9007 LED BULB UPGRADE - 10K LUMEN JDMastar - DODGE DAKOTA

[@BoostedMotorsports]

Checkout these 10k lumen 9007 bulbs HERE: amzn.to/3RHoeAz

[@jondoe4667]

I have LEDs in my Silverado, and my Grand Cherokee. The Dakota I just bought has stock lights, paired with old oxidized housings. It's like driving with no lights compared to my other vehicles. Headlights is always one of the first things I change on a new vehicle.

[@purplesmoke4150]

Have a 2003 dakota, definitely improves the look, thanks

[@DarrensTruckzs]

Ya that totally improves not only the lighting but also improves it in a more modern front end look .. I like how they come already plug an play too.. 👍

[@johnruble3454]

bro this really helped me i was stumped how to get my led lights on i bought sealight xenower ones from amazon i was like how the heck does it fit this defiantly helped my dakota build

[@HIPPIETHUG92109]

I purchased the AUXITO 9007 HB5 LED Headlight Bulb Lamp High Low Beam Super Bright Kit Canbus M2 on sale with free S&H $35.00 These lights are absolutely incredible especially for the price. It's now been a year with zero issues. The cutoff beam design is spot on. I highly recommend them.

[@bryangaughan410]

Hey thank you. You have helped quite a bit with my LED lighting.

[@r-shot8431]

That is a GOOD upgrade.

[@BoostedMotorsports]

Super bright! 🤟

[@kevinconsuelo]

where can i order these same legs sir because when i click the link and it take me to Amazon it says it can’t be found

[@resoluteblood]

I have a 2000 dodge dakota and I was wondering what headlights you have and where you got them

[@jwages444]

Would these work well in OEM-style housings? They have the reflector bowl.

[@MrBilly1965]

Yes they work on the reflection shield

[@DanD-9mm]

I'm gonna be getting the same casings you got, and the same headlights as well, I have almost the same truck. Thanks man

[@resoluteblood]

What headlights do you have and where did you get them

[@BZizzle]

Very helpful. Do these LEDs have a CANBUS decoder built-in or even need it?

[@thomasjcox]

I would deff get fog light bumper that would improve visibility closer to the front of the truck. And outward.

[@bewhatesyou8923]

Thanks for this video, it helped me out a lot!

[@loripullamma2475]

When you installed the led headlight bulbs did you need to install any canbus decoder for the flickering also how did you get rid of the high beam light on the cluster i installed some led headlight bulbs on my truck my high beam light on my cluster stays on even if i turn off and on the high beams

[@MrBilly1965]

Same issue I had until I put oem bulbs back in.

[@wirefly1000]

That yellow color helps with definition

[@marioarchuleta8723]

A brotha your awsome channelnis addictive .. I habe a 00 durango 5.9 .. An i wish i had a place to do some of the stuff u did .. But i like watching it makes me wanna go torque on.my lady too i have plans ..

[@775Outdoors]

how do you adjust your headlights to point up?

[@NevaLose94]

Yo can I get a link or name on those headlight housings??

[@jasonsmith3943]

Can u put led ligth in the old ligth only change the to led ligth

[@evanhinkle7141]

Ferda boys!

[@chuysilverdeath]

Can’t find the 10k, link takes you to 6k led light bulbs?

[@Krippled-Fisherman]

Hey bud love the content , I was wondering did your aftermarket headlight assembly fit as good as the factory ones , I'm having issues with a big gap around the outside part where the 194 bulb goes , thansk

[@chayanert7780]

Definitely much more visibility and gives the truck a modern looks with those JDM stars

[@BoostedMotorsports]

Thanks brother! It’s a huge improvement and looks even better in person! 🤟🤟🤟

[@c2protect]

I have run into the problem that maybe you can help. I put those in and now when I switch to brights, the dims come on, but the lights are bright. And it's opposite way on dims

[@eileengulotta2917]

I have a question. I know nothing about vehicles but I wanted to do this myself. I've changed the regular bulbs so that's no problem. But Why does everything else I've seen say I need a Conversion Kit? You didn't use one right?

[@jeansandmyshirt]

Hi is it same for dodge ram 2005? Do you need any harness for flicker

[@66Oliver]

These are no longer available. Have you done another set of LEDs for these lenses?

