9 PCB Board Holders reviewed - Qianli iPinch Kaisi Magnetic - Which is best

[@josearrasola7236]

Good day sir I’ve been sick had chemo done last week and wasn’t able to keep with your videos ! Yes 🙌 we do you a master teacher , leader and inspire , you are part of my prayers and the reason I don’t give up but since I started I’ve been rob twice and left me clean

[@4traxxsify]

My favorite part of your videos is when you smile after you fix something!

[@chadbelyea8152]

Absolutely love your channel man. I found it a couple weeks ago and can't get enough. I really do enjoy everything you put out and can't wait for new uploads, please keep up the good work, 🙏 and be sure you have a new life time subscriber indefinitely.😊

[@tromick]

This guy sees himself as aged with his hair colour but i see him as a teacher in late 30s who is keeping alive the young version in it. I can see it from your talk, from your eyes, even from your glowing cheeks. You have family, you have your own shop which you its a great job for someone who loves tech, you have people who loves you (count me) and you have great kids. This is grace sir! Everyone wants a life like that!

[@demalucien3309]

Just in time for my new PCB bolder options. Thanks Alex!

[@vaughan5990]

Hi from Australia. Thank you for the great videos and reviews. I've just ordered the Universal PCB Board Holder and a silicone mat from your site. Keep up the great content.

[@pr0xZen]

As a user of the last type, I agree. A few tips though. 1) it comes in 4 or 5 different sizes. from 2 to 6 sliders. The one with 2 sliders is a bit shorter, 3 and up is same length. I have the 3-slider one, and its still heavy, probably 400 grams. 2) I'm not sure what it is, but there is a hard coating on the surface that is non conductive. 3) There are 3 different heights the board can sit on, on the blue pieces, but no groove that close in again that can knock off components. Its shaped more like stair steps. So you lift the board up 2 different heights, or at the lowest, sit flush directly on the surface. 4) you can loosen the screws with a hex key, then there is a little room for adjusting the blue pieces if needed. Same for the spring and button sliders. 5) If it gets really grimy, the whole thing can be disassembled easily, and plop the parts in the ultrasonic cleaner.

[@bigdmc6459]

Hi there how do the plastic bits hold up are they high temp. Using a heat gun or solder will they melt?

[@scooterg166]

Nice review. I’ve noticed you are just smashing it with new subscribers!! Congrats!!

[@travisfrost6508]

The advantage of the ipinch is that you can easily rotate the entire fixture if you need a certain angle and you have limited space under a microscope. works great. does hold a switch board and opens and closes equally as quickly as any board holder that has screw fixtures.

[@leonardmilcin7798]

Ordered based on video. Looks sturdy and functional. Thanks!

[@fpgaguy]

needed some supplies was going to go aliexpress but I have to buy from you now since you did all these videos with excellent reviews

[@kennethyeoman776]

Thanks for your over view of all the Board Holders, your opinion matters to us, so Thanks!

[@KorAllRBare]

WAIT!.. With regards to PCB Holder Number 5 @ 19:16 Is it possible to use the central opening so that the clamps can be screwed inward, ergo having the board central to the PCB Holder? 🤨 Never Mind I just got to the point where you answered my question..

[@DustinWatts]

Haha... I can remember how lucky I felt when a video got a comment. :) Also funny that your "worst" holder is the holder I use a lot. But... the boards I design are usually bigger and also less oddly shaped with more room at the edge of the board.

[@renebea9]

what's the model number of the last 2 pcb holders?

[@nilomyki]

Can the PanaVise PCB Holder Plastic Clamps take excessive heat from a hot air station (is the plastic heat-resistant)?

[@floridaapplemacprosinc.2224]

the winner, looks like its big enough to work on MacBook Air and MacBook Pro boards too! a big plus for me!

[@in-sympathy-old]

Hi. Thanks for a great video, as always. Wondered what do you or anyone else think about Hakko Omnivise? Have any of you guys used it? Do you recommend? Is having two of them beneficial for everyday use? Thanks 🙏

[@timeltdme4355]

i think the first holder's usage should be, you tighten the screw approximately depending on the size of the board, then push the spring and fit the board

[@sirchambers691]

Great video been watching you a while now, keep em coming!

[@dodgydruid]

I am considering that iPinch because it looks just great for holding watch cases, quartz pcb's and watch movements on a nice level surface that I can get my glass over without fouling or my scope too.

