gold color EMG 81/85 combo

[@joeyvanostrand3655]

@@TaylorDanley very nice! I haven't seen those yet!

[@TaylorDanley]

Check them out! They are great. I have a couple of the brushed black also. Very nice!

[@joeyvanostrand3655]

@@TaylorDanley where did you put the battery? Was there enough room in one of the cavities? I am totally against routing my beautiful KEX man!

[@TaylorDanley]

@@joeyvanostrand3655 I dont use a tone knob, so I put the battery where the pot would normally go. You might be able to cram it in there with a tone knob, but I never use one anyways so 🤷‍♂️

[@yeahuri4724]

It’s funny how the ML IR destroys the in build cab sim. 😂 I completely ignore this product after hearing it through that ML Sound Lab IR. Totally sold on the IR.

[@jcalzada74]

First tone whit the 900 sound like bolt trower

[@aftertheendtimes]

The 1/4 inch is what i say though i live ina metric country like Sweden . ;D

[@AngeloBocchino]

3:28 - haha yeah man wtf is quarter inch?

[@MrMarcburger]

it doesn't do clean, then? only noise?

[@davidstokes4630]

I'm sure it does great clean tones... He doesn't do clean!

[@electron7373]

I think even us metric types say quarter inch coz it easier to say :)

[@ScienceofLogicTV]

Great. Why do we still stick to wanting real tube amps? I'm used to recording infront of my PC but still bought a Marshall DSL20CR a few years ago. I hate the fact, that it sounds like shit when played quietly and at the level it sounds good I need hearing protection. It is way easier and more flexible to dial in a decent tone with a software or hardware sim.

[@fredriksvard2603]

I find it to be the other way around, very easy to mess up settings with plugins for me. Still havent been able to find the right settings with dsp neural, mercuriall etc.

[@ScienceofLogicTV]

@@fredriksvard2603 It depends on the plugin for me. There is crap out there for sure - even among the popular ones. I think real amps simply don‘t work for me that well, because the tone you dial in is not what you hear later with a mic. Additionally using a tube amp with impulses is inconvenient and makes not enough difference (DSL20CR vs Joyo British Sound).

[@fredriksvard2603]

@@ScienceofLogicTV Yeah thats true too. My (limited) experience is that amos usually sound at least decent even if the micd sound isnt the same as the sound you hear in the room, whereas with plugins you can easily make it unlistenable by just turning one knob a couple of notches. Just my 2c.

[@BrandonKJohnson]

Hey Taylor . . . would you consider this to kinda be like all of the Joyo Bantamps in one box? . . . aka would you say I should get the Joyo Zombie or get the Preamp House? ?

[@TaylorDanley]

That might be what they're going for but, they're just different things. You cant power anything with the preamp house, it's really meant to be used in conjunction with another piece of gear, where as the bantamps will power a cab and give you great tone. It could just be me as well, but ai feel like there is more variation in the sound between the bantamps, even though they only have a tone knob vs the preamp house having a fully adjustable eq... but I could be wrong in that.

[@BrandonKJohnson]

@@TaylorDanley thanks man!!! Thanks for replying and replying with actual advice 😁 I think I'm go with the Zombie and run my MXR 10band eq thru the effects loop and go from there. Maybe throw a tubescreamer or ds1 in between guitar and amp. Thanks again!!!!

[@BrandonKJohnson]

@@TaylorDanley p.s. . . have you checked out the Joyo Extreme Metal Distortion pedal yet? I saw your video on the BOOGIE pedal but honestly wasn't impressed . . . I saw Lee Armitage video on the Extreme Metal Pedal and it sounds rather impressive (with a straight up clean amp obviously)

[@carloswelton796]

Muito bom!

[@JackSoldano]

Great video I've struggled to find much info about this pedal, how does it compare to the Joyo Cab Box?

[@TaylorDanley]

They're completely different things, that compliment each other nicely. This is meant to recreate the preamp sound of an amp and the cab box is recreating the speaker sound.

[@MaxPower-js1sk]

The Lonestar sounded nothing like a Lonestar.

[@tomix1970pl1]

Clean tone of this guitar kills my ears.

[@iwilrage]

Well damn had high hopes

[@juanvaldez4043]

I don’t even care about the gear he’s reviewing after the jam session. 😎

[@TaylorDanley]

🙌

[@piresrobson]

How are you running it? No power amp? Sounds muddy sorry

[@apoplexiamusic]

6.35 mm is indeed 1/4 inch ;)

[@TaylorDanley]

😂 I figured that was the case!

[@KPGuitarStudios]

You international %&*$%! Hey wait.... tabernak! :) Indeed, mm is a good way to measure certain things :D

[@kazzTrismus]

metric vs freedom units

[@emax5920]

its priti awesome :D

[@boddumblues]

Fender twin reverb - and no reverb ;-)

[@FulcrumsEdge]

Ahhh you trimmed the beard! Couldn't get that green goo out of it in your unedited episode?

[@TaylorDanley]

😂😂😂 everytime I grow my beard put, I get to a point where I cant stand it anymore. But yeah, that too

[@FulcrumsEdge]

@@TaylorDanley I've been there with my beard and hair way too often... Too much work getting the goo out and keeping it tidy.

[@InTheSh8]

Great! But it is not YNGL, like Yngwie. It is ANGL, like Angus Young! Not important, man, I wish I could also do product videos like you. Very professional. You get better every single time.

[@apoplexiamusic]

but the the pronounciation of the E depends on one's regional accent though ;)

[@TaylorDanley]

🙌

[@InTheSh8]

@@apoplexiamusic Certainly, but not if the amp is a GERMAN amp (just joking)!!!

[@MetalZoned]

Learned something new, I pronounced it like Taylor does, as do most Americans

[@apoplexiamusic]

Andreas Nold 😂 indeed!