900 degree Steering wheel using Arduino Unojoy | Upgrading 270⁰ steering wheel to 900⁰ [In ENGLISH]

[@AravindSajish-dm6yi]

Bro what is the size of bearing

[@2cr496]

i use one small and one big wheel and used a ruber band to conect both instead of gear it works same as gears

[@techathome]

Nice 🙂

[@2cr496]

@@techathome brother i have a question can we make force feedback wheel with arduino UNO?

[@techathome]

No.

[@DinaxOp]

Which types of potentiometer is used like single turn or multi turn ?

[@techathome]

Normal single turn 10k potentiometer is used. To increase the rotation to 900 degree, gear mechanism is added.

[@jesinsinan7044]

Sir can i make this gaming steering with arduino nano pls replay to me

[@techathome]

No

[@TragicGFuel]

@@jesinsinan7044 you can make one with arduino nano, fork adafruit's hid gamepad library and use it.

[@reactionmoods3130]

hello, is it possible to give both gearwheel models in a4 form?

[@bossoy0769]

Bro can i just attach a Rotary Encoder to the shaft of the steering Wheel ?

[@techathome]

Are you referring to FFB wheel tutorial or this video?

[@bossoy0769]

@@techathome only this video so without the Gears only stach the rotary Encoder to the Steuerung Wheel steering

[@techathome]

This is not encoder, it's 10k potentiometer. You can use directly, but wheel will be just 270 degree. To increase degrees of rotation, we have used gears.

[@Abhinavgaming2310]

Hello can I use a small gear and make to 270° to 540°

[@techathome]

Yes you can go with that, slightly degree will change finally.

[@RollyjrMagbanua]

Thank you very much. I had an idea how to do it😊

[@techathome]

Welcome❤️

[@samirendrasao8906]

Can i use ready made steering wheel from Amazon that are for swaps for high class wheels such as g29?

[@techathome]

Yes

[@priyanshupradhan1521]

Can i add analog( as shown in you ffb steering video )clutch,break and accelerator and use adruino Uno to configure all of them along with this steering with a 100k potentiometer.

[@techathome]

Use this circuit and code: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=share_link

[@GamoDude2.O]

Bro is it 270 degrees rotation or 900 degrees. If it’s 270 degrees how can I make it 900 degrees rotation Please Reply😢

[@techathome]

Potentiometer is 270 degrees , After using the gears the steering is 900 degree.

[@DinaxOp]

Will arduino uno (SMD IC ) work for this project?

[@techathome]

No , Only DIP version works

[@tanishc5]

Hey bro did you try makind it with your smd ic one pls tell bro

[@techathome]

SMD version of Arduino has ch340 chip for serial communication. But this firmware is for 16u2 chip which is present on Dip version of Arduino.

[@groovy8829]

Can we add dc motor to feel the force feed back.....using multi turn potentiometer

[@techathome]

That is not possible in this

[@MAlif-qg5sn]

Its not possible cuz dude dont use leonardo

[@ardybanquirigo-ob7bi]

​@@MAlif-qg5snit's the fucking same thing as other Arduinos

[@Enchatèmção]

Bro can we use ttp223 sensor instead of the buttons

[@techathome]

In this code, the digital buttons should be connected to GND to activate. If this sensor gives low signal when it is activated, then it might work.

[@Mbb2220]

Hello! I need some help. I don't have a 3d printer for the gears, is there any way to use a rotary encoder module instead?

[@techathome]

This firmware doesn't work with encoder. There is new version of wheel, you can make this version with rotary encoder: kzbin.info/www/bejne/bKGomoysjLF6gJYsi=sxaTuGF_tOPdNSgE Complete playlist: kzbin.info/aero/PL4B0LEKY-jrROPZPEDMZ4DPqISPXvVsdL&si=qAb80jzDaFeD69gm

[@alessandroazevedo2370]

I would like to see playing in Gran Turismo 7 or Asserto Corsa competizione if it has the same precision.