[@stefanlechner]

Very nice explained. You are the best, such long videos mean a lot of work. Thank you very much for let us be a part of you and your work. Thank you👍👌

[@TECHHUBfixitup]

Looking at the condition of the table,any one can predict how much work you have done on it and how much relief and satisfaction you have given to your customer by reparing there gadgets.Just awesome.

[@hightttech]

I could use the "TANK". Thank you for detailed review.

[@cybermaus]

Very nice. I had been wondering about these magnet boards. I do also have the oldest one you show, have it already for 10+ years, but its not so good. Usually I use one similar to the Clamp at 9minute

[@aliefvienna7]

Sir can i know what microscope arm/stand do you use before you use this Articulating Arm? Looking for low budget arm for my low budget microscope.

[@TboneLoyal]

Great video. Thanks for the review. You need to work on the " But wait there's more" :) Like the infomercials. Joking. Keep up the great work. I will be buying one you offer magnetic.

[@RespawnRestricted]

You should clamp one of the magnetic ones in the one that swivels that way you could pull up one of the boards that needs to be in one of them at a 90 degree angle

[@ictrepairs6963]

For the QianLi have you tried to clean it with IPA ? I do it once a wile to bring it back to normal without the need of a lubricant . I really love this tool by the way.

[@rasheed3039]

Great review and this "TANK" looks really awesome and a life time companion 😄.Thank you 👍

[@StromboliKicks]

How did you know I'm looking for one? Very convenient video. :D

[@windowsxpprofessional]

Your soldering techniques are best😁

[@martinprehjan9944]

Do what I did!!! I got myself a mini lathes bottom piece, you know the part that holds the part to get worked on, and changed the clips, voila...instant multi size board holder, and you can even pivot on three different axis's...works great costs a bit, but did I mention it worked great?

[@benjamindelosreyes6329]

Good review on all the board holders one question though when are you going to restock on your custom magnet holder?

[@garydeanstovall370]

Have you ever repaired a tech 2 scanner? Mine won't power on. One video shows a dc-dc converter usually faulty. Any info would be appreciated.

[@eddraper]

Northridge Fix - we wear the threads off board holders in two years. This is how hard we work for you. :-)

[@normanmader4362]

I would have asked for the Hakko Omnivise to be included in a comparison, which also differentiates between soldering work and hot air work...

[@nimicdevazut]

Hi Huseyin! I have a question. How we can verify a broken iphone (black screen) if it's a clone 1:1 and it's not a real one? I mean in that case if you want to buy a broken iphone from a guy on the street and you don't have the possibility to open it. THX!

[@jmdb1414]

What about Macbook logic boards? Can they fit? If not what's the best holder for larger pcb?

[@sj55]

Trust me this board holder is a tank I purchased one from them and it’s flawless the best I’ve ever had If you haven’t had one yet then buy it you won’t regret it 👍🇬🇧

[@jaymanbuzz89]

Where did you get it or what's it called?

[@sj55]

@@jaymanbuzz89 Check on the description the link is there

[@jaymanbuzz89]

@@sj55 ahh, I saw the link but thought that was for their own board holder, the magnetic one. Was trying to find the #1 one in UK of Europe.

[@elmestariahmed4535]

@@sj55 hi

[@elmestariahmed4535]

@@sj55 can not find the link

[@kechikpenang314]

Where can i get that silver magnet sir?

[@MarianKeller]

The last PCB holder looks really neat, anyone knows if it's also available in Europe?

[@tsukimaru131]

were you able to find it? If so, what's it called?

[@VideoServicesLI]

Love that 'tank! Nice review video.

[@maxblade01]

It’s okay to compare before suggesting things to others... thanks mr. flash 😌

[@saikasarla5750]

You are smile any problem solved sir 🙏

[@abdulmoiz7620]

Will you please make a video on your instruments? I wanted to know which soldering iron you use thats to comfortable in use and mini in size, which hot air gun you use and all other I really appreciate if you make one video about this. Love from Pakistan 💓 and waiting for your response ✌

[@niteshkumarmaurya6601]

Does heating reduce the magnetization power of magnetic tips

[@ItsBoyRed]

is the last one magnetic?

[@suryavanshib]

Awesome ✌🏻✌🏻✌🏻 Feels good to hear your valuable thoughts and worthy experiences 👍🏻👍🏻👍🏻 Keep it up 🙏🏻🙏🏻🙏🏻

[@AG-cg7lk]

I know it's an old video, but surely you are not using that 'previous winner' holder correctly? It looks as though it is designed to clamp the board in the centre, by winding both clamps in onto the sides of the pcb. Looked like the switch board would clamp fine using it that way.

