97-01 CR-V RD1 shifter cable removal

How to remove your shicter cable watch all the way please.

[@JoseHernandez-il4dl]

Your video helped me out a lot thanks!!! Was able to get it out nice and easy but the installation was a bit complicated. Did you have any issues with the shifting? Or needed to adjust the cable?

[@Demosworld]

You will have to adjust the cable yes, cause each vehicle wears differently throughout its life cycle so adjustment is required.

[@PHONK_VIBE6996]

​@@Demosworldif it is not adjusted can it cause gear on dashboard i mean when i put in reverse it can move backward but dashboard light dont work properly it s happen only in reverse sometimes if you move gear stick around reverse light on dash is on but not wen you leave it in reverse

[@PHONK_VIBE6996]

​@@Demosworldand it you can pls tell me where can i adjust form that problem

[@owl1873]

My man, thank you for doing the foot work on this task. Your video is greatly appreciated. One question. What was the problem you were having with the A/T shifter.

[@Demosworld]

My cable had frayed through the jacket and snapped due to rust, however it also had some slop, It can be adjusted out though

[@owl1873]

@@Demosworld haven't inspected mine yet.but I'm worried it ain't the cable because it popped out of gear at a red light and when I moved the column shifter I heard grinding like you would expect to here from a manual transmission not a Automatic transmission. I'm going to inspect it tomorrow, wish me luck. God bless.

[@Demosworld]

@owl1873 oof yea im on my 3rd trans now, 2nd was strong but I mad a mistake so now I'm on number 3, but have you done the flush?

[@owl1873]

@@Demosworld No. Picked it up for $700 did the timing belt kit, replaced front upper an lower control arms sway bar links CV axles + the valve cover gasket a few days later it pops out of gear. Engine runs and sounds quite. Easy car to work on DIY'ed it all. I'm good with the tools.

[@Lawheeldrive]

Thank you so much sir.

[@kingtwizzle9363]

Thanks for the video

[@nesisalazar5635]

Nice job

[@billraleigh4529]

respect!

[@user-gn3it6le7x]

How did u get the nut off under the steering column

[@marcuscamorlinga1789]

What is the plate called that’s covering the shifter cable by the transmission? Hit a big pothole and cracked it in pieces(car is lowered). Can’t find it anywhere online. Going to hit the local pick a part and get a used one. Going to use your video as my guide. Wish me luck lol

[@Demosworld]

www.hondaautopartswarehouse.com/oem-parts/honda-cover-control-wire-24901p4t000?c=Zz10cmFuc21pc3Npb24tYXV0b21hdGljJnM9YXQtYXRmLXBpcGUtc3BlZWRvbWV0ZXItZ2Vhci00d2QmbD0yJm49QXNzZW1ibGllcyBQYWdlJmE9aG9uZGEmbz1jci12Jnk9MTk5OCZ0PWV4JmU9Mi0wbC1sNC1nYXM%3D Control wire cover, discontinued but you might be able to find it on ebay, that's the part and part number. Hope you figure it out. Thanks for the support 🤘🏻.

[@marcuscamorlinga1789]

Thank you appreciate it. Going to stay and check out your content

[@Demosworld]

@@marcuscamorlinga1789 appreciate you brother

[@King_Kong_Ek9]

Where is this?? All the u pull it yards that I go to the crv’s are shredded and down to the bare bone

[@Demosworld]

I live in Maryland I usually hit this chain they're across the country the yard is called "LKQ pick your part"

[@judiosan]

Hi Demos's World, Could you help me get a cable shifter like that? or some website where I can buy it. Thanks!!

[@Demosworld]

What do you need just the cable or the whole assembly?

[@judiosan]

@@Demosworld at the moment only the cable which is what seems to be failing.

