Honda CRV | key stuck in ignition/ shifter problem FIX!!!

[@Wrenchlife604]

IF This video helped you out and saved you some money. if you wish to donate to help support the channel. So i can keep creating videos. feel free to donate to my streamlab link: :) :) streamlabs.com/dawg316/tip

[@oliviakramer3898]

Wrench life 604, where does one purchase a neutral safety range switch? Having a hard time finding one for the ‘98 online.

[@PaulBoscia]

You fixed my issue bro !!! Sweet relief grateful you posted this video

[@slingshot456]

does the neutral safety switch has to be align probably or hold does it needs to be align ?

[@slingshot456]

Do you have a video or recommend a video of how to properly put in the neutral safety switch back onto the transmission?

[@patriciapatrician6516]

Where does the other end of that wire connect to? Is it a nearly impossible to reach place? Or is it easy to reach?

[@johnnyplurlife]

My car will go into all gears expect drive. Would this sensor have anything to do with my problem ??

[@anthonyorona9947]

Hi men really need help my crv 2001 stock in parking when I push break pedal I don’t hear tick tick I just replaced tps sensor and now I can’t move de car

[@Wrenchlife604]

See if the brake lights come on when u hit the brake pedal. If they do not. Then u need to check the brake pedal switch or wiring. The brake pedal needs to be pressed. For the car to go into gear

[@who_wantsit]

My CRV Gen. 1 will not go into park and it seems to be stuck in between gears, because it is slipping. I'm going to try this first. Thank you!

[@Ajdc2]

I’m having the same issues where it won’t go into park. All other gears except park. Did this fix the issue?

[@khemrajpersaud8282]

So I did replace it but it worked for a day then it stopped working any ideas

[@BE74297]

Did you figure it out and please share details, thanks.

[@khemrajpersaud8282]

@@BE74297 yeah I figured it check your gear shift to see if anything blocking it , that’s what happened to mines there was a hair tie stuck in it.

[@BE74297]

@@khemrajpersaud8282 thank you

[@feliciacrosson8661]

@@khemrajpersaud8282 how did you find hair ties in there? sorry, I am going through the same thing with my brothers car now and not sure how to check if things are blocking the shifter.

[@VictoriaMarie08]

This video is very helpful, I will try this now. I wish I could see how exactly I would remove the top of the harness. I don't know if that was shown...wish me luck

[@nomakulit]

Bro I need help really bad. I use my CRV '99 to go to work but now I can't. At first, I can switch into gears but I do have to press the shift lock release I can't put it into park that's why I put it in neutral then turn off the ignition, then remove the negative connection on the battery then release the key. But now, it has gotten worse, I can't switch into any gears and luckily, it got stucked into the neutral gear so I can still push it. This happened after a mechanic fixed the brake lights. Any thoughts?

[@Wrenchlife604]

The brake pedal switch is used to shift out of park. So maybe was an issue at first with the brake pedal switch. The connector to the switch or maybe the adjustment of the brake pedal switch. If ur stop lights are not coming on when you hit the brakes that may be your issue. I dont know why your car wont shift out of neutral rn. The shift lock release should work.

[@spectacxx613]

Yoo I’m having the same problem bro that’s crazy I got a Honda Crv 2000 Same problem literally have you fix yours ????

[@lucha3149]

Holy shit I thought I would never find and info on this issue. In my case the wiring harness got disconnected and then dropped down and got shredded by the cv axel.

[@SleepWarz]

This helped me thank you very much. Battery trick and yeah i had replaced the transmission myself a few months back

[@jenhoffman6052]

I don't know much about fixing cars so i need help. What exact tools do you need to uninstall this and re install it? so i can buy those tools? and when i re install it i just pop it back on the metal thing sticking out? thank you. I have a 2001 honda crv ex 4wd btw, 1st gen. I just tryed to start it wont start and key wont come out. when i turn the key to on it says its in drive even tho its in park so im assuming this is the problem. However i will disconnect the battery in the morning hopfully its just a bad signal or something. But yes what tools did you need to uninstall the part. Thanks.