[@nukesaway4806]

It has been 4 years, how many people have you pissed off ?

[@Drauntabuxy]

How'd you get both high and low beams to work? Mine will work with 1 led and 1 halogen or 2 halogens. But as soon as i put 2 leds in it gets stuck on the high beams 2000 dakota

[@huchimoferez5571]

Hello. Nice video. SO I wanted to know how much more heat these will produce over the standard 9007 incandescent bulb? I would like to try these but would like to know this as I just replaced the old headlamp assemblies with brand new ones. I installed the Sylvania 9007 SilverStar bulbs but didn't notice much of a difference so I am returning them. Thanks for the video.

[@willedee3487]

Is the digital pattern on top and bottom (base facing horizontal) or digital pattern left and right (base facing vertical)?

[@MrBilly1965]

I have a question, my LED'S I put on my 99 SLT Dakota my low beams are high and high is low on the switch, with happened I lost my fog light on low beam for they don't work on high beam..any ideas to resolve the problem

[@_Judson]

you have the bulb rotated backwards in the housing

[@MrBilly1965]

@@_Judson in the light housing itself? I'll look at the bulbs for I've already put the stock light back in.

[@FenrisWolfXIII]

i have the same problem. what do you mean i have the bulbs rotated wrong?

[@TboneDuggins]

Did you leave the cups in the headlight? I have tried multiple leds in my aftermarket reflectors very similar to these but they are 2 piece. All of them have had horrible beam pattern

[@seangaskell5302]

I've had the same experience with my Durango headlights. No matter what orientation I had for the LED's I never liked the beam pattern. I ended up ripping them out and going back to Halogens. I went with a set for $180 too so I didn't go cheap cause I didn't want to be disappointed and I still regretted the purchase.

[@TboneDuggins]

@@seangaskell5302 I used cheap ones and then I even bought the 2 Stroke Morimoto, super expensive ones that are supposed to be the only ones that are to be used in reflector housings.... Those got returned

[@ddemier]

@@TboneDuggins I'm having the same problem with Torchbeam led bulbs. Seems like the beam pattern is useless. Did you ever fix the beam pattern.

[@TboneDuggins]

@@ddemier I ended up buying a set of LED headlights from Headlight Revolution. They have amazing products and the ones I got were designed and meant for reflector housings. The beam pattern is not amazing like what you would get from a projector but it's not as scattered all over the place like other LED headlights that I've tried in reflector housings. These ones are also meant not to blind oncoming traffic.

[@allenking4839]

Awesome

[@maxialtamirano.dakenstein392]

I'll tell you something very interesting. I just installed the Leds on my Dakota RT. They work perfect and I connected the fog lights too and when I try to turn on all the lights like I did before it doesn't work anymore. and the check engine came on with codes p0753 and p1765. I didn't know what to do, I couldn't get the fog lights to work and I couldn't turn off the check engine with the scanner. I disconnected the LEDs and put the regular ones on and connected the fog lights again, I connected the scanner and there I was able to delete the check engine. the conclusion that fog lamps and leds do not work well together. I left the leds connected and the fog lights disconnected and there was no problem. what do you recommend?

[@stephenm2749]

What side marker bulbs are those?

[@PajamaSenpai]

4:08 killed me.

[@solofalcon]

dont these give the blinkers a fast blink without a resistor?

[@datdudetrent8938]

Only if your headlights flash too

[@massivebear4005]

I have this same truck mine is a 99. I changed the headlight and put led bulbs in. I also have led turn signals. I have replaced the flasher relay to deal with the fast turn signal due to lower voltage. I have an issue of the head light flashing sometimes when the turn signal is on go for a bit. Have you come across this issue? Any ideas on a fix?

[@rainmaker3700]

Same issue, did you find the cause?

[@naniyo98]

Hey are they better than the Hakari? I got them for the Ram cuz of your vid, now Im interested in changing my other car lights

[@BoostedMotorsports]

These bulbs are super bright and I’ve dealt with the guys at JDMastar one on one and they are super helpful and stand behind their products. You can also give them a call if you want specific info. Ask for Jose if you call he will set you up 💪

[@jamesm.1467]

Would be nice he answered everyone's questions on here...