[@JassonQuill]

5:53 i click like because you use grams

[@travisfrost6508]

i after using it quite a bit I suggest the ipinch for cellphone boards , works great and can be rotated for just the right angle without hitting your microscope base.

[@travisfrost6508]

and it can hold a switch board... and it's 1 inch and maybe an 8th not an inch and a half. just being honest...

[@SupremeRepairs]

ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ಮಾಹಿತಿ 👌🌹❤️ amazing and beautiful information 🌹❤️🙏

[@SURGE101]

The qianli ipinch is a brilliant board holder, I think you just got some flux or dirt on the mechanism. You should put your one in a ultrasonic cleaner, it would probably start working again if you did.

[@ARTaudio440]

Watching here from Doha Qatar 😊

[@yurkosirko2754]

Great review, thank you.

[@ravichandel8690]

sir how to get technician job in your firm

[@coctailrob]

I have the worst one of the 9. I thought it was a little awkward to use. Time to invest in a better one

[@trollobite1629]

You ain't alone the UK mixes all it's measurements up too.

[@sergiowillianremes5268]

Great information friend!

[@ChokoARG]

Thank you! you saved me 20 dollars

[@muhsinimruma802]

useful video to me now i know which 1 is the best

[@alphabeets]

“Click of Quality”!

[@nareshs3110]

Thank you 💐

[@em0_tion]

Great comparison 👍

[@MrT_Repair_YT]

regular watching your videos, i have 1st one pcb holder

[@Ueieieiddudu]

Great review 👍

[@nikobobich9726]

2 hakko omniverse holders is the best you can get and if you want to get even more precise get helping hands with the 2 hakkos and you're more than good to go

[@debin83]

Thanks for the good information video's.....👍

[@hazimjauhari5188]

usefull video bro. i found the smaller 'tank'. the 'tank' which you are using too big me. anyway, once again thanks bro.

[@nareshs3110]

I am indian how to purchase magnetic PCB stand

[@NovaEmotion]

thx a lot , usefull video

[@FreePeople77]

Interesting video, Thank you

[@chasefournier]

HAHAHA cocomellon song! i get it because i have a daughter OBSESSDED with cocomellon.

[@dkaytan]

Thank you Sir.

[@donnierobertson3088]

Nice job and video

[@msafirisaimoni9561]

Thanks for your video is help me

[@abzz5725]

Great Great great Really appreciate it 👌👌👌👏👏👏

[@hendi512]

I am from Indonesia, i like this video

[@DraganVlaj]

I buy one is the best holder !

[@Mss-sj1fb]

Yes you right. that was the best.

[@SULTANOVIDRIS747]

hi do you have a paypal working

[@NorthridgeFix]

yes of course

[@physicistmustafaameen3643]

My regards from IRAQ - Baghdad

[@canonpop2895]

I LIKE YOUR VIDEOS TANKS BRO

[@hadjsaidahmed3144]

For me the 5 is the best

[@alcasey3551]

You can do infomercials too? is there anything you can't do? Big Boss is right ; you're the boss of all bosses 👌👍👏😊

[@alcasey3551]

@@KTHKUHNKK We saw him dancing to Michael Jackson once

[@DeathRLavigne]

Not only in Europe my friend, but the rest of the world use cm and gram, haha

[@Oficial_Quad_Damage]

Super board holder

[@Bonbon3024]

review board holder no 2 🤣🤣🤣🤣 This holder Board LEGEND😂😂😂😂

[@jssabdo3718]

Hello friend, please respond. I fix the phones and follow your wonderful channel. I have a request to whom I need plans for all Samsung phones. Please thank you. Please reply

[@BHSAHFAD]

I can't get over the fact how you look like Jon Stewart

[@razvanzaharescu7068]

nice

[@jeypsperez499]

I misread it as "hoarders". Sorry.

[@FahadAli-vx5ki]

شكرا من القلب ❤️

[@pasinduudayanga4867]

💗

[@KNFIX-CUCHI]

👍👍👍👌👌

[@JMDangler]

Just think of how many hiroshima bombs were fixed using these holders.

[@SU-lu8iw]

الله ينور طريقك و يوفقك

[@abiamochoaliba5229]

I think board holder number 3 is the best but you gonna need 3 or 4 of them to hold big motherboard

[@didarfarage7129]

29:07 mama look how fast i am going!