[@techathome]

I tried on Forza horizon, It won't work. This is good for simulator like Euro truck

[@masskonfuzion]

@@techathome how do you mean it won't work with Forza Horizon? Is it just not precise enough?

[@bossoy0769]

@@masskonfuziondid you try it?

[@masskonfuzion]

No not yet - I wanted to hear what the precision issues are. But I want to try it..

[@bossoy0769]

@@masskonfuzion so i read some comments on this video and i think the issue is that the arduino isnt getting detected as a gamepad

[@d5tscript797]

bro can you make steering wheel using fan gear box pls

[@techathome]

Can you send any photo?

[@d5tscript797]

@@techathome how? Instagram?

[@NewDGamerZ]

What if we use b20k potensio😅

[@techathome]

Functionally it will work, i think there might be slight difference in the rotation.

[@Enchatèmção]

If we use multi turn potentiometer can we not use the gears and will we get the same experience??? Pls reply

[@ardybanquirigo-ob7bi]

Nah the ratio will be the same

[@kangbrudas6559]

how to deal with the potential vibrating when in use, how do you make it not vibrate when playing the euro truck steer game to vibrate

[@techathome]

Use B10K potentiometer.

[@imhumanx]

@@techathome im facing similar issue if i turn the wheel right it slow and smoothly turned, if i turn left it rapidly turn what should I do? b10k potentialmeter is used

[@allandaniel9399]

Where did you get the threaded bolt ??

[@techathome]

You will get in every hardware shops which sell bolt, nuts, tools and construction materials.

[@maze9065]

what game were you playing at the end?

[@techathome]

Euro truck simulator 2

[@STREET_LORD_REAL]

Hello sir How to upload the Arduino Uno firmware, what is the Smd Atmega 328 version

[@techathome]

To upload the firmware, you have to go into DFU mode which is possible only in DIP version. Used in this tutorial: kzbin.info/www/bejne/eYG6gYOrZ8mFba8 But this is not possible in SMD version

[@STREET_LORD_REAL]

@@techathome means the smd version cannot be used to make a steering wheel

[@techathome]

Yes not possible with SMD

[@STREET_LORD_REAL]

@@techathome the amd version can't enter dfu mode is there a way is there really no such feature for smd only dip

[@akhildavis4457]

Can i use 10k Ohm 3590S Precision Multiturn Potentiometer.

[@techathome]

I have not tried that, It might work.

[@akhildavis4457]

@@techathome that Potentiometer has in built 10 turns so we didn't need to use gears that's why I asked you

[@techathome]

Then it should work, At the end Arduino need voltage drop.

[@akhildavis4457]

@@techathome so can you help me what should I do

[@akhildavis4457]

@@techathome can u give me your any other contact method

[@Channaraju.B]

Bro plz make one video of installing a game in laptop with h shifting

[@Abhinavgaming2310]

Can u pleaseee Pls use 38 teeth instead of 56 I am deciding to plsssssss😢 big fan ❤

[@techathome]

Yes you can use

[@AravindSajish-dm6yi]

How do you findthe center position of steering wheel

[@techathome]

You have to check in game controller properties. Refer this video completely: kzbin.info/www/bejne/eYG6gYOrZ8mFba8

[@praveencricket3961]

Bro what kind of wires u have used in your project

[@techathome]

Jumper wires , you can use any, no specific

[@reveledgamer3373]

Pls help me !! Does 14 teeth gear will work ??

[@techathome]

Yes

[@ajaygeorge5731]

Bro i use same 10k potentiometer but its turnings are not smooth as it is shown in the video

[@techathome]

Are are using gear wheels like we have shown or directly potentiometer

[@champadevimeghwal2941]

Hy can this satup work for bus simulator indonesia game

[@techathome]

Yes, It will work

[@champadevimeghwal2941]

Please make and vedio with bus simulator Indonesia game with string wheel and gear

[@muhammedmisbahasalam]

Did u use Arduino Uno or Leonardo

[@techathome]

Arduino Uno Tutorial link : kzbin.info/www/bejne/eYG6gYOrZ8mFba8

[@superblackdbz1818]

Does it work on Arduino Pro Mini?