[@BoostedMotorsports]

James M. Would be nice if you understood I’m one person with thousands of comments

[@jamesm.1467]

@@BoostedMotorsports no worries man, not flaming you...you actually make awesome videos here and some of your videos have helped me in making the decision to upgrade my headlights on my 2000 Durango. My comment wasn't meant to be offensive, I have questions too like everyone else on here and waiting to see the answers. If it came off as offensive, my apologies man...👍👍

[@bobbyrayparris6711]

This will work on my 1996 Dakota? Look like the same input

[@BoostedMotorsports]

If it’s the same plug it should work!

[@crazyscott71]

I have hid lights In my truck and have both high and low

[@michaelrobledo5090]

Scott Ward what brand .?

[@joyroc885]

Yeah but how much power does it give the truck!?

[@BoostedMotorsports]

Like at least 3000hp maybe more! Still need to take it to the dyno 😂

[@joyroc885]

@@BoostedMotorsports Dyno doesn't test the Dakota the Dakota test the Dyno. 😁

[@zzz7zzz9]

@@BoostedMotorsports 3000? Wow. But that was with the aftermarket blinker fluid as well, right?

[@juancarraballo9731]

HID also comes with high & low just so everyone knows.

[@MavoTheGreat]

Idk how I’m just now finding your videos but what motor is that? I feel like I’m just having a brain fart

[@jasonstrongosky2050]

where can i buy these head lights

[@thomasdaum1927]

eBay or Amazon , duh !

[@nicolascuevas1109]

I dig the LED improvements, I literally just picked up a 1999 dodge Dakota, I was wondering what other head light housing is available, I was also wondering what you did for the cluster lights

[@midcoasttractorservice9182]

HAHA My 98 Durango grille is cracked in the same spot!

[@TboneDuggins]

Are those the stock retainer rings? Mine have to be cut down to get my headlight revolution LEDs in. My rings are gray. Yours are black and look slimmer. I would much rather just buy some slimmer ones than modify mine!

[@BoostedMotorsports]

Yeah it’s all stock. Shouldn’t have to cut anything I would hold off. I’m going to be testing another set of 9007 bulbs (the 2005 ram uses the same ones) within the week so keep an eye out for that vid as well 💪

[@TboneDuggins]

@@BoostedMotorsports my retainers are twice as deep as yours, the dont fit over the heatsink see this video - kzbin.info/www/bejne/qIDJkJ6smKpsjKs

[@TboneDuggins]

OK so upon further investigation/realization the rings are from the aftermarket clear housing I installed and the stock originals are on the old housing. I haven't confirmed but I believe they are slimmer.

[@gesvideos]

Hello, just wondering how this worked with the day time running lights?

[@MrBilly1965]

My fogs did not work correctly, ass backwards for I cant stand that 😒

[@moparmaster9344]

I thought you needed to have a conversation kit to run LEDs

[@shadow105720]

These have all that built into the light I think

[@BoostedMotorsports]

No conversion kit needed brother these are plug and play just like you see! Only thing to keep in mind is if your vehicle is newer and has a bulb out warning you will need some adapters but that’s about it!

[@moparmaster9344]

@@BoostedMotorsports alright that's awesome! I have an 03 Durango and have been looking for a good set of headlights and headlight bulbs

[@BoostedMotorsports]

Oh you’ll be fine on an 03 you’ll like these bulbs! I’m changing every single bulb on this truck to LED so stay tuned. I’m halfway done already just editing the vids for you guys but it looks UNREAL!

[@JDMASTARautolighting]

Indeed, most vehicles are plug and play when running our products. Only time you need an adapter, as John mentioned, is if the car has a unique system that gets picky with your LED headlights but nothing we cannot easily remedy through our Decoders. If you have a Dodge, its very common to require them due to pulse width modulation used on low beams.

[@ncimson5318]

Youre comparing LED to Halogen brotha, why not compare LED to LED

[@chavajaimes2978]

1st one

[@Fkidd702]

You can’t say they’re high quality and “ packaged nice “ Because they still look like the same cheap shit from Amazon and eBay for 15$

[@ewbrengle]

Not a fan

[@Fkidd702]

Still crap af patterns