[@Demosworld]

www.hondapartsnow.com/page_product/searchbyname?vin=&make=Honda&model=CR-V&year=1998&submodel=&extra1=5%20Door%20LX%20(4WD)&extra2=KA%204AT&filter=()&keywords=Shift%20cable From Honda

[@Demosworld]

Other than that you're welcome to search on your own This is ypu P/N: 54315-S10-A82 And if you want to find one on ebay just look up 97-01 Honda CRV auto shifter cable

[@fvcknzayyy1782]

My 98 RD1 just messed up this past Saturday. Drive shaft and shift cable got chewed up. Is installation for cable somewhat difficult?

[@liboy9844]

6:13 careful with that improvised ‘jackstand’. Your mother is waiting for you.

[@Demosworld]

That's how they put them in our yards out here, there's 4 per car, but if it doesn't look stable I won't mess with it, appreciate your concern.

[@Michal_S0L]

Same for my area sometimes the wheels sink into the dirt

[@owl1873]

@@Demosworld same in California, what ever they can weld together to make a stand.

[@bestofthebest6068]

hello. where can i find such a cable? and how much does it cost?

[@Demosworld]

So you can either look it up on ebay or another part website such as rockauto, parts geek, etc. Ne personally spending on the part and how crucial it is I will go through honda autoparts warehouse, but other than that advance may have them, or a junkyard for sure just look up a "Honda (whatever year crv you have) crv automatic shift selector cable" and the results should come up

[@bestofthebest6068]

can you post a link to the site?

[@Demosworld]

@@bestofthebest6068 I suppose, what year is your crv?

[@lilfella8955]

Not sure why but took my Crv to the shop to get a rack and pinion done and got it back and now it’s really stiff when I try to put it in drive

[@Demosworld]

You can adjust the cable to shift the trans, however if they routed it wrong or the cable got rusted and broke internally that would cause it too.

[@stephiecee7232]

I can’t get out of park. I took everything apart besides the cable. I recovering from open heart surgery and in a stuck position. Ahhhhh

[@Demosworld]

Sorry for the late reply, but you should be able to shift it out of gear by either adjusting the tensioner on the cable, or shifting it from the transmission itself, the reason it's stuck though is most likely because you have the same situation as me where the jacket on the cable has split and the cable just pushes out of the split instead of applying force to the shift lever, it has snapped, or is bound up and needs adjustment, so either needs to be adjusted or replaced, hope this helps, and hope you recovered well 🤙🏻.

[@stephiecee7232]

Anyone in the tri state area? NYC NJ? My car is in a tight position also

[@Demosworld]

?

[@stephiecee7232]

I had posted on previous question I think my car won’t shift out of park I took the plastic column off, all those pieces are moving in that area so where i believe it’s the shift linkage cable. And praying not the gears Inside the tranny however that’s a strong possibility. My Rhonda tashonda for her 21st birthday 🥲🥲😅

[@stephiecee7232]

@@Demosworld the tight position is. The front end is up against the parking lot fence with curb

[@Demosworld]

@stephie cee I gotcha well you can try 3 things the first one which is the safer way, there's a slot on top of the steering column made so you can insert a key when you do that it pushes down a white plastic tab that should allow you to shift it out of gear, the second way which I'm not 100% sure if it would work or not I'm just guessing based on how the cable operates, take off the cable cover on the trans and see if you can manually get the slide pin that moves when attached to the cable to move with like a screw driver or something that can fit in the hole the cable attaches to, it should move fairly easy, the third and last option if you have no others, is disconnect the rear drive shaft if you have a rt4wd if it fwd then don't worry about that, get the front wheels on some car dollies you can pick them up at harbor freight, from there as long as the rear wheels aren't locked up from sitting you should be able to push it back from the fence line to further investigate your issue. Hope any of these suggestions helped 🤙🏻

[@stephiecee7232]

@@Demosworld I got it!!!! It was the brake. Had to really force it down! What is that issue?

[@stupidsnek]

Doesn't look like my 97

[@Demosworld]

Well idk what to tell you, as far as I know all the rd1's are the same but mines a 98 🤷🏻‍♂️

[@hosocat1410]

I hate working on cars owned by cat people. Filthy cat hair gets everywhere.