[@Wrenchlife604]

Think you need a 10 mm socket and a socket wrench. Your problems might be that the sensor isnt in the park position. You might need to turn it so its in park then install it back onto the transmission

[@jenhoffman6052]

@@Wrenchlife604 is it easy to turn by the way?

[@lawrenceanderson6167]

exactly where did that ear belong? I don't see in the video where it came off

[@Wrenchlife604]

it was apart of the switch. it broke off.

[@patriciapatrician6516]

can you do this without removing the transmission from the car?

[@Wrenchlife604]

Yes . Supereasy to do

[@CuteIzzy66]

My CR-V has been having this annoying ass issue lately. What does my mechanic have to do to fix this issue???

[@antonioemmanuel4758]

I need assistance Im having a problem where the van shifts into the park gear but not Engaging it is only remaining in reverse and reading reverse In order to change gears i have to press the shift release button What do i do and how to i know if the transmission range switch it good or not

[@normanturnbull7967]

Slam dunk great video fixed my issue

[@Zackklein123]

If the key comes out when the battery is disconnected only is that part my issue then? Thanks

[@Wrenchlife604]

could be.

[@pamcha937]

What is that piece called?

[@Wrenchlife604]

Sometimes called a range switch. Others call it a park neutral switch. Id call it a transmission range switch tho

[@joshmitchell795]

It's a neutral safety switch if you go to buy it at a store that's what you need to look up

[@therealboofighter]

I like the second Gen restyle better, if money was not an issue I would get one a put a turbo on it.

[@Wrenchlife604]

turning it into a worktruck / parts hauler. got 2 videos already shot for it. stayed tuned

[@macmac2767]

Indicate years this affects. Please show exactly what problem you are having

[@jayramirez9680]

What if I’m at the store and I don’t have tools 😭😭

[@Wrenchlife604]

Then ur screwed bud

[@brandonseepersad3527]

Having this problem like right now

[@Wrenchlife604]

Let me know if it fixes your issue 👍

[@brilive9797]

Excellent video, thank you..

[@UA7SquadVlogs]

Good Insite my guy 💯

[@JonesVideosTV]

Hit the shifter just happend to me honda crv 2010 hit bottom (to uo)

[@bekalubilut928]

Dude thank you so much, you have no idea this comment saved me, God bless you. Jesus Christ is lord, he got you just believe in him 🙏🏽🙏🏽

[@JonesVideosTV]

@@bekalubilut928 took me like 2 hours, i was worrying then out of frustration I started to hit the shifter then it worked! Thank you! God bless you too

[@ant8729]

Anyone can help me on why the car wont stay in park unless the ebrake is on

[@Wrenchlife604]

With the shift lever in park. Can you take your keys out of the igniton or no?

[@orlandodiaz4504]

Did you ever gotten fix?

[@ant8729]

Orlando Díaz Didnt have the time to mess with it so sold the car

[@osooyabun2701]

I just added some wd40 when the key gets stuck

[@cottoautorepairservicellc1866]

thank you

[@dameonarbuckle]

I have a Honda CRV 2003 stuck in park. Change neutral position sensor , brake switch , also changed manifold rail position sensor. I got a code p1077 I did everything you said I'm still stuck in park. When I press the release switch on shifter it goes into limp mode 20 miles per hour 3000 RPMs. I really need your help🙏🙏?? I've had mechanic shops with choose to touch it.

[@Wrenchlife604]

Is the vehicle currenty stuck in park or will it go into gear if u hit the release switch. Its kinda unclear what you are saying

[@ryanpham3308]

99-01 CR-V doesn't have this issue. They changed the automatic transmission (even though it's still a 4-speed :P) that MY.

[@Wrenchlife604]

The red crv in this video is a 2000.

[@ryanpham3308]

@@Wrenchlife604, then I must be lucky.

[@humanbeingfromearth]

My 2001 has this issue currently. The column won't go into park. If u try, u end up with the shiftlock on(easy to reset) it's as if the cable won't reach a position

[@javanfigueroa9822]

@@humanbeingfromearth mines too. So is this the problem lol.