[@techathome]

No

[@LIMIT_90]

Bro i want to make a steering wheel of 900° but i cant afford gears and things Bro Can make using mouse till 500-600 °

[@techathome]

kzbin.info/www/bejne/h2PFhIOLq7KEjacsi=JtYI1ABQSGCtzw_L

[@ambarinikusumawati8619]

Wait how it is single turn potentio?

[@techathome]

It is normal 10k potentiometer with outer body made of plastic To increase turns, we have used gears.

[@AxtrodoSulfur]

Will it work on assetto corsa?

[@techathome]

No

[@blackbonex]

How should I buy the potentiometer? 10k For Arduino?

[@techathome]

Yes, 10k normal potentiometer

[@blackbonex]

@@techathome thanks for your videos! I've been looking at them and I'll try it this week, my idea was to make the steering wheel with 900° and add buttons for turn signals, lights and paddle changes. thanks again for your videos! They motivate a lot lol

[@blackbonex]

@@techathome sorry for the inconvenience but do you know if it is possible to use 20k or 50k potentiometers? unfortunately they are the only ones I have available :(

[@techathome]

You can use any value of Potentiometer. It doesn't vary much.

[@saifii-hb2ft]

Bro did u make it?

[@radhikasujai4012]

Can i use 15 and 60 ?

[@techathome]

Yes you can use.

[@bocahgame3011]

Name for potensio??

[@techathome]

B10k

[@narendraprasad8597]

What is Rod Width And Length

[@techathome]

30cm 5mm thickness, Its also explained in the video.

[@muhammadsaud2337]

where will ut be availble electronics shop? @@techathome

[@parkdoja8845]

Can u made one for me and i will buy it please

[@Enchatèmção]

Potentiometer link please

[@techathome]

robu.in/product/10k-ohm-3pin-15mm-shaft-potentiometer-pack-of-3/?gad_source=1&gclid=CjwKCAjwrIixBhBbEiwACEqDJRzZ6C4ovcPyKpg1oJxd2siAU7StePwtmPq33Jq027l6QmVxxaUtPRoCWqIQAvD_BwE

[@notpalda1423]

Why dont you connect it to a cheap controller ?

[@techathome]

This firmware is only supported for Arduino uno.

[@sumitbalihar398]

Bhai ismein force feedback toh hai hi nhi…. Feel kaise aayega

[@techathome]

We will make it soon This is just improved version from our old one with direct potentiometer connected to steering

[@RanbirSingh-n2n]

Which game was in starting

[@techathome]

Euro Truck Simulator 2

[@RanbirSingh-n2n]

@@techathome thanks

[@tanishkprem1028]

will this work on forza? if not then why?

[@techathome]

No, the game does not detects the unojoy device firmware

[@tanishkprem1028]

@@techathome what if I use emuwheel

[@Zhavi-v1f]

Bro what is the name of the game that you are playing

[@techathome]

Euro truck simulator 2

[@subhamravtole]

Which potentiometer you use

[@techathome]

B10k It is normal 10k potentiometer.

[@games4life382]

Instead of 14 can I use 26 teeth? Please reply fast

[@techathome]

No

[@superblackdbz1818]

you using in video 15 thoot in Amazon gear14 thoot

[@techathome]

One tooth does not make major difference on this project.

[@vanitagoyal2291]

Which game?

[@techathome]

Euro truck simulator 2

[@veerajsawant28]

Bro would you like to sell it for 2000

[@techathome]

No we are not selling, we will be doing some upgradation to this.

[@Harniart]

Bro please play forza horizon 5

[@techathome]

This doesn't work.

[@danielmiloknoja8640]

WTF ????!? 🤔

[@TrilokhYt-ky3nz]

Can i play gta 5

[@techathome]

No Work good for Euro truck simulator

[@superblackdbz1818]

Does it work on Arduino Pro Mini?

[@techathome]

This UnoJoy firmware is only for Arduino Uno